Packing queries

Dear Experts,
Could you please guide.
1) When i try to create Packing HU numbers generated. Can i pack without HU.
2) if i have 1050 pcs and 150 pcs free goods, i need to pack in Mastor Cartons. Assume 100 pcs can be accomodated in a Master carton, so 1050 pcs can be accomodated in 10 full cartons and one partial carton and free goods 1 full carton and one partial carton. In all the cases HU's will be created. Can we pack without HU.
3) Once i packed i need to create a packing list. Packing list containts no. of master carton, partial, batch, expiry etc. May i know how to create a packing list.
4) While packing it need to consume the packing material and cost needs to be updated in SO. For this do i enter packing material at SO level.
Please advise.
Regards,
Deepu Pillai

1)
No. HU will always be generated in packing.
2)
No. same answer as in Q1.
3)
You can customize packing output.
IMG -> logistics execution -> Shipping -> basic shipping function -> output control -> output determination -> maintain output determination for handling units.
4)
If you generate packing item in delivery, you can set movement type for this packing item (as in customizing). Then system will create material document for the packing item when posting GI. This will consume the stock and post relevant cost. This is done via material document. You don't need and should not add the packing item in SO.

Similar Messages

CRM support pack queries

Hello Support,
I have CRM 2005 in my landscape.It has the following patch level.
for ABAP stack it is at Stack 8
for JAVA stak it is at Stack 4.
And we are going for both (ABAP and JAVA) to STACK 15 which is latest.
I have the following query
1.) Can i directlly upgrade the JAVA stack from 4 to 15. Since i guess the present stack is too low.
Will we face any issue in doing so. What is the general practise?.
2.) For the ABAP stack , can i put the whole stack from 9 to 15 in the queue at a time or do one stack at a time.
Example
first upgrade it to 9 then 10 and so on
or directly in one queue to 15, so that we can have only one SPDD and SPAU.
3.) what is the main SNOTE for the CRM support pack.
4.) What all pre-requisite are ther perticulary for the CRM support packs.
Regards
Anthony

Hi mohit ,
Thanks for the reply ..
Yes , i will try convicing the client for going to latest -1 patches.
Now you have suggest that we must go for the ABAP to first SP12 and then to the latest -1.
I have the following query regarding this.
1.) How should i go to SP12 stack.
a.) by directly adding all the stacks till 12 in one go. (that is starting the queue from stack 8 to 12 ).
b.) going one stack at a time (i.e first will bring it to stack 9 then 10 then 11 and then 12)
c.) going component wise ( eg , first the BASIS till 12 , then the ABAP , then BW and so on.)
Regards
Anthony

Regarding- Packing Line Item Not Displayed in the Delivery Document.

Hi,
I have 2 queries
1) Have created separate Material Type Packaging for my packing material and the item category group used is VERP, my Orginal Material is getting packed in the Delivery Document, however the packed item is not coming as a separate line item in the Delivery document, I have maintained the item category settings for the Delivery Packing Material and also the packing Material contains stock,
2) The Plant and Storage Location for my handling unit need to get defaulted autmatically in the delivery document what settings should I configure for the same.
Kind Regards
Atul Keshav

Hi,
Find the below threads, which is explained in context with returnable packaging, same will be useful for you.
[Re: returnable packaging]
[Returnable packaging process;
Regards,
Reazuddin MD

TFS performance report pack not working on TFS 2013

Hi
I have TFS 2013 setup and I found TFS performance report pack from http://blogs.msdn.com/b/granth/archive/2009/02/03/announcing-tfs-performance-report-pack.aspx URL.
These reports don't work after uploading to my report server. The blog talk about creating a shared data source TfsActivityReportDS
and using Data Source=localhost;Initial Catalog=TfsActivityLogging
as connection string.
I don't have any database by name TfsActivityReportDS in my TFS and as a result I am not able to run any report on my TFS 2013 server.
Is there any way to get these reports work for TFS 2013? Or is there other TFS performance report pack made for TFS 2013?
Regards, Premal Acharya

