Packing in Outbound Delivery
Hello All,
Please I need urgent help for this error am getting.
I created a sales order at the point of doing packing with reference to an existing handling unit, the system says
"No material to be packed found, or quantity to be packed equals zero
Message no. VHUPD026
I have searched through the forum and there are no answers that solve this problem. All my configurations are okay because I have checked all solutions provided in previous postings in the forum.
Thank You.
Hi,
Assuming that all relevant customizing is completed, Check the Material Master
Basic Data 1 view
"Matl Grp Pack Materials" field
" Reference material for packing" field
If values are not assigned, then you need to maintain the reference packing material ( Use VERP to create a material)
Hope this helps.
Regards,
Sharan
Similar Messages
-
Auto Packing in outbound delivery via IDOC
Hello All,
I got a requirement for Auto-packing in outbound delivery via IDOC process.
Can anybody through some light on the above requirement in finding Message type, process code and so on...
your every suggestion or hint will help me to fulfill the requirement.
Thanks in advance.
Best Regards
Suresh.Hi,
Auto Packing message type: SDPACK
Process code: SDPA
Basic type: SDPAID01
Regards
Suresh. -
Error after HU packing in Outbound Delivery
Hello All,
I unpack existing Handling Unit (HU) in an outbound delivery in VL02n transaction and pack part of its quantity in new HU that I create on same screen. Now, while saving this delivery I get this error "Movement type 990 does not allow immediate confirmation". Even when I delete existing HU nd pack all its content in new one I get the same message while saving the delivery.
Surprisingly for the same packing material and packed material in another outbound delivery I can do this operation without any error message.
What can be the possible reason for this. Please help me out.
Thanks,
Amit GN/A
-
Packing handling units to outbound delivery with batch management
Hello all,
I am packing an outbound delivery with a material that has batch management active. The packing is from a storage location that manages handling units (HU-managed sloc).
My problem is u2013 before entering the HUs to the delivery u2013 the system asks me to enter the batches (in the batch split function). Only then I am allowed to enter the HUs in the packing function.
What could be the reason for this preliminary batch entries ?
How can I set the system not to do that, i.e., I would like to be able to enter the HUs directly without entering the batchs separately.
Thanks,
IsaacDear Isaac,
this system behaviour can not be changed in standard and is also not recommended to change it via a modification. The reason for this system behaviour is to avoid inconsistencies in the system. The HU that you assign to the delivery, should exactly fit to the delivery. In case if the material is batch managed, you should specify the batch first, and then add the fitting HU with exactly that batch.
I suppose you checked the longtext for HUDIALOG102, that you get in the described case, but I copy it for you, in case if you did not read it:
"Diagnosis
There are items to be handled in batches which have not yet been
assigned to a batch.
Batches must be recognized for items with HU-managed storage location
For items at a storage location that is not HU-managed, the item type
determines if packing will take place at cumulated item quantity level
(meaning that the batch is not recognized at any point in the handling
unit) or if packing must take place at batch level.
System Response
If an item requires batch identification, that item will not be
suggested for packing as long as the batch is not recognized.
Procedure
Go to the maintenance of the delivery item and assign at least one batch
to the item."
Regards,
Ely -
Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON
Hi Friends
I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
But IDOC has error Specification of destination HU missing.
Could you please help us to resolve the issue to Pack the outbound delivery with the IDOC.
Thanks
SRHI Ian Kehoe
Sorry for delay in reply
Thanks you very much
I solved that problem .
Could you please advice test data for IDOC DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
Thanks
Ravi -
How to update packing list inform to an outbound delivery document
Hi all Experts,
I meet with an tough requirements, Is there any solution fuction can use to generate packing to a outbound delivery document?
PLease kindly advice, thanks!
Regards,
wei-guoHi,
I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
The picked quantity is generally filled:
u2022 by printing the picking list
u2022 Warehouse Management by creating a transfer order
u2022 or by manual entry
Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
Regards,
Andrea -
Packing using function modules in outbound delivery
Hi All,
I am creating a outbound delivery using BDC. I am trying to Create HUs, Pack and assign serial numbers. I wish to do it using standard FMs.
Please advise.
Step # 1. I was able to create HUs using BAPI_HU_CREATE .
I was not sure on the HU_EXID_TYPE though. I created with
'F' -No. rnge obj. HU_VEKP external interval - SSCC18 before GI.
