Package that install binary into /opt not available directly
Recently reinstalled the system. But when I install packages, I found out all those installing binary to /opt doesn't get a sym link into /usr/bin. So after the installation, the program is actually not available. E.g. xfce. Is this meant to be or a bug?
u kould file a bug report, to get ur concerns noticed at least, but i would rekommend symlinking to them .... a simple addtion to the $PATH would suffice...
Similar Messages
-
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!
If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
to opt for that.
Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Binary images description not available
I scanned some pages from a book on my Epson scanner which converted them to jpg files. I then tried to import those images into iPhoto to clean up the edges but it won't import. Every time the program crashes. I've restarted and repaired permissions. Below are the problem details that are sent to Apple. What stood out in my eye was the phrase, "Binary images description not available".
Could someone tell me why this is happening and what I might be able to do to fix it.
Cheers,
sws
Process: iPhoto [194]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [127]
Interval Since Last Report: 2388 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 2068 sec
Per-App Crashes Since Last Report: 3
Date/Time: 2009-09-16 15:17:13.819 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 60AE4FE7-3128-40A8-9A04-DEF7D0037A59
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000018c11b8
Crashed Thread: Unknown
Error Formulating Crash Report:
Called memoryAtAddress: 0x1000, which is in an unmappable portion of [0x0 -> 0xffffffffffffffff] in PID# 194.
0x934bffeb
0x94a0de3b
0x00096e60
0x00090a67
0x00090174
0x000900df
0x000a57aa
0x000a54be
0x000a0b52
0x000038f5
0x0000a992
0x00002ea4
0x000029f1
0x94e9d03b
0x0000c254
0x94e71155
0x94e71012
Backtrace not available
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x2131fe00 ebx: 0x00000000 ecx: 0x2132093c edx: 0x018c11b8
edi: 0xa0100c20 esi: 0x16aa0604 ebp: 0xb0926168 esp: 0xb09260d0
ss: 0x0000001f efl: 0x00010246 eip: 0x9083a834 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x018c11b8
Binary images description not availableSame problem under both the administrators account and the new one.
Under the System Configuration tab on the Problem Report this is what it says
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.21)
Bluetooth: Version 2.1.8f2, 2 service, 0 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, (null) mA
USB Device: USB2.0 Hub, (null) mA
USB Device: BUFFALO INC. USB-SATA Bridge, (null) mA
USB Device: BUFFALO INC. USB-SATA Bridge, (null) mA
USB Device: LHD USB Device, (null) mA
USB Device: USB-SATA Bridge, (null) mA
USB Device: USB2.0 Hub, (null) mA
USB Device: GV-MACTV, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: USB MFP, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
the Problem Detailas are as follows
Process: iPhoto [1940]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [127]
Interval Since Last Report: 35054 sec
Crashes Since Last Report: 12
Per-App Interval Since Last Report: 350 sec
Per-App Crashes Since Last Report: 12
Date/Time: 2009-09-17 01:11:33.032 +0900
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 60AE4FE7-3128-40A8-9A04-DEF7D0037A59
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000018a100c
Crashed Thread: 31
Thread 0:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x954db2ac 0 + 2504897196
