Package in read mode search (created under feature request)

Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
Impossible to search in a package in read mode
Message was edited by:
rachid.boulawan
Message was edited by:
rachid.boulawan

In the past I thought you could, but it doesn't look like you can anymore. Just make sure to search first before adding a request. My gut tells me that about half of your requests should already be in there and you can simply vote for them to up their weight.

Similar Messages

  • After crash recovery (created under feature request)

    Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
    Running under WinXP
    Issue description:
    State before crash is not recovered after the crash.
    Message was edited by:
    rachid.boulawan

    Feature requests go here:
    sqldeveloper.oracle.com

  • How can I read a document created under "pages" on a Mac book air on an other computer

    How can I read a document created under "pages" on a Mac book air on an other computer or even send this document in a mail to anyone ?

    Only Pages, Preview, Pages for iCloud beta, and Pages v2 or later on IOS 7 can open native Pages v5.2.2 (.pages) documents. Sending a Pages v5.2.2 document to someone without Pages v5.2.2 is futile.
    If you are using Gmail or Dropbox, you will need to right-click on that Pages document, and then choose compress from the contextual menu. You can then attach filename.pages.zip, because it appears as a single document, and not a folder.
    Pages v5.2.2 has a Share button on the Toolbar. Providing your document is already in iCloud storage, you can Send a Link to iCloud via the following:
    The Share toolbar icon also allows you to Send a Copy to Email, Messages, and AirDrop. This will present you with the document export sheet, the same one you get if you chose to File > Export To menu item, as the alternative.
    If you are sharing document content with an MS Office user, then the document you want to send them is either a Word .docx, or .doc. If they want just a read-only view of your content, send a PDF, for improved cross-platform exchange.

  • Q: How to Search / Post Enhancement / feature requests?

    I read Sue Harper's note, went to site, could not figure out how to search to see if what I wanted was already there or not ... did not want to wade thru lots of stuff (all good, I'm sure).
    Here's what I'd like ...
    When I click "Dependencies" on a table, I'd like to see where it is ref'd as a Foreign Key.
    When I look at constraints and Foreign Keys, and right click a table there, I'd like a "Go To [table]" as per other spots where the Go To functionality is offered.
    Packages have Dependencies and References ... but I guess I'm not clear what is different.
    Called by? Called From? Uses? Is Used By?
    Or ... could tables and views have References also (meaning, who has called / used me?)
    Finally, with regard to references, it would ALSO be useful to simply know where an object's name was mentioned ... in case it is embedded (however rightly or wrongly, Tom Kyte!) ... in dynamic SQL somewheres ... e.g., these two queries are REALLY handy ...
    select NAME, TYPE, line, text
    FROM user_source
    where UPPER(text) like upper('%YourSearchBitHere%')
    order by NAME, line;
    select distinct NAME, TYPE
    FROM user_source
    where UPPER(text) like upper('%YourSearchBitHere%')
    order by NAME;
    (where '%YourSearchBitHere%' is judiciously composed with percents and underscores to find the right mix of whatever is being sought)
    ... so, for all objects, 3 categories: "I Use" / "I am Used By" / "I am ALSO mentioned in"
    Thanks.
    (this is not in v3.1.07.42)
    Kind regards,
    SM

    Hi,
    first u have to raise as normal service request in support.oracle.com
    then based on communcation with oracle expert he can raise ur request as enhancement request
    mark as helpful,if found useful
    thanks

  • How to Publish on the Web a PDF document in Reading mode only

    Hello,
    I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
    Thanks.
    PATEGA

    Thank you for your reply.
    De : Test Screen Name 
    Envoyé : 15 septembre 2014 05:51
    À : Gaétan Patenaude
    Objet :  How to Publish on the Web a PDF document in Reading mode only
    How to Publish on the Web a PDF document in Reading mode only
    created by Test Screen Name <https://forums.adobe.com/people/TestScreenName>  in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511>

