PA40 - using BDC

Hi All,
I'm having a problem creating a BDC interface for PA40. When selecting the personnel actions, I need to use the page down button which is ok code '=P+'. For some reason this doesn't seem to work. Any ideas why? Is there some way around this by using another option?
Thanks.
Regards,
Manu.

Hi Rich,
Tried working with the cursor without much luck. I have seen a previous post where it looked like someone had mentioned using counters for the page down. Is there an easier way to do this?
Thanks.
Manodh.

Similar Messages

Data upload for vendor balances using BDC

hi abap experts,
I have a requirement on data uploading using BDC.
For the vendor balances ie. for transaction FBL1N ( I was given a template for vendor balance upload and need to write a BDC program for that ) I need upload the exsisting transaction data to the system. is recording necessary for this?
can u pls help me with step by step process for vendor balance uploading.
Thanks,
Hema.

Hi
Please follow the following Steps:
Steps for recording:
Step1: Goto TCODE SHDB
Step2: Click on New Recording
Step3: Give the necessary Details such as TOCDE, Desc, ...
Step4: Do the screen by screen recording.(Please avoid extra screen to appear)
Step5: Save the recording.
Step6. Select the recording and click on Program button on toolbar.
Step7: Give the Program name and click on radio button Transfer from recording.
Step 8: It will open a new session with SE38 and a program with the recoding.
Step 9: then just add the basic code for BDC.
Regards,
Lokesh

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
                                            LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA                             *
Object Id     :                                        *
Develper Name : praveen                                *
Start Date    : 25.06.07                               *
Description   : uploading flat file to sap system      *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
        VKORG LIKE RF02D-VKORG,
        VTWEG LIKE RF02D-VTWEG,
        SPART LIKE RF02D-SPART,
        KTOKD LIKE RF02D-KTOKD,
        NAME1 LIKE KNA1-NAME1,
        SORTL LIKE KNA1-SORTL,
        ORT01 LIKE KNA1-ORT01,
        PSTLZ     LIKE KNA1-PSTLZ,
        LAND1 LIKE KNA1-LAND1,
        SPRAS LIKE KNA1-SPRAS,
        END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA:   ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA:    ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   COUNT TYPE I VALUE 1,
        S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
                 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = FILENAME
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0107'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-VKORG'
                                  IT_STR-VKORG.
    PERFORM BDC_FIELD       USING 'RF02D-VTWEG'
                                   IT_STR-VTWEG.
    PERFORM BDC_FIELD       USING 'RF02D-SPART'
                                  IT_STR-SPART.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                    IT_STR-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                IT_STR-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                    IT_STR-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                    IT_STR-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  IT_STR-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  IT_STR-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                    IT_STR-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-TXJCD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0310'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVV-BEGRU'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0324'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVP-PARVW(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*--Calling the transaction 'Vd01'.
    CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
    MESSAGES INTO MESSTAB.
    PERFORM MESSAGES.
    REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
    WRITE: /'SUCCESSFUL RECORDS'.
    format color off.
    LOOP AT ITAB1 INTO IT_STR.
      WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
              IT_STR-SPART,IT_STR-KTOKD,
              IT_STR-NAME1,IT_STR-SORTL,
              IT_STR-ORT01,
              IT_STR-PSTLZ,
              IT_STR-LAND1,
              IT_STR-SPRAS.
      S = S + 1.
    ENDLOOP.
REFRESH : ITAB1.
    WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
    WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
    LOOP AT ITAB2.
      WRITE:/ ITAB2-VKORG,
              ITAB2-VTWEG,
              ITAB2-SPART,ITAB2-KTOKD,
              ITAB2-NAME1,ITAB2-SORTL,
              ITAB2-ORT01,
              ITAB2-PSTLZ,
              ITAB2-LAND1,
              ITAB2-SPRAS.
        E = E + 1.
    ENDLOOP.
REFRESH : ITAB2.
    WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'I'.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
MESSTAB-MSGTYP = 'S'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
    MESSTAB-MSGTYP = 'E'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ENDIF.
ENDLOOP.
ENDFORM.                    " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

How many numbers of records can be uploaded using BDC at a time

dear friends,
i want to know that how many numbers of records can be uploaded using BDC at a time from legacy system(database).

no resticsation.
large value of data upload.