5 ??? 0x954db0c5 0 + 2504896709
6 ??? 0x954daf39 0 + 2504896313
7 ??? 0x93f076d5 0 + 2482009813
8 ??? 0x93f06f88 0 + 2482007944
9 ??? 0x93efff9f 0 + 2481979295
10 ??? 0x93ecd1d8 0 + 2481770968
11 ??? 0x00123e6a 0 + 1195626
12 ??? 0x0000354e 0 + 13646
Thread 1:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x01362201 0 + 20324865
7 ??? 0x01350363 0 + 20251491
8 ??? 0x9132adfd 0 + 2436017661
9 ??? 0x9132a9a4 0 + 2436016548
10 ??? 0x94e71155 0 + 2498171221
11 ??? 0x94e71012 0 + 2498170898
Thread 2:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x01362201 0 + 20324865
7 ??? 0x01350363 0 + 20251491
8 ??? 0x9132adfd 0 + 2436017661
9 ??? 0x9132a9a4 0 + 2436016548
10 ??? 0x94e71155 0 + 2498171221
11 ??? 0x94e71012 0 + 2498170898
Thread 3:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x9135f3d5 0 + 2436232149
5 ??? 0x013518a5 0 + 20256933
6 ??? 0x9132adfd 0 + 2436017661
7 ??? 0x9132a9a4 0 + 2436016548
8 ??? 0x94e71155 0 + 2498171221
9 ??? 0x94e71012 0 + 2498170898
Thread 4:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x00505a15 0 + 5265941
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 5:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x96698264 0 + 2523497060
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 6:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91372932 0 + 2436311346
3 ??? 0x005115ae 0 + 5313966
4 ??? 0x00510dcc 0 + 5311948
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 7:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91372932 0 + 2436311346
3 ??? 0x005115ae 0 + 5313966
4 ??? 0x00510dcc 0 + 5311948
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 8:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x91370dbc 0 + 2436304316
4 ??? 0x91370bd0 0 + 2436303824
5 ??? 0x91370b35 0 + 2436303669
6 ??? 0x006c4132 0 + 7094578
7 ??? 0x0069f0f4 0 + 6942964
8 ??? 0x006c0953 0 + 7080275
9 ??? 0x9132adfd 0 + 2436017661
10 ??? 0x9132a9a4 0 + 2436016548
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 9:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962a4b76 0 + 2519354230
5 ??? 0x906d5aa2 0 + 2423085730
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 10:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962a4b76 0 + 2519354230
5 ??? 0x962cd1d8 0 + 2519519704
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 11:
0 ??? 0x94e8f6fa 0 + 2498295546
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 12:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x91691a09 0 + 2439584265
3 ??? 0x94e71155 0 + 2498171221
4 ??? 0x94e71012 0 + 2498170898
Thread 13:
0 ??? 0x94e402ce 0 + 2497970894
1 ??? 0x94e722c6 0 + 2498175686
2 ??? 0x94eb7539 0 + 2498458937
3 ??? 0x90849ed7 0 + 2424610519
4 ??? 0x94e71155 0 + 2498171221
5 ??? 0x94e71012 0 + 2498170898
Thread 14:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446aa8 0 + 2470734504
4 ??? 0x9138e520 0 + 2436424992
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 15:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92222e17 0 + 2451713559
5 ??? 0x962c4057 0 + 2519482455
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 16:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92222f90 0 + 2451713936
5 ??? 0x962c4057 0 + 2519482455
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 17:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x962c5e83 0 + 2519490179
3 ??? 0x962a4d6a 0 + 2519354730
4 ??? 0x962c5b00 0 + 2519489280
5 ??? 0x9222df72 0 + 2451758962
6 ??? 0x962c4057 0 + 2519482455
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 18:
0 ??? 0x94e402e6 0 + 2497970918
1 ??? 0x94e722af 0 + 2498175663
2 ??? 0x94e73b33 0 + 2498181939
3 ??? 0x962a4d96 0 + 2519354774
4 ??? 0x962c5b00 0 + 2519489280
5 ??? 0x9222febc 0 + 2451766972
6 ??? 0x962c4057 0 + 2519482455
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 19:
0 ??? 0x94e709c6 0 + 2498169286
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 20:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e47236 0 + 2497999414
2 ??? 0x93f6dbf1 0 + 2482428913
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 21:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x00505a15 0 + 5265941
3 ??? 0x9132adfd 0 + 2436017661
4 ??? 0x9132a9a4 0 + 2436016548
5 ??? 0x94e71155 0 + 2498171221
6 ??? 0x94e71012 0 + 2498170898
Thread 22:
0 ??? 0x94e821fa 0 + 2498241018
1 ??? 0x931837b5 0 + 2467837877
2 ??? 0x94e7837f 0 + 2498200447
3 ??? 0x94e78325 0 + 2498200357
4 ??? 0x94e7d3bd 0 + 2498220989
5 ??? 0x9319208d 0 + 2467897485
6 ??? 0x93194d00 0 + 2467908864
7 ??? 0x9319576c 0 + 2467911532
8 ??? 0x00518341 0 + 5342017
9 ??? 0x005188c4 0 + 5343428
10 ??? 0x0051a36f 0 + 5350255
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 23:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x94e64ce9 0 + 2498120937
3 ??? 0x9134b453 0 + 2436150355
4 ??? 0x00513eb9 0 + 5324473
5 ??? 0x0051244c 0 + 5317708
6 ??? 0x00519378 0 + 5346168
7 ??? 0x0051a36f 0 + 5350255
8 ??? 0x94e71155 0 + 2498171221
9 ??? 0x94e71012 0 + 2498170898
Thread 24:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 25:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 26:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 27:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 28:
0 ??? 0x94e4746e 0 + 2497999982
1 ??? 0x94e71dcd 0 + 2498174413
2 ??? 0x0051ab92 0 + 5352338
3 ??? 0x00518303 0 + 5341955
4 ??? 0x005188c4 0 + 5343428
5 ??? 0x0051a36f 0 + 5350255
6 ??? 0x94e71155 0 + 2498171221
7 ??? 0x94e71012 0 + 2498170898
Thread 29:
0 ??? 0x94e40286 0 + 2497970822
1 ??? 0x94e47a7c 0 + 2498001532
2 ??? 0x93445e7e 0 + 2470731390
3 ??? 0x93446b04 0 + 2470734596
4 ??? 0x92b735cd 0 + 2461480397
5 ??? 0x9132adfd 0 + 2436017661
6 ??? 0x9132a9a4 0 + 2436016548
7 ??? 0x94e71155 0 + 2498171221
8 ??? 0x94e71012 0 + 2498170898
Thread 30:
0 ??? 0x94e709c6 0 + 2498169286
1 ??? 0x94e71155 0 + 2498171221
2 ??? 0x94e71012 0 + 2498170898
Thread 31 Crashed:
0 ??? 0x94e410d5 0 + 2497974485
1 ??? 0x93416805 0 + 2470537221
2 ??? 0x934172ff 0 + 2470540031
3 ??? 0x9132613e 0 + 2435998014
4 ??? 0x1bfa144a 0 + 469374026
5 ??? 0x1bf9de61 0 + 469360225
6 ??? 0x1bf9ea33 0 + 469363251
7 ??? 0x1bfc10ff 0 + 469504255
8 ??? 0x1bfc135e 0 + 469504862
9 ??? 0x9132adfd 0 + 2436017661
10 ??? 0x9132a9a4 0 + 2436016548
11 ??? 0x94e71155 0 + 2498171221
12 ??? 0x94e71012 0 + 2498170898
Thread 31 crashed with X86 Thread State (32-bit):
eax: 0x018a1000 ebx: 0x94e41095 ecx: 0x00000000 edx: 0xa045f1a0
edi: 0x00000020 esi: 0x00000000 ebp: 0xb10b19e8 esp: 0xb10b19b0
ss: 0x0000001f efl: 0x00010217 eip: 0x94e410d5 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x018a100c
Binary Images:
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <458eed38a009e5658a79579e7bc26603> /usr/lib/dyld -
i have restored my iphone but it has been 2days saying that the activation server is not available. please help me.
That is almost always because the phone was hacked to illegally unlock it. Contact the carrier it's locked to and ask about having it legitimately unlocked. If they will not do so, you will not be able to activate that phone.