  • [Feature Request] DSL line stats & manual IP settings for PPPoE/PPPoA

    After having replaced a Funkwerk R232aw with a Cisco SRP547W I noticed that the software (we're on 1.2.4(003) from Jan 2012) on the Cisco device omits very basic functionality which is even availabe in the cheapest of consumer routers. Therefore I make this feature request in the hope that this may be read by someone from Cisco who could forward this to the development team for consideration for the next software update.
    What's missing:
    - There are only very basic DSL line stats available, and no DSL line uptime. Only if the URL is changed manually to https://[router ip]/dsldiag.asp then a hidden config page with full line stats including framing errors (unfortunately still without uptime!) becomes available. It is not described in the documentation how to find this page, and I only found out by coincidence. Full DSL line stats including error counter data and line uptime are crucial when diagnosing performance and reliability problems on the ADSL side, and really *NEED* to be available from the menue! Considering that the page already exists (albeit hidden), it shouldn't be too dificult for Cisco to include it into the menue structure and add line uptime information.
    - PPPoE and PPPoA apparently are DHCP only. This is a major problem for someone with a static IP and a provider which doesn't do DHCP. It also prevents someone from avoiding using the DHCP-assigned provider DNS servers if the SRP should remain as DNS proxy. As with DSL line stats, being able to set the IP config manually for PPPoE and PPPoA is a very basic functionality that really should also be available in the SRP.
    I am also aware that Cisco aims the SRP (Services Ready Platforms) Series at service providers which then give them to their customers preconfigured, and them the lack of the aforementioned functions may indeed be of no concern. However, fact is that the SRP is also sold as an individual product on the open market, to be used with any ISP. And in this environment this functionality is really important. Therefore it would be great if Cisco could include them into the next firmware release for the SRP500 series.
    What else:
    - Password Complexity Settings: doesn't say what is meant by "complexity" (even if disabled short passwords are not allowed). When clicking on "help" to find out, I get the Troubleshooting FAQ telling me what to do if WiFi doesn't work or there is no dial tone. The help should be fixed to point to the right page, and maybe a small line explaining what is meant by complexity could be added.
    - Log Viewer: would be nice if downloaded logs would come with the .txt ending
    That's all ;-)

    Hello Ben, thanks for the well written post.
    To make a formal feature request, we will need to create a service request (case number). I will be happy to do this for you. If you could please gather documentation for me and make a zip package which contains-
    Firmware version
    When is the last time the unit has been factory reset
    Router config file
    Basic topology
    Who is your ISP
    What service you're using (what kind of dsl)
    Summary of problem description
    Screen shot of where you'd like to see the feature implemented
    Relevant contact info including name, business, telephone, email address
    Any additional information you feel helpful to make your point
    Please send me an email with your Cisco ID and device serial number with this packaged. I will then create a service request and submit for review. My email is [email protected]
    In the mean time, here is a great post
    https://supportforums.cisco.com/message/3717617
    -Tom
    Please rate helpful posts

  • Working collection, not necessarilly pinned - New feature request

    Do you think this is a useful feature?
    Currently when you are working with objects the only way to keep "non-editing" windows is to pin them.
    Can this behaviour be extended as a new node that allows you keep a "working collection" of different object types. The method of user operation that I can see is have a context menu on each object in the node, do a right click "Add to working list".
    * Having the ability to add objects maybe from a different schema to the list could be nice. That way the "working collection" is not limited to a connection.
    * If this list of objects can be saved for later reuse, it could make it even more functional.
    Is it possible to do this as a customisation/extension?

