Packing Instruction
Hi All!
I have a requirement to change the packing instruction generated by system to my custom Packing instruction value.Can any body help to find the best possible way to do this.
I mean in VL02n Trans while doing automatic packing on a material handling unit and packing instructions are generated automatically.I want to keep the same functionality and change the packing instruction of the handling unit.Please advise
Regards
Praneeth
Hi Pavan,
http://help.sap.com/autoid20/helpdata/en/d1/164dbd01b1fc4e8c6fdffcfe0e32ff/content.htm
Reward points if it helpful.
Thanks & Regards
Sasikanth.Ch
Similar Messages
-
How to create Handling Unit using Process Order no. & Packing Instruction
Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
YogeshHi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh -
How to handle empty boxes to fill a pallet layer in Packing Instructions
Hi, I would like to know if it is possible to automatically add empty boxes in an outbound delivery of finished goods when the delivery is complete.
e.g. In the packing Instructions I have the following
1 Pallet
12 boxes of finished goods ( 4 boxes per layer on the pallet )
My delivery consists of 9 boxes on 1 pallet there I will need to add 3 empty boxes to create a complete layer on the pallet.
I would like the system to automatically add the 3 boxes, not manually add them.Hi,
I'm afraid in standard system it's not possible to add this manually. You may consider to discuss it in
in Enterprise Resource Planning (SAP ERP) where you can find more experts in this area.
Best regards,
Claire -
Settings for packing instruction
Dear SAP GURU'S,
I am facing with one problem which i would like you all to give me a solution.
I have created the packaging material with material type LIEH, and other material which i would like to pack with material type Trading goods HAWA. and i want to do the returnable packaging. I have created the sales order with order type as OR. and created the delivery but when i try to the packaging it is saying that no packing instruction found for the material.
Please can anybody tell me how to do the settings for packing instruction. I have read all the previous postings where i have found that someboody has done the configuring in POP1 and POF1 or POP2 can anybody tell me what are those things. please.
this are the initial thing where i got stuck up then later comes the part of LA and LN order types.
please solve this problem
Thanks in advance.
RegardsHi,
As long as the material master is maintained well, you can manually pack without packing instruction. For the material master, I'd like to give an example.
Example: to pack a computer in a box.
1. create material master for computer
2. create packaging material master for box
3. assign the packaging material master (box) to the material master (computer) -
Get short text of component in packing instruction
Hi,
i need to get the short text of Components tab in transaction POP3 (packing instruction). How can i do it?
Best regards.As u r using T u need to use READ_TEXT and pass following..
Language = E
Text Id = 0001
Text name = PACKINSTR
Text object use FM VHUPODB_PACKOBJ_READ_EXT
passing
POBJID_I 12
PACKTYP_I P
PRE_LOCK_MODE_I 2
POST_LOCK_MODE_I 2
ALL_LANGU_I X
GET_ITEMS X
GET_TEXT X
concatenate PACKNR and HDCOUNT -
Standard BW Datasource for Packing Instructions
Hi BW Experts,
Are there any Standard BW Datasources for Packing Instructions.
The Packing Instructions data mainly resides in PACKPO, PACKKP, PACKKPS tables in SAP.
If there are no Standard extractors or Data Sources , what are the options of extracting this data from SAP into BI.
I got to know there a few extract views, how do we use them.
MGV_V_PACKIN
MGV_V_PACKIN2
V_PACKIN
V_PACKIN2
Waiting for your kind response.
Thanks,
DanielHi Daniel,
I don't think you will find Business Content for those tables. That leaves you with the option to create a Generic DataSource yourself (t/code RSO2). Here you can use a table or a view as source.
Best regards,
Sander -
Material as a Component in Packing Instructions
Hi Friends,
I would like to understand the real need of entering Material Code which has to be packed (Item cateogry -> M) in the packing instructions (POP1), along with the packing materials (Item Cateogry -> P).
As we are already assigning the packing instruction number in POF1 against the material.
Can anyone please advise on the same.
Regards,
Harsh
Edited by: Harsh Mathur on Mar 26, 2008 3:53 PMlook up www.tidestone.com, they had an MS Excel lib you could get for java. It is not free and they also just sold to another company. See if they still offer it.
-
Call transaction for pop2.need to create packing instructions for materials
while assigning packing instruction to the materials from table mara.
its unable to create a new line item in the screen. ex: only 8 records are saved
but needs to proceed for other materials increasing the line item no.
options of create new material ( ok code'=INLI', , create new entry('=INMA')
and even tried for page down option '=P++'. is not working.
Can anyone help me in creating more than 100 line items.
Thanks in Advance,
SushmaHi,
Why do you want to create the varient for this?
what is your actual requirment?
Regards,
Sachin -
BAPI or FM for HU create Packing Instructions
Can Anyone plz tell me any BAPI or Function Module to create HU from Packing INstructions.
Many Thanks
Edited by: Hiren N. Panchal on Feb 7, 2011 9:50 AMThanks Abhijeet for mentioning both the BAPIs.
I am already aware of both these BAPIs, But I want to create HU during Goods Receipt Production Order & there I need to create an HU wrt Packing INstructions & pack the contents from Receipt of Production Order.
PLz tell me any bapi which can create HU & perform packing by passing PAcking Instructions will be very much helpful & also it will eliminate 2 steps of BAPI HU Create & BAPI HU Pack.
MAny Thanks once again..!! -
Using one packing instruction for several materials
Dear Friends,
I need some inputs on how to use one packing instruction for several materials.
