Packet Data connection and Wireless Connection at ...

I use Nokia for Exchange to push my mail this from 06Hr00 until 22Hr00 on a Nokia N82 latest firmware (same problem on the first firmware)
When this connection is open i'm not able for example surf the internet through a wireless acces point at the same time. If a disconnect the packet data connecting everythings works fine.
The error message i receive is "Web: No gateway reply"
Is it possible to have to different kinds of data connection open??
Message Edited by gip9190 on 26-Jan-2008 07:43 AM

You are welcome. I hope it will help you make the right decision. We are looking forward to welcome you in the world of S60v3 smartphones

Similar Messages

  • How to set up WRT54GS so the wired and wireless connections both work?

    I have a DSL line in to a Motorola modem.
    The modem is connected to the WRT54GS with an ethernet cable.
    When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet.  I have 3 computers plugged in, but none of them connect via Ethernet..
    Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
    Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity.  When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device.  I don't want to change this setting because I want to use the router for the wireless capability.  Besides which, I have more than one computer to connect to the internet.
    How come I cannot just plug in and go?  
    My firmware version is v2.07.1. 
    I don't know how to find out what hardware version I have.
    Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
    Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"  
    I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
    Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
    Thanks in advance.

    Just click this link.

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both result in stuttering during video airplay to the ATV2.

    I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both still result in stuttering during video airplay to the ATV2.
    I have even bought a new Airport Extreme Router just to confirm it is not the router and it still didn't help.
    I have brought all items in the same room with wired connections and still same issue.
    I was thinking maybe ATV 3 might help since it has 2 wifi antennas and faster processor.
    Have tried everything I could think of.
    This was one of the main reasons I bought a Macbook Air for this airplay feature. Very frustrated.
    Any thoughts; any other suggestions would be greatly appreciated.
    Thanks

    Thanks for the suggestion.
    I also disabled Norton Firewall and restarted the Air and Now I'm able to use Air Play.
    I know that the Apple remedy said that to do that in the support article, but I totally forgot I had that enabled..
    It actually works. I can even stream to the Apple TV now through my MacBook Air.
    BTW, Go into setting under the ATV, and click on update...you'll see that there was another update avaialble for the last gen of ATV...
    It does have to restart twice..I guess once to download and and nother to apply.

  • Can psc2510 work connected and wireless at the same time?

    My PSC2510 all-in-one is connected to my desktop the old-fashioned way.  Can I get my laptop to print wirelessly from the same printer?

    I'm pretty sure that USB and wireless connections can work at the same time on this printer. Just make sure the same PC is not connected by both USB and wireless. The software will get "confused" as to which way to communicate with the printer.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • T43 and Wireless connection with ATT Uverse

    Hi geeks I am new. I have prob. I was having ATT DSL  and as I switched to ATT Uverse I have problem to connect my T43 and T41 laptops to connect via wireless connection.
    I have intelPro 2200bg wireless card(internal). I read the forums and tried evrything. Finally I went to Intel wireless card update driver website and downloaded a file. ONLY T43 got connected by wireless But on the taskbar the radio shows as Off. I wonder is it connected via my bluetooth or How  and how to SWitch ON the  radio on. I went and tried to switch on Wireless radio into ON mode???
    Please help geeks , as I have to fix my T41 too to connect to the ATT Uverse. The ATT tech came and he too could not fix it. When I connect via Ethernet to the router  I get 11.97 Mbps speed but wireless connection is the problem. I downloaded, thinkvintage toolkit,  a software to  find interference form cordless phone, etc, etc nothing worked. 
    Somehow my T43 got wireless connection. Not sure will it connect again if I switch it off.
    I know little that the WPA encryption needs something diff the WEP encryption. Because my both T41 & T43 was able to wirelessly connect to my DSL router/modem.
    If someone of you can throw some  light it would be a great help else I may have to buy  flash drive wireless card but I dunt want to occupy my flash drives as they are occupied by webcam & external speaker. Dunt  like to put a flash drive hub.
    Thanking you in advance.
    Jas

