Packed number conversion

Hi.
Net connector returns the string and when I parse it I end up with packed number format in STRING data type.
Is there some function in connector or external library that simply and quickly transforms BCD string to Decimal and vice versa?
Or any trick to do that. Tried to retype via net connector, but says string cannot be converted to decimal.
Am I only one who needs this functionality. Was digging google half day found nothing.
Thx
Juraj

Hi Gaurav,
I tried a small program and found no problem in moving the data. Just check the length of char field..or try this program
DATA: pack TYPE p DECIMALS 5,
char(10) TYPE c.
pack = '5.00345'.
MOVE pack TO char.
WRITE char.
//Kothand

Similar Messages

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

Error ORA-06502, numeric or value error character to number conversion

I have been trying to create an email including data from a table as part of the body. Whenever I try to send it, I get an error ORA-06502, numeric or value error, character to number conversion. If I take out the part referencing the table, the email will go without error, but if I put it back in I get the error.
There is the code:
DECLARE
v_email_body CLOB;
v_from_email_address VARCHAR2(100) := v('APP_USER');
v_id NUMBER;
BEGIN
v_email_body := 'Please pay the attached invoice from FY '||:P14_FY||' funds
Date: '||:P14_PURCHASE_DATE||'
Vendor: '||:P14_VENDOR||'
Invoice Number: '||:P14_INVOICE||'
Invoice Date: '||:P14_INVOICE_DT||'
Due Date: '||:P14_INVOICE_DUE_DT||'
KSR Number: '||:P14_KSR||'
DTS PO: '||:P14_DTS_PO||'
FINANCE DO: '||:P14_FINANCE_PO||'
FOR detail IN(SELECT OB_CODE
FROM BUDGET_USED
WHERE P_ID = :P14_ID)
v_email_body := v_email_body||detail.OB_CODE||utl_tcp.crlf;
LOOP
FOR detail2 IN (SELECT ob_code, amount
FROM budget_used
WHERE p_id = :P14_ID)
LOOP
v_email_body := v_email_body||detail2.ELCID||' - '||detail2.AMOUNT||utl_tcp.crlf;
END LOOP;
END LOOP;
v_email_body := v_email_body
'||:P14_EMAIL_NOTES||'
Thanks.
v_id := APEX_MAIL.SEND
(p_to => :P14_SUBMIT_TO
,p_cc => v('APP_USER')
,p_bcc => '[email protected]'
,p_from => v_from_email_address
,p_body => v_email_body
,p_subj => 'Invoice, '||:P14_VENDOR||', '||:P14_INVOICE||'');
--Having set up your email, now add one (or more) attachments...
FOR c1 in (SELECT FILENAME
,BLOB_CONTENT
,MIME_TYPE
FROM file_subjects f, apex_application_files a
where a.name = f.name
and f.P_ID = :P14_ID) LOOP
IF c1.blob_content IS NOT NULL THEN
APEX_MAIL.ADD_ATTACHMENT( p_mail_id => v_id,
p_attachment => c1.blob_content,
p_filename => c1.filename,
p_mime_type => c1.mime_type);
END IF;
END LOOP;
END;
Apex_mail.push_queue();
This is important to my company to be able to put this data into an email. If anyone can help me, I would greatly appreciate it. Thank you in advance.

Lets isolate the erroring line by running the code in debug mode and adding some debug lines at various stages in the code
Apex has a builtin function named wwv_flow.debug which can print messages to the debug stack and would be visible when the page is run in debug mode.
DECLARE
v_email_body CLOB;
v_from_email_address VARCHAR2(100) := v('APP_USER');
v_id NUMBER;
BEGIN
wwv_flow.debug('BEGIN');
v_email_body := 'Please pay the attached invoice from FY '||:P14_FY||' funds
Date: '||:P14_PURCHASE_DATE||'
Vendor: '||:P14_VENDOR||'
Invoice Number: '||:P14_INVOICE||'
Invoice Date: '||:P14_INVOICE_DT||'
Due Date: '||:P14_INVOICE_DUE_DT||'
KSR Number: '||:P14_KSR||'
DTS PO: '||:P14_DTS_PO||'
FINANCE DO: '||:P14_FINANCE_PO||'
'||:P14_EMAIL_NOTES||'
Thanks.
wwv_flow.debug('Before sending mail');
v_id := APEX_MAIL.SEND
(p_to => :P14_SUBMIT_TO
,p_cc => v('APP_USER')
,p_bcc => '[email protected]'
,p_from => v_from_email_address
,p_body => v_email_body
,p_subj => 'Invoice, '||:P14_VENDOR||', '||:P14_INVOICE||'');
wwv_flow.debug('Before attachements');
--Having set up your email, now add one (or more) attachments...
FOR c1 in
         (SELECT FILENAME
        ,BLOB_CONTENT
        ,MIME_TYPE
        FROM file_subjects f, apex_application_files a
        where a.name = f.name
        and f.P_ID = :P14_ID)
LOOP
    IF c1.blob_content IS NOT NULL THEN
    APEX_MAIL.ADD_ATTACHMENT( p_mail_id => v_id,
    p_attachment => c1.blob_content,
    p_filename => c1.filename,
    p_mime_type => c1.mime_type);
    END IF;
END LOOP;
wwv_flow.debug('Finished attachements');
Apex_mail.push_queue();
END;What is the last message you see in the debug after running the page in debug mode and submitting it ?

