Packet rate extremely high and crash my network

ALL
some of my tenant may have virus, or something, and let the packet rate to very high, and the traffic to internet, and crash the firewall also.
what i can do for those trunk or switchport in order to lower the risk.
i had try to stormcontrol broadcast to 2%, but seem not to the problem.

I dont know if this is 100% relevant to your scenario but the link below
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080110d17.shtml
describes a mechanism to protect networks against the nimda virus.
It uses QoS and CAR to achieve this.
A more long term solution in your case would be to isolate each of the "tenants" on their individual private vlans in isolated mode and have the router in promiscuous mode which would limit the broadcasts between the hosts themseleves and create a one way channel between each host and the router. This is of course for those clients that do cause havoc on the network. The rest of them could remain in the same vlans :)
Here is a link that might help
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a44.html
HTH
Arvind

Similar Messages

I have a new PC/Win7 and a new CS5 Design Premium Suite. InDesign is extremely slow and crashes.

I have a new PC/Win7 and a new CS5 Design Premium Suite. InDesign is extremely slow and crashes.
Any assistance about what might be going on would be extremely helpful. My CS3 was a dream compared to this version. UGGGG.

No banking software but a few other items. e.g.
acrotray *32
AeXAgentUIHost *32
csrss.exe
dagentui.exe
dwm.exe
dwrcst.exe *32
explorer.exe
FwcMgmt.exe *32
mobsinc.exe
PccNTMon.exe
PDFCreator.ext *32
pnamain.exe *32
sidebar.exe
ssonsvr.exe
taskhost.exe
taskmgr.exe
winlogon.exe

CS4 Extremely slow, and crashing on save

Illustrator CS4 is taking hours to save bigger files with semi-complicated drawings. Seeing a lot of the rotating beach ball. This drawing happens to have many gradients, a drop shadow and also a glow. Sometimes it takes all night to save the file. Now it seems any bigger file, such as 100mg's will work extremely slow, then crash on save. Any way to speed this up or fix the problem? I'm missing a deadline due to repeated work that has crashed over the course of a week. Thanks.

If you don't need the file to be compatible with other Creative Suite software (to e.g. place it there or open it) then you might try and turn off PDF compatibility.
Also try and turn off compression.

What is wrong with FireFox, ever since 5.0 it's been nothing but slow, and crashes, and 6.0 is not better??

Ever since version 5.0 I have had trouble with FireFox...extremely slow, and crashes multiple times a week. 6.0 is no better...same results.
''Edited by a moderator due to language. ''

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Premiere Pro CC(V.8.0) sluggish and crashes during Playback

Issue:
Premiere Pro CC(V.8.0) extremely sluggish and crashes during Playback. My video won't play at all unless I render (which is no problem). I render all my clips and attempt to play it back. It usually will allow me to watch it the first time around. After that, the program freezes up or becomes extremely sluggish. I have even had a blank green screen pop up on my playback monitor. Sometimes the program will generate the message "A Serious Error has occurred" and will shut down. Other times, the program just locks up. I am not running any other programs except email.
Here is what I've tried:
Cleared all my cache files
Set my Mercury Playback set to "Software only"
Restarted the program and computer after doing the above.
Made sure I had no RGB Curves as an effect (as I did see that was an issue from other threads)
Deleted all unused footage
Deleted all render files and re-rendered everything.
I am editing footage that requires Ultra Key. I am using a Three-Way Color Corrector. My video isn't even 1 minute long, so I would think it would be easy to render and playback.
Here is what I am working on (I know I need an upgrade - was hoping to after I finished this client's project):
Macbook Pro 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Graphics NVIDIA GeForce 8600M GT 256 MB
Software OS X 10.9.3
HELP! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

I am Windows but I have some saved Mac links that may help
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Recently experiencing slowness, and crashes

Just recently---about a week,I'm experiencing extreme slowness, and crashes. Also, it seems the computer---an old one, just keeps running or looking for something, even though it seems I'm at the website and it doesn't need to do this? This used to not be a problem, but now it is. From a novices point of view, It just seems the computer wants to keep computing when it probably doesn't need to? I keep getting the two messages: Firefox not responding---associated with the little hour glass, and unresponsive script. These are the message's I get when things get slow and "unresponsive". Hope someone can help. I do try to keep up with the computer maintenance; hard disk, and defragging. But, that makes no difference. I have noticed though recently, that when I do clear space on my hard disk, I keep showing a lot of space can be cleared compared to normal? Thank you.