-
Hi,
Pls confirm if you are using Windows 2000 Pro, in this O/S the
hostname is the name of the computer itself. Check the
MyComputer->Properties->Network Identification->Properties, the name you
find under the computer name will be automatically taken while
installation, if it doesn't then there is some error. However the
C:\Winnt\System32\Drivers\Etc\hosts doesn't matter much while installing
iAS 6.0 SP1 or above. Hope this helps
Regards
Raj
Hazel Seow wrote:
Do I need to provide the physcial hostname to iAS during installation
or can I just that installed name into the /etc/hosts file?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
Media Encoder saying "The Adobe Product that installed Media Encoder has not activated"
I'm using Captivate 6 and one of the applications installed alongside this is Adobe Media Encoder. I've recently moved to a new Laptop. I de-activated Cap6 on the old one and sucessfully reactivated it on the new one. However, when I try to run Media Encoder on the new laptop I get a dialog box stating that "The Adobe Product that installed Media Encoder has not been activated". Does anyone know how I can resolve this?
Mikenominder,
Start by making sure your products are updated to the latest versions. Launch Premiere Pro and choose Help>Updates. Do all the updates (if any) and restart the computer.
As far as AME is concerned, you were one click shy of your desired goal - hitting the start button on AME. AME works in the background so you can keep working in another Adobe application. So the workflow is thus.
within Premiere Pro - file>export media
choose correct settings for your output type and click ok
AME launches and ques up the render - click start...
Hope this helps,
Dennis -
The Adobe product that installed Media Encoder has not activated
My Adobe Media Encoder CS4 was working perfectly.
I even exported a video one morning and that same afternoon it refused and gave me the following message:
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
I reinstalled a couple of times, but nothing changed.
I uninstalled and installed CS5, it launched once then gave me the same message all over again.
I even tried to install it on another computer and it's giving me the same result.
I have been working on this video more a month, and I can't even export it.
Can anyone help ? I have a deadline to meet
Thanks a lotHi, I've just been having the same problem but on my mac!
I have been trying to use XDCAM EX converted Mov files on my new MacBookPro with CS6. I have just completed the installation of ProRes Quictime codecs, but when I went back to try to re-open my Adobe Media Encoder, (that I was using without problem around an hour ago), I now get the same message that The-Jade was getting
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
Any ideas?
Thanks,
JAK -
My mac air 2011 was stolen, but luckily i got it back. The one who stole it had been using it, so i erased both HD drives. Now it cant get lion x installed because it is not available in the App store. What to do ?
You may order Lion from the Apple Online store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
Ciao. -
Normally the episodes are available to download the day after airing date. But this time, the episode that aired last night is not available to download. I'm just wondering if that episode for Married to Jonas will be available in a later date or not. I did purchase the season pass.
I created a support incident Saturday or Sunday.
Their first response by email asked
"... include your purchase's order number in your reply. You can find your order numbers on your email receipts and in your Purchase History. If you need to review your Purchase History, follow the steps in this article: http://support.apple.com/kb/HT2727 ...."
They made it sound like it was my problem they would help me figure out. They already had my Apple ID so I don't know why they couldn't find the info. My luck they sent the email at 7:30 last night. The person working on my case only works Sunday - Thursday 4:30 - 11:30 pm so it will be tonight before they get my response. Nobody else can work on the problem? Come on Apple!
I mentioned this thread so they may or may not look here also.
Still very unimpressed with Apple TV process quality and the huge customer support hole. It's like they're completely unprepared for mistakes. Everybody and every company makes mistakes. -
Why Star Trek Into Darkness not available for rent on iTunes?
Why Star Trek Into Darkness not available for rent on iTunes?
Because the copyright holder hasn't given Apple permission to make it available for rental.
(102195) -
My laptop was running slow while in the regular mode, but in safe mode it would work fine. I deleted all of the content through the disk utility. Once I would go back to the recovery mode prompt and click on install os I go to the next page and get a prompt that says mac os x 10.7 is not available. There also is no picture to the left of the OS system like most people have on their recovery mode screen on the install option. Please help!
