Pack existing Handling Units into outbound delivery
Hi,
The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
Has anybody faced a similar issue.
Thanks
Martin
Hallo!
Yes, I have the same problem now.
In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
Nowadays this solution is not sufficient, because the old hu has serial numbers.
Any solution in sight?
bye
bernhard
Similar Messages
-
Packing handling units to outbound delivery with batch management
Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
IsaacDear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely -
How to unassign handling unit in outbound delivery?
(Don't Want to delete HU onlu unassign it from delivery: WM requirement)
I would like to unassign HU in an outbound delivery.
code i'm using make the handling unit disappear in the overview of HU.
but corresponding line in the "item overview" are still existing.
And when I want to copy pack quantities as delivery quantities, system tell me that "50.000 M have already been packed. Quantity cannot be changed. "
How can I do, to do as if i pushed button "delete assignment" in HU overview?
Here the code I'm using:
CALL FUNCTION 'HU_PACKING_REFRESH'.
CALL FUNCTION 'HU_GET_HUS'
EXPORTING
if_lock_hus = 'X'
it_venum = I_VENUM "it_venum contains l_venum
IMPORTING
ET_ITEM_SERIALNO = o_item_serialno .
CALL FUNCTION 'V51P_DELETE_RELATIONSHIP'
EXPORTING
IF_CONTROL = 'X'
IT_HUS = i_venum
IMPORTING
ET_NEW_HUS = LT_HUS
et_messages = lt_messages
EXCEPTIONS
FATAL_ERROR = 01 .
CALL FUNCTION 'HU_POST' .
call function 'BAPI_TRANSACTION_COMMIT'.
Please let me know the function module if anybody has idea to unassign from delivery.
Edited by: Akshay Kale on May 4, 2010 7:04 AMHi Akshay,
This question is marked as Answered , can you please let me know how you have resolved this error .
My Requirement is to remove HU assignment from inbound Delivery . If possible can u provide me the code snapshot to remove assignment for inbound delivery. -
Processing handling units for outbound delivery
Dear All,
I am getting the message "The material contained in the item you chose is maintained in the material master with the material group packaging material K. The handling unit you chose has a packaging material of the packaging material type V
There is no entry for the material-group packaging-material for this material type in Customizing.
Can you please advice what should be done to fix this where to make the customizing.
Warm RegardsHi,
Change the material group in the mateiral master. OR in SPRO configure for Define material group for packaging material and Define Allowed Packaging Materials for the material group that you have defined in the material master.
Thanks and Regards,
Maheshwari -
Inbound Delivery Shipping Unit and Outbound Delivery Shipping Unit Mismatch
Hi All,
At the time of creating the outbound delivery, I am getting the error"Inbound Delivery Shipping Unit and Outbound Delivery Shipping Unit Mismatch".
Please help me to resolve the above error.
Please let me know the cause for the above error.
Regards,Hai Shafi,
PLease check these threads,
http://help.sap.com/saphelp_40b/helpdata/pt/a4/613275e24bd111950d0060b03c6b76/content.htm
http://help.sap.com/saphelp_46b/helpdata/en/ac/f6fe78931a11d184d10000e81ddea0/content.htm
http://education.feedfury.com/content/18638791-processing-shipping-units-in-sap-sd.html
And hope you are using the same material received in inbound for outbound also.
If material is different please check UNIT in Material master for both materials.
Regards,
Mani -
BAPI or Function Module to create Handling Unit at the delivery level
Please send me the BAPI / FM details to create Handling Unit at the delivery level.
ThanksHi
you can try below BAPI's.
BAPI_HU_CREATE
BAPI_HU_PACK
Hope this helps you.
Rgds,
Kris. -
Handling unit weight into outbound delivery weight?
Hi,
I would like to transfer the total of my Handling unit weight to my outbound delivery weight. This is at this moment copied from the Sales order. How can I change that SAP will use the weights of the HU? Anybody?
Thank you,
Eric van Zundert.
Edited by: eric van zundert on Feb 25, 2008 2:49 PMDear Eric,
if you also want to add the weight of the packaging materials to the weight of the delivery, you will have to create a delivery item for the packaging materials. Please check note 831204 for the necessary settings.
I hope I could help you with this.
Regards,
Ely -
Weight from Handling Unit not copied into outbound delivery weight field.
Hi,
We create handling units with hupast and with a weight interface. If we select the HU in the outbound delivery, we need the total weight of all HU displayed in the outbound delivery. This is not happening. The total weight which is shown is the weight of the material master.
How can we put HU weight in the outbound delivery?
Thank you,
Eric van Zundert.hi Eric,
you habe to do this with a user exit.
In the deliveries, there is only one good userexit at the time save dcoument prepare. -- there is a oss - note for it.
I copy at every save the sum of the HU-weights in the fields of likp.
Additionally at time of goods out - boocking, i collect the LIKP-weight upon all positions of the lips, so that the sum of lips-weights will give the likp-weight.
