Packet Data Issue & Some Icon

Hi ! I had a problem with my connections . I'm using sun network,for Nokia 5300, but since I changed my simcard, I got a problem with my connection already, im still using a Sun Simcard, but different number, I checked the configuration setting & it's the same , nothing's changed , but the error always say ' PACKET DATA CONNECTION, NOT AVAILABLE' . how will fixed it ? is it depends also in my SIM CARD ? I double check also if my Sim is GPRS activated, & my network says its already activated.
Also, everytime I made a call or if someone calling me, there's an icon beside the BATTERY ICON , & I cant explain what is that, that's the first time I saw it, its a color yellow, @ its like an inverted letter Z . it affects my voice to someone im talking with .
hope you can heLp me with this ASAP . thanks ALOT
Jessica Yvonne Ferrer
Solved!
Go to Solution.

Hi Sunseg
Thank you for posting and welcome to Nokia Support Discussions! 
Resetting the factory settings of the phone would mean that all the personalisation or customization made on the phone will be reset back to its default settings. You received "packet data error" beacuse the GPRS/APN settings of your phone was removed. What you can do is to request the settings from your network provider or you can configure it manually.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Similar Messages

  • N86 Poor Battery - Packet Data Issue

    Hi
    I have owned my Nokia N86 since July 09; what a great mobile phone apart from its appalling battery life. The tech specs say 15 days but I only get 3 days standby at most even as a very very light user. Often the battery life will drop instantly from ½ bars to zero when I open a GPS app.
    I have set up all the power saving options mentioned in other thread but I have identified an issue with the battery draining Packet Data from Vodafone. I end packet data, by holding the red key, each time I close the sider & the packet data symbol below the signal strength bar goes away. However, when I open the slider & unlock the phone I notice the Packet Data is turned back on.
    My Packet Data is set up for 'when needed'; unlocking the slider does not mean I need it! Has anyone found a way around this & is my battery life as bad as other peoples? I can’t afford to own a phone which will die on me just as I need to make an urgent call.
    Cheers
    As an aside when will Nokia finally update its firmware so when I close a program it actually closes & does not go into the background wasting battery life!

    PROBLEM IDENTIFIED BUT NOT SOLVED.
    I took my N86 into a Nokia Care Center and found the source of my poor battery life and why packet data keeps turning back on after I turn it off:
    'Vodafone Internet GPRS keeps reconnecting automatically as it is set for 3G. Other mobile networks allow you to turn 3G off when not needed.'
    Found by: settings-connection-destinations-internet-vodafone internet GPRS.
    So the ball of blame is now in Vodafones court to change their software & let users deselect 3G when required. Nokia still need to fix the firmware so battery drain/gauge is more accurate & linear.
    Any work arounds would be appreciated as at the moment this issue has reduced my battery life by ~80%.
    Cheers

  • Issue regarding condition pricing date as system date for some condition types in sales order

    Hi
    I have already created a sales order on 30.04.2014. Today I am adding new line item to sales order in VA02 transaction. in this order new line items condition pricing date for conditions JEX2,JECX should show as 12.06.2014. But currently it is showing as 30.04.2014. I need condition pricing date as system date for above conditions.
    Regards
    prashant

    Hi
    When I am changing pricing date VBKD-PRSDT in sales order header . It is changing the condition pricing date for all. Sales order is created on 04.06.2014. I have added line item 150 on 14.06.2014.
    After adding line item 150 , there I have changed the pricing date as 14.06.2014. in sales A tab of item 150. But still it is taking from Sales order header date as 04.06.2014 for all conditions. But my requirement is for line item it should take as system date for some conditions like JEX2,JECX& JA1Y but for other conditions it will take as Order creation date. Please suggest. I have also attached screen shot below. please go through it.
    Regards
    PK
    Sales order header change mode VA02
    Here pricing date VBKD-PRSDT = 04.06.2016
    Item change mode
    I have added new line item 150 on 14.06.2014
    Changed the condition pricing date to 14.06.2014 & saved
    After saving I have gone to Va02 screen of line item 150
    & there I have gone to condition pricing date field from item condition tab
    for JEX2 condition type but still here condition pricing date is showing as
    04.06.2014 as below.
    Condition pricing date
    My requirement is like this
    For some particular conditions like JEX2  condition pricing date will take as system
    date instead sales order creation date when I will add a new item 150 on
    14.06.2014.but for other conditions it will show as order creation date for the
    same line item 150 .