Hi Charles,
Thanks a ton for your help. :)
It worked on TFS 2013. I followed your steps. I also found one easy way to edit the queries mentioned in those rdl files. I opened them in text editor and replaced TfsActivityLogging with my TFS project name (Tfs_DefaultCollection). Saved rdl file and opened
it in report builder and then my job was only to modify the data source.
I really appreciate your help for getting the reports worked on TFS 2013.
However I am only stuck with one little issue pertained to Server Status - Source Control Request Queue.rdl file
This report file doesn't have any queries and it also uses XML as connection to the data source. When I run this report on my TFS server I am getting error as URL "http://localhost:8080/versioncontrol/v1.0/administration.asmx" not found.
Detailed information about the report file is given below.
Report Name
Server Status - Source Control Request Queue
Connection type
XML
Connection string in data source
http://localhost:8080/versioncontrol/v1.0/administration.asmx
Query Under data set
<Query>
<Method Name="QueryServerRequests"
Namespace="http://schemas.microsoft.com/TeamFoundation/2005/06/VersionControl/Admin/03">
</Method>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
-------END---------
I don't know how to get it work. Your help and advice on this will be highly appreciated.
Thanks again for helping me to get other reports worked with TFS 2013.
Regards, Premal Acharya

Xcelsius with BW Queries taking a lot of time to open/save/publish

I have recently designed my first Dashboard using Xcelsius 2008(5.3.0.0, Build Number 12.3.0.670) connected to BW queries(we are on 7.01 SP 5) using SAP Netweaver BW Connection. While the file size jumped from 3MB(before connecting to BW Queries) to 88 MB (after the connections to BW queries). I have 10 Bex Queries embedded in the Dashboard and every time I'm trying to open the Xcelsius file, it takes a lot of time(as long as 15 minutes) and even if I make a small change and save it, it takes another 15-20 muntes and while Publishing it to BW role it is taking another 15-20 minutes.
I'm sure we are missing something here and thus running it to this issue. Can someone throw some ideas please?

Try installing Fix Pack 3.4 on your XCelsius designer. How many rows do your queries fetch?
Regards,
Stratos
PS: 88 MB is not a normal file size. My experience is that the size of a "healthy" dashboard should be less than 1.5 MB

Confused on syntax-combine two queries

I have two queries that I'm trying to combine, but can't figure out how to combine them ... successfully!?! The first query is pretty simple in that I'm looking at several fields from two different tables, no big deal.
The second query calculates the years, months, days between two dates that are used in the first query. I'm stumped on how to combine the queries so that they place nice with each other and return results.
Here's the first query ...
select
RTRIM(RTRIM(vpi.LastName) + ', ' + RTRIM(ISNULL(vpi.FirstName,''))) Employee,
convert(varchar,vpi.FromEffectiveDate,101) PositionStart,
convert(varchar,vpi.ToEffectiveDate,101) PositionChange,
convert(varchar,vpi.PositionStartDate,101) PositionStartDate,
vpi.PositionReason, vpi.PositionCode, vpc.PositionCodeDescription
from vhrl_positioninfo vpi
inner join position_codes vpc on vpi.PositionCode = vpc.PositionCode
Here's the second query ...
select
[Age] = convert(varchar, [Years]) + ' Years ' +
          convert(varchar, [Months]) + ' Months ' +
          convert(varchar, [Days]) + ' Days',     *
from
     select
          [Years] = case     when BirthDayThisYear <= Today
                    then datediff(year, BirthYearStart, CurrYearStart)
                    else datediff(year, BirthYearStart, CurrYearStart) - 1
                    end,
          [Months]= case     when BirthDayThisYear <= Today
                    then datediff(month, BirthDayThisYear, Today)
                    else datediff(month, BirthDayThisYear, Today) + 12
                    end,
          [Days]= case     when BirthDayThisMonth <= Today
                    then datediff(day, BirthDayThisMonth, Today)
                    else datediff(day, dateadd(month, -1, BirthDayThisMonth), Today)
                    end,
          Birth = convert(varchar(10) ,Birth, 121),
          Today = convert(varchar(10), Today, 121)
     from
          select     BirthDayThisYear =
               case     when     day(dateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth)) <> day(Birth)
                    then     dateadd(day, 1, dateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth))
                    else     dateadd(year, datediff(year, BirthYearStart, CurrYearStart), Birth)
                    end,
               BirthDayThisMonth =
               case      when      day(dateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth)) <> day(Birth)
                    then     dateadd(day, 1, dateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth))
                    else     dateadd(month, datediff(month, BirthMonthStart, CurrMonthStart), Birth)
                    end,
          from
               select     BirthYearStart = dateadd(year, datediff(year, 0, Birth), 0),
                    CurrYearStart = dateadd(year, datediff(year, 0, Today), 0),
                    BirthMonthStart = dateadd(month, datediff(month, 0, Birth), 0),
                    CurrMonthStart = dateadd(month, datediff(month, 0, Today), 0),
               from
                    select birth = convert(datetime, fromeffectivedate) ,
                    Today = case when convert(datetime, toeffectivedate) = '3000-01-01'
                                   THEN convert(datetime, convert(int,getdate()))
else vpi.toeffectivedate
end
     from vHRL_PositionInfo vpi inner join position_codes vpc
                    on vpi.PositionCode = vpc.PositionCode
               ) aaaa
          ) aaa
     ) aa
)a
Here's the sample data ...
vpi table ...
LastName FirstName FromEffectDate ToEffectDate PosStartDate PosReason PosCode
Doe John 2001-10-15 3000-01-01 10-15-2001 Transfer OperPack
Smith Tom 1994-11-28 2001-10-14 1994-11-28 New Hire OperDC
vpc table ...
PosCode PosDescription
OperPack Pack Line Operator
OperDC Descaler Operator
This is what the results should look like ...
John, Doe 2001-10-15 3000-01-01 10-15-2001 Transfer OperPack Pack Line Operator 6 Years 11 Months 16 Days
John, Doe 1994-11-28 2001-10-14 1994-11-28 New Hire OperDC Descaler Operator 6 Years 6 Months 19 Days
I know the date calculation piece adds 5 additional fields to the end, but they are not needed for the final report. Any help would be greatly appreciated! Thank you! Jena

