Pacifist error when trying to extract quicktime from install disk

I get this error when i select the OSX install disk.
I deleted quicktime by mistake,so i needed to extract it again.
any info on what is causing this error?

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

Similar Messages

  • Error when trying to extract data from Solman to BI 7

    Hi,
    We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
    Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
    transaction: RSA5 (Installation of DataSource)
    0SM_SMG_ROOT Oberster Knoten Solution Manage
    0SM_SMG Solution Manager
    0SM_DSWPBI_DB390
    0SM_DSWPBI_DB400 DB400 Data
    0SM_DSWPBI_DBADA Adabas Data
    0SM_DSWPBI_DBDB2 DB2 Data
    0SM_DSWPBI_DBINF Informix Data
    0SM_DSWPBI_DBMSS SQL Server Data
    0SM_DSWPBI_DBORA Oracle Data
    0SM_DSWPBI_MODUL Module Data
    0SM_DSWPBI_PERF Performance Data
    0SM_DSWPBI_SERVER Server Data
    0SM_DSWPBI_SYSDATA System Details Data
    0SM_DSWPBI_SYSTEM System Data
    Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
    Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
    Please advice since this will be critical for our busines.

    Hello,
    I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
    Regards
    Andreas

  • WINRAR error when trying to extract NW2004s Sp11 (abap)

    Hello All,
    I received the following error when trying to extract NW2004s Sp11
    <b>!   E:SAPNW2004sABAPTrialSP11.part1.rar: CRC failed in SAPNW2004sABAPTrialSP11imageloadload_datasave.gz. The file is corrupt
    !   E:SAPNW2004sABAPTrialSP11.part2.rar: CRC failed in SAPNW2004sABAPTrialSP11imagesetup.jar. The file is corrupt
    !   E:SAPNW2004sABAPTrialSP11.part2.rar: CRC failed in SAPNW2004sABAPTrialSP11maxdbtoolsSQLSTD76.exe. The file is corrupt</b>
    I thought this was a download error and downloaded it again but the same error occured at the very same place.
    I get this error at exactly 99% extraction of
    Part 1(rar part no.71 - load_datasave.gz),  and in the begining of Part 2.
    It takes me about 2 days to download the parts and as you can imagine it can be really frustrating...
    I tried downloading using FlashGet(a downloader) as well as the normal save as... in IE, both ways I get the same error.
    Can someone please check to see if your RAR files(in the server) are corrupt?
    If not, can someone advice where else I can get this software?
    Thanks,
    Faheem

    Hello Faheem,
    You could compare the file sizes of your files with the sizes given on the
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399">download [original link is broken] [original link is broken]:
    <b>
    ABAP Edition File 1 (file size exactly: 1.536.000.000 bytes)
    ABAP Edition File 2 (file size exactly: 1.161.657.000 bytes)
    </b>
    Don't forget to put both parts in the same folder and extract just the first part. The second will be extracted automatically.
    Hope this helps.
    Kind regards,
    Klaus

  • Error when trying to load data from ODS to CUBE

    hi,
      Iam getting a short dump  when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

    Hi,
    Check this thread.........Ajeet Singh  has given a good solution here.........
    Re: Error With Data Load-Getting Canceled Right Away
    Also check SAP note: 382480..................for ur reference............
    Symptom
    A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
    Data type "TXW_INDEX" was found in a newer version than required.
    The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
    Additional key words
    RTXWCF01, LTXW2U01, TXW_INDEX
    Cause and prerequisites
    This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
    Solution
    If possible, avoid running DART extractions in parallel.
    If you do plan to run such jobs in parallel, please consider the following points:
    In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
    Run parallel DART jobs on different application servers.
    As an alternative, please apply note 400195.
    It may help u.........
    Regards,
    Debjani.......

  • Error when trying to extract WBS Hierarchy

    Any help appreciated.
    Using BI7, when trying to extract the WBS Hierarchy from an R3 source system using DataSource 0WBS_ELEMT_WBSH_HIER during the extraction process the load fails with error "The level of the node ID 00041234 does not suit the lev of higher lev node"
    The long text talks about Parent and Child nodes. I believe the numbers being stated, 00041234 etc refer to the Technical IDs shown within the Hierarchy Display within BI. I've checked table PRPS in Project Systems and I assumed the numbers represented WBS Elements - but they do not match when checking the descriptions. (BI to R3)
    Checked on OSS and note 339453 may apply but Im not sure what to check / how to replicate. Based on the errors being reported in BI how can I identify the error in the R3 source system?
    Many Thanks
    Lee

    Closed as no responses.