The scenarion here is :
Many materials are packed in a similar way. If certain materials differ in only one characteristic (for example, construction), having to maintain a packing instruction for each of them results in a considerable time and efforts.
Need some valuable inputs to complete this requirement.
Regards,
HarshHi.
Try with reference material for packing (MARA-RMATP). Same material number must be entered on all materials which are packed through same packing instructions.
Then you have to create/use access sequence for determination of packing instructions that contains that characteristic (RMATP).
Best regards
Milan -
Basics of Packing instructions
I am trying to create a 'template' by pallet type, of material counts that fill the pallet. So for example, Pallet type '1', may hold 4 drums of material A, or 18 pails of material B, or 6 drums of material C. Pallet type '2' may hold 6 drums of material A, or 22 pails of material B, or 8 drums of material C.
How do i create my packing instructions to reflect this?Ok to make this a little clearer.. Here is what I have set up:
I want SAP to intrerpret it as 6DR of 828423, OR 20PL of 831528 OR 24pl of 827575.....
but what I get is 6DR AND 20PL AND 24PL on one packing material 411339.... is there anyway I can do this so that a delivery with for these 3 material/quantities would suggest 3 EA of 411339 rather than just 1?
THanks -
Packing Instruction determination procedure
How does the system determine Packing instruction determination procedure. For example Output procedeure in Sales order is determined based upon its assignment to Sales document type. Pricing procedure is determined based upon its assignment to corresponding Sales Area, Doc. pricing procedure and Cust. pricing procedure. How does Packing Instructions Procedure and packing instructions in general work.
You define a packing instruction that refers to specific characteristics, such as material and ship-to party. If you now want to pack this specific material for this specific ship-to party, the system can find the pre-defined packing instruction and use it to create one or more HU proposals that exactly fit the requirements of the customer. Packing instruction determination thus automates the packing process.
The system starts packing instruction determination when you enter a quanitity of a material to be packed and choose Pack automatically
Prerequisites:
You have created a packing instruction for packing with packing instructions.
You have made the settings for packing instruction determination in Customizing.
Customizing for packing instruction determination is preset in the standard system. However, you can extend the settings in the customer name range. You need the following for packing instruction determination:
- condition table
- access sequence
- determination type
- determination procedure.
You have also defined determination records. -
Dear All
Can anyone explain in detail about packing instruction and its determination with example.
Regards
Sandeep BhowmickHi,
Packing instructions consist of:
-Packing materials
-Materials to be packed
-Text items
-Subordinate packing instructions
-Rules concerning rounding, minimum quantities, and so on
-Definition of a check profile
And so on
Packing Instruction determination procedure
Lg Gen - HU Mgmt - Aut. Packing - Determination of Packaging Instructions
1. Define pr. for Packing Instruction Determination
Pack in Shipping Procedure 000001
Cond Type: SHIP
2. Define Determination type for Packing Instruction
Cond Type SHIP
Acc Seq SHIP
3. Check which table access seq hits
Eg Material/Ship to party
4. Maintain a condition record using POF1 for Determination Type SHIP
The Packing Instruction should get determined.
Regards
mahesh -
Hi all,
where do we assign packing instruction procedure to delivery document , so that it will determine packing automatically?????????????????????. as i have 4-5 procedure how system will determine which procedure to pick up for perticular delivery document???????????????????????????????Hi,
This is done automatically:
"The profiles are set as standard in the system. You can change the
descriptions and the settings for each profile. However, you cannot
create new profiles, delete existing ones, or change the assignment of
profile to application."
MdZ -
Packing Instruction with Handling Unit
Hi all
We are currently using packing instruction functionality in SAP and we need to pack the product in different boxes based upon the ordered quantity. for example, on the packing instruction, we have 3 boxes (3 different packaging materials to handle different quantities). I am using min qty function as well.
Box 1 Qty >1 - QTY <12
Box 2 Qty >12 - Qty <25
Box 3 Qty > 26
Now if the order qty is 30, then I would ideally like the box 3 to be chosen automatically for packing, and if it is 15, then I would like box 2 to be chosen automatically.
System does not seem to have any logic to do the calculation above. If I am missing something, please advise. I have already tried alternate packing instruction function but that also does not choose the box size for us automatically.
Regards
JaiIf you want to introduce some custom packing instructions you can implement BADI BADI_HU_AUTOPACK.
In method METHOD_PROPOSAL you can pack your materials as you want - based on different conditions.
Maybe you are looking for
-
i also click on detect displays and nothing happens.
-
Labview 2009 32 bit not running on xp 64 bit
Hi all, I tried to upgrade to LabVIEW 2009 from LabVIEW 8.6 on 64-bit windows XP machine. Following about a 2 hour removal of 8.6 and subsequent installation of LV 2009 it turns out that the device drivers are not compatible with a 64-bit machine. On
-
Dynamic passing database connection parameters
I have a situation which is two different source of client but they have the same functions, so have the same screens. But they maintain two separate database even with same table structure/tablename (I inherited this and cann't change it). I am thin
-
Mobileme does not upload final version of my imovie
I am publishing my imovie project in my Mobileme gallery and for some reason, Mobileme does not use the version that I see in my project area (the final version). Any idea how I can fix this? I only have one version of my project so I am not sure wha
-
How do I know which disk I booted from?
I think I started my computer by using external drive as startup disk (I was trying to recover deleted files off my hard drive). I've restarted the computer several times and I think I've continued to start off of external drive. How do I confirm thi