Pa30 screen contract area
hi,
I want to hide or delete contract area in PA30 screen.
from tabel rp50g ccntr area.when I look from technical settings.
screen field is also rp50g-ccntr.
does anybody have any idea about this problem,
thanks,
You can go to SM30>>Table>>V_T588M (View for Infotype Screen Control)
and use following parameters:
Module Pool::MP000100,
Standard screen 2000
Feature:: P0001
Alternative screen 2000
Grp::014
Field name::P0001-ANSVH::Work Contract
and choose radio buttion HIDE
Incase you have any query please contact.
Rajesh Waghade
Similar Messages
-
Hiding a field in PA30 screen(for inoftype 0001)
Hi All,
I have an requirement that i have to hide a Cost center field in PA30 - for infotype 0001 .
I have maintained v_t588m in SM31 for screen 2000 i have selected the costcenter radiobutton to hide and saved but the changes are not effecting to the PA30 screen
and one more thing again am going and checking to this view the changes are not saved in the view.
Is i have to create new feature for this one ? if created,is have to maintain anything?
Please help on this.
Thanks & Regards,
Anil Kumar.P0001 Organizational Assignment Infotype (0001): Screen Control Status: Active
5 <b>TCLAS</b> Transaction class for data storage
5 <b>A</b> Master data and time data
5 <b>MOLGA</b> Country Grouping
4 01 Germany
4 07 Canada
4 09 Denmark (DAENEMARK)
4 10 USA
4 16 South Africa
4 22 Japan (JAPAN)
4 23 Sweden (SCHWEDEN)
4 29 Argentina (ARGENTINA)
4 34 Indonesia (INDONESIA)
4 37 Brazil
5 <b>40</b> India
5 <b>DYNNR</b> Number of the following screen
5 2000
5 <b>3000</b>
5 <b>PERSK</b> (1) Employee Subgroup
5 O
<b>OE</b>
5 otherwise
4 48 Philippines (PHILIPPINES)
4 otherwise
4 B Applicant data
The Exp Shows for Country India(40) For Dynnr 3000 for Employee Subgroup 0 my Variable is OE.
This is the way U sud search for Variable.
~BiSu
Message was edited by:
Biswajit Das
Message was edited by:
Biswajit Das -
Field ENAME is missing in PA40 and PA30 Screens
Hi All,
Field ENAME (Formatted Name of Employee or Applicant) is missing in PA40 and PA30 screens.
Please let me know how to have this field on the screens.
Setting so far I have made:
Screen header in Table V_582A_B is u201C00u201D for IT 0000, IT 0001
Assigned u201800u2019 Header Modifier to Screen Header u201C00u201D in table V_T588I
I have defined header Modifier (T588J) as
HM -L - C - IT - Field N - Fldty
00 1 01 0001 ENAME DD1
00 1 14 0001 ENAME DAT
00 2 01 0001 PERSG DD2
00 2 14 0001 PERSG DAT
00 2 17 0001 PERSG DTX
I have checked the relevant boxes in table T588H
Thanks in advance,
JitendDear Jiten,
DD1--Name (Length 10)
DAT--Field contents (Length 40)
DTX--Text for field content (Length 30)
the above are the field types we have in t588j table
and you are missing the DTX field type
maintain the 00 1 17 0001 ENAME DTX
HM -L - C - IT - Field N - Fldty
00 1 01 0001 ENAME DD1
00 1 14 0001 ENAME DAT
INSERT HERE
00 2 01 0001 PERSG DD2
00 2 14 0001 PERSG DAT
00 2 17 0001 PERSG DTX
hope this will help,
Regards,
mohammed
Edited by: 0mohammed1 on Aug 18, 2011 12:46 PM -
Hi,
How can I change the default fields that appear under Personnel No field on PA30 screen ? e.g. Name, EE group, EE subgroup, PA, PSA.
Thanks in advance.'DAT': field contents
'DTX': field content text (if available)
'PIC': passport photo
'DD1': field short text according to DDIC
'DD2': middle field text according to DDIC
'DD3': long field text according to DDIC
'DD4': field header according to DDIC
Note that you can only use the 'PIC' field type for the PERNR field. SAP recommends that you enter the personal data infotype (0002) in the ITyp (infotype) field for the passprt photo.
