Package Linked Smart Objects not available

Hello,
I have Photoshop CC on my pc and Windows 8.
File > Package is not available...
Can anybody help me!

It is missing from the menu. I tried to save the file as tiff or psd, but no Package...
I've attached a printscreen from the menu, the language is Dutch, I put an elipse on the smart object options.

Similar Messages

  • Urgent: Linked object not available

    We imported one role from one EP7 (DEV) into another EP7 (QAS).
    At target QAS PCD, we see the role has a path:
    pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/DEVCLIENT10/ROLE1.
    1) We changed above path to:
    pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/QASCLIENT10/ROLE1;
    2) We made sure EP7 QASCLIENT10 is connected to the backend well;
    3) the backend QAS/10 indeed has the role called ROLE1.
    But we still see on PCD, this imported role (ROLE1) has no any transaction. It shows a lot of "linked object not available".
    I remember a place to activate it but anyway cannot figure out.
    Please advise. Points guaranteed. Regards.

    Greg,
    I am quoting from SAP Help regarding the folder where the role uploaded objects should be stored.
    <i>The folder in which the objects are stored after the upload is defined in service com.sap.portal.pcd.rolemigration. The path portal_content/com.sap.portal.migrated/SAPComponentSystems/ is entered as default value. You can also define a different path in the service.
    The default folder can be found in the Portal Catalog under Portal Content -> Migrated Content -> SAPComponentSystems. You find further sub-folders that are created automatically with the upload below folder SAPComponentSystems. The objects uploaded from the backend systems are automatically sorted according to the following criteria in this folder: by the portal object type to which they are converted and by the logical system from which they are uploaded.</i>
    You can check what path you have in your portal under the service com.sap.portal.pcd.rolemigration from System Admin -> System Config -> Service Config -> Applications. There you should find the location where your objects should be stored.
    get the complete documentation <a href="http://help.sap.com/saphelp_nw04/helpdata/en/d1/95584035a0987ee10000000a1550b0/content.htm">Here</a>
    Regards,
    Shubhadip

  • Linked Smart Objects

    When you send a PS file which has a linked Smart Object to a print vendor, will you need to send the linked Smart Object file as well?

    That's what I was afraid of. As a print vendor AND a designer I'm concerned that word has not gotten out that linked objects will need to accompany the file and we will end up dead in the water when we need to open up a photoshop file with a linked smart object. This is a relatively new problem for Photoshop, although InDesign and even many Illustrator users know that links need to be sent. In fact, we're seeing the opposite trend in InDesign, where artists are embedding artwork in their InDesign file rather than linking, which has both pluses and minuses.
    Thanks!

  • Can you replace embedded smart object with linked smart object?

    Hi,
    I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
    TIA
    Jeff

    Hi,
    I'd like to update some document to reflet the new workflow that linked smart object provide. I have made some transformation on those embedded smart object and would like to not have to redo all those so is there anyway way to replace those SO with the linked version of the same SO?
    TIA
    Jeff

  • Convert an embedded smart object to a linked smart object

    Hey guys,
    love the new "linked smart object" functionality. However, I can not figure out how I can convert (or export) an existing embedded smart object to a linked smart object.
    I have a huge photoshop file with several embedded smart objects that I would like to break down into a lightweigt photoshop with with links to the varios smart object photoshop files.
    Is there any way to do this?
    Thanks,
    Philipp

    Thanks a lot guys.
    I am just now putting a document together with linked smart objects and I'm noticing that the file size of the PSD file still increases quite a bit. I thought the hole point of this was to have lightweigh psd files?
    I currently have 11 1920x1080 linked smart object files in the PSD and the file size is already at 140MB. Any ideas why this is happening?

  • How do I disable linked smart-object auto-update/refresh?

    Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
    How do I disable linked smart-object auto-update/refresh?

    If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
    You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
    Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
    I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature.  Where do you see your layer being saved?

  • Linked Smart Object:  Allowed File Type and Editor

    Please forgive my lack of knowledge.  I'm evaluating PS CC 2014, own PS 5.1 and am a hair shy of being a novice.  Presently I'm doing Photomerge Focus Stacking.  What I'm hoping is that DNG files can be Linked Smart Objects and that I can modify the merged photo by editing the DNG files in Adobe Camera Raw.  Is this possible?  The Adobe Help article has a rather cryptic "You can’t perform operations that alter pixel data", that leads me to believe no but, I don't understand that fully.
    Thanks.