Capturing EPC error List into a local file using BDC

Can anyone let me know the Code for downloading the EPC check Results into a local File using BDC...[<b></b>

You can use the function module
EXTENDED_PROGRAM_CHECK to get the errors and warnigs of a epc for a program.
then you can download that internal table information using GUI_DOWNLOAD fm.
Regards,
Ravi

Error while posting business area to TCODE J1IH using BDC

Hi ,
Using BDC i am trying to post values to J1IH.
Here, the business area is not getting posted.
Can you help me ?
regards
ekadevi S

Thanks for your quick response, Michael!
I have another question on import. I imported a folder and it got imported with a warning (A folder named 'Folder Name' was created or modified during the import but is not in a business area
Import completed, but with warnings. Please check the result.
I can see the folder in the database table. Is there a way to add this folder to the business area? Or my only option is to delete the folder out of EUL?
Thanks once again!
AJ

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

Creation of po with mutiple line items using BDC

Hi Gurus,
      Can any body hav notes for creating po's using BDC with multiple line items in transaction ME21. I hav created po for single line item but if i tried to create multiple line items, it ll create multiple po's...
thanks in advance
arun

See the Below Logic for me22 and it is also same for me21
report zpochange.
data : i_error like bdcmsgcoll occurs 0 with header line.
data : i_bdcdata like bdcdata occurs 0 with header line.
tables : ekko, ekpo.
data :c1(10) value 'ME22',
      c2(1) value ',',c3(10).
data : var1(20). " LIKE EKKO-EBELN.
data : var2 like ekko-ebeln.
data : begin of i_ekko occurs 0,
          header(2),
          ebeln like ekko-ebeln,
          end of i_ekko.
data : begin of i_ekpo occurs 0,
item(2),
        ebeln like ekpo-ebeln,
        ebelp like ekpo-ebelp,
        menge(10), " LIKE EKPO-MENGE,
       end of i_ekpo.
data : v like ekpo-ebelp.
data: begin of itab occurs 0,
         text(300),
        end of itab.
parameters: p_file like ibipparms-path.
*PARAMETERS: PONUMBER LIKE EKPO-EBELN.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
    program_name        = syst-cprog
    dynpro_number       = syst-dynnr
   FIELD_NAME          = ' '
importing
    file_name           = p_file
start-of-selection.
*SELECT EBELN FROM EKKO INTO TABLE I_EKKO WHERE EBELN = PONUMBER.
      SELECT EBELN EBELP MENGE FROM EKPO INTO TABLE I_EKPO WHERE EBELN
*= PONUMBER.
perform get_data.
*LOOP AT ITAB.
WRITE :/ ITAB.
ENDLOOP.
loop at itab.
var1 = itab-text+0(1).
if var1 = 'H'.
*I_EKKO-EBELN = ITAB-TEXT.
split itab at c2 into i_ekko-header
                       i_ekko-ebeln.
SPLIT ITAB AT ',' INTO I_EKKO-EBELN.
                    " I_EKPO-EBELP
                    " I_EKPO-MENGE
                    " var1.
append i_ekko.
else.
split itab at c2 into i_ekpo-item
                        i_ekpo-ebeln
                        i_ekpo-ebelp
                        i_ekpo-menge.
append i_ekpo.
endif.
*var2 = i_ekpo-ebeln.
MOVE VAR1 TO I_EKPO-EBELN.
MOVE VAR1 TO I_EKKO-EBELN.
APPEND: I_EKPO.
*if not var1 is initial.
    split var1 at ',' into i_ekpo-ebelp
                           i_ekpo-menge.
i_ekpo-ebeln = var2.
append i_ekpo.
*endif.
endloop.
loop at i_ekpo.
write :/ i_ekpo.
endloop.
loop at i_ekko.
perform fill_data. " TABLES I_EKPO.
endloop.
LOOP AT I_EKPO.
WRITE :/ I_EKPO.
ENDLOOP.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
*LOOP AT I_ERROR.
WRITE :/ I_ERROR.
ENDLOOP.
form get_data.
call function 'WS_UPLOAD'
exporting
   codepage                      = ' '
   filename                      = p_file
   filetype                      = 'ASC'
   headlen                       = ' '
   line_exit                     = ' '