  • N73 packet data

    Normally above the packet data icon on the left of the screen there is a aerial like icon,for some reason it is now showing a E with no loss of any connectivity ? not shown in handbook any ideas what it is.

    "E" means that you are connected to an EDGE data network.
    It has probably changed because your network operator has invested in new a data network.
    Even though it's there you are not being charged anything. You will only use data when you use web, wap or email or any other program that requires a data connection.

  • Data Issue

    Hi All ..
               We are facing one data issue DSO.  One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try  for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
             In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
            Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field.  but we are following one to one mapping in update rule.
    Please help me on this. i need to hev a correct id for record.
    Thanks ,
    Prem.

    You can use selective deletion to delete the record with Project ID = GE1234
    Load the data till PSA
    Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
    check in further data targets also for mismatch of data
    Hope it helps,
    Naveen Vytla
    Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

  • IMac display issues: black icons and folders, doubled up files in finder windows, programs won't update

    HELP!
    I'm hoping someone can help with my iMac 27" purchased in 2010.  From a previous discussion I started a year ago, I have had virtually nothing but trouble with it.  After the internal hard drive crashing, I was able to install OS X on an external drive and used it for a good 8 months to drive my iMac and I took it to an expert who has replaced it with a 3tb HDD, but at some point the display has gone crazy.  I am not certain if it is hardware, i.e. graphics card or video but I'll describe the symptoms and add some pics to see if anyone has seen this before and knows what the problem may be.
    1.     90% of the screen was covered with white with just a portion of the desktop showing through.
            (This happened when I tried to reinstall OS X on the old HDD and the new one, but didn't happen when using OS X install disc)
    2.     Files, folders, photos and some icons on the dock go black
    3.     Files and photos double up when in Finder.  When I'm viewing photos, it shows them but all the previous panes and the photos are jumbled behind the
            photos.
    4.     Anything I open in Preview is completely black, but ColourSync Utility opens everything fine.
    5.     Programs won't update.  They will download onto my iMac but won't update.  Some say, because I don't have OS X 10.6.8 others just won't open.
            Including Google Chrome, opens with two tabs open but when I open a third tab the rainbow wheel just turns.  Skype won't open just gives a failure
            report.
    6.     10.6.8 Update Combo downloads but when I restart the screen is covered in white - as in 1. and I have to reinstall OS X 10.6.2 to get the screen to               clear but then all the above problems continue.
    7.     Sometimes videos don't display in Youtube, or the entire page other than the video player is covered in rainbow lines.
    8.     Some buttons are blacked out on selection pages, i.e. system preferences, or saving screens
    9.     Photos opened in FB go upside down and flicker all over the page as my mouse runs over them.
    10.   Photos won't upload into internet editing programs.
    I can't find anyone who has had the same issue in all of the discussions I've looked at, but it sounds like I have a video problem, but I wondered if it might be a software problem with flash or something.  Or I have something malicious on my computer.
    I also have an iphone 5 that faulted with the iTunes and USB icons and won't fix after trying one of those R-Sims, and I wondered if somewhere along the line it may have even had a virus/trojan/malware that has infected my external drive and then my internal drive.  A reason I have thought that is because I have used my daughter's MacPro laptop and plugged in my external drive and I noticed the windows in hers were starting to do the same thing.
    And on top of all that, my fans didn't work for over a year and I had to place an external fan at the back of the computer or it would overheat and shut down, but after resetting the SMU it started working again, but it is very noisy. I have tried to download SMC Fan Control and although it downloads to the HDD, it won't open.
    Sorry its such a long post, I do hope with all of this information someone can help me.
    Thanks so much.