Hi Alice,
I've got another question if you don't mind. For that matter anyone else can chime in. I realize some of my problems can be solved by getting a new computer.
But, the reason I have put off doing so is I don't have a clue as to how to transfer all the data from my old computer, to a new one. As I mentioned before, I'm not an experienced operator, so I have to take baby steps in accomplishing things on the computer.
Briefly looking over some of the various articles about the subject it seemed to make things more confusing actually. I guess many think that most people have fairly decent computer skills to begin with, when actually a lot don't, like myself.
That being said, can you offer a simplistic way to transfer data from my old computer, to a new one, in such away I can understand it, taking baby steps? Is using a memory stick/flash drive the best way to do it, as I have been told?
If so, how do use it?
My old system has 18.5 GB of data space, and it has used 11.5 GB currently. I have a gazillion bookmarks/favorites I definitely would like to save.
Can you be of help Alice? If not, can you point me in the right direction? Thank you.

My macbook pro (late 2011) is extreme slow, freezing, crashing and lagging too often.

I am new to the forum, I hope this is the good topic to post my problem.
I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
Thank you in advance!
(and sorry for my english - it is not my mother language)
EtreCheck version: 2.1.2 (105)
Report generated 2014. december 11. 12:59:29 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
10 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
SyncMaster 1680 x 1050 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:55:58
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
StoreJet Transcend StoreJet Transcend 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 67
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/KeyRemap4MacBook.app
[loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
/Applications/PMHMac.app
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
[not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/Applications/Toast 11 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Library/Extensions
[not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
/Library/StartupItems/DoubleCommand
[not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
/System/Library/Extensions
[loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
[failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.bjango.istatmenusnotifications.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.sony.SonyAutoLauncher.agent.plist [Support]
[loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
[failed] XR_3045NI_Startup_Fax.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[running] homebrew.mxcl.mysql.plist [Support]
User Login Items: ℹ️
Flux Alkalmazás (/Applications/Flux.app)
iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Caffeine Alkalmazás (/Applications/Caffeine.app)
Google Drive Alkalmazás (/Applications/Google Drive.app)
Dropbox Alkalmazás (/Applications/Dropbox.app)
DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
RescueTime UNKNOWNHidden (missing value)
Alfred 2 UNKNOWN (missing value)
SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Skype Alkalmazás (/Applications/Skype.app)
uTorrent Alkalmazás (/Applications/uTorrent.app)
Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
Internet Plug-ins: ℹ️
nplastpass: Version: 2.0.11 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 [Support]
ViewRightWebPlayer: Version: 3.5.0.0 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
ResponsiveResize
Save to Pocket
Awesome Screenshot
LastPass
feedly
3rd Party Preference Panes: ℹ️
Double Command [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
Java [Support]
MacFUSE (Tuxera) [Support]
Perian [Support]
Xmarks for Safari [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
Destinations:
Transcend 2TB [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 367.91 GB X 3)
Top Processes by CPU: ℹ️
      21% WindowServer
      12% Console
      8% parentalcontrolsd
      6% backupd
      6% Activity Monitor
Top Processes by Memory: ℹ️
462 MB mysqld
290 MB mds_stores
290 MB Safari
204 MB Finder
183 MB WindowServer
Virtual Memory Information: ℹ️
2.20 GB Free RAM
6.06 GB Active RAM
809 MB Inactive RAM
1.66 GB Wired RAM
1.87 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
Dec 11, 2014, 12:04:08 PM Self test - passed

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Extremely slow and high latency all day.