    Update on T43:
    After formatting with Windows 2000 setup disk,  when I used the IBM sent R&R disk I did not get the previously got "kernel_data_error BLUE system error screen. All 6 R&R original CDC got loaded into RAM and I am in the process of getting my system back to Factory State ( Just XP and IBM tools).
    I would like to know is it OK to keep IBM Access Connection or Not ? I am kinda scared to remove it ; Also Since bought this T43 , now and then the Microsoft Windows auto updates did make my system from XP-Service pack 2  --> and a year ago it automatically installed Service pack 3 automatically.  I just thought to mention this thinking can this be a problem in making my 2200Bg wireless  to fail with Uverse ISP modem? as with the same setup/configurations the my wireless was able to connect using WEP key encryption to my previous AT&T DSL router.  And Uverse Router requires WSP encryption per AT&T.
    Other thing I worried was can my uninstalling Spybot and then going to McAfee Sw would have caused anyproblem to make my Wireless go wrong with UVerse, bcoz once i had problem and the McAfee tech support remotely connected to my T43 and said my registry is messed up and they have to fix it to make the McAfee work Properly.
    Later when i got Uverse an AT&T friendly tech suggested that i better switch to AVG instead of McAfee; as McAfee uses too much of ram and it makes the computer to act slow and that may looks like the internet connection speed is slow. 
    ..Anyway  I am sharing these info to give as much I know thinking it may help people with same problem or the T$# geeks to think of solutions.
    George, Now that i think i have made my load back to factory state and wanna see will the 2000 bg wireless will work or not before Windows starts its auto upgrade to Sv.Pk 3 version ( thinking any interference or glitch or something of that nature).
    Also i am thinking of installing the new ThinkVintage tool; IS it OK?
    If u get a chance please throw some light, would greatly appreciate.  I will give an update if Intelpro wireless adaptor 2000bg works with AT& T uverse transition ( from DSL).
    Mean while George where to you suggest me to buy parts/upgrades for this T43 (like better modem, more RAM etc. as i think like eBay or craiglist may give better pricing but i am not sure is it risky or not to buy )
    If nothing works this time i am thinking of buying flash drive wireless card form best buy - please advise.
    Thank you George, I am not a computer  geek but i am happy that this forum exposed me to many smart  thinkpad users and trouble shooters. Please give advise whenever u feel u got some solutions.
    Thanks, again,
    Jas
    P.S. soory if my replies are long; but i thought to give more info so that u can get bettter idea of the real problem or needs of mine

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Wusb11 only connecting to wireless connections for 5 mins at a time??

    My wireless reciever wusb11, will only connect to wireless connections within 5 mins of plugging it in. If i unplug it then plug it back in "I get another 5 mins of internet then it drops all connections and says no networks in range.

    first off , update the drivers of the WUSB11 .. and try changing the following settings on the wireless router /  AP ..
    channel - 1 or 11
    security mode - wpa
    beacon interval - 50
    RTS and fragmentation threshold - 2304

  • My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

    My iPhone 5 will only connect and keep connected if I am about 5feet away from my router. It also will not pick up other wifi sources and will drop Bluetooth. What can I do to solve this problem?

    Are there any other wireless devices that might cause interference?
    Also are there any nearby Wi-Fi networks that might have the same name as yours? It amazing how many Linksys Wi-Fi networks are out there.

  • What is the diff.b/w UD connect and DB Connect

    Hai,
              can any one expalin diff.b/w UD connect and DB connect...
    Regards

    Hi Lakshmi,
    please check the threads below
    UD and DB Connect
    DB connection,UD Connect Document
    Also this
    http://help.sap.com/saphelp_nw04s/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
    hope this helps!
    Regards
    Chandru

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • Internet works, but I have an exclamation mark instead of AirPort connection and cannot connect to my WiFi.. PLEASE HELP!

    Internet works, but I have an exclamation mark instead of AirPort connection and cannot connect to my WiFi.. PLEASE HELP!

    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, restart the computer and try again. If there's no change, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click  Applyand test.
    If there's still no connection, and if you have control of the router, compare its settings to Apple's recommendations. Some third-party routers may be incompatible in 802.11b/g/n radio mode. Try setting the mode to 802.11n only.

