Package DBDOM error ...

I am trying to run one of the sample programs. I am getting this error:
SQL> exec InsertDeptFromXML('<DEPT><DEPTNO>60</DEPTNO><DNAME>Sixty</DNAME></DEPT
');BEGIN InsertDeptFromXML('<DEPT><DEPTNO>60</DEPTNO><DNAME>Sixty</DNAME></DEPT>');
END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "SHRIKANT.DBDOM" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SHRIKANT.INSERTDEPTFROMXML", line 22
ORA-06512: at line 1
What could be wrong?
- Shri

Your DBDOM package did not compile correctly, and this demo procedure depends on the DBDOM package.
Suggest you try re-running the:
-> dbdom_schema.sql
-> dbdom.sql
from SQL*Plus then do a:
SQL> show errors
to see what compile errors occurred.
Could be that you're missing some
of the packages that DBDOM depends on.
You can run the ./install/checkdeps.sql
to test whether you are missing any
dependencies.

Similar Messages

  • Failed to load Execute Package Task error.

    Hello Experts,
    Excuse my newbie question.
    Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
    We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
    catalog. The package fails to execute with the above said error.
    Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
    ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
    Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
    Thanks.

    As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
    Server\110\DTS\Binn".
    Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
    Hi Jayakarthiks,
    To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
    media.
    Reference:
    http://msdn.microsoft.com/en-us/library/ms143731.aspx
    Regards,
    Mike Yin
    If you have any feedback on our support, please click here
    Mike Yin
    TechNet Community Support

  • Package-query: error while loading shared libraries: libcurl.so.4: can

    Hi all
    when i run yaourt to install any things :
    package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
    why?
    what can i do?
    I'm very newbie so help me with easy commands!
    thanks

    try to reinstall yahourt :
    https://wiki.archlinux.org/index.php/Yaourt

  • Package Validation Error - SSIS Error Code DTS_E_OLEDBERROR - Error code: 0x80040E4D

    I sometimes get the following error randomly - 
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at MY_PACKAGE_PLUS[Connection manager "MY_DATABASE"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E4D.
    An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80040E4D  Description: "Login failed for user 'USERNAMEZ'.".
    Error at MY_PACKAGE_PLUS [Log provider "SSIS log provider for SQL Server"]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "MY_DATABASE" failed with error
    code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
     (Microsoft.DataTransformationServices.VsIntegration)
    My package name in SSIS/BIDS is MY_PACKAGE, but in the error I see MY_PACKAGE_PLUS, which was the name of an older version of the package. This error goes away when I close SSIS and then restart it. I wonder why this happens and how do I fix it
    ? Is this some bug in SSIS ? The same package runs without errors in SQL server agent.
    Thanks.

    It seems the old package reference still exists in your project bin folder or inside stproj file. WHich is why it tries to validate the older package each time when you start  the project.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Package Authoring Error

    Hi
    I may have come to the wrong Forum and if so my apologies but if there is some one who could let me know if i need be concerned of the following errors i have just noticed in Console after having done recent Java And Safari update today.both installations i believe were completed successfully but console is showing the following message.
    13/03/2011 13:43:52 Software Update[133] Software Update Package Authoring Error: installation-check results requires a message
    13/03/2011 13:38:58 Software Update[136] Software Update Package Authoring Error: <choices-outline ui='SoftwareUpdate'> should only have one <line> element. Put additional <line> elements in a <choices-outline ui='invisible'> element.
    Thanks in advance
    Cole

    mach_kernel file missing in root of harddrive
    replaced, now working again

  • Currency Translation- Package Status error

    I am encountering the following error after running  the currency translation package.
    The following is the error message in the package log
    RUN LOGIC : Run program error,Message Number : ''''
    Failed
    Application:Sales Package Status :ERROR
    Can some one please tell me what does this error mean and how it can be resolved

    HI,
    This error has been discussed in many threads here in this forum.
    Refer these and see if u can get a solution:
    Re: Currency conversion issue.
    Re: Currency Conversion Problem
    Regards
    Navin

  • AIR 15.0 for OSX - ADT: Packaging failed. Packager internal error

    Packaging a SWF to AIR with captive runtime and native installer (using "-package bundle"), building on PC worked perfectly fine.  After making all of the requisite changes to make it work for Mac, I'm now running into the "Packaging failed. Packager internal error" when building using adt through the command line.  My .command script is as follows:
    cd [directory]
    adt -package -storetype pkcs12 -keystore ../cert/key.p12 -storepass pw -target bundle Bundle ../App.xml App.swf -extdir ../lib icons/16.png icons/32.png icons/128.png
    What can cause this vague "Packger interal error" error? Any help would be appreciated. Thank you.

