PA40 Client 007 'not modifiable'

Dear Sir/Madam,
When I use pa40 to hiring someone, the system give me the message box which mentioned
'Client 007 'not modifiable''.
But I think for master data maintain, system should not check the client's status.
Is there any suggestion to change it?
Thanks for your reply.

Hi Yichao,
007 is defined to be the "SAP Reference" client through SCC4 transaction and "No changes allowed" & "No overwriting allowed" in the respective client.
Pls contact with your Basis people.
Regards,
Dilek

Similar Messages

Modifying 0VTC and 0VRF trasnactions when client is not modifiable

hi
we are uploading 0VTV and 0VRF transactions using a BDC logic. in development the change asks for a transport request. now when we moved into production the client settings in SCC4 are "client not modifiable" so we were not able to update the transactions.
how do i make my logic work without changing the SCC4 settings. i read about "current setting" in SPRO--> Define Routes and Stages->maint objects. i have done this setting for both 0VTC and 0vrf. just make sure that this will solve our problem we have made the development system SCC4 settings same as prod system ( client not modifiable). but still i am getting the client modifiable error. is there any other setting i need to do or any thing wrong with the way i did the "current setting" setting. please let me know.
thanks

Hi,
I have a client who has a requirement to use these transactions as master data in production too.
Could you please share the OSS Note/s that can achieve this?
Cheers,
Andrew.

Production Client 700 not modifiable

Guys,
I need to upload trial balances in my production client thru LSMW.and in testing in QA, I got the error msg. for tax line items exceeding 999 and I had to turn off the taxware which dteremines the taxlineitems line by line.So I was able to upload trial balances in QA after that.Now I need to upload in production and in production client is set to "Not Modifiable".I just need to turn off taxware only, and afterwards I will put production client back to the previous status.Anyone please suggest me how to do it in production.Thanks
Regrads
Shaun

Hi,
You can switch off the flag in SCC4 transaction or via maintainance of T000 table. But, you'd better coordinate it with your BASIS/ABAP team, because normally it should be allowed only with their permission.
Regards,
Eli

RE: Client Not Modifiable for Z Tables

Hi all,
One of our developer created 3 custom Ztables, when he is testing in testing environment, he is able to modify 2 of them using SM30, but for one table it says "Client status not modifiable". i checked his profile and he got access to SM30 and also to S_TABU_CLI--> Allowed (X).
I dont know why it is not allowing this table to change and allows other tables to change ( I dont think this is any thing wrong with his authorization)
I also checked in SE11 and his delivery class is type "A" like the other 2 tables.
what else i need to check?
thanks,
Sun
Edited by: sun on Nov 19, 2008 3:53 PM

There was a little bug in SOBJ a while ago which let you change the owner of the object in a development system without transporting. But that should be fixed - as it is simply not an option anymore, also in a production system.
The better (more transparent) option in my opinion is to use the current settings flag if these tables are going to serve a "customizing" type function of the application and you want the flexibility to change them system specifically within your landscape without having to transport it and not wanting to open the (productive or test) client just to make a change of something non-critical for the application.
But you need to pick and choose them carefully. There are also some other settings which you might want to tighten the control on - for example very application sensitive master data.
Now I don't know what these tables are used for, but you did mention S_TABU_CLI being required so they are even client independent (most likely)... at least as far as their maintenance is to be concerned.
As you are asking this in the security forum (and not the ABAP or Data Dictionary forums), you might want to review the technical design of this solution...
It is not unknown that the developer and customizing roles find their way to production and used there with reliance on the SCC4 client settings either, and as these are client dependent... what are the settings of the other clients and the authority of the users in them?
But that is up to you. Certainly training and experience helps as well (which includes learning the hard way
I prefer the current settings to the client settings where the "use case" is justified.
Cheers,
Julius
ps: The one table which could not be changed, was it being changed from a different client than the other two?

CLIENT 600 HAS STATUS NOT MODIFIABLE

Hi SDN,
I gotone problem related to SM30.While user trying to upload the table he will get the message like <b>CLIENT 600 HAS STATUS NOT MODIFIABLE</b>. Could you please provide me the solution and reason for this message? I will be very great ful and thank ful for the answers..
Appreciation for the answers..
Regards,
Kumar

Hi,
This thread has answer to your question...check it out...
How do SM30 Update when client is "not modifiable" ?
assign points if helpful...

Client not modifiable? Where to check first?

Hello Guys,
Just want to check, if it says Client xxx not modifiable, should this mean client be set to Productive mode in SCC4? Or any other settings?
What if client is already Productive in SCC4 but still giving the error Client xxx not modifiable?
Regards,
jennah

Hello Jennah,
Please read more on Client concepts.
Especially multi client administration.
Check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/fa/08443c4a08dd37e10000000a114084/frameset.htm
Also,
If your question is answered, please mark the question as answered.
Regards,
Siddhesh

Maintaing tables when client not modifiable

There is a field you can check on a table that allows the table to be modified when a client is not modifiable. Any help on how this is done would be appreciated.
Thanks,
Bob

Hi Bob,
Have a look at SAP note 77430 and 356483. They should provide the solution for your problem!
Regards,
Lars

IDOC HRMD_A Client Has Status 'Not Modifiable'

Hi all,
I'm working with the HRMD_A07 Idoc.
The status is green, but the data are not loaded in the system.
It is possible that this situation is related to the status of the system that is 'Not Modifiable' ?
If I create a record in the PA30 I'm getting an error message about the status 'Not Modifiable' of the system, but at the end I manage to save the data.
thx

