Packages required for 9iDS Linux
What packages I need to install when 9iDS complete is to be installed on Red Hat Linux 8.
When You run ./orainst as oracle user Red Hat check all needed RPM's. If You dont have any of needed RPM's OUI send message failed so You should download those RPM's. I think that you need kernel 2.4.9-e.25 (i have Red Hat advanced server 2.1, dont know for red hat 9), glibc and pdksh RPM's are always needed for oracle.
Similar Messages
-
Oracle Enterprise Linux : Packages required for 11.2.0.3 RAC
I have downloaded Oracle Enterprise Linux 64Bit back in November 2012 (Oracle Linux Release 6, Update 3 )
Once I install OEL , How can I verify if all the necessary packages required for smooth installation of Grid Infrastructure 11.2.0.3 is installed ?Hi,
the new name for "oracle-validated" under OL6 is oracle-rdbms-server-11gR2-preinstall:
https://blogs.oracle.com/linux/entry/oracle_rdbms_server_11gr2_pre
Regards
Sebastian -
Pre-requisite packages required for Oracle R11i
Hi Gurus,
I am new to DBA.I am working with oracle 11i cloning.In that task is to pre-clone from source system(os:Red Hat-4.0) and do post clone in target system in which I installed new os(os:Red Hat-4.0).
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages.
Could you please help me.
Thanks
VinothHi;
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages. Imagine you are making new installation on your target server. So you need to check all pre-req which is mention in below notes. You need to have all rmp hosts file edit and some other steps.
Please see:
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
PS: I suggest also see my blog http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
Regard
Helios -
How to download packages (Required for 11gR2 Installation)?
Hello
I am not able to download mentioned packages (Required for 11gR2 Installation) Can you Provide link for the same?
SUNWbtool
SUNWhea
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs (ISO8859-1)
SUNWi15cs (ISO8859-15)
SUNWxwfnt
SUNWarc
SUNWcsl
Thanks,
SaurabhGo examine your Solaris installation DVD.
The packages are there (and should have been installed with a default setup of your OS). -
What is the business packages required for "plant maintenance"
hi experts,
i got a business requirement
how to show the plant maintenance module with the functionalities to show in the portal
is ther any process is there
or business packages required
thanks and regards
bvrhi raghu,
thanks for your reply,
1. from portal view where i have to configure the jco destinations seperatly for plantmaintanance or
normal jco will work
2. looking the sap note 1291222 where my ecc60 should be in the sp15 lever for ea-appl-600
and poral side bp erp 05 plant magr 20 1.0 sp15
refering this links
http://help.sap.com/bp_bl603/BBLibrary/General/Prerequisites_Matrix_BL_EN_IN.xls
could you guide me
thanks and regards
bvr
Edited by: bvr on May 13, 2009 7:12 AM -
Packaging required for event-driven message processing
Hi,
Could you pls. let me know whether message packaging is required for using event-driven message processing in Integration Server (PI).
Also can we use event-driven message processing in Integration Server (PI) for outbound HTTP adapter interface.
Thanks.
Best Regards,
Gajendra.What is your scenario and why exactly your are looking for event-based message processing?
Normally those are background jobs which triggers the services(inbuilt ) and makes the process designed by us to run.
In case ofR/3 its possible to do so i.e to trigger messages based on event like incase of proxt to PI can be done through Event-based
Rajesh -
Requirement for RAC - Linux AS mandatory ?
Does the standard Linux 8 version can be used for RAC R2 or we need only Linux AS for the RAC configuration.
What is the linux requirement for the RAC R2 configuration ?
Thanks,
AshokThanks for the info.,
could you tell me what firewire components you are using? I know that we need the fireware cards in the pcs/servers, the firewire hub, and the firewire drive. However, I am having difficulty identifying which firewire components to buy, ie., which ones are compatible with Linux Red Hat (AS). The Red Hat HCL revealed nothing to me. Any info you could give me on the components you are using would be greatly appreciated and save me a lot of time.
Thanks again,
Steve K. -
RPMS compatibility packages required for 8.0.5.1 EE install?
Hello,
I am using Caldera OpenLinux 2.2. Do I need to install the
RPMS compatibility packages from Redhat to relink Oracle
executables for Oracle 8.0.5.1 Enterprise Edition install?
TIA,
Phil
nullInstalling Oracle8I EE on Caldera 2.2
Follow instructions for setting up the Linux environment for the Oracle8I install:
Install the Java Runtime Environment (Refer to Oracle Document# A74960-02)
Install the Tool Command Language (Refer to Oracle Document# A74960-02) Perform steps 1 -> 6. Step seven is done after the patches are applied.