    Have you created an feature request for this on the Exchange? Or identified any existing request that is equivalent? Sounds worthwhile.No I haven't. I was hoping for some community response. It seemed like something some would have requested.
    I like your idea of a restore. A ability to restore via a session manager even more powerful (As long as dead/obselete objects and broken connections are managed well).
    My suggestion was more inclined towards the "project based working" mentioned by Jim.
    I did a little bit of digging around and found this, [Favorites folder to store a collection of objects|http://apex.oracle.com/pls/otn/f?p=42626:39:3557915450647134::NO::P39_ID:301] : Accepted
    Thanks for replying Sue. Any chance "[Favorites folder to store a collection of objects|http://apex.oracle.com/pls/otn/f?p=42626:39:3557915450647134::NO::P39_ID:301]" would make into version 2.0?

  • (feature request) Save bookmarks

    I've been using sqld to do some pl/sql development recently and it is great. A feature that would make it even better would be the ability to save bookmarks. If I have a package nicely bookmarked it's great....until I shutdown sqld. At which point all my bookmarks are lost. This essentially makes bookmarking useless. I'm not going to bother setting up bookmarks if they're going to be lost every time I shutdown.

    I like the idea. Please post over at http://sqldeveloper.oracle.com under feature requests so that people can vote on it.
    Regards,
    Eric

  • New UE-V UserVoice Site Launched - Post Your Feature Requests Today!

    The UE-V Engineering Team has created a UserVoice site to allow you to easily enter feature requests. UserVoice allows you to create new feature requests or vote on existing ones. Voting lets you to tell us what is important to you.  UserVoice
    is not a place to post bugs or issues.  Please continue to use this forum to get assistance with configuration, issues, or general questions.  Use your standard Microsoft support channels for support issues that require additional assistance.
    The site can be found at https://uev.uservoice.com.  We'd love to hear how you want us to improve the product, so start submitting and voting for features today!
    The UE-V Engineering Team

    Why there is no MBAM product at Connect Microsoft Portal? I´m not so interested into login some 3rd party partner site just because of providing feedback for MS. Isn´t MBAM important service for MS, that you don´t added it to your regular feedback site?
    Hope you take this feedback forward. I would also like to submit, that 2.5 verson has some lacks when controlling Windows to Go aka USB stick encryption. I would love to see MBAM Client to take full control of it, not OS.
    Thanks :)

  • New MBAM UserVoice Site - Post Your Feature Requests Today!

    The MBAM Engineering Team has created a UserVoice site to allow you to easily enter feature requests. UserVoice allows you to create new feature requests or vote on existing ones. Voting allows you to tell us what is important to you.  UserVoice
    is not a place to post bugs or issues.  Please continue to use this forum to get assistance with configuration, issues, or general questions.  Use your standard Microsoft support channels for support issues that require additional assistance.
    The site can be found at https://mbam.uservoice.com.  We'd love to hear how you want us to improve the product, so start submitting and voting for features today!
    The MBAM Engineering Team

    Why there is no MBAM product at Connect Microsoft Portal? I´m not so interested into login some 3rd party partner site just because of providing feedback for MS. Isn´t MBAM important service for MS, that you don´t added it to your regular feedback site?
    Hope you take this feedback forward. I would also like to submit, that 2.5 verson has some lacks when controlling Windows to Go aka USB stick encryption. I would love to see MBAM Client to take full control of it, not OS.
    Thanks :)

  • Feature Request: Make a Setting Option for Export - Media - What to Render

    As I just changed after many years with Premiere Elements to Pro, I certainly find many things just anconversant.
    But there's one thing I really can't take: When I'm trying to render a project, there's a small selection list near the bottom of the "Export Media" window saying "export area". Here I can choose between "complete sequence", "work area", "sequence in/out" and "defined by user". This option jumps always back to "work area"!
    That's at least for me very unconveniant, because in 99+ % of my renderings, I need "complete sequence". Normally the software remembers the last used setting, but not in this case. I can imagine that one can fight about what's the best default setting: I Guess everyone is using Premiere differently. So in my opinion a predefined setting option would solve best for all: Just add one mor setting in the Presets section, maybe in "General" or make a new rubric "Export" or something. Just a place where everyone can predefine which setting for the export media area option he likes.
    No big deal, just one more presettings option!
    I hope I could make myself clear what I'm meaning
    Thanks in advance!