DSL is running extremely slow during peak hours from 12 afternoon to 12 midnight. Lower than 50% of rated speed and high latency
I have been frustrated with this DSL Service for months now. I am considering contacting BBB to file a complaint and I am tired of dealing with customer service giving me the run around. Internet is a monopoly in my area therefore verizon feels it doesn't have to do anything to keep its customers when they provide crappy service. I am on waitlist for another internet service provider and it is going to take almost a year because of how bad the internet options are in the area and demand for better options. I even had to pay over 100 dollars to get a truck roll come to my house to fix any issues within the house and the internet has not gotten better. Atleast I feel I should get a refund or something.
Here is my speedtest result just now. http://www.speedtest.net/my-result/2899553407
It has been even slower at other times. http://www.speedtest.net/my-result/2893509440
Modem is Westell 6100 or something.
Transceiver Statistics
Transceiver Revision:
7.2.3.0
Vendor ID Code:
4
Line Mode:
G.DMT Mode
Data Path:
Interleaved
Transceiver Information
Downstream Path
Upstream Path
DSL Speed (Kbits/Sec)
3360
864
Margin (dB)
15.5
13.0
Line Attenuation (dB)
21.5
13.0
Transmit Power (dBm)
7.6
11.9
Giganews line info
news.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 0 ms 0 ms 0 ms
2 ash-bb1-link.telia.net (213.248.70.241) 0 ms 0 ms 0 ms
3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 3 ms TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 3 ms
4 P1-8-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.151.237) 72 ms 72 ms 72 ms
5 P9-3.LSANCA-LCR-01.verizon-gni.net (130.81.193.123) 75 ms P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 75 ms 76 ms
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * Max number of unresponsive hops reached (firewall or filter?)
news-europe.giganews.com
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 vl201.gw1.ams.giganews.com (216.196.110.3) 0 ms 0 ms 0 ms
2 te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms te7-7.ccr01.ams05.atlas.cogentco.com (149.11.104.9) 0 ms te7-8.ccr01.ams05.atlas.cogentco.com (149.11.104.17) 0 ms
3 te0-7-0-16.ccr21.ams03.atlas.cogentco.com (154.54.72.42) 0 ms 0 ms 0 ms
4 te0-3-0-0.ccr21.lon13.atlas.cogentco.com (130.117.48.141) 8 ms 8 ms te0-2-0-0.ccr21.lon13.atlas.cogentco.com (154.54.28.158) 8 ms
5 te0-7-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.125) 90 ms te0-0-0-4.ccr21.jfk02.atlas.cogentco.com (154.54.84.129) 90 ms *
6 te0-3-0-6.ccr21.dca01.atlas.cogentco.com (154.54.41.5) 96 ms te0-0-0-2.ccr21.dca01.atlas.cogentco.com (154.54.25.238) 96 ms te0-2-0-7.ccr21.dca01.atlas.cogentco.com (154.54.41.1) 96 ms
7 be2042.ccr21.iad02.atlas.cogentco.com (154.54.26.126) 97 ms 97 ms 97 ms
8 uunet.iad01.atlas.cogentco.com (154.54.13.138) 99 ms verizon.iad01.atlas.cogentco.com (154.54.10.226) 105 ms 105 ms
9 P0-8-0-0.LSANCA-LCR-22.verizon-gni.net (130.81.29.127) 177 ms 178 ms P1-0-0-0.LSANCA-LCR-21.verizon-gni.net (130.81.199.39) 174 ms
10 P8-0.LSANCA-DSL-44.verizon-gni.net (130.81.35.133) 175 ms P9-3.LSANCA-LCR-02.verizon-gni.net (130.81.193.109) 187 ms 182 ms
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * Max number of unresponsive hops reached (firewall or filter?)
Here is what ICSI Netalyzer Results have stated.
Network Access Link Properties + –
Network performance (?): Latency: 580 ms, Loss: 15.5% –
The round-trip time (RTT) between your computer and our server is 580 ms, which is somewhat high. This may be due to a variety of factors, including distance between your computer and our server, a slow network link, or other network traffic.
