Package in Stacks
In Stacks - View content as lists.
The iPhoto's package turns into a normal Finder folder.
Is that a way to prevent this? I want just a packet not a folder in the list view.
Thanks
Message was edited by: Verzig
Very odd, especially that it’s intermittent.
Post on the Using Mac OS X forum, folks there may have an insight to what’s going on. This isn’t really an iPhoto thing, it’s more of an OS thing.
Regards
TD
Similar Messages
-
MOPZ - yellow warning does not allow to continue with generation of package
Hello,
Using Solution Manager (SM) to generate package and stack configuration
file for upgrade.
XXH is an HR, 640, with dual stack due to XSS. In SM, converted the
product version from ECC to ERP 2004 using SMSY_SWITCH_PRODUCT, there is no inconsistency.
Edited to add product instances - Portal Content and Enterprise Portal to link to XKP (JAVA system with Adobe Document Services, Application Server Java and Enterprise Portal. It is now showing in SMSY with the following product instances.
- SA ECC Server
- Portal content, pointing to another JAVA system XKP
- SAP NW - Entreprise Portal - pointing to XKP also
- SAP XSS - pointing to XKP also
In MOPZ, selected XXH, 'Upgrade with EHP' --> EHP4 on NW701. It shows the following warning
Attention! Software Component Version ESA ECC-SE 501 is installed!
Attention! Software Component Version BI CONT 3.53 is installed!
Then selected several technical usages
- ESA ECC-SE
- SAP ECC Server VPack successor
- Central Applications
- HCM
- Portal Content
- Portal Content Self Services
- HCM Self Services
- Self Services
However after the calculation it sill show the yellow warning below and
does not allow to continue, even if I try other technical usages.
Attention! Software Component Version BI CONT 3.53 is installed!
Anything missing here?
Regards,
TerryHello,
The document 'How to install EHP4' has the following
...' If you are combining the installation of SAP enhancement package 4 with an upgrade, you have to register the system according to the start release.'
Since it was ECC 5.0 and converted the product version (using SMSY_SWITCH_PRODUCT), it is 'SAP ERP 2004'.
The MOPZ log below, the first 4 lines are coming out as red
15:07:30 Attention! Software Component Version BI CONT 3.53 is installed!
15:07:30 Please check the instructions under the logging tab.
14:56:36 Please check the instructions under the logging tab.
14:56:36 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53 Product version of system not suitable for Netweaver
14:36:53 Technical Usage SCM .
14:36:53 Technical Usage ESA ECC-SE .
14:36:53 Attention! Software Component Version BI CONT 3.53 is installed!
14:36:53 Attention! Software Component Version ESA ECC-SE 501 is installed!
14:36:53 Please check the instructions under the logging tab.
14:36:10 Component BI CONT 3.53 without suitable Product Instance <--
The last line could be causing the error, but has not found any way to resolve it in SMSY. Any idea?
Regards,
Terry -
JSPM not showing all the packages,
Dear All,
I am upgrading the Java stack from 700 SP 015 to 701 SP 003 using JSPM.
I have downloaded all the packages including stack.xml file and placed in EPS/in directory.
To start the upgrade, I selected Support and Enhancement Package Stack.
But it ended up showing only JSPM package in the queue. All the other packages included in the directory are not visible.
Do the packages appear after the JSPM upgrade?
Please help me.
Thanks and Regards,
Yuva.Hi,
The problem which you are getting because Java patches information is not present in stack xml file. Could you please check whether stack xml file contains all java packages ?
Also, while downloading stack xml file from SMP, please make sure that you select all usage type installed on your Java system otherwise you will miss packages in stack xml file.
Thanks
Sunny -
Hi
We have ECC 6.0 on support package 12. I want to implement enhancement package 3 stack 2 and SAP HR 34. SAP note 1130534 says the requirements for HR sp's EA-HR 6.00 and SAP HR 6.00 is sp29. Currently we have EA-HR and SAP HR sp 21.
Also that the enhancement packages and support packages should be included in one queue , so that the SPAU and SPDD can be done once.
What can I do in this case ? Do I upgrade EA-HR and SAP HR to 29 before putting the enhancement packages ? and perform the SPAU list twice .
Regards
ThembelaHi Thembela,
you can apply this in one queue or first go to Enhancement Package 3 Stack 2 (~ECC 600 SPS 13) and then apply the 5 remaining HR-SPs (SAP_HR/EA-HR SP 30-34 or 04-08 for EA-HR 603 depending on your selection).