  • Propagation error when trying to download inventory from server

    Hi there,
    Has anyone seen the following error when trying to download an inventory from the server.:
    Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
    import:
    BUILD FAILED
    C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
    Additional Information:
    The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
    INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
    INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
    INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
    INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
    ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
    ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
    WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
    WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
    INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
    INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
    ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
    Total time: 14 seconds
    Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
    Please note changing the maintenace mode makes no difference.

    Please enable Verbose Logging on the propagation servlet
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
    and check the logs on the server, they might give a clue

  • 8008 Error when trying to download movies from iTunes

    I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
    Thanks,

    Morning pettis360,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Hope this helps,
    Mario

  • Run time error when trying to import bookmarks from firefox

    When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime  to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.

    In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
    * The first (gear) button is the Organize button with basic edit menu items for bookmarks
    * The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
    * The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
    Hover each button to see the tooltip or click each of them to see what they do.
    * https://support.mozilla.org/kb/how-do-i-use-bookmarks

  • Error when trying to export excel from Chrom

    Hi,
    I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution. 
    Thanks.
    Error message:
    To export a list, you must have a Microsoft SharePoint Foundation-compatible application

    Hi,
    From your description, when you export a SharePoint list to excel from chrome, you get an error.
    In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
    For your issue, make sure the excel client have been installed in your environment.
    To narrow down the issue, I would like to confirm the following information:
    To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
    What version is your office client? office 2013 or 2010? 32bit or 64 bit?
    Besides, here are some similar posts, you can take a look at:
    http://community.office365.com/en-us/f/172/t/160015.aspx
    https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
    I am looking forward to your reply back.
    Best regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error when trying to truncate table from within PL/SQL

    Hello.....
    Does anyone know why I get an error when trying to execute the following command from within PL/SQL?
    truncate table event;
    The error is as follows:
    ORA-06550: line 20, column 14:
    PLS-00103: Encountered the symbol "TABLE" when expecting one of the following:
    := . ( @ % ;
    The symbol ":= was inserted before "TABLE" to continue.

    And as a DDL, it does a COMMIT just before it runs. Whether you want a COMMIT or not.
    And with all the locking and serialization issues associated with a DDL.

  • Error when trying to migrate project from labwindows 2010 SP1 over to VS2008

    I'm sure I've been successful back with this when running CVI 8.5 and VS2003 / 2005, but I keep gettin the following error when trying to do this with my current configuration. What am I missing?
    See attached image
    Regards
    Gavin
    Attachments:
    CVI-VS error.JPG ‏29 KB

    Not recently, but what I would say is that CVI 2010 SP1 was installed after my VS2008 installation, so it ought to be in the right order.... When I get a moment I'll reinstall the CVI runtime and see what happens. Its not critical that I get this fixed, as the project in question is so small, and as the important parts are almost competely ANSI C, it should be really easy to reconstruct in C# anyway. I'll let you know what happens anyway

  • Errors when trying to extract via UD Connect (BI 7.0)

    Hi all,
    in a BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "DICTIONARY") into it and then hit the "Proposal" tab page, I get the following error:
    Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: DICTIONARY not found
    We had a restart of the system the weekend. Before that, I could easily select from the list of available UD Connect source objects (tables and views from the connected MS SQL Server) and the system showed correctly all fields of that object in the "Proposal" tab page.
    I think there is a problem with the JDBC Connector in the J2EE server. How can I check, if the connection between the JDBC Connector and the connected database is working? Unfortunately I have no access to the Visual Administrator for the J2EE engine because I am not from the basis team.
    Thanks to any answers in advance!
    Best regards,
    Philipp

