Package missing in KM installation

I have installed EP6.0 on WAS6.4 and installed KM on it. I have also applied SP12 patch for both EP AND KM. The problem is when i visit content management in portal it does not shoe any images (like folder etc.). I tried to investigate the problem and found that the package <b>com.sap.km.cm.docs</b> from which it is fatching these images is missing. I reinstall the KM it did not solved the problem. Can anybody tell me from where i can get this package's .sdm file? or any other way to correct the problem.

Check the 'Root Directory' setting of the 'etc' repository; it must point to the 'etc' directory under 'global/config/cm'; for example, if your installation is under /usr/sap/FUN and the /sapmnt/FUN is the shared filesystem then the 'Root Directory' should be set to '/sapmnt/FUN/global/config/cm/etc'.

Similar Messages

Unneeded packages missing at Oracle 11gR2 installation on RHEL6.3 x86_64

Hi experts!!
I am getting a little bit puzzled when I am installing Oracle Database 11gR2 on my RHEL 6.3 server, which is x86_64.
I have read the installation doc (http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm) over and over again but I cannot get any clue to solve the problem I am facing: when I get to the 'Prerrequisite Checks' step at the installation, I get a message informing that I am missing some packages for i386, which shouldn't be necessary according to the documentation. The documentation says the next packages need to be installed for RHEL6 (all of them either for x86_64 or i686):
++The following or later version of packages for Oracle Linux 6, and Red Hat Enterprise Linux 6 must be installed:++
++binutils-2.20.51.0.2-5.11.el6 (x86_64)++
++compat-libcap1-1.10-1 (x86_64)++
++compat-libstdc++-33-3.2.3-69.el6 (x86_64)++
++compat-libstdc++-33-3.2.3-69.el6.i686++
++gcc-4.4.4-13.el6 (x86_64)++
++gcc-c++-4.4.4-13.el6 (x86_64)++
++glibc-2.12-1.7.el6 (i686)++
++glibc-2.12-1.7.el6 (x86_64)++
++glibc-devel-2.12-1.7.el6 (x86_64)++
++glibc-devel-2.12-1.7.el6.i686++
++ksh++
++libgcc-4.4.4-13.el6 (i686)++
++libgcc-4.4.4-13.el6 (x86_64)++
++libstdc++-4.4.4-13.el6 (x86_64)++
++libstdc++-4.4.4-13.el6.i686++
++libstdc++-devel-4.4.4-13.el6 (x86_64)++
++libstdc++-devel-4.4.4-13.el6.i686++
++libaio-0.3.107-10.el6 (x86_64)++
++libaio-0.3.107-10.el6.i686++
++libaio-devel-0.3.107-10.el6 (x86_64)++
++libaio-devel-0.3.107-10.el6.i686++
++make-3.81-19.el6++
++sysstat-9.0.4-11.el6 (x86_64)++
However, having a look at the installation log for the packages installed, the Oracle installation is missing some packages for i386, but these infraestructure is not required at all for RHEL6:
[root@localhost ~]# less /tmp/OraInstall2013-03-04_09-06-59PM/installActions2013-03-04_09-06-59PM.log| grep -i "is missing on node"
INFO: Error Message:PRVF-7532 : Package "libaio-0.3.105 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "compat-libstdc++-33-3.2.3 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "elfutils-libelf-devel-0.97" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "libaio-devel-0.3.105 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "libgcc-3.4.6 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "libstdc++-3.4.6 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "unixODBC-2.2.11 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "unixODBC-devel-2.2.11 (i386)" is missing on node "localhost"
INFO: Error Message:PRVF-7532 : Package "pdksh-5.2.14" is missing on node "localhost"
If I ignore this warnings, at the next step the Oracle installation stops with an error. I am a little bit lost about how to do to solve this. Is there anybody who has faced the same situation?
Thanks in advance and kind regards,
Guiller.

Hi Srini!
You are totally right. I have downloaded the following 11gR2 version:
11.2.0.1.0
However, having a look at the download page for Oracle databases, I guess that is the latest version I can find to download (if I don't have any kind of support with Oracle). Here it is the link I am using to download the software:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thank you very much and kind regards,
Guiller.

