PA40-Employee Number Range sequence

Hi,
i was making an Entry in PA40,direct hiring and just opened the first screen where empcode is auto generated
and no details could be entered and were not even saved and 2 empocodes were missed i.e 98580 and 98581
But now when i am trying to re enter that same employee code system gives error message of Number range
how can i go back to the same Empcode Number which was auto generated,now the Interval range is showing the next empcode i.e. 98582
pls help

Dear All,
Problem has been resolved.
In PA04, I simply made the Current employee series as External and remove the Current value and saved
after manually entry in PA40 saved those mmissed employee code
again made the series as Internal and saved.
Ragards,
puja

Similar Messages

  • Internal sales employee number range

    Dear experts,
    Under the same client in SAP system, different company codes can NOT have different Internal sales employee number ranges in the standard SAP, right? In other words, only one number range actiavtes for all the company codes as long as they are against the same client.
    Plz corret me if I'm wrong. Many thanks.
    Example:
    log on SAP - client 800
    client 800 has 2 company codes: 1001, 1002
    Request:
    sales employee under company code 1001: 10xxxxx
    sales employee under company code 1002: 20xxxxx
    ps. Currently HR module is not applied to client 800. Two years later, HR will be applied.

    Hi,
    It is possible with userexit NUM_NR_ORDER
    ask abaper to add the fields like company code
    thanks,
    Rahul

  • Sales employee number range

    Dear experts,
    Under the same client in SAP system, can different company codes have different sales employee number ranges? If yes, should I just activate the number range? You know, there's no number range assignement to company codes.
    Plz help. Many thanks.
    Example:
    log on SAP - client 800
    client 800 has 2 company codes: 1001, 1002
    Request:
    sales employee under company code 1001: 10xxxxx
    sales employee under company code 1002: 20xxxxx
    ps. Currently HR module is not applied to client 800. Two years later, HR will be applied.
    Edited by: Cathy on Sep 2, 2010 2:46 AM

    There shouldn´t been any troubles with different number range. You have to be sure that you have the different number range create in PA04 and that in feature NUMKR you asign a diferent number range to each employee subgroup. For example, if you have number range "01" for sales employees and number range "02" for the rest of employees, your feauture must be something like this:
    Numkr
       Employee Subgroup
            SE (sales employee)
              01
            else
              02
    After you activate the feature it should work ok, if everything is done correctly in PA04 and in the feature.
    If it´s not working I am not sure what could be happening.
    Hope I can help you.
    Regards,
    Edoardo

  • For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    Hi Bharathi,
    If required no ranges are not there which you want to add then will not be problem and you can extend the 23999999 to your next limit like 39999999 check the overlapping.
    Check extended no rage are present in the system and then system would not except because of overlapping.
    Check and tell.
    Regards,
    Sankarsan

  • Employee Number Range.

    Hi ,
    I am trying to hire an employee which has a Employee Number which is of 7 digits.
    The system only allows employee numbers of 6 digit range.
    What do i need to change or add so that a 7 digit number can be hired?
    Regards,
    Rohit

    hi Rohit.
    check this in the T-code PA04 and maintain the number range as required.
                                                                                    <b>Intervals                                                                               
    No.From number         To number           Current number       Ext                 
       01 00000001            90000000                                                     
       02 90000001            99999999            0                                                                               
    </b>        
    reward if helps                                                                               
    Thanks,
    vasu.

  • Invoice verification number ranges

    Hi
    After processing a payment in MIR7, document number 5100519088 was assigned. When user processed the next payment 51000519063 was assigned. Can some one explain how these document numbers are being allocated, Normally the documents numbers are allocated in a sequential order..
    Checked in ILV number ranges, for all document types it is taking only one number ranges i.e 51.
    For creation and reversal invoice document it also taking same number ranges i.e 51
    Please help me to understand why it is not taking number ranges sequence wise ( only for 6 invoice documents)
    Thanks
    Andappa

    Hi,
    there can be various reasons for the gaps in invoice numbering.
    Please review the following notes in relation to gaps in numbers used:
    62077   Info: Internal number assignment is not continuous
    193020  Invoice verification: Gaps in number assignment
    175047  Causes for FI document number gaps (RF_BELEG)
    Main reason for numbering gaps is buffering. This is also described
    in attached note 62077.
    Document numbers can get lost in invoice verification if after choosing
    the 'Post' function (F11 or Ctrl+S) the system generates an error
    message or a termination message. In this case instruct users to pay
    attention to whether the system generates terminations or error messages
    after choosing post (F11 or Ctrl S). Ask them to note the message ID and
    the numbers, preferably together with the time. It is worth discovering
    a procedure, peculiar to your company or system configuration, that
    causes the system to generate other error or termination messages after
    posting (that is after number assignment). This should not normally be
    the case. All this is explaind in note 193020.
    Best Regards,
    Arminda Jack

  • Maintain number range interval for master data upload for existing employee

    Hi  Experts,
    1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
    2) I have the senario where i have to upload master data for new employees.
    Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
    << Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
    Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

    >
    s c patil wrote:
    > 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an  Internal number range. & then default that Internal number range.
    >
    > Pls reply ASAP
    Yes Mr. Patil...
    For existing employees
    you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
    For new employees
    While configuration you can create another number range as internal  for new hiring. and use NUMKR feature as well.
    Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
    Best Regards,
    Anand Singh

  • Employee Download - HR* prefix in Number range

    Our requirment when we download employee from ECC the prefix of Number range should be HR* we defined same number range with prefix HR----- and mark as Ext. but while download it takes only sales prospect number range.
    What extra setting requir for getting HR* prefix number range.
    Regards
    Apoorva

    Hi Phani,
    Thaks for reply,
    From config side the numberrange and groupings are assigned and while download the std external grouping also assigned but how it takes prefix HR*
    because from ECC it is carring only numerical numbers which is assigned to employee but while downloading it should take prefix HR* and rest would be employee number which is coming from ECC.we have defined the HR0000001 to HR9999999 as external but through idoc carring eg. 10036 so in CRM it should be as HR0010036. For getting this what extra config i have to do.or it requir some abap devlopment.