Step #2 I assigned the HU to my Outbound delivery by updating VPOBJKEY and VPOBJ field of VEKP table. QUERY.
This also successful. I am now able to see the HU attached to the Outbound delivery.:)
Step #3 But I am not sure how to do the packing/ Assign Serial numbers. Need help?
I am working with FM WS_DELIVERY_UPDATE...... Pls advice.
Not sure on the values that I need to pass. Please help!
Thanks!hi sridhar,
i have the same requirement as yours....
but i m facing some problems with it....can u please share u r solution ?
thanks and regards,
Omkar -
Pack existing Handling Units into outbound delivery
Hi,
The current scenario is that a WHSCON IDoc is passed into SAP which will pack handling units onto an inbound delivery. As part of this processing the IDoc will create the HU records on VEKP.
Now, we are sending in a similar WHSCON IDoc to pack the same HU onto an outbound delivery. However, the IDoc is failing. It appears that the IDoc wants to create the HU instead of simply using the existing one.
Has anybody faced a similar issue.
Thanks
MartinHallo!
Yes, I have the same problem now.
In the past we had 2 wm sub systems which send data via WHSCON to SAP and pack the delivery items.
To avoid error messages we "kill" the old vekp-record by setting the vekp-status to "0099" with a hart update and create new hu records.
Nowadays this solution is not sufficient, because the old hu has serial numbers.
Any solution in sight?
bye
bernhard -
Is it possible to pack more than one outbound delivery in the same pack? Can you explain me how can I do this? (consider that we don´t use shipping)
very thanks in advance!!Hello Andrea
When you say "we don´t use shipping", I am guessing you mean that you don't use Transportation (Shipment) functionality.
You can not pack more than one outbound delivery in the same pack if you don't use Transportation. In Transportation you can create a shipment with multiple deliveries and pack them together.
Please post this in LE forum to get better guidance. -
About packing question in outbound delivery
Hi there:
Could you tell me whty some outbound delivery need to be packed before PGI and some do not need? I meant what's configuration to trigger that? Thanks.Hello
Its definitely depends on the item Category getting determined during delv.
Check TCode VLPP - Packing Control By Item Category (SPRO - LE - Shipping - Packing)
By this you can control for each item category whether it can be packed or whether it requires packing. If an item category is characterized as requiring packing, the item must be packed in delivery, before goods issue. If it can be packed, you can pack it. You cannot pack items with an item category which cannot be packed.
For materials to be handled in batches, you control whether only items with batch available can be packed, or basically the cumulated main item quantity is packed.
For each item category, enter either the packing control "A" for item categories requiring packing or "B" for item categories which cannot be packed or, leave the field empty if you want to characterize the item category as "can be packed".
Regards
JP -
Packing logic in outbound delivery VL01N
Hi All,
We are creating outbound delivery using BDC. I am facing problem, while packing.
Tcode : VL01n
Screen PACK (SHIFT + F6 )
Tab PACK MATERIAL
I am building the whole packing logic in BDC.
Steps
#1 . Create Handling units - Table control 1
#2 . Pick the materials - Table control 2
#3 . Hit the pack button .
I do this for all the HUs.
Problem: The table control 2 has only 10 visible line._ I cannot find a consistent method to scroll the table._?
Currently I am using the NEXT_PAGE button to scroll. [ PPLUS ]
It displays the last 9 line items.
Scenario :
Can you guys suggest me a consistent way to scroll?
Please do not suggest the scroll bar option/ P+ / P++ - These are not working for this screen!!!Hello,
There is this program MV50AFZ1 inside that you have the
forms 1)USEREXIT_SAVE_DOCUMENT
2)USEREXIT_SAVE_DOCUMENT_PREPARE.
I think you can write your code to populate the fields here.
Regards
ashish -
Packing two HU's - Outbound delivery
Hi,
I am creating a RF transaction to merge two HU's with same delivery.
I want to merge two HU's with packing object 01 - Outbound delivery and same delivery.
I don't want to create a new HU, but merge one HU into another ie, add the source HU line item to Target HU.
I have used BAPI_HU_REPACK Function Module but it was giving an error "HU &1 is assigned to an object that cannot be processed here", where I have passed HUKEY as Target HU and in REPACK table passed the values of Source HU with FLAG_PACKHU as 'X'.