Build tools language resources - amd64 "packages missing" Installation stuck

I am installing the VS2015 Enterprise RC, the first installation went well, but after the second one, the installation pauses asking, package missing, download from internet or search in this address? I chose the internet one, and the installation has
never advanced ever since, the package that is missing is "build tools language resources - amd64", and it is still acquiring this package.
Tao Wang

Hi ,
Export location provided is not correct , make sure files exist as per requirement.
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP1' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not exist;
Import directory 'C:\Documents and Settings\belis\My Documents\NW7.02\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not exist.
Regards,

Package into a native installer fails on Linux (Flex SDK 4.5) : "Invalid AIR file"

Hi,
We've moved our application to compile against the 4.5 SDK.
We're compiling it with Flash Builder (on mac) into an air file and as our application is using NativeProcess API, we're packaging it on each platform into a native installer with the following command (linux example) : adt -package -target native app.deb app.air
We think we fall into the same issue ashttp://forums.adobe.com/message/3271944#3271944 but for the 4.5 DSK.
On Linux it used to work with the following environment (env1):
- Ubuntu 10.10
- Java Sun 1.6.0_24
- Flex SDK 4.1.0.16076 + Adobe Air SDK 2.5.0
It stops to work when we upgrade to the new Flex SDK (env2):
- Ubuntu 10.10
- Java Sun 1.6.0_24
- Flex SDK 4.5.0.20967 (with the default embeded Adobe Air SDK 2.6)
The faut message is "Invalid AIR file" and nothing is logged in the log file (/home/<username>/.appdata/Adobe/AIR/Logs/Install.log).
1) The .air file is installing correctly on env2 (without the support of the NativeProcess as expected)
2) We also tried to compile the project directly on env2 :
amxml app.mxml
adt -package -storetype pkcs12 -keystore cert.p12 app.air app-app.xml air.swf
The .air file is installing fine but the packaging into a native process fails in the same way...
3) We tried to package a native installer of our .air file on env1 and it works!!! (the installed application seems to work fine also on env2!!!)
Are we missing something or does it seems to be a bug of the Flex SDK 4.5?
Are there some restrictions to package a native installer with the Flex SDK 4.1 a air app build with the Flex SDK 4.5 ?
Thanks in advance,
Mich

Hi,
Finally we figure out how to solve the issue.
The packaging into native .deb installer fails as explain above because with the hole Flex SDK 4.5 (adt -version told 2.6.0.1920).
The packaging is successfull if only Air SDK 2.6 is install.
What is strange that both adt seems to be the same "2.6.0.1920" (found with "adt -version").
Can someone from the Adobe dev team explain it?
I suppose as the Flex SDK is not available for the Linux platform, the download only contains the Air SDK for Windows and Mac OS as opposed to the specific download of the Air SDK for te Linux platform...
Thanks,
Mich

Mini calendar in mail missing after Lion installation

mini calendar in mail missing after Lion installation

>After installing Lion (intel I-Mac 2g ram). My Microsoft Office 2004 no longer runs.
Upgrade to a Universal compatible version of Office or equivalent. http://www.neooffice.org/ is the least expensive alternative, though importing Entourage into iCal, Mac OS X Mail, and Addressbook works best if the data was exported from Entourage while still in Snow Leopard.
>Also, when I select "printer friendly" pages in Safari or Firefox, I get a "missing plugin" message.
When you upgraded, did you make sure that Safari was installed in the Applications folder? If not, you may have to redownload Safari from http://www.apple.com/safari/ as it happens to be the same version. Firefox double check is already Lion compatible. For more on upgrading to Lion, see my FAQ*:
http://www.macmaps.com/upgradefaq.html#LION

Do we need gcc compiler (prereq packages for linux) after installation?

Hi
Our data center folks want to remove any package that is not used at runtime. We told them that all the pre-req packages are needed during installation. Are they needed during the start/stop or run of OracleAS10g?
Thank you

Hi,
The compiler is also used for relinking during patching.
Regards,
Mathias

OEL-5 finally released but with many desktop packages missing

Hi,
OEL-5 GA has just been released but with many client (desktop) packages missing (as opposed to CENTOS-5 where all RHEL-5 categories are bundled into only one distribution). Namely, three months ago RHEL-5 has been released in three basic categories:
1. Red Hat Enterprise Linux Desktop
2. Red Hat Enterprise Linux
3. Red Hat Enterprise Linux Advanced Platform
The complete souce code for these distributions resides in two Red Hat ftp directories: "5Client" and "5Server" with different contents. It seems that OEL-5 GA includes only packages from "5Server" directory. So, many important applications are missing:
- openoffice.org
- kdepim (kmail, knode etc)
- thunderbird
- fribidi
- gaim
- k3b
etc.
I'm little confused, since it would be very stupid to have to download those packages from CENTOS-5 or self-compiling them from Red Hat source rpm download site.
N.J.

Thanks a lot Wim.
Yes I know, the problem didn't exist in RHEL-4/OEL-4, since AS was superset of ES, WS and Desktop. Unfortunatelly, It's not the case in version 5 where client version includes many packages that are missing in server version and vice versa. To avoid complications with new subscription channels, I would suggest the simplest and the most logical solution: all three categories BUNDLED in single distribution OEL-5 GA and only one subscription channel, just like CENTOS-5 (six CD ISOs).
Regards
N.J.