Numeric or value error: character to number conversion error

I'm having problems inserting a value from a date picker field (DD-MON-YYYY HH MI )
i'm submitting this value to a packaged procedure that accepts this field as VARCHAR2 .
on the insert, i do a to_date( P_DATE, 'DD-MON-YYYY HH:MI PM' )
and i get the numeric conversion error.
If I change the to_date on the procedure side, I get the :could not read the end of the format mask - which I've found threads about on this site.
I've tried using HH24 and different formats, but I get one of the two above errors on the insert.
If I don't fill in the datepicker field at all, it works fine.
help is appreciated !
Bill

Here is the trace anyway:
*** ACTION NAME:(application 4000, page 1) 2004-09-24 12:58:44.052
*** MODULE NAME:(HTML DB) 2004-09-24 12:58:44.052
*** SERVICE NAME:(TOPS) 2004-09-24 12:58:44.052
*** SESSION ID:(151.1) 2004-09-24 12:58:44.052
*** 2004-09-24 12:58:44.052
ksedmp: internal or fatal error
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Current SQL statement for this session:
declare
rc__ number;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 255;
null;
null;
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
:rc__ := rc__;
end;
----- PL/SQL Call Stack -----
object line object
handle number name
6A3C4A00 532 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2502 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2748 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A0E63C8 991 package body FLOWS_010500.WWV_FLOW_FORMS
6A11675C 932 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A11675C 247 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A4B54E0 8341 package body FLOWS_010500.WWV_FLOW
6A2A99F0 102 procedure FLOWS_010500.F
6A2B9E54 10 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+524          CALLrel ksedst+0 1
ksedmptracecb+15 CALLrel _ksedmp+0            C
_ksddoa+118          CALLreg 00000000             C
ksdpcg+143          CALLrel ksddoa+0
ksdpec+180          CALLrel ksdpcg+0 1966 6D7D208 1
__PGOSF3__ksfpec+11 CALLrel _ksdpec+0            0
8
_kgerev+77           CALLreg 00000000             7474210 1966
kgerec1+18          CALLrel kgerev+0 7474210 6DCE5EC 1966 1
6D7D260
peirve+465          CALLrel kgerec1+0
pevmCVTCN+346 CALLrel _peirve+0
pfrinstrCVTCN+36 CALLrel pevmCVTCN+0 6E6E604 71CE370 7160F0C
pfrrunno_tool+51 CALL??? 00000000
pfrrun+1834         CALLrel pfrrun_no_tool+0 6E6E604 6A3C010A 6E6E640
plsqlrun+1051 CALLrel _pfrrun+0            6E6E604
peicnt+179          CALLrel plsql_run+0 6E6E604 1 0
kkxexe+477          CALLrel peicnt+0
opiexe+4896         CALLrel kkxexe+0 6A2B9E54
kpoal8+1705         CALLrel opiexe+0 49 3 6D7E06C
_opiodr+977          CALLreg 00000000             5E 14 6D7E7CC
_ttcpip+1827         CALLreg 00000000             5E 14 6D7E7CC 0
_opitsk+1098         CALL??? 00000000
opiino+938          CALLrel opitsk+0 0 0 747ABC0 6DEFB14 D8 0
_opiodr+977          CALLreg 00000000             3C 4 6D7FBBC
opidrv+479          CALLrel opiodr+0 3C 4 6D7FBBC 0
sou2o+45            CALLrel opidrv+0 3C 4 6D7FBBC
opimai+237          CALLrel sou2o+0
OracleThreadStart@ CALLrel opimai+0
4+899
77E7D338 CALLreg 00000000