    HI and Welcome to Apple Discussions...
    *Soon after, I installed Quake Wars, L4D 1, 2, Mass Effect 2, Need For Speed: Undercover, Mozilla Firefox and *Sophos Enterprise AV*. Approximately a week after installation, I began to experience malfunctions varying greatly*
    Macs get grumpy when running anti virus software. Disable or completely uninstall Sophos A/V and see if that makes a difference. A/V software on a Mac will slow the drive down more and more as time goes on.
    Also, check the vendor sites for each 3rd party software you installed to make sure they are compatible with 10.6.x
    The "hard reboots" are a result of the system freezing due to incompatible or outdated software.
    Carolyn
    Message was edited by: Carolyn Samit

  • Print Date issue in Dunning Correspondence

    Hi,
    I have an issue with Print Date in Dunning correspondence. The dunning proposal and activity run has happened. The correspondence printing will fetch the accounts from the database as per the print date.
    1. I would like to know where and how the dunning activity data stored?
    2. Where and How the Print date assigned for accounts which helps FPCOPARA to retrieve accounts on that particular date?
    Please HELP

    Hello Joe,
    I still have the issue with this print date.
    I have given only cores type and as u said the real print.
    when i checked the corrhist for a particular CA, different times different future date has come.
    For eg: date is issue: 12/01/2009 (mmddyyyy) printdate is 12/20/2009.
                                       10/01/2009                                         10/15/2009
    like this, many cust have this issue.
    why this prind date for some CAs are different or future dates?
    where the settings for this print date will be?
    Because of this, on a particular day all the dunned CAs are not picking up for Correspondence printing. these excepted CAs will come on another future day printing.
    please share some ideas to solve this issue
    Regards,
    Sunitha

  • OBIEE 11g .0d date issue

    Hi,
    I create an initialization block to populate a couple of repository variables.
    After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
    I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
    Workaround Ref : The .0d date issue
    Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

    Have you gone through my suggestions at the below links?
    The .0d date issue
    Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
    You have to do it where ever you are using that rep. variable not in the init block.

  • Reporting Services 2012 - "Database is up to date, but some sites are not completely upgraded"

    Running SharePoint 2010 SP1 (Feb-Mar 2012 CU)
    Is there any official word from Microsoft regarding the issue with SQL Server Reporting Services 2012 for SharePoint where 2 of the reporting service application databases show "Database is up to date, but some sites are not completely upgraded".
    ReportingServiceDB  -  Database is up to date, but some sites are not completely upgraded
    ReportingServiceDB_Alerting  -  Database is up to date, but some sites are not completely upgraded
    I'm building the new Reporting Services into a new DEV environment and I'd like to know what the official word is from Microsoft.  Is Reporting Services 2012 ready for production?
    Thanks!

    Hi mikea730,
    Thanks for your psot.
    Based on my research, I found a similar thread about this issue at Microsoft Contect site. For more information, please see:
    http://connect.microsoft.com/SQLServer/feedback/details/721067/database-is-up-to-date-but-some-sites-are-not-completely-upgraded
    It might be a known issue of SQL Server 2012. I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you
    in a more efficient manner.
    Regards,
    Bin Long
    Bin Long
    TechNet Community Support

  • Data issue in IDOC

    Hi Experts,
    I do the following steps to generate IDOC for Passing over payroll data to ADP.
    I run the payroll and Run the coombined Payroll export and go to WE05 to chk for idoc.
    I have some data issue here. I need the IDOC to Pick 0167 infotype information. For few employees if does generate but for few it does not generate the info in IDOC. Please help me as to how to navigate this problem as iam very new to payroll and as weel as IDOc's.
    Thanks
    Chowdary

    Hello,
    Please try your luck with this.
    Go to BD87 see the error message why this idoc is not moved. some time retrying will you success.
    else also you find the problem in the error message.
    thanks

  • I am trying to organize thousands of images in aperture.  The dates on the old scanned images is all 2008, when I started importing them.  When I change the date in aperture some of them hold the modified date and some revert to 2008.  Any ideas?

    I am trying to organize thousands of old images in aperture.  Aperture dates them all in 2008, when I started this project.  When I change the date in aperture some of them hold the modified date and some revert to 2008.  Any ideas?

      I just tried a test library, re-imported fresh images from a hard drive, and the date changes still revert.
    So neither your external drive nor your Aperture library are to blame.
    What do you mean test in a different user acct?  Would it be a good idea to uninstall and re-download aperture 3?
    Appreciate all your help.
    I meant the trouble shooting procedure described here:  Isolating an issue by using another user account
    To test, if some settings in your user account are faulty or preferences files corrupted, it helps to create a new user account from the "Users&Groups" System preferences. With a brand new user account you can see, if something in your current account is causing this.
    Should you see, that Aperture is not even working from a new and clean account, I'd reinstall Aperture, and if need be the Operating system.  Are you using any plug-ins?