Also in the 2nd case the SPAU-effort is reduced since the following 5 SPs are on top. Nevertheless the same objects could be toched again in some cases.
If you would first goto SP 29 this would not make much sense since the Enhancement Package 3 will then bring up the equivalent corrections again. This would result in higher SPAU-effort.
Best regards,
Christoph -
Not able to download stack using MOPZ (There is no OS/DB dependent file)
Hi,
I want to download ERP 6.0 EHP4 Stack 8. I am having solution manager 7 with EHP1, so once I select the Target enhancement package product version & Target enhancement package stack. I get option of selecting the Technical Usage, In that I select Central Application & HCM, but when I continue to next step 2.3 Select OS/DB-Dependent files, I get message "There is no OS/DB dependent file" along with below mentioned messaged
EA-IPPE 400 SAPKGPID19 is not available for user S0003575872
SAP_APPL 604 SAPKH60409 is not available for user S0003575872
Please suggest, as I am stuck and not able to download the stack.
Regads,
Manish SharmaHi
ERP 6.0 EHP4 SPS09 not yet released, see the sap note Note 1064635 - SAP ERP Enhancement Packages: SP Stacks Release Info Note
please again check what you done on step 2.1 in MOPZ, have you selected proper target stack version?
if you not sure on the steps info pls read the help link here
[http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm]
Jansi -
Help with support package EHP1 or 2
Hello guys
i'm lost
I installed SAP CRM 7.0 EHP1.
in support package
SAP_BW SAP Business Warehouse:
-SAPKW70204 BW Support Package 04 for 7.02
-SAPKW70205 BW Support Package 05 for 7.02
-SAPKW70206 BW Support Package 06 for 7.02
-SAPKW70207 BW Support Package 07 for 7.02
SAP_AP SAP Application Platform
-SAPKNA7020 SAP_AP 700: Support Package 0020
here is asking the pre-requisit: : SAPKW70023 ...
-SAPKNA7021 SAP_AP 700: Support Package 0021
-SAPKNA7022 SAP_AP 700: Support Package 0022
here asking SAPKW70024
-SAPKNA7023 SAP_AP 700: Support Package 0023
here asking SAPKW70025
this SAPKW70023/4/5 are from 700, i have 7.02...
how can I solve this situation??
Thank you very much.Hi,
When you look the "OCS Package Directory: New Packages" it's possible to see some SP pre-requisit which is no longer support your release. You can see " X" in front of those SP..
Please see the SAP note " Note 1064635 - SAP ERP Enhancement Packages: SP Stacks Release Info Note " carefully. This note update regularly and you can find the equivalent support package for those pre-requisit SP which is no longer valid for your system.
Find out the equivalent SP as per your system and apply those equivalent in place of those pre-requisit SP.
With Regards
Bhuban -
Hello,
Im going through this document;
Master Guide ; SAP Enhancement Package 5 for SAP ERP 6.0 Powered by SAP NetWeaver
Using SAP Enhancement Package 5 for SAP ERP 6.0 and SAP NetWeaver 7 including Enhancement Package 2
Im having a point to clarify;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack. This approach reduces installation, modification adjustment, and testing effort. Using this strategy, you can install SAP enhancement packages as a normal maintenance activity together with Support Package stacks.
Whats meant by ;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack.
Can you help me to clarify this with an example
regards,
ZerandibHi,
Let me give you some basic example to make this statement clear.
We should first of all distinguish between the terms upgrade and update.
UPGRADE means from one Major release level to Another Major Release. Eg: R/3 46C to ECC 6.0
UPDATE means it can be either support package for installed components or Enhancement Packages for existing component.
Instead of upgrading the the entire RELEASE SAP has come up with EHP updates. This give you all major new changes without
doing a complete release upgrade. Also Downtime is reduced.
Consider this component
SAP_HR 470 0010 SAPKE47010 R/3 Enterprise 4.7 system
If this is upgraded to EHP 5 then the naming convention becomes
SAP_HR 605 0043 SAPKE60543 ECC 6.0 with EHP 5
Just like how we have support packages for each component. WE have support packs for the enhancement packages too.
More information can be pbtained in the below link
http://service.sap.com/erp-ehp
Refer to this SAP notes for further understanding.