  • Wifi connecting and disconnecting, connecting and disconnecting . . . .

    Hi
    My dad has just inherited the iPhone 3G from my brother, and is having trouble connecting to the home wifi.
    I also have the same phone, and have no problem connecting. before my brother gave the phone to my dad, he also had no problem connecting with the home netowork.
    What is most confusing is that the phone recognises the network, automatically connects to it, and within seconds, it disconnects. Then goes through the same process again, and again and again . . . . . . .connecting and disconnecting, connecting and disconnecting . . . . .. etc.
    It's like flicking a switch on and off - non stop.
    I am very technically inept, so would be very gratefull of some insight.
    Thanks

    I think you have the wrong forum. This is the ThinkCenter forum, for desktop systems, you have a Thinkpad?

  • Trouble with wireless switch (rfkill) and wireless connectivity.

    Hello, this is my first message in this community so please bare with me if this message should be in the newbie part; but I think it's better fitted here. Other than that, I'm glad to be here .
    After quite some time in Fedora I'm coming to Arch and I must say I'm delighted, so I wanted to use it in my laptop too which was running an old version of Fedora.
    The laptop is an Airis N930 (about 5 years old) with a RaLink RT2500 wireless adapter which worked well in Fedora 11 but I'm having some trouble getting it to work in Arch. The problem is that the connectivity switch in this laptop is kind of a software one: in Windows it's compulsory to have a program which came in the drivers disk so that when that button is pressed (think of it as another key in the keyboard) the wireless connectivity is turned on and the indicator led lights up.
    For a Linux based system there's no such program (I think) but the behaviour seems to be different in newer and older systems (I've tried Fedora and Ubuntu recent live environments and the behaviour is the same as in Arch). In Fedora 11 it just works everything's unblocked by default, in Arch the hardware block seems to be on and I don't know of any way to unblock it:
    root@laptop ~ $ ifconfig wlan0 up
    SIOCSIFFLAGS: Operation not possible due to RF-kill
    root@laptop ~ $ rfkill list
    0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: yes
    root@laptop ~ $ rfkill event unblock phy0
    1298671843.804446: idx 0 type 1 op 0 soft 0 hard 1
    Pressing the wireless connectivity button doesn't produce any event... Does anyone know what can I try or how to remove the hard block? Could it be related to newer kernels?
    Thank you very much for your time, any fixes, workarounds or ideas are welcomed.

    Thank you for your tips lamegaptop. I already have linux-firmware installed and I'm using the supported kernel module for the card (it's a PCI one):
    06:01.0 Network controller: RaLink RT2500 802.11g (rev 01)
    Loaded modules for it:
    rt2500pci 12420 0
    rt2x00pci 3890 1 rt2500pci
    rt2x00lib 24866 2 rt2500pci,rt2x00pci
    mac80211 178404 2 rt2x00pci,rt2x00lib
    cfg80211 120337 2 rt2x00lib,mac80211
    eeprom_93cx6 1004 1 rt2500pci
    Rfkill is installed too, the output I posted in the first post belongs to the commands I entered in the Arch system. In Fedora rfkill always reports both blocks to be off.
    As the Fedora system is running a 2.6.30.10 kernel I tried to run some tests using the LTS kernel (it's a 2.6.32.X right now) in the Archboot live environment, the output of "rfkill list" changed as seen below:
    $ rfkill list
    0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    $ rfkill iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    wlan0 IEEE 802.11bg ESSID:off/any
    Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    $ ifconfig
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:264 (264.0 b) TX bytes:264 (264.0 b)
    $ ifconfig wlan0 up
    $ ifconfig
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:264 (264.0 b) TX bytes:264 (264.0 b)
    $ rfkill list
    0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: yes
    $ ifconfig wlan0 up
    SIOCSIFFLAGS: Operation not possible due to RF-kill
    This behaviour was the same when running the default Arch kernel in Archboot. I'm thinking in extracting the kernel configuration from the Fedora kernel and use it to build a new one and see if it helps, although I'm not sure where the problem may be.

Maybe you are looking for