    Hi again,
    I can precise the problems I have:
    I'd like to extract data from a table in a MS SQL Server 2000 database named DICTIONARY. This table has the following columns:
    DICTIONARYID (numeric(16,2), Not Null)
    LANGUAGECODE (char(2), Not Null)
    TYPE (varchar(24), Not Null)
    VALUE (numeric(38,0), Not Null)
    VALUENAME (varchar(48), Not Null)
    DESCRIPTION (varchar(128), Not Null)
    attr31 (numeric(16,2), Not Null)
    attr32 (numeric(16,2), Not Null)
    attr33 (numeric(16,2), Not Null)
    attr34 (numeric(16,2), Not Null)
    When starting the data extraction in the InfoPackage I get an error in the monitor. Deeper down in the J2EE server logs I get the following exception which is the reason for the error:
    Date : 11/21/2006
    Time : 8:53:48:452
    Message : Exception: Value '30.00' cannot be converted to NUM type at field ATTR31
    Severity : Error
    Category :
    Location : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
    Application : sap.com/com.sap.ip.bi.sdk.datasource.sync
    Thread : SAPEngine_Application_Thread[impl:3]_10
    Datasource : 238150750:/usr/sap/DOS/DVEBMGS23/j2ee/cluster/server0/BI_SDK_Trace.log
    Message ID : 0014C2658003005E000000C0000041F5000422BD226B24FF
    Source Name : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
    Argument Objs :
    Arguments :
    Dsr Component : DOS
    Dsr Transaction : 456273935D18288AE1000000C72A309C
    Dsr User : HINNAPHI                       
    Indent : 0
    Level : 0
    Message Code :
    Message Type : 0
    Relatives :
    Resource Bundlename :
    Session : 0
    Source : com.sap.ip.bi.sdk.datasource.beans.BI_SDK_Bean
    ThreadObject : SAPEngine_Application_Thread[impl:3]_10
    Transaction :
    User : J2EE_GUEST
    Actually there is a record that has 30.00 as value in the attr31 field. I think there are problems with the numeric(16,2) fields. I tried to use different data types in the corresponding fields of the UD Connect data source (e. g. DEC, FLTP) with different length and decimal places settings. But the exception is always the same (see above).
    Another issue: I can only specify "Internal" for the format in the data source maintenance. If I use "External" or "Check" the system says: "External format not supported as data type is not 'CURR'".
    Do you have any idea why this conversion exception occurs and what I could do about that?
    Thanks to any answers in advance!
    Regards,
    Philipp

  • SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

    I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
    This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
    column) is FALSE.
    The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
    remain blank like I want it to.
    Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
    JackSki123

    Hi Jack,
    Could you provide a screenshot about this issue?
    As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
    And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
    http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
    Thanks
    Daniel Yang
    TechNet Community Support

  • Keep getting import error when trying to import photos from my camera. "iphoto cannot import your photos because there was a problem downloading an image".  Can anybody help?

    Have a problem importing my photos to iphoto '11.  Keep getting an error message.  Tried deleting some photos from iphoto as well as my camera, but it didn't help.  Can anybody tell me why this is happening?

    what happens when you use Image Capture (in your applications folder) and see what happens
    LN

  • Oracle Planning gives error when trying to open application from Workspace.

    Hello,
    We have version 11.2.2.0.0 of Planning installed. After the install of Essbase Studio Server we have hit some issues where Planning does not seem to be available. Despite re-deploying several times and other things, we cannot connect to the Planning server.
    Planning does seem to be listening
    c:\Oracle\Middleware\user_projects\domains\EPMSystem\bin>netstat -na | findstr 8300
      TCP    127.0.0.1:8300         0.0.0.0:0              LISTENING
      TCP    155.209.11.122:8300    0.0.0.0:0              LISTENING
      TCP    [::1]:8300             [::]:0                 LISTENING
    but the test URL will not resolve
    http://hcb-mapp156:8300/HyperionPlanning
    Error 404--Not Found
    When trying to open a Planning application from Workspace we see the following errors:
    Description: Invalid or could not find module configuration 'HyperionPlanning.planning'.
    URI: http://localhost:19000/HyperionPlanning/conf/HspJSConfig.xml
    Status: 404 - Not Found
    Content: text/html; charset=UTF-8
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
    <HTML>
    <HEAD>
    <TITLE>Error 404--Not Found</TITLE>
    </HEAD>
    <BODY bgcolor="white">
    <FONT FACE=Helvetica><BR CLEAR=all>
    <TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
    <FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
    </FONT></TD></TR>
    </TABLE>
    <TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
    </FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
    </FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
    </FONT></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    Hope someone can help here.
    Thanks,
    Philip.

    Hello,
    Yes, I see this error in the logs:
    <Nov 12, 2013 11:09:17 AM CET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NullPointerException.
    java.lang.NullPointerException
    at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:241)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
    Truncated. see log file for complete stacktrace
    >
    <Nov 12, 2013 11:09:17 AM CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'PLANNING [Version=11.1.2.0]'.
    weblogic.application.ModuleException:
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:213)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:30)
    at com.hyperion.hit.tool.deploy.update.UniversalListener.contextInitialized(UniversalListener.java:80)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    Truncated. see log file for complete stacktrace
    Thanks.

Maybe you are looking for