Package deployment to Windows 8.1 devices

I currently am deploying Office 2013 to Windows 7 and Windows 8 devices through SCCM 2007 R2 and it is working fine.
However we now have some Windows 8.1 devices that need Office 2013 and when i try to amend the Program Properties of the package I am unable to see Windows 8.1 within the Requirements tab
I need to be able to deploy applications to Windows 8.1 devices. Any help in this will be appreciated.

Hi,
Have you installed the following hotfix in your SCCM 2007 sp2 Environment? It should add Windows 8.1.
"An update is available that adds support for Windows 8.1 and Windows Server 2012 R2 to System Center Configuration Manager 2007 Service Pack 2"
http://support.microsoft.com/kb/2861663
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

Catia V5R21 package deployment on windows 7 x64 doesn't complete - Non fatal execution error 0x87d01100

I am trying to deploy Catia V5R21 on windows 7 x64 machines, deployment starts but doesn't not complete using sccm2012 R2
I can deploy software to windows 7 32bit machine fine using sccm2012 R2. Also manual install on windows 7 x64 works fine.
here is the script I am using-
cmd /c install.cmd
xcopy "IBM LUM Directory" "C:\ProgramData\" /E /C /R /H /K /Y
1\win64\startb.exe -u "c:\program files\Dassault Systemes\R18" -newdir -ident R18 -D "C:\ProgramData\DassaultSystemes\CATEnv" -l "DIC.slt" -v -noreboot
I can see files copied over client machine and "c:\program files\Dassault Systemes\R18" get created, also an entry appear in control panel>programs and feature.
Problem I am having is deployment doesn't complete.
I checked logs under Execmgr.log on client machine and found errors
Raise Program Error Event for program Catia. The exit code is 55, the execution is FailureRetry
Non fatal execution error 0x87d01100 encountered for program Catia V5R21
I can't see program installed under All Programs and SCCM monitoring status stuck in progress
Any help will be greatly appreciated..
Thanks in advance
RJ
RJ09

I have tried following suing start /wait
start /wait xcopy "IBM LUM Directory" "C:\ProgramData\" /E /C /R /H /K /Y
1\win64\startb.exe -u "c:\program files\Dassault Systemes\R18" -newdir -ident R18 -D "C:\ProgramData\DassaultSystemes\CATEnv"
-l "DIC.slt" -v -noreboot
same results, deployment failed with exit code 55 and slight different error
IMaintenanceCodeinator::GetState failed with error code 0x87d00317
Monitoring status is In Progress..
RJ09

Windows Intune support deployment for windows phone (8.1) *.appx files

Hi
We are trying to deploy a windows phone 8.1 appx file with intune (over sccm console). the appx file is signed with a valid symantec certificate.
the installation of the app fails, either when we upload the file as "Required" (so pushing it automatically to the devices) or when we make the app on the company portal app available.
in the sccm console the deployment status says failed -> unkonwn error.
when we use .xap file of an windows 8.0 app, it works like a charm and the xap file is signed with the same certificate.
My question is, is there no support for publishing windows phone 8.1 appx files on Intune? Or what can it be?
Thanks for any hints

UPDATE
According to these links and the comments from Mitch Denny, can somebody confirm that .appx files (company apps) cannot be deployed/installed on windows phone 8.1 yet?
http://blogs.technet.com/b/windowsintune/archive/2014/05/12/what-s-coming-next-with-windows-intune.aspx
http://blogs.technet.com/b/windowsintune/archive/2014/04/28/availability-of-update-to-windows-intune-for-windows-phone-8-1-and-samsung-knox-standard.aspx
I would really appreciate if someone can confirm me this, because im struggling with this since days and there is no official statement from MS.
Thanks

How to move an existing Application/Package Deployment from one collection to another

We'd like to move an Application Deployment from one collection of devices to another. Instead of just creating a new deployment (which would make the app try to reinstall) we'd like to move the existing deployment.
Any way to do this with PowerShell?

