Package Run Prompts For Connection Information

I've just loaded up Version 1.5.0.53 (my first version of 1.5), and I observed that when I try to run or debug a package, I'm prompted for connection information. The package works fine when I fill in the credentials. Is this expected behavior?
I believe that it is different than previous versions, where it seems like the open connection was shared. I can't find a setting in Preferences that seems appropriate for this.

No, I don't like to save my password...
But even as I type this, I realize what my problem is. The behavior is working as designed, it's just that for earlier connections to my development environment, I did have passwords saved. I mistook the change in behavior as a change in the tool, when it also coincided with a change in my focus towards my QA environment.
Thanks for help getting me past PEBKAC.

Similar Messages

Payment made for lightroom and photoshop joint package, still prompted for serial number

payment made for lightroom and photoshop joint package, still prompted for serial number which I have not been given. what do i do next?

Hi ,
I think you have downloaded the program directly from adobe. As you have the Photography plan, then you have to download this from Creative Cloud Desktop then they will be activated through with your email address. Then it will not ask for serial number.

Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?

Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?
Notes: The RSS feed of the podcast works just fine. When I enter the podcast URL into the firefox bar, I am prompted and am able to access the page. The problem is with iTunes not giving me the prompt.

Mountain Lion Supported Machines
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Requirements
General Requirements
OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.

Exchange Management Shell prompt for connection credentials?

Some time ago I came across an article where a couple of modifications to the shortcut to the EMS would allow a connection to a specific server and then prompt for credentials for that connection.
Removing the -auto and replacing with -serverFQDN [servername] covers the 1st part, but I can't recall what allowed the prompt for credentials to the other machine.
I'm looking do do this from a Win7 machine, where I must login with one account but another account has Exchange permissions.
It's driving me nuts, because I had it working and lost the shortcut in a machine reload and can't recall what I had done.

Slightly modified, but nothing important was removed.
C:\Users\[loginid]>C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -ver sion 2.0 -noexit -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin \RemoteExchange.ps1'; Connect-ExchangeServer -ServerFQDN [servername] -Credential (Get-Credential)"
         Welcome to the Exchange Management Shell!
<tip snipped>
cmdlet Get-Credential at command pipeline position 1 Supply values for the following parameters:
Credential
VERBOSE: Connecting to [servername]
[servername] Connecting to remote server failed with the following error message : Access is denied. For more informati on, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
Doing a New-PSSessoin using the same credentials is successful.
$UserCredential = Get-Credential
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
http://[servername]/PowerShell/ -Authentication Kerberos -Credential $UserCredential import-pssession $Session
cmdlet Get-Credential at command pipeline position 1 Supply values for the following parameters:
Credential
WARNING: Some imported command names include unapproved verbs which might make them less discoverable.
Use the Verbose parameter for more detail or type Get-Verb to see the list of approved verbs.
ModuleType Name
ExportedCommands
Script     tmp_e9ed0738-3c62-458b-bdc8-7451...
PS C:\
Using CAC login, or domain/username/password produces the same results.

IPhone does not give me "username" prompt for connecting to WiFi, only pass

When connecting with my computer, I get a user name and password prompt, but with my iPhone, it only asks for a password and won't log in. What am I supposed to do to get the iPhone to input my user name?

this is pleasant.
im at school and they use WPA enterprise.
ive had this phone for almost 4 hours and i am VERY dissappointed. and i got it after the $200 price drop. Got my first apple computer when i was 8, been using them since i was 4, so this lack of completeness is very traumatic after a long line of flawless apple products.
almost no customization.
of course no wpa authentication for wifi.
cant add tasks in the calendar on my iphone.
cant seem to find how to turn the backlight on for longer, so when im in a voice menu and have to push buttons, i cant see what im pressing cause the screen shut off.
and this is day one.
apple. you have ALOT of work to do.

