Packing a delivery with a handling unit
Hi,
can anyone tell me how to pack a inbound delivery with a handling unit using a FM similar to what is done in vl32n
Regards
Nikhil
i have a handling unit and an inbound delivery which is created using mb_goods_movement_create(MIGO). so, the HU has to be packed with a material which can be seen in vl32n.
i used ws_delivery_update. It did not work.
pls suggest some other FM
Regards
Nikhil
Similar Messages
-
How to delete the item from Delivery?? (Handling Unit)
Dear SDNs,
I have a scenario of HU (Handling Unit).
Now here I have a case where the complete cycle is done. But end user now wants to change/delet the item in Delivery. So I have guided them to reverse all documents and it is done.
Now delivery is in Editable Mode. Now here when I try to Delete Delivery Line Item.. It is giving Error like "Item has already been packed and therefore cannot be deleted"
Diagnosis says "It is not possible to delete packed items."
Procedure says "Unpack the item from the shipping unit before you delete it."
Now when I select Line Item and click the PACK Button to go to the screen for "Processing of Handling Units for outbound Delivery XXXXXXX", it goes to the screen but here there is not Existing HUs available to Delete/Empty... whole screen is Blank.. even no Material to be packed...
I think user have proceeded the cycle without HU assignment.
So now I want to Delete the Line Items and want to insert fresh Items again...
Any inputs???
Thanks & Regards,
HPHardik Patel,
I have checked your equirement frankly speaking i was not exposed to such an scenario. I got alink which will help you
Handling Unit and Packing used across all modules.
[http://help.sap.com/saphelp_47x200/helpdata/en/c8/a44b749f3211d2858d0000e81ddea0/frameset.htm]
Here to your left choose Packing --> Working with Handling units --> Unpacking
Therein you will have Unpacking, Deleting HAndling units
Just Check....
Regards
Sathya -
Packing multiple materials in one Handling Unit
Dear Friends,
In an outbound delivery, I want to pack 8 materials in one single External Handling unit.
How should I use this?
Presently I am using BAPI_HU_PACK 8 times to do this in a loop & passing the same HU in parameter
BAPIHUKEY-HU_EXID for all the time but with ITEMPROPOSAL which is different all the time.
Is this the right way to pack multiple materials in the same HU?
Please share your experience..
Thank you.
Regards
PrashantHi,
Please explain a little more clearly.
Do you have an existing HU and you just want to assign it to the delivery or you want to create the HU also.
Please check how it is executed when working online.
HU that you want to assign to the delivery should have same/equal materials as that what we have in delivery.
Please check this out.
Regards, -
Information about outbound delivery and its handling units
Hi All experts,
I am working on a requirement where I have to display information about the following :
1. Outbound delivery number.
2. related Handling units( 1 or 2 ) indentification number.
3. Transport number.
4. Shipping to party.
5. Line items of handling units like material inside the handling unit.
6. Material quantity.
In the selection criteria user is given the choice of entering
1.Outbound delivery number.
2.Transport number.
3. Handling unit identification 1 or 2
4. Shipping to party
Based on this information on selection screen ouput needs to come out.
Could you people let me know about the tables and function modules which gives the informaiton back based on these details.
Thanks,
MarkHi Mark,
try out with IDOC_OUTPUT_DELVRY this Function Module.
Reward points if it is useful.
Regards,
Prasad -
VLMOVE 321 with nested Handling Unit
Hi
I have the following situation:
- Handling Unit active
- WM active (with Storage Unit)
- QM not active
I have nested HUs:
.1 HU001
...2 HU002
......3 Material A, Batch B1, quantity 10 pcs in inspection stock
...2 HU003
......3 Material A, Batch B2, quantity 20 pcs in inspection stock
In WM, I have only HU001.
The first question is: Is possible to manage lower-level HU as Storage Unit in WM? I mean, can I have HU002 and HU003 as storage unit number instead of HU001 in WM?
The second is: when I try to post HU002 to unrestricted-use stock (with VLMOVE 321), SAP posts the higher HU in unrestricted-use stock, changing also the stock of HU003 (Material A Batch B2).
I don't want it because Batch B2 isn't inspected!!
I think that I could unpack HU001, posting change to HU002 and then repack, but this process is very time expensive and it should be done automatically by interface from an external LIMS.
Have you got any idea?