    Currently you can not use any of the merge options: pano, hdr, or focus stacking with a smart object. So you would not be able to do that with dng files and retain the ability to edit them in Camera Raw. It would be nice though!

  • Linked Smart Object breaks a PSD after sync with Creative Cloud

    After using a linked Smart Object inside a PSD and sync with Creative Cloud, the online version of file does not preview and does not work with any online feature, like Extract, Layers, or Anything else.
    Any suggestion? Thanks in advance.

    Thanks for the example Deryck,
    The preview seemed broken on the comments tab but the image was appearing for me under the Extract one. When I downloaded the original it looked like the linking was preserved. The online version didn't seem to denote in any way that the Cecinas layer contained a Linked Smart Object, which might be helpful, but it did have the preview. Here are some screenshots of what I was seeing. Thanks for posting about it. I'll pass it on to our engineering department.

  • Linked Smart Objects from Photoshop CC

    Hi
    I have a Photoshop file which makes use of the new Linked Smart Objects (introduced in the last major CC update). If I create a Reflow Project out of this .PSD the Linked Smart Objects are not being converted.
    Am I doing something wrong or is it simply not implemented yet?
    Cheers

    If that's the case then keep the main grid container at 100% and then just add two boxes inside it. The outer one also stretch to 100% and have the inner one stop on column on either side and set the max-width on that. You could also just have the inner one strech to 100% with a max-width and have the underneath one show on the side only when it get really wide. I know it feels a little akward to use the grid like that, but we only have one container that the grid is on right now so this is what we can do. Here's an example using yellow for the outer container and red for the inner.
    Hope that helps and thanks again for using Reflow!
    Chris

  • PS CC 14.2: Linked Smart Objects workflow

    I like the idea of the Linked smart objects. Just a question about possible workflow.
    I work with large layered docs in the 2+GB range. It can get slow, particularly saving and opening.
    Idea 1) I use textures on seperate layers. Just by lining the PLACE My file size will be smaller. I'm guessing saving will be faster.
    Idea 2) Would it be possible. To work on a lower resolution "proxy" (example final version are images 10,000 x 10,000). Use all layers as SO, downsampled to 2k x 2k.
    Everything will be much faster. But all my changes (Blend modes, Opacity, Smart filters) are on the Proxy images.
    Now I want to generate my 10K version, could I swop out those 2k images in a folder for the High res?
    Have PS "update?"
    Maybe It would be required to change the image size to the 10K resolution, then update the Linked SO?
    I'm just thinking if this could be possible.
    Would save a ton of HD space, Make everything run quicker up until the final step.
    What do you guys think?
    Maxi
    Linked Smart Objects

    I've done a test.
    Swopping a high res for the low res image does work, but PS does not respect the scale. So the image comes in very large.But if I reveal all. I can get the full image to appear. And Smart Plug ins like NIK Analog Efex do rerender at the full res.

  • How do you update the location of linked smart objects?

    The new linked smart object feature was a low-key feature but it's fundamentally changing our workflow for the better!
    Quick question, is there a way to update the paths to linked smart objects or will Photoshop work it out? I can't see a links panel under WIndow or file so am not sure how you do it sorry.
    I'm about to edit these files at home and want to make sure Photoshop can find the links - as well as find everything when I copy it all back to the server and work.
    Cheers
    ben

    Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are.  SO can be embedded or linked to an outside file.  Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it.  otherwise it will update when you save the linked file.  Yes, there still is an advantage to having an embedded SO.  You may not want to maintain the links - send a file off and forget to include the linked files.  You may want to alter the SO, but not the original file.
    Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
    And if so,
    1. Can this linked file be either raster or vector?
    2. Do edits to it automatically update the Photoshop file?
    3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

  • Linked Smart Objects missing after last CC update?

    I had an update come across CC for Photoshop & Dreamweaver yesterday. After applying the update I'm finding that linked smart objects are missing from my File>Place menu. Anyone else having this issue? I had them before & now they are gone. CC shows me as having no updates available. Just checked Photoshop & it's showing I'm back at 14.0.