Your query suggests you're not using Oracle. Please post in your relevant database forum.

Crystal Report Enterprise 8 Service Pack

Hi,
I have installed Crystal Report Enterprise 8 Developer Edition but i am unable to find the Service Pack for the same, it used to be available in the past on the Crystal Decisions site with the name: ce80win_en_sp1.exe however i'm unable to find it on the SAP site.
Can anyone help.
Thank you,
Parag

Hi Parag,
The downloads are available in the below mentioned link:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
You need to go to BusinessObjects Tab to get details for BusinessObjects Products in SAP site:
https://www.sdn.sap.com
Also as suggested by Ludek please post queries related to Enterprise in a separate link.
Hope that helps!
AG.

Authorization Errors from BEx queries

We are developing Crystal reports on top of BEx queries. We are working on BO XI 3.1 FP2.8, Crystal Reports FP2.8 and SAP Integration Kit FP2.8 and SAP BW is BI 7.0 Suppport pack 5.0. How can we display the Authorization errors that are returned on BEx queries on the Crystal reports.
If i run the Crystal reports and if it comes back empty, there can be 2 reasons one no Data and second no proper authorizations. We want to display a mesage to users to tell them the report is empty either becaus of no data or Authorization error.
Thanks,
Venkat

Thank you Ingo. Is there any work around where we can get the return code to a temporary KeyFigure and use that.
Regards,
Venkat

"Add media queries" button disabled

Hi,
I've downloaded the pack and everything else seems to work fine, but when I enter in the multiscreen preview window, the add media queries button is disabled (the viewport sizes is active) and I can't find any other way to bring up the menu for the css selection based on screen width.
Am I missing something? Or is there some incompatibility when using the pack in English while having the main software in Spanish?
Thanks.