  • VPD date issue between 10.1 and 10.2 databases

    I have uncovered an issue today with VPD against date fields. The issue came up at a client site on a 10.2 database. When I got back to the hotel and tried this on my own database, which is 10.1, I got no issue and everything worked ok.
    Therefore, I am asking if anyone is able to try out the following for me on different Oracle databases and platforms and let me know whether it worked for you or not. I'd like to compile a list of database versions and platforms on which the issue occurs.
    Step 1: create this table as a user
    CREATE TABLE TST_DATE AS (
    SELECT 1 PERSON_UID,
    Trunc(SYSDATE) BIRTH_DATE,
    To_Char(Trunc(SYSDATE), 'DD-MON-YYYY') CHAR_DATE,
    123456 TAX_ID,
    'Smith, Michael B.' FULL_NAME FROM dual);
    Step 2: grant select rights on the table
    GRANT SELECT ON TST_DATE TO PUBLIC;
    Step 3: switch your login to SYS and run this script:
    CREATE OR REPLACE FUNCTION F_CHECK_ITEM_TST(p_object_schema in varchar2, p_object_name varchar2)
    RETURN VARCHAR2 IS
    V_PREDICATE VARCHAR2(2000) := '1 = 2';
    BEGIN
    RETURN(V_PREDICATE);
    END F_CHECK_ITEM_TST;
    Step 4: As SYS, run this to grant access rights over the function
    GRANT EXECUTE ON F_CHECK_ITEM_TST TO PUBLIC;
    Step 5: As SYS, run this to enable the policy
    BEGIN DBMS_RLS.ADD_POLICY(
    OBJECT_SCHEMA => 'DRAKE',
    OBJECT_NAME => 'TST_DATE',
    POLICY_NAME => 'SecByTST',
    FUNCTION_SCHEMA => 'SYS',
    POLICY_FUNCTION => 'F_CHECK_ITEM_TST',
    STATEMENT_TYPES => 'SELECT',
    POLICY_TYPE => DBMS_RLS.DYNAMIC,
    SEC_RELEVANT_COLS => 'BIRTH_DATE',
    SEC_RELEVANT_COLS_OPT => DBMS_RLS.ALL_ROWS);
    END;
    Note: in the above policy change the OBJECT_SCHEMA name to be the name of the user who owns the table you created in Step 1
    Step 6: Go into Discoverer Admin and import the table as a new folder.
    Be sure to uncheck the "Date hierarchies" box and set "Default aggregate on data points" to detail. Grant access to any user.
    Step 7: Using Desktop or Plus, log in as that user then try to query the folder with the date not included, there should be no problem.
    Step 8: Now try to query with the date included
    On my 10.2 database I get ORA-24334: no descriptor for this position. This happens when logged into Discoverer as the table owner, EUL owner or any other user. However, when logged into Discoverer as SYS which is exempt from all VPD policies, there is no error when the date is included.
    We tried this in Discoverer Desktop, Plus and Viewer with the same results in all three. We can successfully query the table from SQL*Plus, SQL Developer and TOAD.
    There also seems to be no issue at all with the 10.1 database so there seems to be an issue between Discoverer and the 10.2 database.
    What do you think?
    P.S. to cancel the policy use this script when logged in as SYS:
    EXEC DBMS_RLS.drop_policy(
    OBJECT_SCHEMA => 'DRAKE',
    OBJECT_NAME => 'TST_DATE',
    POLICY_NAME => 'SecByTST');
    This same information is available on my blog in a more readable format here:
    http://learndiscoverer.blogspot.com/2006/12/vpd-date-issue-between-101-and-102.html