Thanks!cernstes wrote:
I was planning on buying one of those lens cleaners discs here soon and then see what happens.
That might do. There is the 'poor man's' alternative. Take a fine microfiber cloth (eyeglasses cleaning cloth) and wrap it around a business card. Insert it gently into the slot. Some times it works. Do not dismiss the possibility that the DVD drive is kaput.
I did purchase this laptop from my brother a couple years ago. He told me the first operating system that was on the laptop was OS X 10.6. He gave me the disc to install,
According to the information that I have, a Mid 2009 MBP came with Leopard (10.5). You will have to install Leopard (if you have the original disk) or purchase from the online store a Snow Leopard (10.6.3) retail disk.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
This disk is a requisite in order to install and run Lion (10.7) or any other newer OSX. You have to update Snow Leopard to 10.6.8 before downloading and installing Lion.
Ciao. -
Each time I try to install it, I get an error message saying the software for the driver is not available.
The driver appears to be available on this page:
http://www.samsung.com/us/support/owners/product/SL-C410W/XAA -
Problem Installing VM: "Database is not available"
I'm trying to install VM Manager 2.2 but when I get to creating the database I get this message:
Checking the availability of the database ...
Database is not available
Please check log from /var/log/ovm-manager/db.log
This is my db.log file:
2010-07-06-10-19-11-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-25-34-AM
Prepare to install the Oracle XE database ...
2010-07-06-10-27-50-AM
Prepare to install the Oracle XE database ...
Installing the oracle-xe-univ package (rpm) now ...
warning: source/oracle-xe-univ-10.2.0.1-1.0.i386.rpm: Header V3 DSA signature: NOKEY, key ID b38a8516
Preparing... ##################################################
oracle-xe-univ ##################################################
Executing Post-install steps...
You must run '/etc/init.d/oracle-xe configure' as the root user to
configure the database.
Done
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-JUL-2010 10:32:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Listener failed to start. See the error message(s) above...
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
TO_CHAR(SYSTIMEST
20100706 10:32:53
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
Restore done.
PL/SQL procedure successfully completed.
TO_CHAR(SYSTIMEST
20100706 10:33:34
Control file created.
PL/SQL procedure successfully completed.
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Control file created.
System altered.
Database altered.
Database altered.
System altered.
System altered.
Database altered.
Tablespace altered.
TABLESPACE_NAME
USERS
SID PROGRAM SERIAL#
USERNAME
35 [email protected] (QMNC) 1
39 [email protected] (TNS V1-V3) 1
SYS
40 [email protected] (MMNL) 3
SID PROGRAM SERIAL#
USERNAME
41 [email protected] (MMON) 3
42 [email protected] (RECO) 1
43 [email protected] (SMON) 1
SID PROGRAM SERIAL#
USERNAME
44 [email protected] (CKPT) 1
45 [email protected] (LGWR) 1
46 [email protected] (DBW0) 1
SID PROGRAM SERIAL#
USERNAME
47 [email protected] (MMAN) 1
48 [email protected] (PSP0) 1
49 [email protected] (PMON) 1
12 rows selected.
User altered.
User altered.
System altered.
Library created.
Directory created.
Commit complete.
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
File created.
Database closed.
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 805306368 bytes
Fixed Size 1261444 bytes
Variable Size 209715324 bytes
Database Buffers 591396864 bytes
Redo Buffers 2932736 bytes
Database mounted.
Database opened.
'UTL_RECOMP_BEGIN:'||TO_CH
utl_recomp_begin: 10:34:05
PL/SQL procedure successfully completed.
'UTL_RECOMP_END:'||TO_CH
utl_recomp_end: 10:34:05
User altered.
User altered.
User altered.
User altered.
User altered.
User altered.