Re: Error, numeric or value error: character to number conversion error

Can someone please please tell me why I'm getting this error and what I'm doing wrong? It looks like a simple error, "numeric or value error: character to number conversion error".
My code is as follows:
string connectionString = WebConfigurationManager.ConnectionStrings["DEMO_TEST"].ConnectionString;
OracleConnection con = new OracleConnection(connectionString);
OracleCommand cmd = new OracleCommand("DEMO.PKG_LOCATION_TYPE.INS", con);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new OracleParameter("@P_DESCRIPTION", OracleDbType.Varchar2, 60));
cmd.Parameters["@P_DESCRIPTION"].Value = "Test_Description";
cmd.Parameters.Add(new OracleParameter("@P_NAME", OracleDbType.Varchar2, 6));
cmd.Parameters["@P_NAME"].Value = "Test_Name";
cmd.Parameters.Add(new OracleParameter("@P_LOCATION_TYPE_CD", OracleDbType.Decimal, 4));
cmd.Parameters["@P_LOCATION_TYPE_CD"].Direction = ParameterDirection.InputOutput;
con.Open();
try
cmd.ExecuteNonQuery();
catch
//In case of an error
finally
con.Close();
con.Dispose();
And I recieve the following error block:
Oracle.DataAccess.Client.OracleException was unhandled by user code
Message="ORA-06502: PL/SQL: numeric or value error: character to number conversion error\nORA-06512: at line 1"
Source="Oracle Data Provider for .NET"
DataSource="demotest"
Number=6502
Procedure="DEMO.PKG_LOCATION_TYPE.INS"
StackTrace:
at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src)
at Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
at System.Web.UI.WebControls.Wizard.OnFinishButtonClick(WizardNavigationEventArgs e)
at System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e)
at System.Web.UI.WebControls.Wizard.WizardChildTable.OnBubbleEvent(Object source, EventArgs args)
at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args)
at System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
********************************************************

Are the parameters in your procedure in the same order as they are created in this code? Oracle command works by position unless you change it to be BindByName.
Failing that you seem to have defined a parameter (P_NAME) to have a length of 6, and are then setting it's value to a string with a length of 9.
Also the in/output parameter is defined as type decimal. Is this correct? It is defined as InputOutput but you don't assign it any value.
If these suggestions don't help then perhaps if you post the stored procedure you might get some more ideas.
HTH
Lyndon

PL/SQL: numeric or value error: character to number conversion error in TRG

Hi,
I've got strange issue with one trigger which during update of table reports (DB is 9.2.0.8):
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "UDR_LOG", line 345
ORA-04088: error during execution of trigger 'UDR_LOG'but line 345 is:
END IF;
so its kind of strange
the code looks like
343 IF nvl(to_char(:old.PKD_ID),'''') <> nvl(to_char(:new.PKD_ID),'''') THEN
344 v_zmn := v_zmn || 'PKD_ID''' || to_char(:old.PKD_ID) || '''' || to_char(:new.PKD_ID) || '''';
345 END IF;
so its concatenation not to_number usage .error is triggered by update statement on any column .
I'm sorry I cant provide You with whole trigger code .
So if You could only recommend any investigation method that would be great .
Regards
Greg

Hi, Greg,
When there's an error in a trigger, the line numbers in the error messages are relative to the first DECLARE or BEGIN statement; often, that's a few lines after CREATE OR REPLACE TRIGGER. Post a few lines after what you already posted.
If you can't find the error, then create another table for testing this, and create a smaller trigger on that table, which does only enough to cause the error. Then you'll be able to post the complete trigger, and the code needed to re-create the problem.