Install libcrypt software or the Oracle Intelligent Agent cannot be relinked after the patches are applied:
Source: ftp.gnu,org
Binary: ftp:linuxland.de
Create linux id oracle with group dba
Edit oracles profile to include the following variables:
LD_LIBRARY_PATH=$ORACLE_HOME/lib
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/product/jlib:<JRE install directory>
ORACLE_BASE=<Oracle Base Directory>
ORACLE_HOME=$ORACLE_BASE/product/8.1.5
ORACLE_SID=<Your Choice>
PATH=$PATH:$ORACLE_HOME/bin
Oracles patches wants gmake so create a symbolic link:
ln s gmake make
Run the installer:
Ive had to cd to directory /mnt/cdrom/install/linux and run the installer with the command runInstaller runIns.sh
When ask to build an instance go ahead but save the scripts to files on the disk. The scripts can be run later once the patches are applied.
Before any patches can be applied the ldflags file must be created and genclntsh must be run.
cat $ORACLE_HOME/network?install/ldflags* > $ORACLE_HOME/lib/ldflags
Remove all newlines from ldflags.
Run genclntsh
Copy $ORACLE_HOME/lib/ldflags $ORACLE_HOME/network/lib/.
Ive also modified file /etc/ld.so.conf, adding the line <$Oracle Home>/lib. DO NOT USE $ORACLE_HOME but the fully qualified path. Run ldconfig.
Apply the Oracle8I patches 81501 and 81502. The single patch file contains both. Review the patch logs in the /tmp directory. There should be no errors.
Follow the instructions for relinking the Oracle Intelligent Agent as outline in Oracle Document# A74960-02. You should have already install the tcl software so you can go step 7.
null -
Fusion middleware system requirements for oracle Linux 7
Hello,
I'm currently studying document E54272-01 (Oracle® Fusion Middleware System Requirements and Specifications
12c (12.1.3) September 2014) in order to install Fusion Middleware 12c products on a Oracle Linux 7 server.
The "Linux Operating System Requirements" section doesn't include Oracle Linux 7 system requirements, does it mean Fusion Middleware 12c products are not yet certified for OL7?
PS : I'm unable to find a pdf version of E54272-01 document, if anybody has the URL, I'll appreciate.
DanielDaniel,
The compatibility matrix for 12.1.3 can be found here:
http://www.oracle.com/technetwork/middleware/fusion-middleware/documentation/fmw-1213certmatrix-2226694.xls
As you will see, for now only Oracle Linux 5 and 6 are compatible.
Thanks,
Parisi -
Korean Language Support Package required for Reader but not Acrobat?
One of our departments on campus has created a form that is causing some users to get a message prompting them to download the Korean Language Support Package in order to fill in the form fields.
When I originally tested this in Acrobat Pro 9 I didn't get any errors. Another user also reported the issue recently (two this week). So we tested it again, but this time used both Reader 9 and Reader X -- both programs were generating this message to download the language pack. The form appears to be completely in English with no Korean characters. It uses fairly standard fonts and I didn't see any embedding or encoding issues with the fonts.
Aside from having end users download a Korean Language Support Pack to view a PDF that doesn't seem to contain any Korean, are there any other options out there without recreating the form from scratch? Here is a list of the fonts used in the PDF. The only types of encoding are Ansi and Identity-H (which I expanded in the SS above), with the latter fonts being embedded within the PDF.
Any ideas? The form is linked below. Thanks in advance for your replies.
Here is a link to the PDFSOLVED
While our problems differ, my solution may still be relevant.
My culprit was a rogue font in an embedded Visio drawing. I identified and located the font using the "List text using non-embedded fonts" Preflight analysis in Acrobat 9.4 Pro. I checked the encoding of each non-embedded font and discovered that Arial Unicode MS used Korean font encoding (specifically, KSCms-UHC-H). See screenshot below. Doubleclicking on one of the font properties highlighted the offending text in the pdf.
I went to that location in the source file, which happened to be in the first embedded Visio drawing (shown above). I double clicked the drawing, selected all, and selected Arial font. Then I regenerated the pdf and viewed it in Reader X. The Korean language pack error message did not appear and all Visio drawings displayed normally.
I would recommend using the Acrobat preflight tools to locate text or objects with incorrect font encoding within your PDF or form, then surgically striking (or carpet bombing) the affected location(s) in the source files with embedded/supported fonts.
Hope this helps.
Message was edited by: mugg326 -
Business Packages required for SAP EP.
Hi Friends,
I have installed SAP NetWeaver with software Units AS Java, DI, EP Core and EP.
Then updated the system with SP Stack 17.
Now, I need to apply business packages for following modules.
Employee Self Service
Management Self Service
Expense and Time Management
HR Administration
Self Service Administration
SAP Learning Solution
I would like to know what all business packages need to be applied. And from which path SAP Service market place I can download them?
Thank you for your help in advance.