    Steve
    I have same problem with apple Developer Id Application certificate (downloaded from apple), got past the chain error message by including intermediate and root certificates when I exported from keychain, but got the package error referenced here. Also when I sign on windows machine with my code signing certificate (selecting windows installer) all publishes ok, but the certificate is not attached, says 'unknown developer' when I down load and try and run installer on windows machine. I sent the exe to Comodo (the guys I got the code signing certificate from) and they say the exe is not signed.
    Finally I get 'The digital certificate is invalid'  error when I try and use 'Developer Id Installer' certificate (downloaded from apple).
    I think there must be several problems here with Air SDK.
    Stopping me from publishing and I have a very upset Customer. Can someone from Adobe please advise asap.

  • Security package specific error occurred when trying to connect to Orchestrator with remote Runbook Designer

    When I try to connect to Orchestrator server with Runbook Designer installed on my laptop I get an error saying "A security  package specific error occurred.".
    Entry from Designer log file is below. I've tried to set error level to 3 and 7 but got no additional info about the error. I'm unable to find any details of the error on server or client side in any logs (Event Log or Orchestrator trace logs).
    Connecting to Orchestrator Management Server with local Designer installed on the server works fine. 
    Orchestrator is installed in AD environment and security groups are properly configured.
    Can anybody help?
    2012-06-12 11:35:51 [7472] 1 Exception caught in long __cdecl `anonymous-namespace'::connectCommunicator(struct HWND__ *,const class std::basic_string<wchar_t,struct std::char_traits<wchar_t>,class std::allocator<wchar_t> > &)
    Connections.cpp(238):
    <Exception>
    <Type>Opalis::Exception</Type>
    <Location>
    void __thiscall ServiceCommunicator::connect(const class std::basic_string<wchar_t,struct std::char_traits<wchar_t>,class std::allocator<wchar_t> > &)
    ServiceCommunicator.cpp(118)
    </Location>
    <MsgCode>A security package specific error occurred.
    </MsgCode>
    </Exception>

    I'm having a similar issue with one of our runbook servers. i cannot deploy any IPs to it. I get the error "A security package specific error occurred". I can open the designer on the runbook server, connect to the management server, and look at
    runbooks. They wont run on the server without the IPs though, but it doesnt seem like a connection issue. i have also tried uninstalling/re-installing the runbook server and i get the same. 
    Has anybody else run into this? 
    Edit:
    Heres an error fromthe event log:
    The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server <Service Account>. The target name used was HOST/server.domain.domain.com. This indicates that the target server failed to decrypt the ticket provided by the client. This can
    occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also
    happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to
    use the current password. If the server name is not fully qualified, and the target domain (domain.domain.COM) is different from the client domain (domain.domain.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified
    name to identify the server.
    So maybe I was just given the wrong account.
    - Slow is smooth and smooth is fast.

  • Combined Update 10.8.3 installation failure JS: Package Authoring Error:

    Hi there,
    I'm trying to install the combined Update 10.8.3 from 10.8.2.
    It doesn't show in the Softwarupdate, so i downloaded it from support.apple.com
    Now i get a failure while Installing, or before installing.
    Konsole log:
    24.04.13 12:06:12,138 CoreServicesUIAgent[3438]: Error: qtn_file_apply_to_path error: Read-only file system
    24.04.13 12:06:12,375 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    24.04.13 12:06:14,355 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    24.04.13 12:06:14,664 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    24.04.13 12:06:14,664 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    24.04.13 12:06:14,684 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    24.04.13 12:06:14,684 Installer[3474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    24.04.13 12:06:14,687 Installer[3474]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    24.04.13 12:06:27,707 SystemUIServer[132]: -[TCMNATPMPPortMapper_Combined refreshExternalIPInThread] NAT-PMP: IP refresh did fail: -7
    Install log:
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: @(#)PROGRAM:Install  PROJECT:Install-735
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: @(#)PROGRAM:Installer  PROJECT:Installer-614
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Hardware: MacBookPro10,1 @ 2.30 GHz (x 8), 8192 MB RAM
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Running OS Build: Mac OS X 10.8.2 (12C3012)
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: TMPDIR=/var/folders/s_/kjdj96xj0y50zdqk_zrl0s5h0000gn/T/
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: SHELL=/bin/bash
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: HOME=/Users/KidNoob
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: USER=KidNoob
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: LOGNAME=KidNoob
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: SSH_AUTH_SOCK=/tmp/launch-6bZ1Un/Listeners
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: Apple_Ubiquity_Message=/tmp/launch-vrGAQ6/Apple_Ubiquity_Message
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: Apple_PubSub_Socket_Render=/tmp/launch-faovOF/Render
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: COMMAND_MODE=unix2003
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:3
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Kombiniertes OS X-Update  Installation Log
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Opened from: /Volumes/OS X 10.8.3 Update Combo/OSXUpdCombo10.8.3.pkg
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: Product archive /Volumes/OS X 10.8.3 Update Combo/OSXUpdCombo10.8.3.pkg trustLevel=501
    Apr 24 12:06:12 Kid-Mac.local Installer[3474]: JS: Package Authoring Error: Exception thrown while running volume check. TypeError: 'null' is not an object (evaluating 'my.target.systemVersion.ProductVersion')
    Found the solution with the ServerVersion.plist but there is nothing in my CoreServices folder.
    Thx for Help.

    Okay,
    finally I reinstall Mountain Lion,
    CMD+R, New Install!
    The only thing, you have to Install the newest Java Version, thats it!

  • Xtra package download error 125

    I am trying to get an xtra to download automatically in
    shockwave but I get an "Xtra package download error 125" everytime
    I try and run my published .dcr. The xtra is SequenceXtra 1.9. I
    have the download packs on my server, I have added the xtra to my
    xtrainfo.txt and I have added the xtra to my movie and set it to
    download if needed in the modify->movie->xtras menu (it
    checks my server for the download pack then and it seems to pick it
    up okay). Is there anything else I need to do or has anyone seen
    anything like this before?
    Thanks,
    DuncanJWitham

    What URL is prompting the download, and which browser and OS combination are you running?

  • Failed to evaluate package P01000XX, Error code 0x80070002

    I have a package that got deleted while it still had all the DP's listed under content location, so now I have every site flagged with a big yellow warning.
    Not really a big deal but before I could just look at all 54 secondary's at a glance and see green but now I have to select each one to check its status.
    Anyone know how to remove it like it never existing so my update status points will go back to green?

    Hi,
    Does the smsdpmon.log still say "Failed to evaluate package P01000F3, Error code 0x80070002" now?
    Please check the blog below.
    If the package is not on the site, you must remove the package from WMI on the distribution point. The namespace to connect to is root\sccmdp.
    Troubleshooting Content Mismatch Warnings on a Distribution Point in
    System Center 2012 Configuration Manager
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Some package installation error during zone installation steps.....

    hi,
    i am totally new to this technology.
    i had created 3 Zone's on X86 Sun Fire X4270 M2 Hardware (OS - Solaris 10 update 9)
    & during OS Installation i had selected Software installations using the Entire Distribution.
    every thing worked fine but during zone installation steps, got some package installation error (refer the below output)
    bash-3.00# zoneadm -z OFSMU-PWM-zone1 install
    Preparing to install zone <OFSMU-PWM-zone1>.
    Creating list of files to copy from the global zone.
    Copying <158400> files to the zone.
    Initializing zone product registry.
    Determining zone package initialization order.
    Preparing to initialize <1240> packages on the zone.
    Initialized <1240> packages on zone.
    Zone <OFSMU-PWM-zone1> is initialized.
    Installation of these packages generated errors: <SUNWpostgr-82-libs SUNWpostgr-82-devel SUNWpostgr-83-server-data-root SUNWpostgr-82-server SUNWpostgr-82-contrib SUNWpostgr-82-client SUNWpostgr-82-server-data-root>
    The file </zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
    i checked the log file "/zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log"
    its show below error's
    *** package <SUNWpostgr-82-libs> failed to install with fatal errors:
    *** package <SUNWpostgr-82-devel> failed to install with fatal errors:
    need your help my friends..
    thanks in advance....
    Edited by: Raja Kondar on Dec 9, 2010 11:59 AM