Is there any problem in sending the data.. or else i need to use a different Function Module. Please suggest me.
Thanks in advance... Waiting for ur reply.Hemanth,
I recall that we used to update the HU status as well when we dissociated HU from delivery, though can't remember the reason now.
Pls check the VEKP-STATUS for HU after you have done with these 3 FM calls, I believe you have to update the status to 'BLANK' with the help of some FM, try it first if it works for you by direct updating it in table in Dev.
BR,
Diwakar -
Automatic goods issue for outbound delivery without picking/packing
Hi,
I have the following flow: sales order -> outbound delivery -> goods issue.
I would like to to be able to post an automatic goods issue on my delivery.
Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
Thanks,Hi,
Use t-code VL23
select varient SAP & STANDARD >>> Click on START IMMEDIATELY
or else
click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
it means sytem will run this program after every one minute
Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
Kapil -
How to unassign handling unit in outbound delivery?
(Don't Want to delete HU onlu unassign it from delivery: WM requirement)
I would like to unassign HU in an outbound delivery.
code i'm using make the handling unit disappear in the overview of HU.
but corresponding line in the "item overview" are still existing.
And when I want to copy pack quantities as delivery quantities, system tell me that "50.000 M have already been packed. Quantity cannot be changed. "
How can I do, to do as if i pushed button "delete assignment" in HU overview?
Here the code I'm using:
CALL FUNCTION 'HU_PACKING_REFRESH'.
CALL FUNCTION 'HU_GET_HUS'
EXPORTING
if_lock_hus = 'X'
it_venum = I_VENUM "it_venum contains l_venum
IMPORTING
ET_ITEM_SERIALNO = o_item_serialno .
CALL FUNCTION 'V51P_DELETE_RELATIONSHIP'
EXPORTING
IF_CONTROL = 'X'
IT_HUS = i_venum
IMPORTING
ET_NEW_HUS = LT_HUS
et_messages = lt_messages
EXCEPTIONS
FATAL_ERROR = 01 .
CALL FUNCTION 'HU_POST' .
call function 'BAPI_TRANSACTION_COMMIT'.
Please let me know the function module if anybody has idea to unassign from delivery.
Edited by: Akshay Kale on May 4, 2010 7:04 AMHi Akshay,
This question is marked as Answered , can you please let me know how you have resolved this error .
My Requirement is to remove HU assignment from inbound Delivery . If possible can u provide me the code snapshot to remove assignment for inbound delivery. -
How to do packing for a delivery? (which transaction?)
How to do packing for a outbound delivery? Which transaction is used for this purpose?
I am trying to do post goods issue for a outbound delivery but it gives me the error 'Delivery item is not or only partially packed'. How to solve this?
Thank you!
Message was edited by: Krishenhi,
in the same transaction VL01n u can also do packing. on application tool bar u have a button <b>PACK(shift+F6)</b>
or choose this menu path.
<b>EDIT -> PACK</b>
u choose shipping materials and the items here for packing
hope this helps..
reward if useful..
Maybe you are looking for
-
Cal year / Month is not populating correctly in Bex report
Hi Experts, We have a bex query on virtual provider with only one column in it i.e 'cal year / month'. I'm having the problem with this column. In the excel output of this report the cal year /month is displaying in this sequence. 01/0000 02/0000
-
Trouble with connecting to wifi
I have a yoga 2.13 purchased June 2014. It refuses to connect to wifi reads cannot connect to this network. I've tried to connect to several networks and haven't been able to. I also tried refreshing the PC.Nothing seems to work.
-
Volume initializing in RAID Utility
One of our Xserves was hung up today so I forced it off and restarted. The system has a RAID card and two 80GB drives mirrored. When the computer turned back on it flashed the folder question mark icon, it couldn't find a startup disk. Meanwhile the
-
[solved]xorgconf command no found
I just installed the base system and trying to set up a desktop. I installed xorg but there is no xorg.conf, so I've to generate one by myself. I want to use this command: xorgconf but error shows it not exist. how can I install xorgconf? TKS P.S: I'
-
Customer quality Certificate-Smart form
Hi Experts! I have developed smart form -Customer quality Certificate,need to attach that smart form to output type LQCB and generate that Smartform by standard tcode QC22. I have replaced Std scrtpt program with Smart form but till QC22 is calling o