Also note that the field types 'TXT' and 'TXD' are only available for compatibility reasons. SAP recommends that you use the field types 'DD1' and 'DD4' instead.
Hope this gives more idea abt the fields...
REgards
...Sadhu -
I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
Here is what the etrecheck results are:
Problem description:
slow at start up, screen is distorted while logging in, it is fine after
EtreCheck version: 2.1.8 (121)
Report generated April 5, 2015 at 9:42:01 AM PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 297
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:7:0
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
Startup Items: ℹ️
HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist [Click for details]
Launch Agents: ℹ️
[not loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.hp.help.tocgenerator.plist [Click for support]
[not loaded] com.logmein.LMILaunchAgentFixer.plist [Click for support]
[not loaded] com.logmein.logmeingui.plist [Click for support]
[not loaded] com.logmein.logmeinguiagent.plist [Click for support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Click for support]
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist [Click for support]
[not loaded] com.google.keystone.daemon.plist [Click for support]
[not loaded] com.logmein.logmeinblanker.plist [Click for support]
[not loaded] com.logmein.logmeinserver.plist [Click for support]
[not loaded] com.logmein.raupdate.plist [Click for support]
[not loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist [Click for support]
[not loaded] com.facebook.videochat.[redacted].plist [Click for support]
[not loaded] com.google.GoogleContactSyncAgent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
HPEventHandler Application (/Library/Printers/hp/hpio/HPEventHandler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
LogMeInSafari64: Version: 1.0.660 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeIn: Version: 1.0.660 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
LogMeInSafari32: Version: 1.0.660 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 10.0.1 [Click for support]
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
7% ocspd
4% WindowServer
1% kextd
0% ps
0% securityd
Top Processes by Memory: ℹ️
137 MB Microsoft Word
120 MB Safari
86 MB ocspd
82 MB CalendarAgent
77 MB WindowServer
Virtual Memory Information: ℹ️
310 MB Free RAM
1.89 GB Active RAM
1.55 GB Inactive RAM
544 MB Wired RAM
1.13 GB Page-ins
8 KB Page-outs
Diagnostics Information: ℹ️
Apr 5, 2015, 09:32:47 AM Self test - passed
Apr 5, 2015, 09:30:05 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
Apr 4, 2015, 01:12:41 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
Apr 4, 2015, 08:13:57 AM /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crashReinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks
Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception. If that is the case then I am happy as a Pig in Mud
I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
Many Thanks
Nick -
I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?
In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device -
Screen values are not retained in Tcode BP, onclick of SAVE button
Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.OSS Note 1254214 is applied and it is solved.
-
I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio CesarNot that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.
-
Want to show an information message in PA30 screen
Hi ABAP gurus,
For Infotype9000,subtype RHUB(newly configured) ,I want to show an information message in PA30 initial screen for operations 'Create','Copy' and 'Delete'. For that , I have used a BADI (hrpad00infty) , written code in PBO method of the BADI.
The problem is this, we cannot show the message in PA30 screen,else it is showing a pop-up dialog box (information msg. is missing in the dialog box) in the next screen.
Our Requirement:
1. For the above mentioned operations , we want to show the information message in the PA30 initial screen.
Please post your valuable comments.Hi
What you're trying to do is not really obvious for someone that's familiar with the usual USER-EXITs and BADIs in HR but there's a possible workaround using the BADI HR_F4_GET_SUBTYPE and its GET_SUBTYPE_TEXT method for your 9000 IT
METHOD if_ex_hr_f4_get_subtype~get_subtype_text.
*SUBTY Importing Type SUBTY
*PERSNR Importing Type PERNR_D
*TCLAS Importing Type TCLAS
*BEGDA Importing Type DATUM
*ENDDA Importing Type DATUM
*LANGU Importing Type SPRSL
*MOLGA Importing Type MOLGA
*FLT_VAL Importing Type INFTYPA
*STEXT Exporting Type SBTTX
FIELD-SYMBOLS <rp50g> TYPE rp50g.
ASSIGN: ('(SAPMP50A)RP50G') TO <rp50g>.
IF sy-subrc EQ 0.
