Packing Instruction in storage location transfer (HUM)

Hello,
I have this request to create a (packing) Instruction for moving materials from a non HUM storage location to HU managed storage location for a particular item category of materials.
Can anyone please explain me how can Packing instruction be used in storage location transfer.
Thanks in advance,
Amit G

Hi,
POP1 - create packing instruction
POF1 - to determine the packing instruction
The Menu path is
SAP Easy Access - Logistics-central function-Handling unit management-Master data-Packing instructions
Pl. go the link
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/a44b7d9f3211d2858d0000e81ddea0/content.htm
help.sap.com/bp_autov1500/Auto_US/documentation/BP_Auto_Solution_Scope_V1.500_EN_US.doc

Similar Messages

Storage Location To Storage Location Transfer

Hello All
We are transfering the stock transfer from one storage location to another store loaction in two step ( 313 & 315)
We want to track the Stock in Transit. The details are not coming in MB5T
Where we will get that details
Thanks in advance
Regards
Rajesh Dalal

Hi,
There is no such report exists in SAP.
313 & 315 documents are no where linked up with each other. check Table MSEG and Table MKPF if required.
when we create the transfer posting it creates 2 document lines.
1. One line to reduce the stock from issuing Storage Location
2. Second line to put the stock in-transit of destination Storage Location.
And to move stock from one storage location to another storage location one can use any of the transfer posting document & SAP will allow you to post 315 document until stock in transit qty gets exausts.system allow to place the stock in reference to already executed TR document also.
You can get quantitative Stock in Transit data in Report MB52 under column Transit/Transter wherein stock in transit qty will reflect against receiving storage location or in table MARD
hope this will clear your doubts.
Edited by: wranjit on Aug 18, 2011 12:15 PM

Transfer between storage location to storage location within same plant

Dear Gurus,
We r doing storage location to storage location transfer within same plant through purchase order.
Due to excise requirement we have to raise excise invoice for the same for captive consumption purpose.
Is it possible to make it One step procedure so that GR will take place at same time as GI the way it works for plant to planrt.
In ECC 6.0 option is there for transfer between storage location. I configured but it is not working.
Please check the same.
Rgds,
Saurabh

Hi Saurabh,
The proceedure you are following is a bit wierd. But I think this is as per your business requirements.
You can continue to follow the same proceedure as this may not be possible through one step movement type.
Best Regards,
Prateksha.

Excise for STO for Storage location

I have a requirement whre i want to create Excise invoice for STO between storage location, as i already raised this doubt in SD community, but did not got the satisfaction.
As i want to use the same excise NUMBER series which is assingned to excise document when i create Excise with reference to Billing Document.
Plz guide how i will configure for Excise for STO in case of Storage location transfer and how i will maintain the same series for the EXCISE which i have created for when i create excise with referecence to my billing document.

not required

Storage loc to Storage loc transfer thru STO

I have seen something for storage location to storage location transfer through STO in IMG but not getting how to use that.Anybody have any idea about this how to use or work?
Thanks in advance..

Hi neetu,
The tag for activate STO for storage locaton to storage location in MM is for using a Storage location as the supplier ,as of in standard SAP we use Plant as supplier for STO's not storage location's directly in the vendor field at the time of STO.
its already mentioned in notes you can check that also. and main thing this is not active in Standard system as it may cause some undefined problems in systems.
Better go ahead with the Standard process.
Regards,
Ninad Kshirsagar

STO - Storage Location to Storage Location

Hi
Is there facility in 4.6C version to set up storage locaion
to storage location transfer STO ?
B'Coz iam not able to found Customizing setting in SPRO.
RRS.

Hi,
In 4.6 C version you will not get the Storage location to storage location Stock transfer option.
This is applicable to the ECC version only.
In 4.6C version you can adapt the Transfer posting from Storage loc to Storage loc using the Movement type 311,
but if you need the delivery type, Shipping data for Stock transfer b/w Storage loc to Storage location it is not possible in 4.6 C version. It is only avalibla in ECC versions.
rgds
Chidanand

How to do 543 for the sub-contracting components in HUM storage location

Hello,
I'm doing Sub-Contracting Goods receipt with 101 mvt type.
It happens that when i use a HUM storage location for the receipt of the materials, while posting the Goods receipt, it creates an inbound delivery.
Inbound delivery follows, Packing, Transfer Order, confirnmation and automatic Goods Receipt.
When you check the material document of the above Goods receipt, i dont see the posting of components with 543 +O mvt type. in the Goods Receipt document. It happens that only the main material with mvt. type 101 is posted.
Also let me know is there any OSS Note which supports this above business process.
Best Regards
Srinivas Kulkarni