After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it. Maybe client integration or authentication settings? I have looked at it in wireshark
and have not seen anything glaring.
Steps to reproduce the (working) behavior:
Set up a document library in SharePoint 2010.
Under versioning settings, make the following changes:
Set Require Content Approval for submitted Items to Yes
Select Create Major and Minor (draft) versions
Set require checkout to Yes
Create an out of the box “approval” workflow with the following settings:
Start this workflow to approve publishing a major version of an item.
I then create a new document. Save it. check it in. it is now version 0.1.
I then open it again. check it out. Make a change. Close and save it.
Check it in.
Publish major version:
At this point a screen is presented to me to enter workflow parameters. This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
This is what I need help with. It should come up in 2010. To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port. I did this for 2010 and it did not work.
Any help or ideas is very appreciated. Thanks very much in advance.

Hi Chris,
According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Connection information for Deployment Manager

Happy Friday to all
Environment:
OWB 10g Client on Windows XP Professional
Repository - 9.2.0.4 on UNIX (AIX 5.2)
Runtime (1) - 9.2.0.4 on UNIX (AIX 5.2)
Runtime (2) - 9.2.0.4 on UNIX (AIX 5.2)
Target - 9.2.0.4 on UNIX (AIX 5.2)
I'm having a 'little' trouble getting my 2nd deployment location to work.
1- When I first connect to the Runtime through Deployment Manager I am prompted for 'Connect As User' and its password. What user is it looking for?
a) Runtime User (rtu)
b) Runtime Repository Owner (rtr)
c) Some UNIX user
d) Some other Oracle database user
2- When I'm trying to Register a location I am prompted for a Schema Name, Password and Service Name. What schema name does this refer to?
a) Runtime user (rtu)
b) Runtime Repository Owner (rtr)
c) Target schema
3- I was able to deploy a directory and an external table to the second runtime environment. However, when I try to deploy a mapping I get the following error:
RPE-01012: Cannot deploy to the target location because it is owned by a different runtime platform.
Where is the conflict? I have connected to the correct Runtime environment via the Deployment Manager but maybe I'm using the wrong connection information as described above.
This whole connection 'thing' is very confusing and the documentation is pretty weak in that area.
Any assistance is greatly appreciated.
Thanks for all the effort in supporting this site. It is very very useful!
Gary

Salman
Thanks for the quick response.
In my case I have the same schema (location) acting as a source and target. It is not my primary target but nonetheless I have the need to truncate and insert into tables in that schema.
Do I need to set up two (2) different locations because I use the same one for both a source and target???
I use my primary location for both a source and target in other mappings so I don't see that there's a difference.
What, exactly, is the error message I'm getting (RPE-01012 : Cannot deploy to the target location because it is owned by a different runtime platform.) telling me?
Who is it that 'owns' the runtime platform?
I only have one (1) runtime platform on that server although I do have my primary runtime platform on another server. Both runtime environments use the same schema name (OWB_RTR in my case), they have different target schemas and are on different servers.
I don't understand where the confusion is except in my own mind! ;-)>
Many thanks for the assistance.
Gary

Ipod touch prompting me for security information required then asking me to fill in 3 questions and answers but will bump me out of it and will not allow me to download app, help

Jusat the other day i started getting prompted for Security Information required when trying to download apps. on my Ipodtouvh 4Gen. Typically when I download an app. I get asked for my apple ID and then it will allow the download. This new prompt pops up after it looks like the app is downloading. It gives me the option to cancel which will not allow the download or I have to select Security information. It then brings me to a screen where it asked for three questions but as I put the questions and answers in it bumps me back to the screen of the app I was trying to doenload. Any clues???

this has recently been happening to other people. We think that it is a fault at apples end of the line. However in the cases i have seen the problem fixes itself and it goes back to normal after a day or 2 you just have to wait!