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:34:05 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-38-31-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:38:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-51-18-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:52:09 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name: 2010-07-06-10-55-43-AM
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 6 10:55:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name: Enter password:
ERROR:
ORA-01005: null password given; logon denied
Enter user-name:Hi,
I think it is essential to set the official ip and the correct hostname in the /etc/hosts file.
Per default there is the loopback IP bound to the hostname and localhost, you should change this to the desired IP.
it should be something like this:
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.1.1 yourhost.yourdomain yourhost
Otherwise you will face some other nasty side-effects, with nfs for example.
Hope that helps
Michael -
Fonts shown as installed by Font Book not available to applications
I have several fonts that Font Book shows as installed that are not available to any of my applications, including Word and Quark Express. These fonts include Arial Bold, Arial Bold Italic, and Arial Italic, all of which I believe were installed as part of OS 10.4, along with several other fonts in the Arial family that are available to my applications. How can I get all my installed fonts to be available to my applications?
John LinkHI John,
Try deleting the FontBook pref file: com.apple.fontbook.plist
/Users/YourName/Library/Preferences. Drag the .plist file from your Preferences folder to the Trash, empty the Trash and reboot. Launch Word or QE and see if those fonts are available now.
Validating fonts
If fonts are not displayed as expected when you open documents or you cannot open documents, it's possible fonts have been corrupted. You can validate fonts to confirm they are still safe to use, and remove any corrupted fonts you find.
Take care not to remove system fonts, located in /System/Library/Fonts; removing system fonts could cause some applications to quit unexpectedly.
To validate fonts:
Open Font Book and select one or more installed fonts to check.
Choose File > Validate Font.
In the Font Validation window, review the fonts listed for warnings or errors. Use the pop-up menu to display warnings and errors separately, if necessary.
For fonts with warnings or errors, click the disclosure triangle next to the font to see which validation rules show errors.
To remove a corrupted font, click the checkbox next to the font. Make sure fonts you want to keep are not checked. Then click the Remove Checked button.
You can also use the Console utility to troubleshoot problems with installed fonts. In the console.log window, type "font" or a font name (such as "Arial") in the Filter field to find font-related log messages.
You can validate font files before installing the fonts. To do so, in Font Book choose File > Validate Files. Browse to and select a font file to validate and click Open. Font Book displays the Font Validation window and indicates whether it found problems with the font.
Carolyn -
Hey people
I just bought an iPhone5 in a store, and I can't activate it. There is written that the activation server is temporarily not available. What's happening ?Sounds like you just purchased a hacked iPhone & Apple's servers have detected such. If not an "authorized" iPhone store, return the phone for a refund.
Apple's activation servers are running just fine.
Maybe you are looking for
-
Firefox 4 crashes constantly, on opening, different pages, etc. Old firefox worked fine
I updated to Firefox 4 on my vista laptop. I am running no redirect and a script blocker, both compatable with firefox 4. Firefox 4 keeps crashing, will keep loading the "well this is embarrassing" page, even when it starts normally, I will load a pa
-
Is it possible to change the hard drive in a macbook pro, if so where from? and how?
is it possible to change the hard drive in a macbook pro, if so where from? and how?
-
Officejet Pro L7680 won't print full Page from Win 8.1
Installed driver for this printer on a 64bit Dell XPS running 8.1. The data on the computer says the installation is satisfactory. The printer printed a full page fax report and self diagnostic page. But when prining a full page from Word, or the int
-
Advanced G/L determination and segmented accounts. Need Help!!!
Hi, I have a client that is using segmented chart of accounts with advanced g/l determination this is on v9 PL05. I have setup some rules to post to certain GL's based on item and nothing else. When the client posts an AP Invoice he enters the first
-
I have following table. Id Amount 1 30 2 20 3 10 4 10 5 30 6 10 7 20 8 10 i need following output sum 60 sum where id <=3 100 sum where id <=5 140 sum where id <=8 how can i achieve this?