The HTML5 Pack should work fine with the Spanish version of DW. What OS are you using? What language is your OS (English, Spanish)?
There is a known issue where the Add Media Queries button is sometimes disabled if you are in Live View and the URL in the Browser Navigation toolbar Address field starts with "http://". If you close the file and then re-open it a few times, the Add Media Queries button should eventually become enabled. It's kind of a random problem.
Please let us know if this helps or not to enable the Add Media Queries button.
Thanks,
David Alcala
Dreamweaver QE

Refresh individual queries within a workbook in SP20 EHp1 System

Hi,
Currently we have upgraded our BI system to EHP1 pack for SP20. Now we are in BI7.01. We have found in SAP release notes for EHP1 like " in BEX 7 analyzer we will able to Refresh individual queries within a workbook:".
Can you please tell me how to acheive that, as when we are trying to do it refreshes all the sheets.
Also in Global settings tab " Allow single data provider refresh" is disabled. Kindly tell me step by step procedure to acheive this,
Thanks

Hi Krishna,
Really thanks for your instructions. We have enabled hte "refresh on individual workbooks" in the workbook settings tab adn we are able to see the same in the context menu of the analysis grid.
Again i have few doubts.
I can able to see two options as below.
1. Refresh
2. Refresh this query.
What is the difference between this two?. Also when i click the "refresh this query" it shud display the "selections screen of the particular query", But it is not at all showing me a selection screen,
What i am doing is.. I am simply doing "refresh this query" option that will refresh my screen first adn i am doing change variables.
That will give me the selection screen of the particular query. If i am not doing so, all workbooks are refreshing,
Please advice, whether selection screen of the particular query can be shown when clicking "refresh this query".
Thanks/

Oracle dictionary view 2 find the queries run and it's execution time

Hi All,
I s there any oracle dictionary view which captures the queries being run by users on the database and time taken to execute those queries?
We need to find out the OS user not the database user since we have to identify the users who are executing long running queries.
We require this basically to monitor the long running queries on the database.
Thanks in Advance

Hi,
welcome to the forum!
Oracle doesn't store information about individual executions of SQL queries (that would've been too expensive), but you can find cumulative query execution stats in V$SQL. If you are interested in queries by a specific OS user, then Active Session History can help you (provided you have the Diagnostic Pack License).
Best regards,
Nikolay

Query used by SQL Server Management Pack for monitoring database backups

I use SCOM 2012 R2 and the SQL Server Management Pack to monitor SQL Server database backups. I believe I am getting false positives. SCOM reports database are not backuped, while in fact they are. So I need to troubleshoot this. I suspect SCOM is querying
the backup history in the msdb database. I want to know which query SCOM uses.
I have tried looking in the monitor's definition but I suspect the query is embedded in the management pack files which are binary. I have also tried running a trace using the SQL Server Profiler on my test environment and overriding the interval to 60 seconds,
but I don't see a relevant query being executed. I also don't see the alert reappear so I suspect SCOM does not honor the interval in a way I would expect.
What query, or other method, does SCOM use to check database backups?
Thanks in advance.

Thank you both Ivan and Michael,
I only saw your messages by email and didn't see your screen shot before I extracted the query myself. In my own queries I calculate the backup age in hours instead of days because of daily full backups. Perhaps It will be a good idea to create my own monitors
from scratch like I used to do with Nagios.
I will study the vbscripts and might create my own version which allows the query to be entered as an parameter and move all code to a .Net class which can be called from vbscript as an COM object. This way I hope to reduce the vbscript code to an minimum
while keeping the flexibility of the SCOM Operations Console and the robustness of .Net. I suspect I want to make more non standard monitors in the future.
Regards,
Arjen

Packed date format conversion

I am getting the date from a third party interface in the packed form of size 4 char of bit data type. Can this be converted into the SAP format?

HI
When converting decimal figures with numbers following the decimal point into binary floating-point numbers, unavoidable rounding errors occur. This is because many decimals (for example, 0.1) correspond to periodic fractions, and are therefore unable to be displayed exactly.
If you choose Calculate with Packed Numbers in the query monitor, packed numbers (ABAP data type P, with nine decimal places) are used as the internal number format for all query key figures instead of binary decimals. Rounding errors are avoided with commercial calculations with this fixed-point number, because in doing so no conversion of numbers into the dual system takes place.
Choose this option for those application areas in which a high accuracy is required (for example, for queries in the accounting and cost accounting areas).
Because calculating with packed numbers causes a high processing status overall, we recommend not using this number format for all query key figures, but rather only for those key figures for which a very high degree of accuracy is required.
You have to make this setting in the InfoObject maintenance for the respective key figure:
1)From the SAP Easy Access Menu, choose Modeling ® Object Maintenance ® InfoObject.
2)Enter the name of the key figure and choose Maintain.
3)To calculate with packed numbers, choose from the Additional Properties tab page under Diverse with the option Key Figure with Maximum Accuracy.
with regards
vinayaka