    Sounds like the updater failed and you are running 14.0.0 again.
    Uninstall and reinstall.

  • Open as linked smart object

    Hello,
    iam looking for a solution to open files in a folder
    and copy then into a document.
    Its working good, but i need the files to be linked smart object.
    Anyone knows a solution ?
    Here my Code so far:
    See in line 33. Convert to smart object: ?
    var file = new File('C:/User_MY PATH.PSD'),
    docRef = open(file);
    // Use the path to the application and append the samples folder
    var samplesFolder = Folder('C:/USERS_MY FOLDER');
    //Get all the files in the folder
    var fileList = samplesFolder.getFiles()
      // open each file
      for (var i = 0; i < fileList.length; i++)
      // The fileList is folders and files so open only files
      if (fileList[i]instanceof File)
      open(fileList[i])
      // use the document name for the layer name in the merged document
      var activeDocName = app.activeDocument.name;
      var targetDocName = activeDocName.substring(0, activeDocName.lastIndexOf("."));
      // Copy the Document
      app.activeDocument.selection.selectAll()
      //convertToSmartObject(); THIS ISNT WORKING - CONVERT IT ?
      app.activeDocument.selection.copy()
      // don’t save anything we did
      app.activeDocument.close(SaveOptions.DONOTSAVECHANGES)
      //Select specific layer to paste the copy, this is to make sure the layers are in a specific position
      var doc = app.activeDocument;
      doc.activeLayer = doc.artLayers.getByName("bgr");
      //Paste Document
      app.activeDocument.paste()
      app.activeDocument.activeLayer.name = targetDocName

    Use scriptlistener:
    var idPlc = charIDToTypeID( "Plc " );
        var desc2 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
        desc2.putPath( idnull, new File( "C:\\Photos\\myPhoto.psd" ) );
        var idLnkd = charIDToTypeID( "Lnkd" );
        desc2.putBoolean( idLnkd, true );
        var idFTcs = charIDToTypeID( "FTcs" );
        var idQCSt = charIDToTypeID( "QCSt" );
        var idQcsa = charIDToTypeID( "Qcsa" );
        desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
        var idOfst = charIDToTypeID( "Ofst" );
            var desc3 = new ActionDescriptor();
            var idHrzn = charIDToTypeID( "Hrzn" );
            var idPxl = charIDToTypeID( "#Pxl" );
            desc3.putUnitDouble( idHrzn, idPxl, 0.000000 );
            var idVrtc = charIDToTypeID( "Vrtc" );
            var idPxl = charIDToTypeID( "#Pxl" );
            desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
        var idOfst = charIDToTypeID( "Ofst" );
        desc2.putObject( idOfst, idOfst, desc3 );
    executeAction( idPlc, desc2, DialogModes.NO );

  • Layer Comps should capture changes to a Linked Smart Object's Layer Comp

    Normally, I can move things around or change visibility, and use Layer Comps in my master doc to capture these changes.
    However, changing which Layer Comp displays from a Linked Smart Object cannot be captured by Layer Comps in my master doc.
    Slightly more information: Sorry it's a little convoluted. I have several Linked Smart Objects inside a master doc, and these Smart Objects contain different Layer Comps. It's awesome that I can easily change which Layer Comp each Smart Object displays. But when I make a change, it cascades across the Layer Comps in my master doc. So my master doc's Layer Comps cannot effectively capture a state.
    It would be awesome if Layer Comps were able to capture state changes for the display of Linked Smart Object's Layer Comps. #featurerequest

    Photoshop Feature Requests should be posted over at
    Photoshop Family Customer Community
    But before posting one look around whether one exists already on this issue and add your +1 if it does.

  • Scripting layer comp property of linked smart object

    How can I through script set the layer comp property of a linked smart object?
    More generally, how can I access a smart object and manipulate it as a document?  I know that I get smart object layers by looking at the kind property, but I don't know what to do with them once I get them.  I'd like to be able to cast the layer to a document object I guess.  Thoughts, anyone?

    Photoshop Feature Requests should be posted over at
    Photoshop Family Customer Community
    But before posting one look around whether one exists already on this issue and add your +1 if it does.

Maybe you are looking for