IF <rp50g>-infty EQ '9000' AND
<rp50g>-subty EQ 'RHUB' AND
( sy-ucomm EQ 'INS' OR
sy-ucomm EQ 'COP' OR
sy-ucomm EQ 'DEL' ).
MESSAGE i398(00) WITH 'Your message'.
ENDIF.
ENDIF.
ENDMETHOD. -
Purchase info record and Contract are not reflected in SC
Hi...
while i am creating a shopping cart in SRM for a particular product... i am not able to find the Purchase info record or Contract in SC - Source of supply tab...
I maintained the Purchase info record and Contract for the particular material in Backend(4.7n).
Plz throw some lights on this...
thx....Hi
if you are using classic scenario it might have dispalyed in SOS.
check info records/contracts are existed in backend for your product in srm?
is your cart is special request(describe requirement ) or internal goods and services?
if you are in ecs mode. it is not possible to see your inforecord/ backend contract in srm sos window
regards
muthu -
ST06 Screen values are not showing as ecpected
Hi Experts,
ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
All fileds are showing "Zero Values" since last week and i just found tht today.
I Went to
SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
Compare recent days for server cambsvr13 Date/time 27.06.2008 13:40:31
Average values for peak workload
Date Usr Sys Idl Pages in/h Pages out/h Swap space Lan packets/h Lan errors/h
avg avg avg max avg max avg max size min free max avg max avg
20080626 0 0 0 0 0 0 0 0 0 0 0 0 0
20080625 0 0 0 0 0 0 0 0 0 0 0 0 0
20080624 0 0 0 0 0 0 0 0 0 0 0 0 0
20080623 0 0 0 0 0 0 0 0 0 0 0 0 0
20080622 0 0 0 0 0 0 0 0 0 0 0 0 0
20080621 0 0 0 0 0 0 0 0 0 0 0 0 0
20080620 0 0 0 0 0 0 0 0 0 0 0 0 0
20080619 0 0 0 0 0 0 0 0 0 0 0 0 0
20080618 0 0 0 0 0 0 0 0 0 0 0 0 0
20080617 0 0 99 17,240 9,685 97,730 97,575 10485,760 9,023,492 22,430 21,205 0 0
20080616 0 0 99 7,260 3,978 101,340 97,418 10485,760 9,057,327 21,940 19,447 0 0
20080615 0 0 99 1,390 1,088 101,330
99,113 10485,760 9,162,058 16,199 15,970 0 0
Best Regards,
VinodTry stopping the SAPOSCOL NT service. Then, copy this folder (making a backup):
installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
Then, clear out everything inside of installdrive\usr\sap\prfclog
Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check. -
Hi All,
When I am going to MIRO system is showing the Message (#00118) Screen output area too small.
and the screen will become blank.
Please guide me.
Thanks in advance.
Pavan H Shi
take help of abaper and try activating the screen program for MIRO in se51
regards
kunal -
I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??
iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive. -
Hello All,
I have different documents for different infotypes, which is stored via DMS for a employee.
Now i want to provide the link in PA30 screen for an employee, for different infotypes.
Different link for different infotype.
Question is, how do i call the link from the pa30 screen.
Thanks,
Kunal.Is there any kind of exits or object services can be used for the same.
Maybe you are looking for
-
Get old item name for renamed files using TFS API
My current tfs will be retired in next few months.I am using tfs api to create a parallel tfs on a new server from the existing one. I have folders and solutions that have been renamed. I am iterating items and based on their changetype(add, edit, de
-
How do I set the f stop when I mount my 650-1300 telephoto lens via t-mount?
Camera says no lens attached? Solved! Go to Solution.
-
Problems on Portal after patch 23 ITS 6.20
Hi, An error on Portal occurs after apply patch 23 of ITS 6.20. The HR pages lost the configuration. Our stack of R/3 is 27 Portal is 6 6.20. Do you have any idea what can I do to solve this problem? Thanks, Nivia
-
how to print 2d barcode in smartforms
-
Cant send mail through Icloud in browser
I have tried other browsers and I have tried to send email outs from icloud.com but it displays a message "email cannot be sent at this time". I can send emails fine from my Iphone but not from my browser. Is there something I need to do or is it on