ORA-06502: PL/SQL: numeric or value error: character to number conversion e

Hi,
when I do same thing in my procedure it throws below error but it works fine as annonymus block.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
CREATE TABLE test_table
(memberid NUMBER,
trans_date date);
DECLARE
v_num number(10,0);
v_text varchar2(100);
begin
v_text := '123456abcdef';
v_num := substr(v_text,1,5);
INSERT INTO test_table
(memberid,
trans_DATE)
VALUES
(v_num,
sysdate);
end;Thanks
Sandhya

Works fine as a procedure as well;
SQL> DECLARE
2 v_num number(10,0);
3 v_text varchar2(100);
4 begin
5 v_text := '123456abcdef';
6 v_num := substr(v_text,1,5);
7 INSERT INTO test_table
8 (memberid,
9 trans_DATE)
10 VALUES
11 (v_num,
12 sysdate);
13 end;
14
15 /
PL/SQL procedure successfully completed.
SQL> select * from test_table;
MEMBERID TRANS_DAT
     12345 20-MAY-10
SQL> create or replace procedure ins_test_table as
2
3    v_num number(10,0);
4 v_text varchar2(100);
5 begin
6 v_text := '123456abcdef';
7 v_num := substr(v_text,1,5);
8 INSERT INTO test_table
9 (memberid,
10 trans_DATE)
11 VALUES
12 (v_num,
13 sysdate);
14
15 end ins_test_table;
16 /
Procedure created.
SQL>
SQL> exec ins_test_table;
PL/SQL procedure successfully completed.
SQL> select * from test_table;
MEMBERID TRANS_DAT
     12345 20-MAY-10
     12345 20-MAY-10

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

Packed Number Sign Format to Ascii equivalent java program

Hi
I have a requirement to convert the packed Number Sign Format(usually used in MainFrame Platforms) to Ascii equivalent .
please help me out with java code or steps to be done to achieve these task
thank's
habeeb
[email protected]
[email protected]

Already answered in other thread.

ORA-06502: numeric or value error: character to number conversion error

I met the following error when I ran Donald's PL/SQL function to_number_or_null. Could somebody here help me find the resolution? Thanks!
SQL> create or replace FUNCTION to_number_or_null (
2 aiv_number in varchar2 )
3 return number is
4 /*
5 to_number_or_null.fun
6 by Donald J. Bales on 12/15/2006
7 An errorless to_number( ) method
8 */
9 begin
10 return to_number(aiv_number);
11 exception
12 when INVALID_NUMBER then
13 return NULL;
14 end to_number_or_null;
15 /
Function created.
SQL> select to_number_or_null('A') from dual;
select to_number_or_null('A') from dual
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "CAROL.TO_NUMBER_OR_NULL", line 10

Only INVALID_NUMBER exception is handled and also VALUE_ERROR should be handeled. You can resolve it by handling VALUE_ERROR exception or by adding WHEN OTHERS as I did in following example.
SQL> create or replace FUNCTION to_number_or_null (
2      aiv_number in varchar2 )
3      return number is
4     /*
5     to_number_or_null.fun
6     by Donald J. Bales on 12/15/2006
7     An errorless to_number( ) method
8     */
9 begin
10     return to_number(aiv_number);
11     exception
12     when INVALID_NUMBER then
13      return NULL;
14     when OTHERS then
15      return null;
16     end to_number_or_null;
17 /
Function created.
SQL> select to_number_or_null('A') from dual;
TO_NUMBER_OR_NULL('A')
----------------------With kind regards
Krystian Zieja

Floating point Number & Packed Number

Hai can anyone tell me what is the difference in using floating point & packed Number .
when it will b used ?

<b>Packed numbers</b> - type P
Type P data allows digits after the decimal point. The number of decimal places is generic, and is determined in the program. The value range of type P data depends on its size and the number of digits after the decimal point. The valid size can be any value from 1 to 16 bytes. Two decimal digits are packed into one byte, while the last byte contains one digit and the sign. Up to 14 digits are allowed after the decimal point. The initial value is zero. When working with type P data, it is a good idea to set the program attribute Fixed point arithmetic.Otherwise, type P numbers are treated as integers.
You can use type P data for such values as distances, weights, amounts of money, and so on.
<b>Floating point numbers</b> - type F
The value range of type F numbers is 1x10*-307 to 1x10*308 for positive and negative numbers, including 0 (zero). The accuracy range is approximately 15 decimals, depending on the floating point arithmetic of the hardware platform. Since type F data is internally converted to a binary system, rounding errors can occur. Although the ABAP processor tries to minimize these effects, you should not use type F data if high accuracy is required. Instead, use type P data.
You use type F fields when you need to cope with very large value ranges and rounding errors are not critical.
Using I and F fields for calculations is quicker than using P fields. Arithmetic operations using I and F fields are very similar to the actual machine code operations, while P fields require more support from the software. Nevertheless, you have to use type P data to meet accuracy or value range requirements.
reward if useful

