Packages to multiple queues/groups

Hi,
We have an application, which sends/receives applicant packages from single queue Ex: Queue name is 'XYZ'. We would like to have the packages to be received to different queues based on the City name from where they are sending, how can we achieve this?
Ex: User 'A' belongs to NY City and logged into 'ABC' group, he sends one package which is received by applicant, applicant fills in the form and sends the email back, now it has to come and sit in 'ABC' queue. Like this we would like to maintain multiple queues and get the requests to corresponding queue.
I am very new to Adobe LiveCycle ES Workbench, can anybody guide me to achieve this.
Thanks in advance.
PK.

LiveCycle doesn't really allow you to create "queues" - rather, there is automatically a queue created for each user and group. So if you want to create a queue called "ABC", the easiest way is to create a group called "ABC". Then you can assign all the people who you want to be able to action the item to the group.
You can create the Group either in LDAP, or within Adminui.
Howard
http://www.avoka.com

Similar Messages

Support package upgrade / SPAU with multiple queues

Hello, We are upgrading our support package level on our ECC 6.0 system. I divided up the support packages into 4 different queues:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
SAP_BW
SAP_AP
SAP-HR
After importing each queue, I had a few things to do in SPDD and SPAU. I created a new SPDD or SPAU transport request for each queue. My question is now what is the recommended procedure to handle these SPAU/SPDD transport requests when you have multiple queues? I plan to define the same queues when doing QA and PRD. Do I mark all of the requests and then when I do each queue, I only specify that particular request? Thank you in advance for your help.
Best regards,
Russ Cook

Hi Russ,
when did you export the different SPAU requests or didn't you export them at all?
If the export happens only after all queues are already imported, this final system state (component version + SP level) is stored in the requests.You are then not able to include e.g. the request for the SAP_BASIS SPs into the SAP_BASIS queue, because the other components are still on the old version, while according to the request they should be on the newer state.
So, the right procedure would be; import the SP queue, do the modification adjustment for this queue, mark the workbench request as modification adjustment transport request and export this request. Then you can import the next SP queue.
Best regards,
Dirk

Multiple Queues(Content Specific) - Can't get more than two queues

Hi,
I have a ccBPM scenario, which collects messages read by the file adapter and then sends them grouped.
It's working fine in many different configurations, but I'd like to configure it in a way described in the PDF "How Tou2026 Configure Inbound Processing in ccBPM Part II: Queue Assignment", which is using Multiple queues - content specific.
If I put 2 queues (after defining a correlation for a message field batchID), it works fine. The messages with batchID=A are processed by one instance process from queue 001, and the messages with batchID=B are processed by another instance process from queue 002.
But if I put 4 queues (SWF_INB_CONF), all the message still keep going to just 2 queues, and not 4. There is no problem, because still the messages with batchID = X are all processed by the same instance process, but I want to add more parallelization to the process using 4 queues.
I've refreshed cache and reactivated, but it will still work with 2 queues and not 4. I've also made sure that the files read have 4 different batchIDs equally distributed among all the files.
I don't know what I'm missing...
Thanks!

Solved it with SAP help.
It seems that even if you config 4 queues (content-specific) to be used in SWF_INB_CONF, it is normal that not all queues allowed are used at runtime. The messages are distributed to the queues based on the correlation defined for the process, narrowing down the result afterwards to the number of allowed queues using a hash algorithm.
Often it is necessary to specify 50-100% more queues to load the actually intended number of queues with messages.
I could reach 4 queues really used setting the parameter to 10 queues.