CrystalReports prompting for database details

Hello all,
I am posting this issue for the second time.. In my previous post, I didn't get a solution.
For some reason a few of the reports that we run are prompting for database information for no apparent reason. I have provided a screen shot of what the behavior looks like. Can you please let me know if you have any ideas on what might be causing this? I have written a number of reports with the same use but for some reason only a few behave in this way.
Any ideas you may have would be helpful.
[Crystal Report DB Login screen|http://img214.imageshack.us/img214/7665/image006cy.jpg]
Thanks in advance
Anoop

Hi..
I am using CrystalRepots 12.2 in my machines and .NET Framework 2.0.
I am using vb.net 2005 for developing applications.
I am using SQL 2005 Database.
Connection using is ADO.NET
Here is the database login source code. Please check it.
<pre>
            Dim c As ConnectionInfo
            Dim crDB As Database
            Dim crTables As Tables
            Dim crTable As Table
            Dim TblLogonInfo As TableLogOnInfo
            Dim crSections As Sections
            Dim crSection As Section
            Dim crReportObjects As ReportObjects
            Dim crReportObject As ReportObject
            Dim crSubreportObject As SubreportObject
            Dim subRepDoc As New ReportDocument
            Dim ServerName As String, DatabaseName As String
                Me.rptDoc.Load(sCRPath, OpenReportMethod.OpenReportByTempCopy)
                ServerName = ActiveCompanyServer
                DatabaseName = ActiveCompanyDB
                c = New ConnectionInfo
                'Set Conenction info for DB
                With c
                    .ServerName = ServerName
                    .DatabaseName = DatabaseName
                    .UserID = "sa"
                    .Password = SAPsaPwd
                End With
                'Associate DB to the report
                crDB = Me.rptDoc.Database
                'Instantiate Tables collection
                crTables = crDB.Tables
                'Loop thru tables in report and set connection information
                For Each crTable In Me.rptDoc.Database.Tables
                    TblLogonInfo = crTable.LogOnInfo
                    TblLogonInfo.ConnectionInfo = c
                    crTable.ApplyLogOnInfo(TblLogonInfo)
                    crTable.Location = c.DatabaseName & ".dbo." & _
                             crTable.Location.Substring(crTable.Location.LastIndexOf(".") + 1)
                Next
                'Set the sections collection with report sections
                crSections = Me.rptDoc.ReportDefinition.Sections
                'Loop through each section and find all the report objects
                'Loop through all the report objects to find all subreport objects, then set the
                'logoninfo to the subreport
                For Each crSection In crSections
                    crReportObjects = crSection.ReportObjects
                    For Each crReportObject In crReportObjects
                        If crReportObject.Kind = ReportObjectKind.SubreportObject Then
                            'If you find a subreport, typecast the reportobject to a subreport object
                            crSubreportObject = CType(crReportObject, SubreportObject)
                            'Open the subreport
                            subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
                            crDB = subRepDoc.Database
                            crTables = crDB.Tables
                            'Loop through each table and set the connection info
                            'Pass the connection info to the logoninfo object then apply the
                            'logoninfo to the subreport
                            For Each crTable In crTables
                                With c
                                    .ServerName = ServerName
                                    .DatabaseName = DatabaseName
                                    .UserID = "sa"
                                    .Password = SAPsaPwd
                                End With
                                TblLogonInfo = crTable.LogOnInfo
                                TblLogonInfo.ConnectionInfo = c
                                crTable.ApplyLogOnInfo(TblLogonInfo)
                                crTable.Location = c.DatabaseName & ".dbo." & crTable.Location.Substring(crTable.Location.LastIndexOf(".") + 1)
                            Next
                        End If
                    Next
                Next
</pre>
I had been using the same code from the year 2005(last 5 years). But didn't see this error before.
Also i am getting this error only for 2 or 3 reports.
I guess the issue is with the crystal report design.
Any way please help me.
Thank you
Anoop

Does Firefox facilitate my filling out of online forms when the form asks for standard information such as name, address, email, phone number. I just switched over from Goole Chrome which had this feature.

Google Chrome would offer dropdown prompts for this information as I started entering the information. I would simply highlight the correct prompt and hit enter and the information would be entered throughout the online form.

See:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.com/kb/Form+autocomplete
*Autofill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/
*http://autofillforms.mozdev.org/drupal/content/main-page

Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.com

Hi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support

SSH - Failure to connect, does not prompt for password,

I have been using SSH on this iMac with 10.5.4 for over a year, upgraded to Leopard when it came out, never a problem with SSH, but now for no apparent reason, SSH fails when trying to connect through VPN into work.
I can still connect to other systems on the internet that are not through the VPN.
I don't suspect this to be a VPN issue because no other employees are having this problem with the VPN, using Mac, Windows or Linux. I can connect vi putty on my windows from the same network... below is my config.
Here is what I'm getting:
I connect as- ssh me@hostname and it returns "Permission denied (publickey)." It makes to attempt to prompt me for a password. I do not use a key on this system so it should prompt me for a password. I changed nothing on the system to cause ssh to break, But it's possible that a apple security update caused something to break.
I have added the following to my ~/.ssh/config file
PasswordAuthentication yes
My /etc/ssh_config file is as follows:
cat /etc/ssh_config
# $OpenBSD: ssh_config,v 1.22 2006/05/29 12:56:33 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
PermitLocalCommand yes
My /etc/sshd_config is:
cat /etc/sshd_config
# $OpenBSD: sshd_config,v 1.72 2005/07/25 11:59:40 markus Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/sshhostkey
# HostKeys for protocol version 2
#HostKey /etc/sshhost_rsakey
#HostKey /etc/sshhost_dsakey
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/sshknownhosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# SACL options
#SACLSupport yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange yes
# GSSAPI options
#GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server

Also I forgot to mention, I have nulled out the known_hosts file to eliminate any conflicts there, I have verified .ssh is 700 and files config and known_hosts are 600
output using ssh -v
debug1: Reading configuration data /Users/<me>/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to pshx4105a [216.255.177.213] port 22.
debug1: Connection established.
debug1: identity file /Users/<me>/.ssh/identity type -1
debug1: identity file /Users/<me>/.ssh/id_rsa type -1
debug1: identity file /Users/<me>/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5p1 FreeBSD-20061110
debug1: match: OpenSSH_4.5p1 FreeBSD-20061110 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host 'pshx4105a' is known and matches the DSA host key.
debug1: Found key in /Users/<me>/.ssh/known_hosts:3
debug1: sshdssverify: signature correct
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug1: SSH2MSG_SERVICEACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/<me>/.ssh/identity
debug1: Trying private key: /Users/<me>/.ssh/id_rsa
debug1: Trying private key: /Users/<me>/.ssh/id_dsa
debug1: No more authentication methods to try.

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Run report with SSO/OAM by URL without prompt for uid/pwd?

Can I run a report by URL to a report engine protected by SSO/OAM without being prompted for credentials? Asking the same in another way, is there a way to pass the SSO/OAM credentials in the URL (or otherwise) to avoid being prompted for them? I find many references to how to do this for the database connection credentials, but I'm trying to pass the SSO/OAM credentials on the URL. My end game is to be able to run a report from VB.NET from a kiosk application in VB.NET where there is no attendant and client does not want to have to log into SSO/OAM at any time. My VB.NET code will submit the URL, grab the output and manage the work stream (print, save, store to doc repos, etc.) in the kiosk code.
Thanks in advance
Hank
12/29/2014
For the sake of those that come later with this same question:
It turns out there is a way to do this after all. I opened an SR with MOS and with a little trial and error we worked out that the following does work:
http://<theFormsReportsServer>:9002/reports/rwservlet?report=myTestReport.rdf&authid=myOAMUserId/mySSOPasswd&userid=dbUid/dbPwdK@DbTnsEntryName&destype=cache&desformat=html
Note that there are two necessary bits to this in addition to specifying the authid=SSO Credentials part. The first is that you must use the WLS_REPORTS port (9002 in our case), not the OHS port (8888 in our case). The other is that you must provide the database connection. I have done it overtly in this syntax by specifying userid=DbCredentials@Db, but it should also work to substitute the ssoconn functionality in order to hide the Db credentials. That is not an issue in our environment so i have not actually tested it.
Regards
Hank

Hi;
It's been too long since I've done anything in Access. Have a look at this old sample, and see if it helps:
https://smpdl.sap-ag.de/~sapidp/012002523100006013432008E/rdc_vba.exe
Regards,
Jonathan

Problem in using context param for storing database connection information

Hello Friends,
I am new to struts & jsp.I am developing a project in struts.I have 1 jsp page called editProfile.jsp.On submitting this page it will call 1 action class.The action class in turn will call the Plain old java class where I have written the logic for updating User Profile.
I have created context-param in web.xml for database connection information like dbURL , dbUserName , dbPassword , jdbcDriver.Now I want to use these connection information in my Business logic(Plain Old Java Class).As we can use context parameter only in jsp & servlets , I am setting the variables of my business logic class with these context param in jsp itself.
now when I am calling the updateProfile method of Business logic class from Action class it is giving error as all the connection variables which I set in jsp for my business logic class has become null again.
I am not getting.If once I have set those variables how come they are becoming null again???Please help me.Any Help will be highly appreciated.Thanx in advance.

