PAC Provisioning Fails Without End-User Accepting PAC Pop-up

We have lots of workstation on wheels. We use EAP-Fast with Cisco ACS for authentication. When a user isn't in front of the WOW and the PAC pop-up times out, it disables the WOW and causes problems.
Has anyone used some form of auto-accept method with the Intel PRO-Set so as to not require end-user acceptance of the PAC pop-up message?

The provisioning of the Machine PAC, which is needed for machine context connections, is accomplished using the server certificate or machine security identity (SID). Machine PACs are only supported in newer versions of authentication servers (ACS 4.0 or later) which have been upgraded to support EAP-FAST v1a.
To make a make a machine connection before the PAC has been provisioned, the CA certificate used to trust the server certificate must be placed in the proper Windows Certificate Store (Local Computer-Trusted Root Store).
The host must also provide these machine credentials:
â¢Active Directory provided machine certificate. The authentication method must support the use of a certificate to provide machine client credentials - the server must be appropriately configured to call for an inner tunnel method of TLS.
â¢Active Directory provided SID (password). The authentication method must support the use of a password to provide machine client credentials.
Finally, the FAST authentication server must be configured for auto creation of administrator's unique machine PAC information.
http://www.cisco.com/en/US/docs/security/cta/2.1.103.0_supplicant/admin_guide/ctaSuppl.html#wp1026518

Similar Messages

How can I hide the provisioning tab from end users?

Hi,
Can someone tell me if it's possible to hide the "provisioning tab" within FIM? End users do not need to see this.
I know how to modify RCDCs to hide individual fields, but I'm not sure about entire tabs.
Thanks in advance

http://social.technet.microsoft.com/Forums/en-US/74242380-c8ce-4904-863e-f28ae3605c7e/fim-r2-end-user-portal-customization?forum=ilm2

"Available" applications randomly installing themselves without end-user triggering

Hi, I'm running SCCM 2012 SP1 CU2.
I have a problem where a long list of "available" applications will install themselves on a workstation without any end-user action. I'm getting reports of this happening 2 or 3 times per week in an environment of 14,000 workstations (XP
and W7).
A couple minutes after a user logs on, between 30 and 70 applications get installed in quick succession. I can confirm that these apps do NOT have a "required" deployment type; they are all "available".
It is definitely SCCM doing it, as I can see all the .MSIs in \windows\ccmcache.
AppDiscovery.log (numerous similar messages):
ActionType - Install will use Content Id: Content_c758362d... + Content Version: 1 for AppDT "application 1 (*.msi file)"
ActionType - Install will use Content Id: Content_da9231a7... + Content Version: 1 for AppDT "application 2 (*.msi file)"
ActionType - Install will use Content Id: Content_e24e32b7... + Content Version: 1 for AppDT "application 3 (*.msi file)"
DCMAgent.log (numerous similar messages):
Job::SetupJob - Add assignment (DEP-XYZ20240-ScopeId_8FB9C6D8...
CDCMAgentJob::PopulateCIsFromAssignment - [SKIPPING] CI policy Id :ScopeId_8FB9C6D8...
All the applications that are getting installed are Applications (not packages), deployed as "available", that are set to install as the user, and are targeted to a large machine collection.
We have about 70 deployments like this, but I've seen variation where between 30 and 70 of these apps will get installed. Each incident will install a different subset of these 70 apps.
We've been cutting over our legacy packages to applications over time. The problem was first reported about a month ago.
Ideas?
Thanks,
Nick.

A couple minutes after a user logs on, between 30 and 70 applications get installed in quick succession. I can confirm that these apps do NOT have a "required" deployment type; they are all "available".
Any other triggers, you may get from event log? Also, all the machines/users have this problem or only subset of machines?
Anoop C Nair -
@anoopmannur :: MY Site:
www.AnoopCNair.com ::
FaceBook:
ConfigMgr(SCCM) Page ::
Linkedin:
Linkedin<

Answer FaceTime communication with End User Accepting the call

Hi,
Here is the case, I need the iPad (FaceTime or something else) that will permit me to call an elderly person and talk to this person without having the reciever (the elderly person) of the call do anything.
Calling this person and that the call is answered automatically.
I need this becaue this person has visual and memory problems. If she see's it she might
not remember she needs to press to accept the communication or even worst she
will not see the button she need to press to accept the incoming call.
Does anyone have an idea if this can be done on iPad ?
Eric