If I activate QM-IDI interface (with inspection lots), could it be possible?
many thanks
michi guys
Iu2018ve met this problem
*1 we just manage HU in highest level in WM
you just select the lower-level HU when you confirm TO. we don't need to unpack.
i just know this. share with you.
hope help to you. -
STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319
Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
JoãHi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik. -
Batch split in inbound delivery according to Handling Units in Idoc
Hi everyone,
the Idoc with different HU's segments E1EDL37 (all the same batch no.), causes different items in the inbound delivery. But we need only one item, because it's the same batch no.!
Where can I customize this?
Thx in advance!
Thomasuse BAPI: BAPI_OUTB_DELIVERY_CONFIRM_DEC
I used this long time back. it worked fine. -
Packing instructins not picked during Handling Units
Hi all
I had created the packing instructions with the packaging material and the material to be packed .
when i tried to create the HUM's with reference to the packaging instructions the material to be packed is not getting picked .
can some explain what could be the possible reasons .
I simulation tab of the packing instructions the status of the packaging material is " ? "
thanks ,
ksrHi Vishal ,
thanks for the reply .
the steps i followed are
1) created packaging instructions using POP1 for a material .
2) Maintained POF1 - Create Packing Instruction Determination Record during this i checked and able to see the packaging instructions assigned to it too for STOC .
3) Non-Assigned Packing profile with STOC condition type exists .
still i am not able to pick the automatic packing instructions while using HU02 .
please correct me if i am wrong somewhere .
thanks ,
ksr -
Sales order with using handling unit
hi experts ,
When u creating sales order the error shows like this "No item category available (Table T184 OR VERP )" , how to resolve this
thanksHi,
Use t code VOV4 to determine item category. OR + VERP =
OR
Use t code SE16 and enter T184 table and give the entries.
Regards
Irfan -
Outbound Delivery Handling Unit
Hi Guys,
I have an outbound delivery with a Handling Unit document attached, question is...how will I delete this HU document. Pls enlighten. Thanks a lot.If the delivery document PGIed then you need to do VL09 transaction to reverse the PGI document.
Then do in VL02N transaction select Delete handling unit assignment icon it will remove all the handling units from delivery.
Later goto EDIT option then selct copy pack qty as dlv qty then save.Later system will allow you to delete the document. -
Handling unit with serial numbers in return delivery
There is a handling unit (HU),whose system status is PSTD(goods issue posted). The delivery is posted. The billing document are issued. Handling unit was packed with materials with equipments and serial numbers.
Now I am creating another sales document(I want to return the good) and return delivery. No handling unit is attached to return delivery. (Why not? Returning original sales document is created with reference to original sales document)
Now I attach the serial numbers to the return delivery. (the same serial numbers which are included(packed) in the above mentioned HU). The return delivery is successfully posted. The status of equipment/serial numbers is on stock.
The problem is that this serial number with equipment is still packed in the original HU.
How can unpack the equipment from HU? I think the problem is the status of HU which is PSTD(goods issue posted).
Or alternative: can I move the HU unit from original delivery and attach it to return delivery?
The changing of the status of HU is not posssible because the original delivery is posted and I do not want to change this original documents anymore too.I am afraid you are right
- The return delivery was created without HU. ( i mean HU which was originally sold in original delivery. )
Do you think I should create HU for return delivery with the same/different ID? How can I transfer equipment from original delivery HU to return delivery and HU ?
The problem seem to be that the original delivery and HU is locked (sytem status= posted )after posting. If I cancel posting of return delivery then I can attach a new HU. But the equipment is still part of the original HU.
Can I move equipment/serial numbers from original to returned HU? Is that possible at all?
I am talking about phisical same HU, so I guess there should be not 2 different HUs in the SAP system created.
I am looking for the scenario to sell equipment in one HU and return it in the same HU with return delivery.
thank you for your effort and responses -
Handling Unit: unable to pack the delivery
Dear Experts,
In a HU managed storage location, there is sales order stock for material A.
I want to post the sales order stock from sales order 1 item 10 to sales order 2 item 10, using movement type 413 E.
Then I got an outbound delivery (delivery type HTP, item category HSTP). I think I am supposed to pack this material before I could PGI.
But in the delivery (edit->pack) packing screen, I found I could NOT select/highlight the material A under field 'Material to be pack' at 'Pack material' tab. So I could not pack this material into the handling unit to finish to packing step.
Please kindly help ! Thank you !