   trunclen                      = ' '
   user_form                     = ' '
   user_prog                     = ' '
   dat_d_format                  = ' '
IMPORTING
FILELENGTH                    =
tables
    data_tab                      = itab
exceptions
   conversion_error              = 1
   file_open_error               = 2
   file_read_error               = 3
   invalid_type                  = 4
   no_batch                      = 5
   unknown_error                 = 6
   invalid_table_width           = 7
   gui_refuse_filetransfer       = 8
   customer_error                = 9
   others                        = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform.                    " GET_DATA
*&      Form FILL_DATA
      text
     -->P_I_EKPO text
form fill_data. " tables   i_ekpo .
perform bdcscreen using 'SAPMM06E' '0105'.
perform bdcfield using 'RM06E-BSTNR' i_ekko-ebeln.
perform bdcfield using 'BDC_OKCODE' '/00'.
loop at i_ekpo where ebeln = i_ekko-ebeln.
V = I_EKPO-EBELP.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'RM06E-EBELP'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'BDC_OKCODE' '/00'.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'EKPO-MENGE(01)'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'EKPO-MENGE(01)' i_ekpo-menge.
perform bdcfield using 'BDC_OKCODE' '/00'.
*PERFORM BDCSCREEN USING 'SAPMM06E' 0120.
*PERFORM BDCFIELD USING 'BDC_CURSOR' 'RMO6E-EBELP'.
*CLEAR V.
endloop.
perform bdcfield using 'BDC_OKCODE' '=BU'.
call transaction c1 using i_bdcdata mode 'A'
                                   messages into i_error.
refresh i_bdcdata.
endform.                    " FILL_DATA
*&      Form BDCSCREEN
      text
     -->P_0140   text
     -->P_0120   text
form bdcscreen using    p_program p_screen.
i_bdcdata-program = p_program.
i_bdcdata-dynpro = p_screen.
i_bdcdata-dynbegin = 'X'.
append i_bdcdata.
clear i_bdcdata.
endform.                    " BDCSCREEN
*&      Form BDCFIELD
      text
     -->P_0145   text
     -->P_I_EKPO_EBELN text
form bdcfield using    fnam fval.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
append i_bdcdata.
clear i_bdcdata.
endform.                    " BDCFIELD
Reward Points if it is helpful
Thanks
Seshu

Creation of PO using BDC with ME21N - Urgent

Hi All,
My requirement is to create a Purchase Order using BDC. I'm using ME21N for BDC. I did recording and using that recording I wrote a program for BDC. BDC table is populated correctly, but while calling ME21N using call transaction, program is cuming back to the selection screen, without creating PO. And sy-subrc value after call transaction is '0'. Please let me know the problem.
Thanks in Advance.
Siva Sankar.

Hi,
Put a break point after the call transaction statement(i.e, put break point on sy-subrc check)
and then check the message table.
if call transaction is suceessfull u will find a success messages in the I_messages table.
Regards,
Sriram

Creation of Material using BDC Session method & global class

Hi
Creation of Material using BDC Session method & global class by using oops.
can anyone plz help me out

Hi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Creating Sales order texts while using BDC session method is not working

Hi All,
I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
I wanted to modify this BDC sesion to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
Please suggest if there is any way to create sales order using BDC.
Regards
Sheeba

Hi Madhu,
'=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
Part of BDC program generated for cretaing sales order texts.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
Regards,
Sheeba

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

PA40 - using BDC

Similar Messages

Maybe you are looking for