VCenter Single Sign-On Permissions Assignment for Members of Multiple AD Groups

Hi all,
I ran across an interesting issue whilst assigning permissions using Active Directory groups within vCenter.
Environment
1 vCenter Appliance managing 2 Datacenters (1 Datacenter with 2 Clusters, 1 Cluster with 2 Hosts, 1 Cluster with 4 Hosts, 1 Datacenter with 1 Cluster containing 1 host.)
vCenter has an SSO Identity Source configured using Active Directory (Integrated Windows Authentication).
vCenter and all hosts are domain members of child1.parent.com.au
The Active Directory Forest contains a parent domain, let's call it parent.com.au, and two child domains child1.parent.com.au and child2.parent.com.au.
Although the Identity Source was configured for my child domain, using child domain credentials it added the parent domain and subsequently both child domains. Okay, so there are trusts, I'm okay with this. The interesting issue is yet to come.
Two Active Directory Groups were added. Deployment Admins A and Deployment Admins B.
Two vCenter Roles were created with similar names. VM Deployers A and VM Deployers B
Deployment Admins A was assigned the Deployers A role to Cluster A (Cluster, VM Folders, Datastore Folders)
Deployment Admins B was assigned the Deployers B role to Cluster B (Cluster, VM Folders, Datastore Folders)
Note: No objects overlap. All hosts, vms and datastores are isolated to each cluster.
So the next step is assign an child1 AD User to the Deployment Admins A group. As expected the user using credentials child1\user can connect to vCenter via the VI Client and see all the relevant objects. Great!
So now I assign the same child1 AD user to the second AD group Deployment Admins B. Now we wait and nothing happens. The permissions don't change. The user logs out and logs back in using the same credentials and still the permissions don't change.
So I remove the user from both AD groups and get them to log out and in and sure enough they can't.
This time I assign the child1\user account the roles as set out previously. So child1\user account is assigned to both roles in place of each AD Group. The expected behaviour is observed. As I add the second permission set, the objects become visible within the VI client.
Okay so now I remove the explicitly assigned permissions and reassign via the groups and this time I ask the user to log in via the UPN ([email protected]). Whoa! It works.
So it seems that assigning permissions for the same user in multiple AD groups across multiple roles can only be achieved when the user uses a UPN login to the VI Client.
Has anybody else found this to be the case?
If so, were you able to fix it?

Hello,
I have found this to be the case and think it is more due to SSO than AD. If you look at how you login as the 'administrator' when you first configure SSO it is in effect using UPN. I would raise this as a case to VMware and make sure they are aware of the issue. There are some issues with SSO being worked each day.
Best regards,
Edward L. Haletky
VMware Communities User Moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014
Author of the books 'VMWare ESX and ESXi in the Enterprise: Planning Deployment Virtualization Servers', Copyright 2011 Pearson Education. 'VMware vSphere and Virtual Infrastructure Security: Securing the Virtual Environment', Copyright 2009 Pearson Education.
Virtualization and Cloud Security Analyst: The Virtualization Practice, LLC -- vSphere Upgrade Saga -- Virtualization Security Round Table Podcast

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

How do I use same MDB for multiple Queues? Deployment ?

          Here is what I am trying to do
          I have written one MDB that I want to use for multiple queues. I have seen posting
          mentioning that code a new weblogic-ejb-jar.xml to define other queues as the
          solution.
          Is there any other work around?
          I want to add queues in future as and when needed. I don't want to modify the
          already deployed jar to replace it with new weblogic-ejb-jar.xml everytime I have
          to add another queue for the message-driven-bean. Is is possible to use some kind
          of reference tag and just put weblogic-ejb-jar.xml in a new jar file and deply
          that every time I have a new queue to use for this MDB ( I don't think so, but
          again ???).
          Any help would be greatly appreciated.
          Chris


Sorry -- that's the only solution for now.
          greg
          "Chris" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Here is what I am trying to do
          >
          > I have written one MDB that I want to use for multiple queues. I have seen
          posting
          > mentioning that code a new weblogic-ejb-jar.xml to define other queues as
          the
          > solution.
          >
          > Is there any other work around?
          >
          > I want to add queues in future as and when needed. I don't want to modify
          the
          > already deployed jar to replace it with new weblogic-ejb-jar.xml everytime
          I have
          > to add another queue for the message-driven-bean. Is is possible to use
          some kind
          > of reference tag and just put weblogic-ejb-jar.xml in a new jar file and
          deply
          > that every time I have a new queue to use for this MDB ( I don't think so,
          but
          > again ???).
          >
          > Any help would be greatly appreciated.
          >
          > Chris

How to implement multiple queues in one circular buffer?

Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?

LawrenceChong wrote:
Spoiler (Highlight to read)
Recently I have successfully shared data of 2D array among different vis in a project, using circular buffer.
However, there is only one circular buffer allowed in one project for one data type.
I want different vis, running and getting data from circular buffer in different speed, all getting data as a queue from circular buffer. Like the circular buffer's read continuous mode.
The problem is that after a vi reads in continuous mode, the read data is deleted from the circular buffer. Then other vis can not use them any more and can not keep track where they should begin to read again.
So if it is possible that there are multiple pointers or queues in circular buffer to keep track the progress of different vis, and data only update when it gets input from DAQ but not deleted when read?
THe last time I wrote a multi-subscriber cirular buffer was in LV 6. Since then I have found that polymorphic queues perform much better so I now use multiple queues. One queue for each subscriber of the data. The subscribers are then responsible for maintaining their own histories.
So just use multiple queues.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

One shared mailbox with multiple distribution groups connected and the sent items folder - how to configure?