The provisioning of the Machine PAC, which is needed for machine context connections, is accomplished using the server certificate or machine security identity (SID). Machine PACs are only supported in newer versions of authentication servers (ACS 4.0 or later) which have been upgraded to support EAP-FAST v1a.
To make a make a machine connection before the PAC has been provisioned, the CA certificate used to trust the server certificate must be placed in the proper Windows Certificate Store (Local Computer-Trusted Root Store).
The host must also provide these machine credentials:
â¢Active Directory provided machine certificate. The authentication method must support the use of a certificate to provide machine client credentials - the server must be appropriately configured to call for an inner tunnel method of TLS.
â¢Active Directory provided SID (password). The authentication method must support the use of a password to provide machine client credentials.
Finally, the FAST authentication server must be configured for auto creation of administrator's unique machine PAC information.
http://www.cisco.com/en/US/docs/security/cta/2.1.103.0_supplicant/admin_guide/ctaSuppl.html#wp1026518

ISE - EAP-FAST PAC Provisioning - Identity field??

Hi all, very simple question regarding the fields in the PAC provisioning section of ISE. Basically wondering what the "identity" field under machine and tunnel PAC is meant to be? I am currently planning an EAP-FAST deployment and this is the only area I am wondering about. Essentially planning to auto-provision the PAC hopefully using authenticate in-band. The Cisco doco is a little vague on this particular field.
Thanks in advance - have googled this for a day or so and frankly cannot find the information that I want.

Use
PAC
•Tunnel PAC Time To Live—The Time to Live (TTL) value restricts the lifetime of the PAC. Specify the lifetime value and units. The default is 90 days. The range is between 1 and 1825 days.
•Proactive PAC Update When: of PAC TTL is Left—The Update value ensures that the client has a valid PAC. Cisco ISE initiates an update after the first successful authentication but before the expiration time that is set by the TTL. The update value is a percentage of the remaining time in the TTL. The default is 90%.
•Allow Anonymous In-band PAC Provisioning—Check this check box for Cisco ISE to establish a secure anonymous TLS handshake with the client and provision it with a PAC by using phase zero of EAP-FAST with EAP-MSCHAPv2. To enable anonymous PAC provisioning, you must choose both of the inner methods, EAP-MSCHAPv2 and EAP-GTC.
•Allow Authenticated In-band PAC Provisioning—Cisco ISE uses SSL server-side authentication to provision the client with a PAC during phase zero of EAP-FAST. This option is more secure than anonymous provisioning but requires that a server certificate and a trusted root CA be installed on Cisco ISE.
When you check this option, you can configure Cisco ISE to return an Access-Accept message to the client after successful authenticated PAC provisioning.
–Server Returns Access Accept After Authenticated Provisioning—Check this check box if you want Cisco ISE to return an access-accept package after authenticated PAC provisioning.
•Allow Machine Authentication—Check this check box for Cisco ISE to provision an end-user client with a machine PAC and perform machine authentication (for end-user clients who do not have the machine credentials). The machine PAC can be provisioned to the client by request (in-band) or by the administrator (out-of-band). When Cisco ISE receives a valid machine PAC from the end-user client, the machine identity details are extracted from the PAC and verified in the Cisco ISE external identity source. Cisco ISE only supports Active Directory as an external identity source for machine authentication. After these details are correctly verified, no further authentication is performed.
When you check this option, you can enter a value for the amount of time that a machine PAC is acceptable for use. When Cisco ISE receives an expired machine PAC, it automatically reprovisions the end-user client with a new machine PAC (without waiting for a new machine PAC request from the end-user client).
•Enable Stateless Session Resume—Check this check box for Cisco ISE to provision authorization PACs for EAP-FAST clients and always perform phase two of EAP-FAST (default = enabled).
Uncheck this check box in the following cases:
–If you do not want Cisco ISE to provision authorization PACs for EAP-FAST clients
–To always perform phase two of EAP-FAST
When you check this option, you can enter the authorization period of the user authorization PAC. After this period, the PAC expires. When Cisco ISE receives an expired authorization PAC, it performs phase two EAP-FAST authentication.
•Preferred EAP Protocol—Check this check box to choose your preferred EAP protocols from any of the following options: EAP-FAST, PEAP, LEAP, EAP-TLS, and EAP-MD5. By default, LEAP is the preferred protocol to use if you do not enable this field.