Hi Gabriel
For this u have 2 solution
1. Temporary
Every time you need to open client using SCC4 & SE06. After that u have to close the client.
2. Permanent
You have to talk to your ABAPer to have a customized Tcode for the REAJINDX.
Regards
Abhishek Tiwari

Client 000 has status not modifiable

Dear all,
after installing ABAP and JAVA stacks I can normally
work in both system (NSP, J2E). I created a RFC function module via se37 to use it as a basis for a web service.
But when I try to release my web service for SOAP runtime using TA WSCONFIG I always get an error message: <b>Client 000 has status not modifiable</b>...
Are there any restrictions or did I make a mistake?
Thank you

hi Harald,
Did you make a client copy after your ABAP installation? SAP doesn't allow you to work on 000 client. so you need to make a copy of 000 (say 111 or any other number)and continue to install your JAVA Stack on this CLIENT. i guess you had put your JAVA stack on 000 itself. that's the problem.
Just make a new client or "Client Copy". and Put a java stack on that client. Remove the old java stack. This should solve your problem.
Regards
Arun

Client not modifiable message while executing t-code ops7 and ops6

Hi Guru's,
I am getting "Client not modifiable message while executing t-code ops7 and ops6" in Unit test and Quality client.
Pleae help me to resolve the error.
Regards
Sasikanth Reddy

Hi
Copy of the information I found regarding this issue:
It is possible to allow the maintenance of 'Customizing'-tables in a
production client, even if the client is set to 'not modifiable'.
Normally this should be the case for tables TCJ04 (responsible person)
and TCJ05 (applicant).
Please could you check the settings in your system and change it if
necessary:
Transaction SE11:
Table TCJ04: delivery class should be set to 'C'
      TCJ05: delivery class should be set to 'C'
Transaction SOBJ -> Maintain
Position on V_TCJ04: Category should be 'CUST' field 'current settings'
should be marked.
Position on V_TCJ05: Category should be 'CUST' field 'current settings'
Please also check that your client is defined as 'PRODUCTIVE' via
transaction SCC4 (field client role).
I would also recommend that you review the attached notes with reference
to the usage of customizing setting "current settings": Nr. 77430,
Nr. 135028, Nr. 356483. These are also relevant for your release.
Kind regards,
Zhenbo

Tables can be maintained even though Client has status 'not modifiable" ?

I am looking, list of tables which i can maintain directly even though "Client has status 'not modifiable'" status
example : T000
Rgds

No ..No...Siddesh,
You are understanding my requirement in reverse.
We are now not in execution of giving the access.
i regret, if i am failing to explain my requirement
A Auditor wants
a). He wanted to know the users having S_TABU_DIS auth object with 02 value and assigned authroization groups.
b). He wanted list of tables including Z tables that can be maintained directly thru maintenance view
Auditor will do some excerse Directly Maintained Tables (vs) Authroized users
He will come back with a list of tables for which we have to give the logs.
I tried my best to explain my requirement.
To summarise - I repeat i am looking "List of Tables that can be maintained directly - When Client has status 'not modifiable" ?
Thanks in advance for your time for this query.
Rgds

Maintain the values - Client 'Not Modifiable'

Hi,
I have created a table Y1260. It has three fields namely MANDT, WERKS and FLAG.
I have given Delivery Class = 'C' and Maintainance allowed.
Under technical settings, Data Class = 'APPL2' and Size category as 0.
Buffering is set 'OFF'.
Under Table Maint., Authorization Group is &NC&.
When I go to SM30 for maintaining the values, it is not allowing me stating that .. Client 010 has status 'not modifiable'.
Please help me to solve this issue.
Thanks in advance.

Hi,
You have given deleivery class 'C' which means customizing table, maintenance only by cust., not SAP import..
Try to change it to 'A'.
Regards.
Mudit

Client not modifiable

Hello,
When i am executing the transaction code OAAQ in production server it is working fine but when i am trying in quality server it says client 100 is not modiable where as both client settings are same in QA and PROD in SCC4.
When i made QA as modiable manual and then it is working fine...
I would like to know is there any config setting becase of that it is not working or is there any problem Basis side
Thanks in advance.
Regards,
Krushna biswal

Hello,
I have found the solution for it.
If the client role is "PRODUCTION" in SCC4 then it work fine, if it is other than "PRODUCTIOn" role then we need to change to modifiable client then only it will work, otherise, "Client XXX is not modifiable" messge will occured.
Regards,
Krushna Biswal

FSE2-client status is not modifiable

Hi Experts,
Everytime i run t-code FSE2(Change Financial Statement version, this message always appeared..
" ClIent ... has status "not modifiable""
Is there any t-code to make this modifiable?
Please advise...
Thanks
rey

Hi Rey,
In which client are you trying to do this change?
Normally this change needs to be done in the development client & transported to production client.
That is why this error appears.
If you want to change this setting, contact you BASIS consultant.
Regards,
Inoka

BBPSTART field "client" not modifyable - only visible

Hello,
I would like to know how I can leave the field "Client" in the BBPSTART screen as not modifyable. (or supress it)
Is it possble to supress the ticbox option: accessibility (on the same start screen to enter SRM)?
Thanks for any reply.
Aart

Hi Aart,
Please have a look at Internet Transaction: BBPGLOBAL
Screen: LOGIN.html
I feel that making few changes to HTML code may bring out the desired results.
Hope this helps.
Thanks,
Pradeep

PA40 Client 007 'not modifiable'

Similar Messages

Maybe you are looking for