JackHi,
Please try using LQ02 for your posting, if its not posting directly then you can opt to move from Sales order stock to normal stock and then again moving it to the other sales order stock. I know for sure that using LQ02 you can post from sales order to normal stock but since I don't have my current system setup to test this so I cant confirm if It can be used to do transfer directly as well.
Regards
Chandra Shekhar -
Handling unit preventing deletion of inbound delivery
Hello,
Our Decentralized WMS had a glitch in the system that left several
idocs queued to create inbound deliveries. These deliveries have
associated handling units which were placed from the outbound delivery
to the inbound. Before the inbound deliveries could be created via XI,
users created manual inbound deliveries against the POs and PGRed.
When the Decent WMS glitch was addressed, the IDOCs submitted were
processed, creating inbounds with handling units that were completely
packed.
So our system contains 2 inbounds for a po. We would like to delete the one with with the handling unit, but it's not that simple.
To address this issue, it is necessary to remove the handling units,
but this isn't possible. We receive an error message, unable to change.
I've attempted to PGR the delivery but this isn't possble either.
the following error message is received.
MSSA-SATRA exceeded by 2 EA : 10004063 AA26 0001 E
How can these Handling units be deleted to allow the associated inbound
deliveries to be deleted as well?
Is there a program to modify the status of the handling unit? I do not
want to perform any table editing or goods movements unless there are
no other alternativesapplying note 1083602 which should resolve
-
URGENT DELIVERY HANDLING UNIT STATUS ERROR
Hi Experts when i am doing PGI i am getting the following error and system is not allowing to do PGI
ERROR: When trying to read the status of an object (HU 210868), a system error occurred: For object number HU0000210868 there is no status object.Hi Ramesh,
The material is having the Packing ( Handling Units).
In delivery please do the Packing for the Materials because they have linked with the Handling Units. and Also check the wheather the Handling Units are configured properly.
For your Information please go through the Below which will help you further.
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
Identification number
Dimensions
Weight
Volume
Status
Materials and quantities
Packaging materials
Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
Weight/Volume/Dimensions
General data
Means-of-transport data
Additional data
Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Hello All,
i would like to pack material into Handling Unit with the BAPI_SHIPMENT_CHANGE like in transaction VT02N
i have created my shipment with BAPi_SHIPMENT_CREATE : i see material with delivery reference in part of screen
"Material to ba packed" and my Handling Unit in part of screen "All existing Hus available for packing".
i want to pack the material into the Handling Unit but i don't know how to fill BAPI_SHIPMENT_CHANGE to pack the material.
is it possible with this bapi ?
Thanks a lot for your answers
Regards,
MyHello
i think i make a mistake when i fill the tables :
i 'm going to try again but with which values have i to fill the actions table ? (i think i have to fill alsot these two tables :
IT_HUN_HDR_ACTION
IT_HUN_ITM_ACTION
and i don't understand the difference between these fields in table HDUNITEM ?
HDL_UNIT_INTO and HDL_UNIT_NO
HDL_UNIT_EXID_INTO and HDL_UNIT_EXID ?
i don't find a field like VEPO-VEPOS in table HDUNITEM ?
Thanks a lot
Regards,
MY
Edited by: MY on May 7, 2010 12:29 PM
Edited by: MY on May 7, 2010 12:31 PM
Maybe you are looking for
-
I have had my ipod set up as manual manage since I have had it. It has only been recently that I have had a look in the drive (my computer/ipod/music) to find about 3g worth of music there that isn't viewable on the ipod. I suspect it got there when
-
ATV STREAMING REALLY SLOW AFTER 2.3.1 update
Since applying the new update, when I start to stream to watch a movie it takes at least 20 seconds for the blue progress bar appear. My Apple TV is wired to my Airport Extreme that has a Hard drive connected with all the media. My Macbook then conne
-
What is the easy and fastest way to delete duplicate from list. My dynamic list is pretty small. Need to loop through and delete duplicate and give unique item list. We don't have a CF function yet?.
-
Migrate my aplication from JDev10.1.3 to JDev11 and use oraks.jks file
Hi group, I'm having trouble jdev10.1.3 import of my project to jdev11 because not found any files equivalent to oraks.jks, archiving of privileges for me to sign a webservice, someone has had this problem, and that tag xml, as I could be replacing t
-
All apps keeps crashing? i'm using iphone 3Gs, and no jailbreak??
All apps keeps crashing? i'm using iphone 3Gs, and no jailbreak?? OS & all apps are updated ..