    Hi Rod
    Well don't you just love Oracle. Obviously, whatever tests were done for certifying Discoverer against the 10.2 database did not include checking VPD policies. This merits a blog entry from me.
    Your workaround for V_PREDICATE VARCHAR2(2000) := 'BIRTH_DATE=TO_DATE(''01-JAN-0001'')'; works. However, I had to write a new function to do this because my real function was trapping about a dozen items at the same time, some dates, some numbers and some varchars - exactly the way that the Oracle example code shows it in the 10.2 database manual.
    So what I did was to create a new function that only handles dates and added a dedicated policy that works with only that function. Unfortuately, because I have many dates to manage, I was unabe to hard code the BIRTH_DATE so here is what I did:
    V_PREDICATE VARCHAR2(2000) := 'SYSDATE = TO_DATE(''01-JAN-0001'')';
    This works perfectly and Discoverer stopped complaining. It just has two policies on the same table for different data items. Isn't VPD cool? I'm hooked.
    I really appreciate your time and effort on this. Now, let's see what Oracle support make of the issue because I raised a service request last night. No reply yet I'm afraid.
    Best wishes
    Michael

  • "Subscribe to Packet Data First" (Bit of feedback)

    I recently bought a Nokia 6021, which offers Bluetooth connectivity and E-mail function (send and retrieve). I got some setup advice Forum members.
    Bluetooth was easy to set up, and I now use the phone in the car with a handsfree unit, which clips on the sun visor.
    Very satisfactory.
    E-mail was (much) more difficult to set up.
    I kept getting an error: "Subscribe to Packet Data First".
    It turned out that the fundamental problem lay in the fact that Vodafone Support had incorrectly given me the settings for a "Contract SIM card" when in fact I operate mine as a "Pay-As-You-Talk SIM card".
    Specifically they got me to insert "Internet" as one of the Bearer Settings parameters - when it should actually be "pp.vodafone.co.uk". "pp" indicates PrePaid.
    So watch that point, all you PAYT Users!
    It wasn't a 6021 problem ... it was a question of identifying the right kind of SIM card.
    Incidentally, when the 6021 retrieves e-mails, if the message is too big (I think above 100k), it fetches the message header, with sender's ID, etc., so that you can identify who has e-mailed you even if you can't read their message/file. Suits me perfectly.
    Thanks for the advice I got from Forum members.
    Best regards - Charles

    You need to contact your Operator and get the Data plan activated ...

  • CS4 Extended - Some Icons missing

    Hi there,
    there are some icons missing regarding the control if the opened files ( see attached image link ).
    I tried reinstall but without success.
    http://img383.imageshack.us/my.php?image=iconsle0.jpg
    ANy ideas?
    regards,
    malojo

    I had the same problem. It also caused some issues in CS3 with the selection tools.
    Remove Nik software if it's present in your plugins folder. For me the specific folder that fixed it was named "penpalette." Once I deleted this the icons came back and the program worked much better and more smoothly.

  • My Sites database status changed to "Database is up to date, but some sites are not completely upgraded."

    We have a brand new SharePoint 2013 farm which we just put into production. As users have begun creating their My Sites, the My Sites web application database changed to a status of "Database is up to date, but some sites are not completely upgraded."
    Huh?
    Prior to deploying to production, we had some test users that had created My Sites, and everything was fine. The database status was "No action required".
    Anyone know why the creation of My Sites would cause the database status to flip to this warning?

    HI Kleung,This seems to be that after the patch upgradation some of the sites are not upgraded properly.Please check the below thread that exactly talking about the issue that see in your enviornment.
    http://expertsharepoint.blogspot.de/2014/03/data-base-is-up-to-date-but-some-sites.html
    First of all, to identify what site collection doesn't got upgraded.
             Run: stsadm.exe -o localupgradestatus > upgradestatus.txt
    or
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures  (Run from one of the WFE server)    
    In below as you see, there no site collection that need upgrade. If you have any, you can identify
    them by searching by word "Needs upgrade" in this file.                  
    Secondly, run the command in the Power Shell:
    For resuming the upgrade, you’ll need the ID for the database :
    Get-SPContentDatabase -Identity <your content database name>
    When you got the GUID for the database you can then resume the upgrade
             upgrade-spcontentdatabase -id <database
    GUID>
    Finally, check the upgrade status by running stsadm again:
    stsadm.exe -o localupgradestatus > upgradestatus.
    Thanks
    Anil Avula See Me At: http://expertsharepoint.blogspot.de/

Maybe you are looking for