End user permission ignored

Hello,
I have a problem with an end user permission that seems to get ignored: I wanted to demonstrate the usage of the end user permission and assigned a role to a User (for simplicity's sake as an entry point, no worksets, pages etc. involved) and enabled end user permission on the role for that particular user.
Now when that user logs in he gets to see the according entry in the navigation bar as expected. However if I disable the end user permission, log out and again log in the user, he stills sees the link. The end user permission setting is simply ignored. Can someone shed light onto this, could there be something wrong with the installation)?
I don't think this is an issue of permission inheritance (the role permissions are set explicitly anyway) or overlapping permissions due to membership in several groups - the user is only member of the single standard group 'authenticated users'.
Regards,
Sebastian
P.S. What's the use of a role assignment to a user without end user permission anyway (I mean why the option)? What happens if you don't add permissions on a Role for a certain user at all (I tried it, but the effect is the same as described above - end user permission seem to be irrelevant)?

Hi Robert,
thanks for your answer and for the link (and I thought I had read everything). I am not so sure however if I really understand the term 'runtime environment' for a user. I thought runtime vs. design-time meant the difference between the content a user sees when he is actually using the portal and the content an administrator has access to in the portal content catalog, i.e. a meta-environment accessible only through certain tools like the permission editor or similar.
I don't understand what you want to express with "<i>It's used to restrict ... end user runtime environment</i>" and why the "Page Personalization" is an example.
I realize that for roles the availability for a user is solely defined by the assignment of that role to the user - end user permissions have no effect on this. Confusing, because I tought this availability (i.e. showing links in the toplevel or detailed navigation) was what was meant by 'runtime environment' but I seem to be wrong here.
The docu says "<i>for roles the end user permission setting does enable you to define which users/groups/roles are able to preview the role content using the portal design-time tools</i>". Again, I am confused, I thought this was exactly the meaning of design-time environment.
Great if you or someone else could comment on this..
Regards,
Sebastian

Photoshop Elements 8 not opening after agreeing to end user license agreement?

So like the title suggests, when I try to open Photoshop Elements 8, an End User License Agreement pops up for me. This happened just recently and in the years I've used the software it has never, ever done this to me, so I was kind of surprised when it popped up. I click accept to proceed, but after I click accept, it doesn't do anything at all. No matter how many times I try opening it, no matter how many times I try to only open the editor first and not the organizer or run as administrator, nothing seems to work. I really don't understand why this is happening and what I should do. I know reinstalling is an option, but I no longer have the installation disc so I would like to try other methods of fixing this if possible.
Enclosing a picture below so you can see what I'm dealing with:

Try the licensing service update:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

Error: I cannot view any PDF files without launching Reader and accepting end User agreement. I have already downloaded Reader.

I am getting an error message when I go to open a PDF file on my MAC that says "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the end user agreement. I have already downloaded Reader many times and followed all of the troubleshooting options. I have matched up my software, which is the latest version and checked to make sure my internet security is enabling java script. I don't know what to do. Please help.

Chrome uses it's own pdf viewer. That's why you don't get the message.
If you are still having the problem on a Mac try:
Make sure your files are not hidden : http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/
Quit Safari and Adobe Reader if running.
Go to HD/<Users>/<user name>/Library/Preferences/ delete com.adobe.Reader.plist
Launch Adobe Reader from /Applications/
You should be prompted to accept EULA.
If on a Windows machine, do what Bernd described above. Launch Adobe Reader on it's own, not by double clicking a pdf or a link in a browser.