Hi!
I have been struggling for a while now with the following issue.
For starters:
We are using exchange 2010 in combination with outlook 2013 on client computers.
Cause of the limitations concerning the number of mailboxes in outlook im looking for a solution to receive and reply
to multiple aliasses. So i did the following:
1. Configured one shared mailbox.
2. Configured multiple distribution groups
3. made the shared mailbox a member of the distribution groups
4. Configured full access and send as permissions for myself on the shared mailbox ( testing )
5. Gave send as permissions to the shared mailbox in Active directory.
6. Logged in to OWA to setup rules for the shared mailbox.
I now receive emails from all connected distribution groups in the shared mailbox and also in the right folder.
I do however have to select the proper from address when i reply to an email.
the email sent by the main SMTP of the shared mailbox is placed into the sent folder of the shared mailbox.
I setup the senddelagate blabla in register.....
When i sent an email as one of the connected distribution groups it fails to put the sent item in the sent items folder of the shared mailbox. The email is sent using the proper address but placed in the sent folder of my main account.
I want this emails to end up in the sent items folder of the shared mailbox. Or even better, in a sent items folder for each of the addresses.
Any suggestions ?
Thanks in advance!

Hi,
As what
Rajkumar says, sending as a shared mailbox(full access permission) will put the email in the sent item of shared mailbox. But it cannot be located in the “sent item” of a distribution group. Because
it is a distribution group instead of a enabled user mailbox.
According to your further description, I understand that the reason why you configure that is some users reached the
limitation about the number of Exchange accounts you can include in the same Outlook profile. Is it rights? If I misunderstand, please point it out.
By default, user can only add 10 Exchange accounts to the same profile. You can customize the limit to the number Exchange accounts in the same profile using the following registry data:
Key: HKEY_CURRENT_USER\software\policies\Microsoft\exchange
DWORD: MaxNumExchange
Value: integer value starting at 1 (default = 10 if DWORD is missing)
http://blogs.technet.com/b/outlooking/archive/2012/12/24/clarification-on-outlook-2010-and-additional-exchange-account-supportability.aspx
Hope it helps.
Thanks,
Winnie Liang
TechNet Community Support

Provisioning multiple AD Groups from a Single Privilege

Experts,
We're encountering a situation here when we provision to multiple Active Directory groups from a single IDM Role.
The scenario is this:
We have a workflow that has multiple conditional and switch tasks that result in the provisioning of users to Active Directory 2008 (mixed mode) Our workflow uses the provisioning framework and all users have been granted the ONLY privilege for the system.
The workflow will result in adding the users to multiple AD groups sometimes two AD groups that are associated with a single IDM role. The first assignment always works, the second does simply does not occur, no entry in the system or job log although IDM does show that the role has been assigned with an 'OK' status.
We've accomplished a workaround by redesigning the workflow so that only single roles are assigned at a time and using chain result OK links to move from one provisioning activity to another, but frankly, we are unsatisfied with this. IDM should be handling this much better through
I'm wondering if we have a pending value floating out there and we should just be applying the pending value at the end of every AD group add.
Any thoughts on this would be appreciated.
Thanks,
Matt

Matt,
In your post you mention "I'm wondering if we have a pending value floating out there and we should just be applying the pending value at the end of every AD group add"... I'm faced with a similar issue were I'm left pending values for privileges after the group is assigned.
I've imported the AD groups as privileges. I assign them without issue. But when I review the assignments I can see that each corresponding privilege assignment now has a pending value. I can not remove the privilege from the user at this point.
Have you seen this before? Any suggestions on how I can clean this up. BTW, I'm using the SAP PF basically unchanged...
Thanks!

How can I place calendars in multiple calendar groups?

I would like to use a group for each of my family members but reference some of the same calendars from multiple calendar groups. Here is an example:
Lets say I have a calendar for school, sport1, sport2, activity, family, and work
I would like the groups to look like this:
Me: family and work
Wife: activity and family
Son_1: school, sport1 and family
Son_2: school, sport2 and family
When a group is visible, that person can see the activities in which they participate. When several groups are visible, though, only single copies of shared events would appear and shared events would only have to be entered once.
Is there a way to do this or do I need to place this on the feedback page?

Bernd Alheit wrote:
How can I place Windows Media Player in my PDF?
Why want you the media player in a pdf file?
e.g. pushing Mozart - button to listen to Mozart's music. But it must be a script not embedded player. Is it possible?