Dear Srinivas,
In standard, a goods receipt posting for an inbound delivery referring to a sub-contracting purchase order triggers the goods issue posting for the components from the stock of material provided to the vendor, whether the receiving storage location is HU mananged or not. I thus assume that there is some issue specific to your system that prevents the step. What exactly do you mean with "leads to stock transfers"?
Best regards,
Christiane

Material transfer through storage location

Dear Sir,
Our company following process is incomplete, kindly correct us please if we are following wrong method:
Current method
1. We have two storage location one is 2101 (for production) and other is 2001(for warehouse).
2. Whenever we receive the material GRN is been done in storage location 2001
3. Then production people while doing packing plan, ask for material from storage location 2001 to 2101
4. For this production people create reservation through mb21 and reservation number gets created.
5. Then warehouse people transfer the material through mb1a through movement type 311
Issues:
1. Reservation list remains as it in mb25
Solution required :
1. How can warehouse people can transfer the material through generated reservation number so that reservation list can be closed.
2. Or any other method if we are following some wrong system

Is the manual reservation created for movement 311? and also, MB1A is for GI; MB1B is for transfer. Why are you using MB1A?
Also, when they do MB1B are they referencing the reservation?

Stock transfer between Plant/Storage location to Plant/Storage location

Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations 
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
Vasanthan

Dear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel

Transfer material from one storage location to another storage location

Is there any bapi to transfer material from one storage location to another storage location

Hi,
You need to use the below BAPI
BAPI_GOODSMVT_CREATE
Regards
Sudheer

Storage Location Stock transfer with value also transfered to a diff G/L Ac

Hi all,
In my scenario, I have to post a Sloc to Sloc mvt with regular 311 one step, but this does not have any FI impact. What I need is to to a transfer of storage location but also, the value of the transfered stock should me moved to a different GL account. any ideas on how to map this? I'm thinking of creating a new mvt type but not sure on how to define the FI part.
All ideas are greatly appreciated.
Regards

Hi,
With Different GL Account I mean for example I have 10EA of material X at cost of 10 in SLoc 1000, that means my total valuated stock is $100 and the same is on GL Acc 135010
I want to do something like a "311" and move 5 EA of this material X to SLoc 2000, and the result should be
5EA in Sloc 1000 ---- GL Account 135010 $5
5EA in Sloc 2000 ---- GL Account 135020 $5
Both Storage Locations are in the Same plant
as per my knowledge G/L account determination take place at valuation class of material not storage location level
second at storage location we have physical stock only not any material valuation
material valuation will take place at plant level ,you know it.
might be split valuation will help you for different price search in forum for split valuation where we can assign different valuation class and different G/L for one material
Regards
Kailas Ugale

Default storage location for transfer posting

Hi Gurus,
In transfer posting using mvt type 311,i want to make the storage location defaulted by a particular storage location. In other words system should not allow transfer posting if i use other storage location. Is this possible?
Regards,
Kumar

[Restrict user to post to a particular storage location|Restrict user to post 313 to a particular storage location.]

Transfer posting between storage location

Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzo

http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO.

Authorization Control for Transfer Posting's Storage Location

Dear Gurus,
Hi ! May I know is that SAP has any Authorization Object to control Transfer Posting (SAP R3 4.0B) ?
Let say in MB1B I only allow certain user to do transfer posting with P230 storage location, how should I control it ? With Authorization Profile?
I had tried remove all storage location P230 authorization M_MSEG_LGO from those user who are not allow to use, but sad to say that most of the user who allow to use transaction MB1B also able to do good receipt or transfer posting with storage location P230.
I had check those user's profile, actually in their authorization, there could not get P230 in their M_MSEG_LGO authorization object.
Thank you!
Warm regards

Hi,
I did not tried OLMB before, but I couldn't get the option you ask me to click.
Please refer to the screen, is it the Basis Administration is what you mention lately?
[http://www.pikipimp.com/pp/pimped_photo/s/image/40/552/543/OLMB-compiled.JPG?ts=1232093107390]
I had assign the storage location P230 to the authorize users, but the problem now was those unauthorized users also can use the storage location P230 to do Transfer Posting (MB1B) although I did not assign to them in PFCG.
Thank you.
Warm regards.

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Packing Instruction in storage location transfer (HUM)

Similar Messages

Maybe you are looking for