Missing the itunes installation file

i am missing the itunes installation file and thus can't uninstall old version or install new version - can someone help? thanks in advance

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cn=config missing in OUD installation

Hi,
I tried installing OUD on Windows 7 and on Suse Linux 11. However I find that cn=config is missing from their installations. I saw this link about possible bug, however even after provide appropriate permission, i do NOT see the issue getting resolved.
Any help is appreciated.
Known Issues - 11g Release 2 (11.1.2)
> ldapsearch -h localhost -p 1389 -D "cn=Directory Manager" -w password -b cn=config objectclass=*
# extended LDIF
# LDAPv3
# base <cn=config> with scope subtree
# filter: objectclass=*
# requesting: ALL
# search result
search: 2
result: 32 No such object
text: The entry cn=config specified as the search base does not exist in the
Directory Server
# numResponses: 1
Thanks, Pamela

Hi
The cn=config is visible from the admin port (default 4444), not from the regular ldap port (1389 in your case).
Try the same search (over SSL) to the admin port as directory admin. You will get the config
Regards,
-Sylvain

How to download packages (Required for 11gR2 Installation)?

Hello
I am not able to download mentioned packages (Required for 11gR2 Installation) Can you Provide link for the same?
SUNWbtool
SUNWhea
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs (ISO8859-1)
SUNWi15cs (ISO8859-15)
SUNWxwfnt
SUNWarc
SUNWcsl
Thanks,
Saurabh

Go examine your Solaris installation DVD.
The packages are there (and should have been installed with a default setup of your OS).

Cant install ITunes or Quick Time it says a file is missing that the installer package needs

Each time I try to install ITunes of Quick Time on my Windows XP machine with 2 gig of RAM and running service pack 3 it fails and says that a file the installer package needs is missing. How can I resolve this issue?

Your operating system is fine. No need to worry about that.
it fails and says that a file the installer package needs is missing.
What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

Packages missing from installation

New to the Oracle Unix 6...trying to install 11G R2. Getting list of missing packages (libaio 0.3105, glibc, elfutils, libgcc, unixODBC, pdksh)
. Where do I get them?

user7125967 wrote:
New to the Oracle Unix 6...trying to install 11G R2. Getting list of missing packages (libaio 0.3105, glibc, elfutils, libgcc, unixODBC, pdksh)
. Where do I get them?Either from the Installation DVD itself or from http://public-yum.oracle.com. In fact, if you installed Oracle Linux 6 Update 3, public-yum is already configured. Just run:
# yum install oracle-rdbms-server-11gR2-preinstallAnd all the pre-requisites will be installed for you automatically, including configuring sysctl.conf and limits.conf and creating the oracle users, etc.

BPC NW7 sp03 installation(packages missing)

Hi
WE are installing BPC7.0 NW sp03 as per installation guide. Successed in installing BPC admin client, office client.
But at BPC excel interface, i observed few options are disabled.
Eg: Under eData menu item many sub menu items are disabled(16 out of 19) as well for appset(appshell) and application(planning), when i chose to run data manage pakage, a dailog box comes with company folder, but no package groups and packages are exising. Not only for appset(appshell) and application(planning), but also i tried with custom appset & app combination also, i'm not viewing any package group & packages, what might be problem?
In backend(bw system), check system->status, for software component(CPMBPC), no support package is there? I know latest SP is sp08. Is datamager packages are not viewing, becoz of absence of support packages?
could anyone help for post installation activity?
thanks,

Any suggestions please..

Items are missing in self-installation kit

I ordered high speed internet (faster plan) yesterday. I chose combined modem and wireless router.
Today I just received the self-installation kit and I found out that several items are missing. The first one is the phone line filter and the second one is the CD.
The package only contains a modem, phone line, cable line, power cord, user guide, and quick uide. That is it.
I want to know what else is missing in my package?
Thank You in advance.

Ok.
#1 Try going to https://activate.verizon.net/launch/welcome
#2 Folllow the directions there.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

IC Elimination Package Missing

Hi All,
I realized, that IC Elim pacakage is missing and not SAP BPC System - MS Version 7.5 SP 1.03 & 1.06, even tried by organize package list can find examples and system, where do I find them ? Do I need to create them ? If yes - what are the steps ?
I noticed some files are having extension (.dtsx) - how are these created ? Can we create one's like these
Please advise
Zan

Hi Zan,
if you don't find it in your ...\Webfolders\<appset>\<application>\DATAMANAGER\PACKAGEFILES\SYSTEM FILES, you can found the IC Eliminations.dtsx file in the SAP_IFRS. It's not inside the standard installation of 7.5 but you can download it from the SAP download just search SAP BPC IFRS.
You'll found the documentation for "Starter Kit for IFRS" here
https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000726400&_SCENARIO=01100035870000000202&
after the installation you will found the IC Eliminations.dtsx file
<server name>\osoft\Webfolders\SAP_IFRS\CONSOLIDATION\DATAMANAGER\PACKAGEFILES\SYSTEM FILES
Kind regards
Roberto

Package missing in KM installation

Similar Messages

Maybe you are looking for