EAP-FAST, local Authentication and PAC provisioning

Hi everybody,
I have a litte understanding problem with the deployment of EAP-FAST.
So here's the deal:
I want to the deploy EAP-FAST with autonomous APs with an ACS as Authentication server. So far so good.
When the ACS is not reachable, the autonomous AP should act as local Authenticator for the clients as backup. Is this possible when doing manual PAC provisioning? I guess not, because the PAC master key is not synced between ACS and the AP local Authenticator.
Would automatic PAC provisioning resolve that issue? If the ACS server fails, the local Authenticator AP will create new PACs for the clients, right?
But - I have doubts regarding automatic provisioning of PACs. From my understanding the Phase-0 is just performed in MS-CHAPv2, which is dictionary attackable. Furthermore a MITM attack could be possible during phase-0.
Would server sided certificates resolve my concerns here?
I would prefer PEAP, but the autonomous APs don't support this EAP type as local authenticator method, right?
Btw. .... is there any good document regarding FAST on CCO? I couldn't find anything. The Q&A page is just scratching the surface. The best document I could find so far is the ACS user configuration page. But I'm not 100% happy with this. Is there some kind of EAP-FAST deployment guide out there? I need best practices regarding PAC provisioning and so on :-)
Thanks in advance!

From what I understand a Internet proxy PAC and a eap-fast PAC are two different purposes.
Is that what you are trying to get clarification on.
Basically eap fast PAC provisioning is a PAC that s provisioned when a client authenticates successfully. The client provides this PAC for network authentication and not proxy authentication.
Sent from Cisco Technical Support iPad App

I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser." What do I do?

I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Acrobat Pro XI problem+Accept End User License Agreement when opening a PDF inside IE

Hi folks, this issue has been challenging.
Acrobat Pro CC install
W7 X64
Deployment went ok after the code was worked out, but.....
We use Desire to Learn content management system at the community college where I maintain the student computers at. When running D2L and a PDF has been embedded in some course material, I am getting the message below and the PDF won't open.
“Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement" .
The only fix so far is to run up Acrobat Pro and run the program once. Fine and dandy, but we are looking at 700+ machines to clear in this fashion. The other part of this scenario we we also utilize Respondus Lockdown Browser to invigilate exams through D2L. Because of the "lock down" features, the student can't even get back to the desktop to run Acrobat and clear the message.
I have tried a number of GPO entries to no avail. As well, disabled the IE PDF viewer add-on. I ran Procmon with no results either; .
I have been scouring the Googlemachine and building on the GPO below to get around the issue with no results. I am hoping someone with a sharper eye than I can spot something or point me in the correct direction..
Thanks eh.
GPLabs-Acrobat Reader default .PDF file open
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the central store.
Adobe Acrobat XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Acrobat                                      Disabled
Adobe Reader XI/Preferences/General
Policy         Setting       Comment
Show messages when I launch Reader                                      Disabled
Adobe Reader XI/Preferences/Startup
Policy         Setting       Comment
Enable Protected Mode at startup                                                Disabled
Preferences
Windows Settings
Registry
ELUA=1 (Order: 1)
General
Action        Update
Properties
Hive HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path    Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name        ELUA=1
Value type           REG_DWORD
Value data           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                No
Remove this item when it is no longer applied                                                         No
Apply once and do not reapply                                                                        No
EULAAcceptedForBrowser (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\11.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                           No
Remove this item when it is no longer applied                                                                 No
Apply once and do not reapply                                                                                             No
ELUA=1 (Order: 3)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                        ELUA=1
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                          No
Remove this item when it is no longer applied                                                                   No
Apply once and do not reapply                                                                                  No
EULAAcceptedForBrowser (Order: 4)
General
Action                                                                  Update
Properties
Hive                                                                     HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                              Software\Adobe\Adobe Acrobat\10.0\AdobeViewer
Value name                                                        EULAAcceptedForBrowser
Value type                                                           REG_DWORD
Value data                                                           0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 5)
General
Action                                                                           Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 6)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Acrobat\11.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
bBrowserIntegration (Order: 7)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER (HKU\.DEFAULT)
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\Originals
Value name                                                                  bBrowserIntegration
Value type                                                                    REG_SZ
Value data                                                                    00000000
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
User Configuration (Enabled)
Preferences
Windows Settings
Registry
ELUA (Order: 1)
General
Action                                                        Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\11.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                    REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
ELUA (Order: 2)
General
Action                                                                  Update
Properties
Hive                                                                               HKEY_CURRENT_USER
Key path                                                                       Software\Adobe\Acrobat Reader\10.0\AdobeViewer
Value name                                                                  ELUA
Value type                                                                     REG_DWORD
Value data                                                                    0x1 (1)
Common
Options
Stop processing items on this extension if an error occurs on this item                                             No
Run in logged-on user's security context (user policy option)                                                   No
Remove this item when it is no longer applied                                                                                       No
Apply once and do not reapply                                                                                                      No
.pdf (Order: 3)
General
Action                                              Update
Properties
Hive                                                  HKEY_CURRENT_USER
Key path                                           software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.pdf
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
OpenWithList] (Order: 4)
General
Action                                                                                     Update
Properties
Hive                     HKEY_CURRENT_USER
Key path              Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.PDF\OpenWithList]
Value name        (Default)
Value type           REG_SZ
Value data           "AcroRd32.exe"
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          No
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Control Panel Settings
Folder Options
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe)
pdf (Order: 1)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No
Open With (Extension: pdf, Program: C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe)
pdf (Order: 2)
General
Action                                              Update
Properties
File Extension                                 pdf
Associated Program                      C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.exe
Set as default                                  Enabled
Common
Options
Stop processing items on this extension if an error occurs on this item                                   No
Run in logged-on user's security context (user policy option)                                          Yes
Remove this item when it is no longer applied                                                                            No
Apply once and do not reapply                                                                                             No