We recorded a packet loss of 16%. This loss is very significant and will lead to serious performance problems. It could be due either to very high load on our servers due to a large number of visitors, or problems in your network. Of the packet loss, at least 14.0% of the packets appear to have been lost on the path from your computer to our servers.
TCP connection setup latency (?): 720ms –
The time it takes for your computer to set up a TCP connection with our server is 720 ms, which is quite high. This may be due to a variety of factors, including a significant distance between your computer and our server, a particularly slow or poor network link, or problems in your network.
Background measurement of network health (?): 3 transient outages, longest: 0.8 seconds –
During most of Netalyzr's execution, the client continuously measures the state of the network in the background, looking for short outages. During testing, the client observed 3 such outages. The longest outage lasted for 0.8 seconds. This suggests a general problem with the network where connectivity is intermittent. This loss might also cause some of Netalyzr's other tests to produce incorrect results.
Network bandwidth (?): Upload 700 Kbit/s, Download 2.3 Mbit/s +
Network buffer measurements (?): Uplink 5400 ms, Downlink 1200 ms –
We estimate your uplink as having 5400 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large uploads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large uploads at the same time.
We estimate your downlink as having 1200 ms of buffering. This is quite high, and you may experience substantial disruption to your network performance when performing interactive tasks such as web-surfing while simultaneously conducting large downloads. With such a buffer, real-time applications such as games or audio chat can work quite poorly when conducting large downloads at the same time.
HTTP Tests + –
Address-based HTTP proxy detection (?): OK +
Content-based HTTP proxy detection (?): OK +
HTTP proxy detection via malformed requests (?): OK +
Filetype-based filtering (?): OK +
HTTP caching behavior (?): OK +
JavaScript-based tests (?): OK +
DNS Tests + –
Restricted domain DNS lookup (?): OK +
Unrestricted domain DNS lookup (?): OK +
DNS resolver address (?): OK +
DNS resolver properties (?): Lookup latency 520 ms +
Direct probing of DNS resolvers (?): +
DNS glue policy (?): OK +
DNS resolver port randomization (?): OK +
DNS lookups of popular domains (?): OK +
DNS external proxy (?): OK +
DNS results wildcarding (?): Warning –
Your ISP's DNS server returns IP addresses even for domain names which should not resolve. Instead of an error, the DNS server returns an address of 199.101.28.20, which resolves to search.dnsassist.verizon.net. You can inspect the resulting HTML content here.
There are several possible explanations for this behavior. The most likely cause is that the ISP is attempting to profit from customer's typos by presenting advertisements in response to bad requests, but it could also be due to an error or misconfiguration in the DNS server.
The big problem with this behavior is that it can potentially break any network application which relies on DNS properly returning an error when a name does not exist.
The following lists your DNS server's behavior in more detail.
Please help. I am so frustrated I literally have fights with my family over internet problems. I am right now looking for other options and even starting to think about paying over 100 a month for dedicated line or T1 if they can service my area.