1484460 EHP5 for SAP ERP 6.0 SP Stacks - Release & Information Note
1064635 SAP ERP Enhancement Packages: SP Stacks Release Info Note
1298878 Installation of SAP Enhancement Package 5 on SAP ERP 6.0
774615 Support Package levels of ERP/ECC installations/upgrades
I hope I was able to clarify your questions.
Regards,
Naveen.
Edited by: Naveen Kumar on Feb 29, 2012 10:41 AM -
Hi,
When I try to build docky-stacks-bzr (https://aur.archlinux.org/packages/docky-stacks-bzr/) I get the following error:
[code omitted]
make[1]: Entering directory '/home/venom/xfce/docky/stacks/src/stacks/po'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/venom/xfce/docky/stacks/src/stacks/po'
Making all in Docky.CairoHelper
make[1]: Entering directory '/home/venom/xfce/docky/stacks/src/stacks/Docky.CairoHelper'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/venom/xfce/docky/stacks/src/stacks/Docky.CairoHelper'
Making all in Docky.Services
make[1]: Entering directory '/home/venom/xfce/docky/stacks/src/stacks/Docky.Services'
Compiling Docky.Services.dll...
error CS1705: Assembly `gdk-sharp, Version=2.12.0.0, Culture=neutral, PublicKeyToken=35e10195dab3c99f' references `Mono.Cairo, Version=4.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756' which has a higher version number than imported assembly `Mono.Cairo, Version=2.0.0.0, Culture=neutral, PublicKeyToken=0738eb9f132ed756'
Compilation failed: 1 error(s), 0 warnings
Makefile:717: recipe for target '../build/Docky.Services.dll' failed
make[1]: *** [../build/Docky.Services.dll] Error 1
make[1]: Leaving directory '/home/venom/xfce/docky/stacks/src/stacks/Docky.Services'
Makefile:543: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
What is the cause of this and how can I fix it?
Thanks in advance!I think both docky and cairo-dock needs a compositing window manager...
Atleast cairo-dock has its own compositor. -
???? in Menu Bar after upgrading support packages
Hi All,
I have upgraded the support packages from Stack 16 to Stack 20 for my ECC 5.0
Every functionality is fine after the upgrade. But when our consultant tries to check the material in transaction MB52, in the next screen we see some ?????? in the menu items which is supposed to have some options in letters. The functionality is fine when we click on it knowing the option which is supposed to be there.
Assuming that it is the issue with the GUI, we have upgraded our GUI to 710 patch level 4 which is the latest available. Still no luck.
Can anyone help me with this. This is holding our upgrade on quality.
Points will be rewarded.
Thanks
VijayHi All,
I resolved this myself. We just need to get to the screen shere the ???? show up and go to SYSTEM >> STATUS
Under SAP Data, double click on GUI Status > STANDARD
Select the Application Toolbar and click on Activate.
This should solve the issue.
Thanks
Vijay -
Error message is 'The Request Error : 400' with SAP Download Manager
Hello,
The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
But I could not download below that file.
SAP_ABA 710 (4~8)
SAP_BASIS 710 (4~8)
PI_BASIS 2006_1_710 (4~8)
SAP_BW 710 (4~8)
Error message is 'The Request Error : 400' with SAP Download Manager
I logged on to SAP Service Marketplace, software download area /swdc.
I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
After I choose "Objects for Download", the system starts the download.
In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.Hello,
In these cases the following things should be checked:
1.- Please be sure that you are using the latest Donwload Manager version
2.- S-User and password should be active
3.- Specify the proxy. Please refer to SAP Note 155954
4.- It might be that you are not licensed for the product you want to download.
If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
1.- The exactly software product name and package or stack number you try to download.
2.- Attach to the message the results of the trace file generated as per note 574885:
574885 - Download Manager: Generate trace file for analysis
I hope this helps you.
Regards,
Blanca -
Solution Manager (SP 10) Maintanence Optimizer
Hi,
While configuring the Maintenance Optimizer, using the Activity "Activate Integration with Change Request Management" In the 1st activity list "Activate Change Request and Set - up Client by mistake i entered the wrong client id, and now it just doesnt let me change it.
Is there anyway that I can change it?
Also when I click on Maintanence Optimzer button, in Support Package and Stack Inbox I get the following error " Local logical system is not defined ". What does it mean? Is it because of the wrong client ID that i mentioned about above?
Any help on this will be much appriciated.