Creating a new deployment won't make an app try to reinstall at all. That's the whole point of the Detection method.
For packages, clients keep track of what they've run before so a new deployment won't cause it to run again unless the program is set for it to run again.
Ultimately, you cannot change the collection targeted by a deployment as this violates a f underlying assumptions and messes up compliance/reporting for that deployment. You need to create a new deployment which as pointed out has no down-side.
Jason | http://blog.configmgrftw.com

Machine deployed from Windows 8.1 media with Update slipstreamed prompting for installation of KB2919355

I'm preparing a "Windows 8.1 Update" OS deployment in SCCM and have encountered an issue.
Here's what I did:
Downloaded SW_DVD9_SA_Win_Ent_8.1_64BIT_English_-2_MLF_X19-49847.ISO from the Volume Licensing site
Extracted install.wim from the ISO
Mounted the WIM with DISM to add the KB2959977 package (as directed
here, using
these instructions)
Deployed the image with SCCM
After imaging a VM and booting it, I went into Windows Update and was prompted to install "Windows 8.1 Update for x64-based Systems (KB2919355)". It is my understanding the media I used should have the Windows 8.1 Update integrated into it. Can
anyone explain why Windows Update is offering this update to be installed?
Edit: Here's the output of "dism /image:mount /Get-Packages" ran against the WIM which confirms the KB2919355 package is applied to the WIM:
Deployment Image Servicing and Management tool
Version: 6.3.9600.16384
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 18/03/2014 9:30 AM
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 2:46 PM
Package Identity : Microsoft-Windows-Security-SPP-Component-SKU-Enterprise-GVLK-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 9:51 AM
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2919442~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 18/03/2014 9:55 AM
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2939471~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 16/04/2014 11:19 PM
The operation completed successfully.

This is explained in this KB article, where it states:
The MSDN and VLSC updated ISOs do not contain the complete set of fixes that are offered from Windows Update. Therefore, Windows Update and WSUS will offer the KB2919355 update again to computers that are deployed by using the images in these ISOs. This
is expected and does not result in the full reinstallation of the Windows 8.1 Update but only one smaller component of it. The rest of the update will not be downloaded or reinstalled.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

We are trying to package our iTunes Windows and we can't stop the auto update feature. How can we do this?

We have consultants here packaging many of our Apps for deployment with Windows 7. We cannot find a way to turn off the auto update feature within iTunes for Windows. Has someone been successful in packaging iTunes for Windows and NOT do the auto update piece?

The Apple advice revolves around the editing the registry:
Windows OS Managed Client: How to manage iTunes control features
... but it's beyond my competence to advise how to work that particular registry edit into a deployment, I'm afraid.

Crystal Report XI R2 Sp6 - Deploy on Windows 7

i'm trying to deploy CR XI R2 on p.c. with windows 7 32bit/64bit
i'have buil a setup package with contains a reference to "CrystalReports11_5_NET_2005.msm"
i have installade this package on my test machine and i try to use my local web app to print
(i have reference to:
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/></assemblies>
application don't work
it's possible that i can't deploy on windows 7?
tahnk you

It would be really nice to have more than just "application don't work :-("
CR XI SP 6 is supported on WIN 7. But, more info is required;
What error messages are you getting?
What's the behavior?
What do you actually see?
What are the symptoms?
What is the version of crpe32.dll on your development computer and the Win 7 computer?
The more info you give, the more likely it is we will be able to resolve it.
Ludek

How to force Windows Mobile Professional device to use only Wi-fi network provisioned through Afaria 7 SP4

Hi
We are deploying Windows Mobile Professional devices on our environments. All the devices connects only to internal network through Wi-fi. Our security policy do not allow these devices to be connected to any other network (Other Wi-fi, Cellular etc). Is there any way to force the devices to use only the Wi-fi network provisioned through Afaria.
Tags edited by: Michael Appleby

I have the same problem with an early 2013 macbook pro. gfxCardStatus ( http://gfx.io/ ) will allow you to force integrated and not do dynamic switching, however the external display still doesn't work.

Setup Package NTW04s Sp15 :"Could not retrive device Id" and other

Dears,
we configured the setup package creation with NTW04s SP15:
One device configurator for the MI70 Client Jsp; one device configurator for the DB2e;
one device configurator for the MAM application.
We defined the Parameter Set into the device configurator for the MI70 client.
We assigned these device configurator to the Hierarchy group and used a technical user for the setup package creation.
The creation aborts with the error 'Could not retrive device ID'
Beside we try to define an installation sequence number for these device configurator, to be sure the MI70 client is installed as first with the proper parameter set, the DB2E as second and the MAM as lates but it's not clear how to do it.
If we assign inst. sequence 1 to the MI70 client the NWA says something like 'cannot assign sequence number to framework', while if we assign 1 to the DB2E we recive a msg like 'sequence number are not consecutive...'
regards

up pls
we suspect the Setup Package creation is not allowed on Windows 64 bit.
Probabily the natstart.dll cannot work properly as it is on 64 bit, as maybe it is designed to run on 32 bit , as the windows pc are.
But we used Windows in order to be able to use the setup package creation, we cannot setup up a separate J2EE istance on 32 bit just for the setup package creation.
Beside now the NTW04s sr3 is supported only on 64 bit platform.
Any advise ?
Regards

Packaging applications for Windows 8 tablets

Hello,
Is it possible to package and distribute Windows 8 applications to tablets? The application I need to deploy will be an in-house application. We have SCCM 2007 SP2, the source
will be given as .APK file.
Please guide me on how this can be packaged and deployed from SCCM 2007 SP2 (4.00.6487.2000)
Thank you!