This is the code I have written
web.xml file
<context-param>
<param-name>jdbcDriver</param-name>
<param-value>oracle.jdbc.driver.OracleDriver</param-value>
</context-param>
<context-param>
<param-name>dbUrl</param-name>
<param-value>jdbc:oracle:thin:@localhost:1521:gd</param-value>
</context-param>
<context-param>
<param-name>dbUserName</param-name>
<param-value>system</param-value>
</context-param>
<context-param>
<param-name>dbPassword</param-name>
<param-value>password</param-value>
</context-param>
EditProfile.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@ page import="java.sql.*" %>
<jsp:useBean id="EditProfile" scope="application"
class="com.myapp.struts.EditProfile"/>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Edit My Profile</title>
</head>
<body>
<form action="submitEditProfileForm.do" focus="txt_FirstName" method="post">
<%
EditProfile.setjdbcDriver(application.getInitParameter("jdbcDriver"));
EditProfile.setdbURL(application.getInitParameter("dbURL"));
EditProfile.setdbUserName(application.getInitParameter("dbUserName"));
EditProfile.setdbPassword(application.getInitParameter("dbPassword"));
-----------more code goes here------------
EditActionProfile.java
package com.myapp.struts;
import javax.servlet.jsp.jstl.core.Config;
import org.apache.struts.action.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
public class EditProfileAction extends Action {
public EditProfileAction()
public ActionForward execute(
ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response) throws Exception
try
if (isCancelled(request))
return mapping.findForward("mainpage");
EditProfileForm epf = (EditProfileForm)form;
EditProfile ep = new EditProfile();
String temp = ep.updateProfile(epf.getTxt_FirstName(),epf.getTxt_MiddleName() , epf.getTxt_LastName() , epf.getTxt_Address() , epf.getTxt_Email() );
if(temp.equals("SUCCESS"))
return mapping.findForward("success");
else
return mapping.findForward("failure");
catch(SQLException e)
System.out.println("error" + e.getMessage());
return mapping.findForward("failure");
EditProfile.java class (My Business Logic Class)
package com.myapp.struts;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.sql.Statement;
import java.sql.*;
public class EditProfile {
private String dbURL;
private String dbUserName , jdbcDriver;
private String dbPassword;
private Connection con;
private Statement stmt;
public EditProfile()
public void setdbURL(String s )
this.dbURL = s;
public void setdbUserName(String s )
this.dbUserName = s;
public void setdbPassword(String s )
this.dbPassword = s;
public void setjdbcDriver(String s )
this.jdbcDriver = s;
public String updateProfile(String firstname , String middlename , String lastname , String address , String email)
throws SQLException, ClassNotFoundException , java.lang.InstantiationException , IllegalAccessException
try
String s1 = new String("update usr set first_name='" + firstname + "' , middle_name='" + middlename + "' , last_name='" + lastname +"' , address='" + address + "' , email_id='" + email + "' where usr_key=1" );
con = this.init();
System.out.println("after init");
stmt = con.createStatement();
int rslt = stmt.executeUpdate(s1);
System.out.println("after excute update");
stmt.close();
if(rslt>=1)
return "SUCCESS";
else
return "Failure";
finally
if (null != con)
con.close();
public Connection init() throws SQLException, ClassNotFoundException
Class.forName(jdbcDriver);
con = DriverManager.getConnection(dbURL, dbUserName, dbPassword);
return con;
public void close(Connection connection) throws SQLException
if (!connection.isClosed())
connection.close();
}

Package Run Prompts For Connection Information

Similar Messages

Maybe you are looking for