    hi DR,
    thnks for reply..
    but i can see that "postgres" already exist in the system as user &l group.
    postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
    also the failed packages duirng zone creation steps are already installed in the global zone..
    is thr any other way to resolve this issue....
    Edited by: Raja Kondar on Dec 16, 2010 11:00 AM

  • How to find packages with errors?

    I have this problem:
    When I compile all invalid packages, I get an error message saying there is one package with some errors. How can I find out which one is it? There is no red cross on any of the package displayed in the package tree.
    Thanks for help

    Hi, after some time I would like to go back to this issue...
    Last week I got this problem again, so I started to look for the problem.
    The thing is we are using multiple schemes and I compiled by accident one of the package bodies to wrong scheme. So there is an invalid package body without its specification... SQL Developer doesn't display such body, maybe because it always supposes there is some spec. This is another disadvantage of the tree structure you are using - package body should be on the same level as package spec!
    Currently if you do such mistake like I did, and use the Compile invalid packages feature, you get an error message about package containing errors and it's hard to find what is going on.

  • Package installation error during zone installation

    Hi All
    I am getting a lot of errors from package installations during zone installation
    Installation of these packages generated errors: <SUNWcsu SUNWckr SUNWgnome-base-libs SUNWgnome-audio SUNWtltk SUNWzoner SUNWzfskr SUNWzfsr SUNWzfsu SUNWzoneu SUNWtoo SUNWssad SUNWusb SUNWtavor SUNWudapltu SUNWopenssl-libraries SUNWwbsup SUNWPython SUNWbip SUNWxge SUNWxcu4 SUNWxcu6 SUNWcry SUNWntp4u SUNWqlc SUNWqlcu SUNWgnome-im-client SUNWgnome-img-editor SUNWsndmr SUNWsndmu SUNWsshcu SUNWsshdu SUNWsshu SUNWgnome-text-editor>
    When I look into /var/sadm/system/logs/install_log in the zone, I am seeing the erros are relate to file corruption:
    *** package <SUNWckr> failed to install - interrupted:
    pkgadd: ERROR: packaging file </var/sadm/pkg/SUNWckr/save/pspool/SUNWckr/pkginfo
    is corruptfile size <17259> expected <17199> actual
    *** package <SUNWsshcu> failed to install - interrupted:
    pkgadd: ERROR: packaging file </var/sadm/pkg/SUNWsshcu/save/pspool/SUNWsshcu/pkg
    info> is corrupt
    file size <6235> expected <7087> actual
    as an example, the pkginfo file referred to above has size 17199 and 7087 in the global zone so why is it thinking it should be 17259 and 6235? Could this be due to the patching done before the zone creation?
    thanks

    I just realized what is causing this but no sure what is the best way to get around this:
    we have another home grown package the overwrite the problematic files reported thay lay on top of the sun packages and zone installation does not like that. The original file size and check sum is checked against what was installed in the global zone and hence the warning messages.
    I would have thought it should pick the most updated ones especially it was overwritten by another package (and therefore it should have the updated information in the package database)?

  • Package check Error while activiating Append Structure

    Hi All,
    I have created an Append Structure for the Table HRP5136. When i am trying to activate the Append Structure the error "DDIC object TABL ZZHRS_EXTENDOFFER has package check errors" is thrown.
    How do i resolve this? Any input on this will be of great help.
    Thanks very much for your time
    Regards,
    Pavithra

    Hi,
    You r doing enhancements to the table .
    when ever u do any changes u need to give the package name.
    So find the package name of that table as follows.
    In the tables screen itself click on system-> status .
    there u will get the package name . give that name when u r activating the table.
    Reward If Helpful

Maybe you are looking for