Thanks,
VikramTranscation SPRO
IMG Activity -> Sap Solution Manager -> Initial Configuration ->
Solution Manager - > General Configuration -> Maintain Logical Systems
Define Logical System
Add a unique ID and some name, then assign this logical system to the client you are using for Optimizer in the "Assign client to System.
I would suggest that you also do all the initial IMG activity step by step. -
DSWP error in Solution manager
Dear Sir,
I solution manager during DSWP Support Package and Stack Inbox
Display Systems by:
System: All with Leading Role
All
Main Instance: All
Software Component: All
Choose the filter button to activate the new filter settings
Maintenance Optimizer Maintenance Optimizer List
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
No Systems Found
How u solve this one
regardshI
You missed some of the SPRO activities still i guess,
In SPRO go to Scenario-Specific Settings-->Change Request Management -->Standard Configuration->Activate Integration with Change Request Management
After this check in SM30 that view BCOS_CUST has the following entries:
CHARM W NONE CUST620 1.0
CHARM_DEST W NONE CUST620 1.0
else you can manullay add the entries in sm30>Table/View->BCOS_CUST->Maintain>first column =CHARM_DEST, second =W, third=NONE, forth column =CUST620 , fifth Column 1.0
same as for the entries
CHRAM W NONE CUST620 1.0
OSS_MSG W SM_<SYSID>CLNT100_READ CUST620 1.0
and check the SAP-OSS and SAP-OSS-LIST-O01 connection also fine.
you can refer this blog [/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario|/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario]
Please check.
Jansi -
File to HTTP Mapping error in PI 7.1
Hi Team,
In my file to HTTP scenario- Im using file content conversion at source side . under MT , i have used Record node, under Record fileds. At target side I have used External definition. To generate multiple records , Im using 0...unbound occurance in External defination.
Example:
MT_SOURCE
-Record
--fileds
External_Definition
-fileds
After 0..unbound the structures looks like..
Source:
Message
-Messages1
--MT_SOURCE
---Record
fields
Target:
Messages
-Messages1
--ExternalDefinatuion
---fields
Now I record context to Messages1 from MT_SOURCE and mapped with Externl_Definition node. My reguirement is , For every record occurance the target structure should generate . I have changed the occurance in Interface mapping as 0..unbound. BUt when im testing with 2 Records , i got the below error...
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">ADAPTER_NOT_MMF</SAP:Code>
<SAP:P1>PLAINHTTP</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Adapter PLAINHTTP cannot process message packages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
If I used file adapter at receiver side , the messages are processing successfully , so mapping is correct . If I use HTTP im getting the error in MONI. Can anyone suggest whats the issue is ?
Cant we handle multiple records/messages in HTTP adapter.Hello,
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">ADAPTER_NOT_MMF</SAP:Code>
<SAP:P1>PLAINHTTP</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Adapter PLAINHTTP cannot process message packages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
If I used file adapter at receiver side , the messages are processing successfully , so mapping is correct . If I use HTTP im getting the error in MONI. Can anyone suggest whats the issue is ?
Cant we handle multiple records/messages in HTTP adapter.
Multi-mapping is not possible when you use Plain HTTP Adapter. You could use SOAP Receiver Adapter and check Do Not Use SOAP Envelope also make sure that your content-type is correct as checking this option changes the content-type to application/xml.
Hope this helps,
Mark -
SCORE(n) returning zero values in an outer join query
Hello all,
Is there any way to get a query that contains an outer join to return proper scores. I couldn't find out why this was happening in my query, but I'm getting a score values of 0 on most results.
Below are queries with result sets. As you can see the results that are scoring in the second query are scoring correctly, but only two have scores.
- - - Query 1, no outer join - - -
SELECT DISTINCT SCORE(0) AS scr,
file_repository.file_id,
file_repository.file_title
FROM file_repository
WHERE CONTAINS(index_url,'SYN(dui,a_thesaurus)', 0) > 0
ORDER BY scr ASC
SCR FILE_ID FILE_TITLE
7 136 Prisoners
7 240 Drug booklet
8 64 Communications
8 146 Rates
8 168 Vehicle Collisions
8 206 document4
14 207 document5
14 211 document5
15 74 Diplomatic Personnel
22 214 documentB
30 81 DUI and PCA Offences
- - - Query 2, with outer join - - -
SELECT DISTINCT SCORE(0) AS scr,
file_repository.file_id,
file_repository.file_title
FROM file_repository, file_security
WHERE CONTAINS(index_url,'SYN(dui,a_thesaurus)', 0) > 0
AND file_repository.file_id = file_security.file_id(+)
AND file_security.auth_id = 0
ORDER BY scr asc
SCR FILE_ID FILE_TITLE
0 74 Diplomatic Personnel
0 81 DUI and PCA Offences
0 136 Prisoners
0 146 Rates
0 168 Vehicle Collisions
0 206 document4
0 207 document5
0 214 documentB
0 240 Drug booklet
8 64 Communications
14 211 document5
This is on Oracle 9i using Oracle Text.