You need to do this, because in invoice, the weight is taken as sum of the positions and the following processes of export will also take the weight of the invoice-position.
hans -
Handling units of Outbound deliveries
hi all.,
while creating outbound delivery , i will make the packing,so at the time the system gives all information expect<b> the Metrial</b>
What Can i do for this error?
pls help me
Regrads
Lakshmanan.S
E-Mail : [email protected]You may need to create packing instructions so that the correct packaging material is assigned within the delivery
Within packing instructions you need to create an instruction and then assign it
Logistics > Central Functions > Handling Unit Management > Master Data > Packaging Instructions > Create
Logistics > Central Functions > Handling Unit Management > Master Data > Packaging Instructions determinsation > Create -
Same Handling Unit in Return delivery
we have a scenario which we are implementing for SAP's client DHL.
The scenario is as follows:
1. We have done the GI for the handling units.
2. And we want to take the same handling units back.
In order to do so, what we do
1. We create a return order with original sales order
2. This eventually creates a return delivery but does not get the handling units assigned.
3. Hence the delivery needs to be packed with the same HU's with which the goods have been issued.
Anyone has faced the issue earlier or any one aware of any Bapi or functional modules which will allow them to pack with the same HU.
Thanks in advance
Ajay.It's seems that you faced it a few years ago, could you please post what you did?
Thanks -
Handling Unit Details for Delivery needed (Table VEKP in R/3)
Hello all,
do you know if there is any standard extractor for handling unit details of an R/3 delivery?
I searched the Business Content and the available Extractors in R/3 but cannot find any.
If there is none, what would be the best way to get some content of Table VEKP e.g. VEKP-VHILM? Define an own structure and create a view? Can I also do this with the delta functionality?
Many thanks for your answers upfront.
Peggyindeed my question "short description" is wrong, as one material can have only one base unit.
If the base unit of one material in my system is CRT (crate) and the description is "box with 30 table napkins packs", I need to know where store the description of the single "table napkins pack" or "pallete with 20 boxes of 30 table napkins packs" available under "Units of measure" of that material.
The full hierarchy (pack-Box_pallete) of the material units are available in one SAP material, but there is only one place for one description.
Thanks -
Sales Order Packing Proposal Handling Units Serial Numbers
Hi Guru
I am able to create SAP Sales Order Packing Proposal to pack the Line items and also Handling Units got created.
But I can not assign serial nos in to this handling Units .Serial No ICON Greyed out (Not Editable) in the Sales Order Handling Unit Screen.
Please help
Thanks
SRHi,
In my point view packing material should be used in the delivery document only.
Not in sales order.
Because in delivery document you can pack the material and get the handling unit number also.
So why you want it should be done at the sales order level only?
It's my point of view and it may be wrong also.
But I will prefer to use the packing material in delivery document only not in sales order.
Regards
Raj.
Edited by: Raj Aryan Malhotra on Jul 16, 2009 3:37 PM -
How to delete handling units for a delivery
While deleting delivery note there are hundreds of handling units.
please help me how to delete handling units
Thanks for the help
Rajendra PrasadHi
u can delete Handling Units in change view delivery document.. Click Packing it will show Handling Units..By there itself u can delete..
IN VL02N -
Function Module for UNPACKING Handling Unit from Inbound Delivery
Hello Experts,
I am working on a RFID program to Receive goods from vendor...
One of the steps of the program should CHANGE the quantity inside a received batch.
To do so, I need to UNPACK the Handling Unit first... then change the quantity.
I am using the following Function Modules to do so:
- 'HU_GET_HUS'
- 'V51P_FILL_GT'
- 'HU_PACKING_AND_UNPACKING'
- 'HU_POST'
First 2 FM works fine...
But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
Have anyone done this before??
Here's the code I've done to do some testing before putting it into my code...
PLEEEEEEEEEEEASE HELP.
TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
DATA: wa_object LIKE hum_object,
it_object TYPE TABLE OF hum_object.
DATA: wa_v51vp LIKE v51vp,
it_v51vp TYPE TABLE OF v51vp.
DATA: flag LIKE v51p_select_flags.
DATA: it_venum TYPE STANDARD TABLE OF hum_venum,
ef_rcode LIKE sy-subrc,
et_vekp TYPE STANDARD TABLE OF vsep_s_vekp,
et_vepo TYPE STANDARD TABLE OF vsep_s_vepo,
et_vevw TYPE vsep_t_vevw,
et_highest_level TYPE vsep_t_venum,
et_messages TYPE huitem_messages_t,
is_packing_request TYPE vsep_s_pithu,
es_p_request TYPE vsep_s_pithu,
es_item LIKE vepovb,
cs_header LIKE vekpvb,
ef_number TYPE vpobjkey,
et_header TYPE STANDARD TABLE OF vekpvb,
et_items TYPE STANDARD TABLE OF vepovb,
et_item_serialno TYPE vsep_t_rserob,
et_history TYPE hum_history_t,
et_highest_levels TYPE hum_venum_t.
DATA: wa_venum LIKE hum_venum,
wa_vepo TYPE vsep_s_vepo,
wa_vekp TYPE vsep_s_vekp,
wa_items TYPE vepovb,
wa_header TYPE vekpvb.
START-OF-SELECTION.
wa_venum-venum = p_venum.
APPEND wa_venum TO it_venum.