How to go for multiple business group

Dear All.
This is a very common and perhaps very old question now. But I just want to check what is the common process to go through to achieve multiple business groups. We are in oracle 12.1.XX and have single business group but now looking to implement more business group for other countries in same instance. I understand most of the objects would be same and they can be reused like DFF, Locations, Lookups, Value set etc but need to focus more on RICEW components. May I request you to please share your experience on this and let me what are the mandatory steps we need to follow, like running some seeded programs, restructuring other objects, creating seprate DFF, Valueset etc.
Thank you in advance (But that dosent mean I will not thank you later on )
Avinash

Hi Vignesh,
Thanks again for your quick response..
We are not migrating employee records.. we have one business group already and we want to create new business group for newly aquired company which is in other legislation. So just want to know what would be impact on existing BG and what are the objects we can reuse. For example we need to create New responsibilities, Menu, functions, job, position, person type etc.. Similarly we can use existing location, valuesets from existing BG in our new BG. Like this we want to create a list first so that we can plan our implimanation and come up with timeline..
I hope it is clear now.
Thanks,
Avinash

Packages in the queue don't exist in the tp buffer

Hello
Please could you help us???. We have import packages SAPKINBC9A, but we have a problem, because we obtein error Packages in the queue don't exist in the tp buffer, what do we make for this packages exists in the buffer??
Thanks

Hello
Please could you help us???. We have import packages SAPKINBC9A, but we have a problem, because we obtein error Packages in the queue don't exist in the tp buffer, what do we make for this packages exists in the buffer??
Thanks

Report painter:Deletion of multiple report groups

Hi Gurus,
I have a requirement of deleting multiple report groups and reports created through report painter since these are no more used
I checked in options/functions available in SAP, but couldn't find any option for mass deletion of reports groups available
I understand we can use an LSMW to do this for multiple report groups however apart from this is there any function provided by SAP for deleting multiple report groups
Thanks,
Gaurav

Hi Ajay,
Thanks for the suggestion
I also couldn't find anything handy. In my case the time in manually deleting would have taken less than creating an LSMW for such one-off situation so just delete the obsolete report groups manually
Thank you,
Gaurav

Http to Abap Proxy communication with multiple queues generation in Recevr

Dear SDNs,
I need some help in the following scenario, appreciate your suggestions and help .
I am receiving the messages from sender to PI on http posting, from PI I am sending the message to SAP system using receiver xi communication channel ( receiver is abap proxy).
Sender will send the messages in QOS=EOIO, QUEueID=XXXt_100 etc parameters, when large volumes cases, it is getting delayed to process it using a single queue.
We are thinking to dynamically generate multiple queues in PI and send the same queue ids to receiver SAP system to process all the messages quickly in SAP System also.
Help /Clarifications needed:
1. XI receiver communication channel in pi does not provide any options to generate dynamic queue id based on payload content (using dynamic configuration) and sent it to SAP.
2. Module Tab in receiver communication channel also got disabled to add custom adapter modules, can we add custome adapter module on xi receiver channel to generate dynamic queue id ?
Really appreciate your immediate help and suggestions.
Thanks.
Suraj.

Dear Praveen,
Thanks lot for the immediate reply, we need to use EOIO, as the messages need to be processed in the same order we send and receive, there is no flexibility in QOS=EOIO, Appreciate if there is any other thoughts?
Thanks In Advance.
Suraj.

Multiple queue vs single queue - peformance

Hi All,
Could pls throw some light on the following design.
Currenty, We have more than 100 queues and for each there is a different MDB to receive the message.Now, somehow we made a single instance of same MDB listen to all these queues by looking at the input message. The requiement now is, is it possible to club all the queues into single queue as it's asynchronous messaging. The receiver may also try write into the same queue at the end of message processing.If so, how would be performance. Is this performance better than having multiple queues?.
The message are expecting to be 25 k/day in the queue. And we are using Weblogic server.
Please let me know if you need more details.
Thanks
Srinath

You could try to use selectors to assign messages to particular MDBs. This way you off load some of the work on the broker but selectors by their nature usually have an impact on broker's performance. It all depends on your application, your expectations, size and the rate of your messages, how long it takes to process them on the client side. There is no simple answer in this case. You would have to test some scenarios to come up with a best solution that fits your requirements. Having said that I personally believe that some degree of partitioning of your queue could be beneficial. On a heavily loaded system it may increase the concurrency of the system and its resilience, particularly if you place the queues in different brokers. Try to imagine your broker as if it was a DB server with just one table (I'm not sure if this is the best analogy but I can't think about anything else at the moment).

Packages to multiple queues/groups

Similar Messages

Maybe you are looking for