Thanks in advanceTo do this wouldn't you need to know the data in advance? The real source table had 1800 organisations and 8,000,000 transactions.
I Tried this as well, creating a pl/sql package as follows.
create or replace PACKAGE stack AS
TYPE gnt_push_numbers IS TABLE OF NUMBER INDEX BY PLS_INTEGER;
TYPE gvt_push_varchars IS TABLE OF VARCHAR(1000) INDEX BY PLS_INTEGER;
gna_push_numbers gnt_push_numbers;
gva_push_varchars gvt_push_varchars;
FUNCTION PUSH ( pn_push_var NUMBER, pn_offset NUMBER) RETURN NUMBER DETERMINISTIC;
FUNCTION PUSH ( pv_push_var VARCHAR, pn_offset NUMBER) RETURN VARCHAR DETERMINISTIC;
FUNCTION POP_NUM ( pn_offset NUMBER) RETURN NUMBER DETERMINISTIC;
FUNCTION POP_VAR ( pn_offset NUMBER) RETURN VARCHAR DETERMINISTIC;
END stack;
CREATE OR REPLACE
PACKAGE BODY "STACK" AS
FUNCTION push(pn_push_var NUMBER, pn_offset NUMBER) RETURN NUMBER deterministic IS
BEGIN
gna_push_numbers(pn_offset) := pn_push_var;
RETURN pn_push_var;
END push;
FUNCTION push(pv_push_var VARCHAR, pn_offset NUMBER) RETURN VARCHAR deterministic IS
BEGIN
gva_push_varchars(pn_offset) := pv_push_var;
RETURN pv_push_var;
END push;
FUNCTION pop_num(pn_offset NUMBER) RETURN NUMBER deterministic IS
BEGIN
RETURN gna_push_numbers(pn_offset);
END pop_num;
FUNCTION pop_var(pn_offset NUMBER) RETURN VARCHAR deterministic IS
BEGIN
RETURN gva_push_varchars(pn_offset);
END pop_var;
END stack;
Unfortunately it appears to act before the rows are sorted, so will only work in specialised circumstances, in that you have to ensure the rows have been sorted before the function is used.
SELECT PUSH(COL), POP..(COL)
FROM ( SELECT etc.
Luckily the client decided they didn't want to mix their graphs any more so a more classic approach using a base table select for actuals and then a date table select with a sub-query columns for the projection provided a simple solution. -
No System Found in Maintenance Optimizer
Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
AratiHi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati
Maybe you are looking for
-
Some advice and help with sound please
i have just upgraded! to premier elements 8. when i import a dvd all the sound plays when viewed on the preview but as soon as i drag it down to become the next clip everything is heard (background music, dogs barking chit chat etc) except the voices
-
Hi, I try to generate a sequence number as described in this thread: Re: Sequence Number in XI Mapping Unfortunately I allways got the error: [...] found : int required: java.lang.Integer Integer counter =0; What do I wrong with this example? Obvious
-
IPhoto frozen when syncing with MobileMe galleries
Hello all, I have about 30 MobileMe albums uploaded from iPhoto. I noticed that 3 seconds after i updated metadata (photo title, rating etc) of any photo in the online gallery, iPhoto freezes. I am very positive the freeze is caused by the fact that
-
UTF8, UTF-16 & Cloudscape
Hi everyone, I have a problem when I'm trying to store and retrieve Big5 chars into Cloudscape (which claims to support Unicode just the Java does). The following is the steps: 1. Prepare my Big5 chars 2. Run native2ascii -encoding UTF-16 (UTF8 gives
-
Create double-sided business cards
Good Day I am designing my Business Card in PS (although I know I should be doing it in Il, but not the point here). Now my business card has a back and front...In illustrator I would create two Artboards. What would I do in Photoshop? Do I extend th