CALL FUNCTION 'HU_GET_HUS'
EXPORTING
it_venum = it_venum
IMPORTING
et_header = et_header
et_items = et_items
et_item_serialno = et_item_serialno
et_history = et_history
et_highest_levels = et_highest_levels
et_messages = et_messages
EXCEPTIONS
hus_locked = 1
no_hu_found = 2
fatal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_header INDEX 1 INTO wa_header.
CALL FUNCTION 'V51P_FILL_GT'
EXPORTING
it_venum = it_venum
IMPORTING
ef_rcode = ef_rcode
et_vekp = et_vekp
et_vepo = et_vepo
et_vevw = et_vevw
et_highest_level = et_highest_level
et_messages = et_messages
EXCEPTIONS
hu_locked = 1
no_hu_found = 2
fatal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_vepo INDEX 1 INTO wa_vepo.
READ TABLE et_vekp INDEX 1 INTO wa_vekp.
MOVE-CORRESPONDING wa_vepo TO is_packing_request.
is_packing_request-belnr = wa_vepo-vbeln.
is_packing_request-quantity = wa_vepo-vemng.
is_packing_request-veanz = '-1'.
is_packing_request-meins = wa_vepo-vemeh.
is_packing_request-exidv = wa_vekp-exidv.
CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
EXPORTING
is_packing_request = is_packing_request
IMPORTING
ef_rcode = ef_rcode
es_p_request = es_p_request
es_item = es_item
CHANGING
cs_header = cs_header
EXCEPTIONS
missing_data = 1
hu_not_changeable = 2
not_possible = 3
customizing = 4
weight = 5
volume = 6
serial_nr = 7
fatal_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HU_POST'
EXPORTING
if_synchron = 'X'
if_commit = 'X'
IMPORTING
ef_number = ef_number.
break nunfx004.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance,
FernandaHi ,
Check this code.
Pack componet HU to Overpack HU. *
l_packing_req-venum = g_ovrp_venum. "Overpack Internal HU
l_packing_req-exidv = g_ovrp_exidv. "Overpack External HU
l_packing_req-veanz = '1'. "PACK Constant
l_packing_req-sub_hu_venum = l_int_venum.
l_packing_req-sub_hu_exidv = l_int_exidv. "Componet External HU
l_packing_req-velin = '3'. "HU Type Constant
l_packing_req-quantity = '1.000'.
call function 'HU_PACKING_AND_UNPACKING'
exporting
is_packing_request = l_packing_req
exceptions
missing_data = 1
hu_not_changeable = 2
not_possible = 3
customizing = 4
weight = 5
volume = 6
serial_nr = 7
fatal_error = 8
others = 9.
if sy-subrc <> 0.
error
clear: v_msgv1, v_msgv2, v_msgv3.
v_msgv1 = text-031.
PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
leave to screen sy-dynnr.
endif.
No Errors --> POST HU
call function 'HU_POST'
exporting
if_synchron = 'X'
if_commit = 'X'.
plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
Regards
Mohinder Singh Chauhan -
PACKING AND HANDLING UNIT MANAGEMENT
HELLO GURUS,
Please help me out in handling a project consisting of Packing and HU. I want to know how it can be done in dairy products. Here in dairy, we will have two kinds of packing. One is milk into Plastic packet and the other one is packets into crates. If you give detailed customization part along with the sequence of the steps, it would be of great help. Your fast reply in this regard is highly appreciated.
Ravindra
SAP SD consultantTo define Packing you should follow the below mentioned SAP Menu path.
1. Define Number Ranges for Handling Units by going to IMG-->Logistics Execution >Shipping>Packing-->Define Number Ranges for Handling Units
2. Packing Control by Item Category
3. Define Packaging material Types
4. Define Material Group for Packaging Materials
5. Define Allowed Packaging Materials
6. Define Packing Instructions
Transaction code POP1
SAP Menu R/3 Easy Access>Logistics>Central Functions>Handling Unit Management>Master Data>Packing Instructions>Create
7. Define Packing Instructions Determination Records
Check with Material master data if the error comes. maintain material group pack matl.
regards
SB
Maybe you are looking for
-
Problem with data in Adobe Forms - partially displayed(first pade only)
Hi all . I only start work with Adobe Forms so I need your help . My form includes table with lot of data . My problems are: 1.only the first page with data is displayed and I don't see the rest of data . What I need to define for get all
-
Just installed Iphoto 6 and many photos will not import to Iphoto...
About half of my photos from one of my rolls from this Spring will not import into Iphoto6. I can open them up from my hard drive but they will not import into Iphoto. Any tips? g4 tower Mac OS X (10.3.9)
-
I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller tha
-
After installing OS x lion, I can't access iTunes store
Help!!! I just installed the OS XLion as that was the prerequisite for my using icloud. I was excited about this as I wanted to store all my itunes purchases there as I was running out of space on my mac. Unfortunately, I can't even access the itunes
-
Can I print two ore more PDF files together (parallel)?
Hello, I am receiving listings with a source code in PDF files. These source codes have errors and I must find and correct it. I need to print several source codes (PDF files) in one printer page /parallel/ for facilitation. Can somebody help me to d