With ConfigMgr 2007, no not possible with the built-in toolset. You could probably do it by using a PowerShell cmdlet though as at the end of the day ConfigMgr simply delivers the files you specify and runs the command you give it.
With ConfigMgr 2012, yes with caveats.
First, define "tablet"? ConfigMgr manages operating systems, not hardware so tablet is meaningless. Thus, what OS are you talking about? Windows 8.x or Windows RT?
For Windows 8.x, yes, ConfigMgr 2012 SP1 will natively deploy modern apps. For Windows RT, you need to integrate Intune into ConfigMgr and then you can deploy modern apps to them as well.
Jason | http://blog.configmgrftw.com

Deployment software windows update

HI,
I created a deployment software windows update
I sent it to the station -in the monitor ,It shows me that it has been installed
But the station did not receive a warning of something installed, I looked in software center and there does not appear in the package I spread the message.
Where can I make sure it is installed?
thanks
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.

I do not see the updates in View installed updates
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.
The first place to look for any deployment status is logs . logs can help you what is going behind the scenes.there is no point always looking at software center if something not working. You never provide the sufficient/correct information about your problem.
Did you deploy software update ? if so ,how ? using SUP method or application or package ? troubleshooting steps varies for each method.
if SUP,look at updatedeployment.log,updatestore.log
if package,look at execmgr.log
if application,look at appdiscovery.log,appenforce.log,appintent.log.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Reading data file(txt) present in a file system from a package deployed in SSISDB

Hi,
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying
in SSISDB is running for infinite time. Any idea? Is it a permission issue?
Thanks
Ayush

Hi Ayush,
If I understand correctly, you directly execute a package from the file system source via Execute Package Utility, it works fine. When you right-click on a package under Integration Services Catalog \ SSISDB \ <Folder name> \ Projects \ <Project
name> \ Packages \ <Package name> and select Execute... to run a package in SQL Server Management Studio, it fails.
When we execute a package under Integration Services Catalog, the package will run under the credentials used to connect to SQL Server Management Studio. Please note that we need run the package using Windows Authentication.
As to your issue, please make sure the account connects to SQL Server Management Studio has required permissions to access the file folder and file outside the SSIS package.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Ow can I find the platform to deploy in Windows Universal?

ow can I find the platform to deploy in Windows Universal?

Hi,
Hope you trying to find device on which the App is running.Simple Way to find out the device in which an universal application is running like surface or Phone.
using Windows.Security.ExchangeActiveSyncProvisioning;
var device = (new EasClientDeviceInformation().OperatingSystem != "WindowsPhone") ? "I am Windows" : "I am Window Phone";
Regards,
Selva Ganapathy K

How to run an application on windows mobile 6 device ?

Hi everybody,
How can you run an application on a windows mobile 6 device with the new SDK 3.0 ?
Can you launch a MIDLET like any other program ? or running your MIDLET on windows mobile 6 is only for testing while you are developing.
When you finished your MIDLET, can you copy the jar file to the mobile device with windows mobile 6 and to run it anytime ?
Thank you.

Its simply a matter of opinion, but I'm 3-months-in, developing for WM5 + WM6 and the only usable solution I've found that has the correct look and feel on Windows Mobile as well as JSR support is IBM's J9.
It's not free, but I searched high and low, and it's the only product that I was happy with.
Here's a [screenshot of it running my application on WM6 emulator|http://3.bp.blogspot.com/_9hmP3Ho0t14/S7eDTXfkE9I/AAAAAAAAAa0/ISZ-HohZQDs/s1600/wm6.png] .
Here's a [quick article I wrote for it.|http://fatbuttlarry.blogspot.com/search?updated-max=2010-02-16T11%3A34%3A00-08%3A00&max-results=7] Remember, it's NOT free. Pricing is very fair, but you'll have to license it to use and distribute it.
-Tres

Best report to check application and package deployment compliancy?

I am looking for the best report to check application and package deployment compliancy.
Preferably targeting a collection.
tconners

I'm recommending this one:
Software Distribution - Application Monitoring folder -
All application deployments (advanced)
It allows you to select Collections and applications
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Package deployment to Windows 8.1 devices

Similar Messages

Maybe you are looking for