  • Alphanumeric number range for employees

    Dear Experts,
    I have a question, can any one clearify it?
    Can we maintain number range intervals for employee s with an alpha numerical value?  if yes, how?
    Thanks in advance
    Namrata

    no we cannot
    we will have problems in maintaing there personal data
    and if i always not recommended
    sikindar
    Re: Alpha numeric personal numbers
    Edited by: Sikindar on Dec 27, 2007 9:48 PM

  • Reason behind error msg for number range when hiring through PA40

    Hello Gurus,
    I am getting the following error message when hiring thru PA40.
    "No valid interval found(internal number assignment)"
    Internal number range is already defined and the system is picking up the number from the defind range. When we press "return" button, the system accepts the input asks the user to save the data. The whole action is runnig fine except the error message.
    Can you please explain why such error is comming?
    Thanks in advance.
    Best regards,
    Soumyajit

    Hi Soumyajit,
    Have you used NUMKR feature... if not assign to your PA and for your country. Try this and let us know.
    ward if it is helpfull.
    Regards,
    Raghu

  • External number range for Employees as vendor

    Dear SAP gurus,
    The requirement is to have same vendor code as that of personnel number for all employees in FI. I ran PRAA but it is running only when reference vendor belongs to account group which has got internal no range assignment, Is it possible to have vendor code in FI same as that of employee personeel no. in HR.
    Please adv.
    Thanks a ton!

    Hi,
    Yes, you can have in FI.
    1. Create an accounting group- Employee Vendors.
    2. Assign number range to account group however you want. Make sure account number assignment should be external.
    3. When you create vendor FK01 system prompts external number, so here you can enter the Employee personnel number and crete vendor.
    Rgds
    Murali. N

  • Error Number range 10 is internal, do not enter a personnel number

    Hi guys, When I try to hiring new emp this message appear Number range 10 is internal, do not enter a personnel number. Why this message appear. I still want to use this emp number. TQ

    Hi,
    While hiring an employee if you want the personnel number to be given by you then go to PA04 maintain number range and mark as external.
    Go to NUMKR feature and assign your Interval No: to your employee sub group & save it.
    Then go to PA40 and enter the Number and maintain the rest of the Info types
    Regards,
    Abhee..

  • Number range 01 is internal, do not enter a personnel number

    Hi,
    Im using PA40, and when I propose a personal number, the transaction sends this message "Number range 01 is internal, do not enter a personnel number"...  BUT I NEED to propose a personal number for my employees!!!... is it possible???!!!...
    Can anybody help me?...
    Thanks in advance!.
    Alfredo.

    hi alfredo
    see "Number range 01 is internal, do not enter a personnel number"... " if the message comes like this that means that particular number range is set for the internal number range i think so you are giving the personnel number if you remove that personnel number in IT0000 then save this case if you want to take the personnel number internal. if you want to take your personnel number then go to pa04 and assign personnel number range make it as external in the last column you can see there check box just click on that check box. and assign this same personnel number range (for ex you have given in pa04 07-00000000-10000000) the 07 in my example you have to assign in the numkr feature in TCODE PE03. in that assign countrygrouping-company code-personnel area-personnel subarea-ee group-eesubgroup- number range 07. i hope it is clear
    bye
    naveen

  • Internal Number range:Issue

    Hi,
    I am using the internal number range for the employee number creation.
    Scenario:
    Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
    Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
    I am able to delete the record (all the associated infotypes) successfully.
    Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
    I want the new correct employee to have the employee number as 00000013.
    Can you please advise?
    Regards
    Manish

    Go to Tcode PA04
    Click the Status  Delete 0000014  Current Number make it as 000013  and hire

  • Sap/hr/ number  range

    FOR HIRING PERMANENAT EMPLOYEES I WANT TO USE 1 RANGE . IT IS UNCHECKED .
    EG.
    I WANT TO MAKE NEW HIRING there are already 5 intervals for different category in transaction pa04 . In this case for hiring (pa40) per. no should start from 0000003352
    NO   FROM NO. TO  no.          current no.
    01     00000001    09999999        3352
    02     30000001    34999999
    03     35000001    39999999      35000044
    04     50000001    59999999
    05     70000001    79999999       70000027
    02 and 04 are checked under EXT.
    its showing error 'could not find server for number range 06' .
    i dont want to create series 06 as i want to start hiring (pa40) from 0000003352 (01 series)   AS WE HAVE pemanent EMPLOYEE no. starting from 00000001 09999999 series . can u help in this   plz tell me procedure. urgent .

    Hi,
    Check the feature NUMKR, you have defaulted the range 06 for your grouping and also the number you maintained should be continuous, otherwise, the system will throw you error message.
    Good Luck
    Om
    Reward it, if u feel helpful.

Maybe you are looking for