Hi technobyte,
Try using APTEE to do EULA suppression and check.
You might want to refer the docs:
Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition
4   Installation Workflows — Enterprise Administration Guide
Regards,
Rave

How do I accept end user license agreement in adobe reader?

I have just updated the Operation System on my iMac from OS 10.6.8 to OS 10.9.4. Safari was updated to 7.0.5. When I attempt to open a pdf in Safari, I get a notice that:
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I have not been able to find any way to accept the End User License Agreement. How can I do this.
I can open pdfs in Chrome without any problems.
Thank you,
Don Monroe

Hi,
Go to 'Spotlight' at the top right corner of the Mac > Type Reader> Launch the 'Adobe Reader' application and then click on 'Accept' on the End User License Agreement.
Regards,
Rave

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

Cisco ISE with EAP-FAST and PAC provisioning

Hi,
I have search with no result on this topic. So, Does anyone have implemented Cisco ISE authentication with EAP-FAST and PAC provisioning ?
Since I have an issue with internal proxy, user required to authenticate with an internal proxy before granting access to the internet.
If you have any documents, it would be appreciated for me.
Thanks,
Pongsatorn

From what I understand a Internet proxy PAC and a eap-fast PAC are two different purposes.
Is that what you are trying to get clarification on.
Basically eap fast PAC provisioning is a PAC that s provisioned when a client authenticates successfully. The client provides this PAC for network authentication and not proxy authentication.
Sent from Cisco Technical Support iPad App

DPM 2012 Failed to update permissions used in end-user recovery

Hello everyone,
I'm going to try the clearest way possible to describe the problem.
Our test server is Windows Server 2012 with DPM 2012 SP1 CU2 (BKP-SRV01) with a Remote SQL server 2012 (PBASC)
I protected a share folder on a DC on Windows Server 2008 R2 (PAD)
When I activate End-User Recovery I get a warning in the monitor tab that say this
Failed to update permissions used for end-user recovery on pad. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in pad_PartageTest on the protected computer BKP-SRV01. Recycle Bin, System Volume Information folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details:
the end user recovery is working, but i do not know if it affect other things. I also get that message when i try to browse on the DPM server when creating a protection group
When I go see the DPM Server / File and Storage Services / Shares on Server Manager i get "Failed to retrieve folder permission" in the properties of the Protected server share.
I tried to search for almost 2 days without finding anything about that particular issue.
Is there a way (clean way) to fix the issue?
Thanks in advance for the help!

Closing for housekeeping.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
That's not very helpful. I've got the same issue :(
Comes up for servers where a protection group related to it errors out (recovery point failure usually).

PAC Provisioning Fails Without End-User Accepting PAC Pop-up

Similar Messages

Maybe you are looking for