Not a single response from Verizon on this? And after you posted the tests & information they will need? I think I may have to make a service choice soon. Its bad enough Verizon can't post a simple email address for our support, they have removed Usenet access, removed access to our websites (I use HTML so their sitebuilder is useless)... Sheeshe...

My new airport extreme transmits at low rates (0-54)and is intermittent? Help!

I need help figuring out why my new 6th generation airport extreme signal is transmitting at a low rate (0-54) and when streaming the signal goes in and out? My equipment is as follows... I have a moterolla extreme DOCsis 3.0 modum, comcast 30 mpbs, and new apple extreme with current airport utility 7.7.1. Any ideas or troubleshooting tips?

When you created your wireless network with the Airport Extreme, did you select having your wireless network backwards compatible with "b/g" devices? If your wireless network was created as "N" compatible for "N" compatible wireless cards only, an iPhone will not be able to connect to your wireless network since the iPhone's wireless card is not "N" compatible.

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My MacBook (late 2009 Mac OS X Lion 10.7.5 (11G63) often runs VERY slow...beach ball of death frequently. My page ins (5.29GB), page outs (5.64BG), and swap files (10GB) seem extremely high in comparison to most other discussions in here. HELP!!??

My MacBook (late 2009 Mac OS X Lion 10.7.5 (11G63) often runs VERY slow...beach ball of death frequently. My page ins (3.29GB), page outs (5.64BG), and swap files (10GB) seem extremely high in comparison to most other discussions in here. I don't know how to copy the pie chart so it shows on here but here's what it says right now:
Free - 176 MB
Wired - 592MB
Active - 843MB
Inactive - 432MB
Used - 1.82 GB
VM size - 198GB
The page ins and page outs have 0 bytes/sec in the parenthesis even though the numbers are so high.
Any help anyone could provide would be greatly appreciated!!!

You difinately need more ram. 2gb is the bare minimum to run just the Lion OS, anything extra will slow your Mac to a crawl. Upgrade to 8gb from either Crucial http://www.crucial.com/ or OWC http://eshop.macsales.com/
And you will be a happy camper!

I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find a pth to any folders containning installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed com

I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find path to any folders containing installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed computer. Windows update as suggested in some posts does not assist either.
Can anyone assist me? Thank you so much

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Exporting sound for dvd studio 4. Studio 4 is only accepting ac3, saying bit rate too high in ALL other formats. However, aa3 auto levels the sound, which is not wanted, and it also drops the volume by about 40%, also not wanted. How do I get around this.

I have successfully used various formats and bit rates of sound in DVD Pro 4 with no problems, AIFF, WAVE, (obviously preferable as they give a good quality of sound as intended). However, of late, DVD Pro 4 refuses AIFF, WAVE, and anything higher than the lowest ac3 bit rate/format. This is rendering an aweful sound, auto volume leveled - which gives a very unprofessional fluctuation in volume and making a ionsense of careful sound editing. It also renders the volume at about 30% - 40% lower than the original master requiring huge increase in amplifier volume settings to get a decent volume.I have tried every format and bit rate, but FCP and DVD Pro 4 will only accept the lowest ac3 setting.
I have customers awaiting video of their concerts, can not deliver with this sound issue.
very much appreciate some assistance here.
Phil TP

I suggest posting this in the Final Cut Studio forum where regular users of DVDSP are more likely to see your post and respond. When you do, I would expect someone will ask why you arent using Compressor in your workflow…)
Good luck.
Russ

Safari has been running extremely slow for last 2-3 weeks, and crashing

I have Mac OS X G5 with operating system 10.4.11.
My Safari 4.1.3 has been running extremely slow for last 2-3 weeks, and crashing very often.
I have checked with my internet provider and they said everything looks ok in their end.
Does anybody know what is going on with safari???

Hi Rusty,
Best to start your own topic.
At the top of this window click: New / Discussion.
Select Safari from the pop up window.
Type in your Subject Line
Then post your crash report.
Carolyn

AEBS and Airport Extreme to create dual wireless networks

Sorry if this post is redundant, but I am not sure I put in the right place before.
I would like to know if this is possible.
I have an AEBS that has several n and g wireless clients. I would like to have dual networks; one n only and one g only. Can this be achieved by the following:
1. Connect cable modem to AEBS (which is set to n only) and has one network name.
2. Use an ethernet cable from one of the three ports in the back of the AEBS to an Airport express which would generate a second network with a different name for my g only devices.
Will this work? Thanks in advance!

T Lowell wrote:
Sorry if this post is redundant, but I am not sure I put in the right place before.
I would like to know if this is possible.
I have an AEBS that has several n and g wireless clients. I would like to have dual networks; one n only and one g only. Can this be achieved by the following:
1. Connect cable modem to AEBS (which is set to n only) and has one network name.
2. Use an ethernet cable from one of the three ports in the back of the AEBS to an Airport express which would generate a second network with a different name for my g only devices.
Will this work? Thanks in advance!
Yes, it should. I have a similar setup myself (except I have an Airport "Extreme" BS G for my "g" band). However, do you have an Airport "Extreme" BS G or an Airport "Express" G/N to supply your "g" band? Your post's subject Title and Body's information conflict in this regard.

Packet rate extremely high and crash my network

Similar Messages

Maybe you are looking for