Regards,
Prashanth.R.G.Prashanth,
Check this wiki.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/todownloadPortalrelatedBusiness+packages
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/downloadingaBusinessPackageanduploadingthe+files
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=31476
Regards,
Sandeep Tudumu
Edited by: Sandeep Tudumu on Dec 4, 2008 5:42 PM -
Packages required for a minimalistic KDE Deskop?
Dear all,
I have installed Archlinux base and would like to install KDE Desktop. Which is the best option to get a minimalistic KDE desktop? Will 'packman -S 'kde-base-workspace' meet the needs? Please help.
Thanks,
egnuegnu wrote:Thank you, may I know what all packages will it contain ?
You can verify the packages that it will install when you run 'pacman -S kdebase-workspace'. You can also use 'pacman -Si kdebase-workspace' to verify the package and its dependencies.
I strongly recommend you also run 'man pacman'. -
Question about the packages for OS Linux
Hi all,
this is little weird question but I could not find the answer on net so trying to get some out here:
I need to have list of package requires for oracle (9.2.0.4 & 10.2.0.4) vesion for OS Linux
I know it is old versions of oracle but app and management requires this soon!! please guide!!
thanksHi,
Below note mentioned required packages
Requirements For Installing Oracle10gR2 On RHEL 5/OEL 5 (x86_64) (Doc ID 421308.1)
For oracle 9i, below packages are required
$ rpm –q make-3.79.1
$ rpm –q gcc-3.2.3-34
$ rpm –q glibc-2.3.2-95.20
$ rpm –q compat-db-4.0.14-5
$ rpm –q compat-gcc-7.3-2.96.128
$ rpm –q compat-gcc-c++-7.3-2.96.128
$ rpm –q compat-libstdc++-7.3-2.96.128
$ rpm –q compat-libstdc++-devel-7.3-2.96.128
$ rpm –q openmotif21-2.1.30-8
$ rpm –q setarch-1.3-1
Kernel parameters
Kernel
Parameter Setting To Get
You Started Purpose
Shmmni 4096 Maximum number of shared memory segments
Shmall 2097152 Maximum total shared memory (Kb)
Shmmax 2147483648 Maximum size of a single shared memory segment
Semmsl 250 Maximum number of semaphores per set
Semmns 32000 Maximum number of semaphores
Semopm 100 Maximum operations per semop call
Semmni 128 Maximum number of semaphore sets
file-max 65536 Maximum number of open files
ip_local_port_range 1024 - 65000 Range of ports to use for client connections
rmem_default 1048576 Default TCP/IP receive window
rmem_max 1048576 Maximum TCP/IP receive window
wmem_default 262144 Maximum TCP/IP send window
wmem_max 262144 Maximum TCP/IP send window
For more information kindly refer installation guide
Thanks,
Krishna -
What packages are required for an 11.2.0.3 install on Solaris 11?
Where can I find information on which packages are required to install Oracle 11.2.0.3 on Solaris 11?
The documentation only mentions Solaris 10. I tracked down the packages required for Solaris 10, and most of them are either included in the GA release of 11 or obsoleted.
There are however a couple of packages that are missing from the base install of Solaris 11:
SUNWarc (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* developer/library/lint (missing)
SUNWhea (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* system/header (misising)
So it looks like developer/library/lint and system/header are packages from required for Solaris 10 that are missing on 11. The installer however doesn't check for any packages whatsoever.
Does that mean it's safe to install the database?
Edited by: 894946 on Nov 21, 2011 8:38 AMHere is list of packages you need in order to install Oracle 11gR2 on Solaris 11:
SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
Some of the above are installed by default which you can find by:
pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
I believe you will only have to install the following:
pkg install compatibility/packages/SUNWxwplt SUNWarc SUNWhea SUNWxorg-client-programs SUNWxorg-clientlibs
Cheers -
Software and Hardware Requirement for Management Agent
Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.
Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.
Maybe you are looking for
-
Runtime errors in Roxio Media Manager 9
I am running Desktop Manager 4.5 with my 8330 curve. I am getting runtime error for mediamanager9.exe whenever I try to use it to transfer data over to my 8330. Any ideas to resolve this issue?
-
How to connect a USB-6008 with lookout6.0?
hi >>> I am a student in electrical and computer department, i want to ask about How to connect a USB-6008 with lookout6.0 if thats possible?Could you provide some help? Regards Manal
-
Hi, I own a Macbook Pro early 2011 15" and been doing some research on SSD. Is this Samsung 840 Pro 256 GB compatable? Thanks in advance for your help. P.S. I use my macbook pro for animation and design use.
-
Premiere Pro - Disk Full Error
I am trying to export a project and for certain settings both Premiere Pro CC and Media Encoder CC are giving me an error message - disk full. The disk is nowhere near full and just in case, I have cleared preferences and cashe, but it did not help.
-
I have a third-generation I like to read at night. I would like to be able to preserve my night vision and change the font color to red with a black background (I use night mode on both my Kindle app and iBooks). Can this be done? How? Thanks. Ziy