    Hi Lutzz,
    When I'm trying to render a project, there's a small selection list near the bottom of the "Export Media" window saying "export area". Here I can choose between "complete sequence", "work area", "sequence in/out" and "defined by user". This option jumps always back to "work area"!
    That's at least for me very unconveniant, because in 99+ % of my renderings, I need "complete sequence".
    You can create a feature request here: http://adobe.ly/feature_request
    Thanks,
    Kevin

  • I have created a featured news bloc under a tabbed panel,

    I have created a featured news bloc under a tabbed panel,
    how and where can I change my featured news items from one tab to the next?

    Hi,
    You can edit the information using Inbrowser Editing. For example, if you are using Business catalyst as a host, then take a look to the image below
    Please let me know if you have any other query.

  • Searching subfolders under Driver Packages

    Hi
    I am trying to do a search on my Dell Specific driver packages in the 2012 console, each model is in a separate folder. When I go to "Driver Packages" under Search the "All Subfolders" option is not available. Is this intended by design?
    I can seach subfolders under regular packages.
    I want to create prestaged media for all my dell driver packages but cant do a search of all of them since each is in a separate folder. Is there another way to do this?
    Thanks

    It seems to be "by design". You could create your own PowerShell script to find in which folder a package is located (see:
    http://www.petervanderwoude.nl/post/get-the-folder-location-of-an-object-in-configmgr-2012-via-powershell/).
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • I can't find the READER Mode in the Search window?  I'm using OS X  10.10.1 and Sarfari 8.02

    Once in a Web-Site, if I wish to read an article I could click on the READER box in the Search Window and just the article would come forward blocking out everything else.

    If an article is "Reader" capable, a 3½ bars  gray icon will appear  at the left most part in address bar
    Click it and it will turn black indicating that the article is in Reader mode.
    Best.

  • Running App-V 5.0 package in read-only mode.

    Hello.
    I have sequenced Firefox with an older version of Java that is used to run a web application.
    Is there a way to run the package in read-only/sandbox mode, or so that changes done during the session will be discarded as the package is closed?

    Hi,
    not directly: App-V itself doesn't have a 'entirely ready-only' mode. 
    There is one setting in the Sequencer to enforce NTFS access permissions inside a package (so that user can/can't write to the virtual C:\Program files or alike). This setting has been intorduced with HF4 for App-V 5 SP2. Before that, the ACLs were enforced.
    However this doesn't help to address your requirement.
    What you could do it to remove user-made changes when the application closes. (so remove the reg values in HKCU, remove modified files in Appdata, Localappdata..), but this isn't easy to achive, as the App-V scripting interface does not allow to run post-shutdown
    scripts inside the protected environment (so, you can't trigger anything that launches _after_ firefox ended but that still has access to the virtualized HKCU\Software\Mozilla|Firefox locations. 
    There are some workarounds, like to remove the resources from the _redirected_ location afterwards (HKCU/Software/AppV... somewhere, see http://www.virtualvibes.co.uk/where-the-app-v-client-puts-stuff/ for
    the general locations) or you could use a 'wrapper' application that is running inside the virtual environment and, launches Firefox itself and cleans up stuff after FFox ended. Both are not really nice.
    You could be able to redirect some settings to "non-appv'ed" locations outside of the virtual environment, but this basically is only usabel for files/folders (not reg values)
    If you are using a User Profile Management solution, you should be able to tell that to either ignore certain applications or to explicitely clean up stuff. If the UPM solution supports App-V 5, it should be able to handle it.
    Note that App-V does not allow the user to change _any_ 'programmatic' files inside the virtual environment (like .js); see http://blogs.technet.com/b/gladiatormsft/archive/2013/10/24/app-v-5-on-that-issue-with-firefox-where-you-cannot-save-preferences.aspx. 
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

Maybe you are looking for