ORA-06502: PL/SQL: numeric or value error: character to number conversion

Hello,
I am new to Oracle Apex so I decided to read and do the tutorials that are on the apex.oracle.com site.
Now I am at the tutorial 6: How to Work with Check Boxes of the Advanced Tutorials.
At a certain point you have to add a new radio button.
At the Item Source Value you have to add SELECT 'Y' FROM DUAL WHERE :P2_LIST_PRICE*0.75=:P2_MIN_PRICE.
But when I try to create the item, I keep getting the following error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Error creating item.
Does anybody know what could be the problem.
Thanks in advance.

CREATE OR REPLACE PROCEDURE xxbb_query (
p_branch_code XXBOB_HRMS_APPRAISALS_DATA.Branch_code%TYPE,
p_PERIOD_NAME XXBOB_HRMS_APPRAISALS_DATA.PERIOD_NAME%TYPE
IS
emp_refcur SYS_REFCURSOR;
v_deposits XXBOB_HRMS_APPRAISALS_DATA.deposits%TYPE :=0;
v_branch_code XXBOB_HRMS_APPRAISALS_DATA.branch_code%TYPE:=0;
p_query_string VARCHAR2(500);
BEGIN
DBMS_OUTPUT.PUT_LINE('Hello' || ' ' || '...');
p_query_string := 'SELECT Avg(deposits) Dep,branch_code FROM XXBOB_HRMS_APPRAISALS_DATA WHERE ' ||
*' Branch_code = :branch_code '||*
*' AND PERIOD_NAME = SubStr( :PERIOD_NAME ,1,4))||(SubStr( :PERIOD_NAME ,InStr( :PERIOD_NAME ,'-',1,1)+3,5)) ' ||*
*' group BY SubStr(PERIOD_NAME,5),BRANCH_CODE ';*
DBMS_OUTPUT.PUT_LINE('Hi' || ' ' || '...');
OPEN emp_refcur
FOR p_query_string USING p_branch_code,v_p_PERIOD_NAME,v_p_PERIOD_NAME,v_p_PERIOD_NAME;
-- DBMS_OUTPUT.PUT_LINE('----- -------');
Here I m passing a string variable to pass the select statement for the ref cursor.
There seems some problem in the substr conversion in the statement.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
But when i run as a independent staement passing real values in the place of placeholders
i get the result right.
The *:PERIOD_NAME* format is *'Jan-2009-10'* .
And I need to pass the *:PERIOD_NAME* to the query as *'Jan-09-10'*
Pls suggest.
Edited by: user7391361 on Jul 23, 2009 8:28 AM

How to find hp care pack number hw/sw product number

how to find hp care pack number and hw/sw product number pls advice
This question was solved.
View Solution.

Contact HP directly.
This is the HP Consumer Global support forum and not a sales unit of HP.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Number conversion

hi,
1.I have a doubt.if i do arithmetic operation on two floating point numbers(data type F) and assign it to a packed number(P) how will it affect the final result.
2.Another question how can i convert a negative packed number into positive packed number.
Please answer.
thanks and regards,
Mahesh

hi
good
check this
This link will give detail descrition abt datatypes.
http://help.sap.com/saphelp_webas620/helpdata/en/fc/eb3434358411d1829f0000e829fbfe/content.htm
Data Type Code Length Description
b 1 1-byte integer
C 1 - ? Character string
D 8 Date (yyyymmdd)
F 8 Floating point number
I 4 4-byte integer
N 1 - ? Digits-only character string
P Binary Coded Decimal (packed) number
s 2 2-byte integer
T 6 Time (hhmmss)
X 1 - ? Raw data
INTLEN tells us the number of bytes used by this field; DECIMALS the number of decimals for packed and floating point numbers.
reward point if helpful.
thanks
mrutyun^

Settings for material number conversion not found

"Settings for material number conversion not found"
This is the error that came out. I was everytime i try to access the activated business content 0material, the system comes up with this error. Please help me with this! Thank you!
-Peter

Hi Peter,
try oss note 555675, it tells you to use transaction OMSL.
regards
Siggi
Message was edited by: Siegfried Szameitat

Packed number conversion

Similar Messages

Maybe you are looking for