Problems with BCS Queries Inconsistent Data

Hi BI Experts,
We recently had our BCS upgrade from 4.0 to 6.0 and BW upgrade from 3.5 to 7.0
We have created some consolidated queries and we didnt change them to 7.0 they are still in 3.5 version. The problem is that we are getting some inconsistent data every time we ran those queries.
The BWP is yet to under go upgrade process so we checked the data in BWP (3.5) production and BWD (7.0) this tells us that the data in the tables are right.
I ran the query in RSRT and gives inconsistent data.
We are on the support pack 10 for BCS and
support pack 14 for BI 7.0.

Sorry guys....
I want to correct one statement up there ...when I run my queries with through RSRT i dont get any inconsistent data ..the data comes exactly the way we want ...the problem is only through the BEx.
Is it a upgrade bug or the support pack issue ..???
Your suggestions will be appreciated with lots of points
Thanks

RFC: Queries about Arch culture and community

Good day everyone,
This is a request for opinions from the Arch community, especially the Arch developers, Trusted Users, and long time users. I am writing a review about Arch Linux which I hope to publish within the next month or so. Unlike most distro reviews, which are actually distro installation reviews, I have devoted a lot of space to The Arch Way, unique technical qualities of Arch, day to day use and maintenance of Arch, and the Arch community. In my view, the community of a distro is much more important than its installation process.
If I may, I would like to pose some questions about the Arch community. FWIW, I have been quietly participating in the Arch community myself for some months now, contributing material to the wiki. Anyway, please take a look at the queries below, and comment on any as you see fit.
Thank you,
Luke Seubert
1. Despite its modest size, Arch has a very enthusiastic community, as evidenced by its internationalization projects, derivative distros, 3rd party repositories, Arch schwag, active forums and wiki, etc. Is this statement true or false, and if Arch does have an especially enthusiastic community, why?
2. Arch is deeply conservative, refusing to deviate from core principles. Still, within these bounds, Arch permits a wide array of innovation. Are these statements true or false, and why? If true, what are the pros and cons of such conservatism? If false, in what way has Arch deviated from its core principles or resisted innovation?
3. The Arch community is fairly harmonious, with little bickering, flamewars, forks or threats to fork, etc. Is this statement true or false, and why? (I have my own theory on the why of this one, and the answer in brief is... dogfood.)
4. How good or bad a job is Arch doing in cultivating new Trusted Users and Arch developers? Does it have a formal mentoring process? It seems the most direct path to TU status is to put together packages in AUR, and eventually have them voted into Community based upon quality and popularity. However, at some point, virtually all of the popular packages will already be in Community or Extra. How does an AUR uploader become a Trusted User then?
5. Hypothetical Scenario:
The Chakra Project successfully completes in alpha, beta, and release candidate Live CD testing, and releases its Live CD - version 1.0 - with the GUI easy Tribe installer, to wide acclaim - DistroWatch even raves about it. Suddenly, there are lots of new Arch users, who never went through the traditional Arch install process, who never "paid their Arch dues", and who are not nearly as clueful because they never RTFW. They are flooding IRC and webforums with really, uh, "basic" questions, and suggesting/demanding new features. How does the Arch community handle this abrupt change in its culture? Has it dealt with such culture shocks before?
6. If only you too could lift cars over your head, would you be more cool, less cool, or as cool as Phrakture, and why? What if you could only lift cars over your head after eating a can of spinach and slamming a six pack of Red Bull? Then how cool/not cool would you be by comparison?
Last edited by lseubert (2009-08-08 13:45:07)

Allan wrote:
Here are my opinions on these questions and do not necessarily reflect other Arch devs...
1. True. I believe part of the enthusiastic community comes from the fact that Arch requires you to set up your system for yourself. So people become very proud of their achievement of getting their system setup exactly as they like it.
This is an excellent point. There is a nice sense of pride that comes from tweaking your Arch install to just the way you like it. And it is an involved process requiring some modicum of skill.
Also, people have always been encouraged to contribute fixes or start projects to fulfill areas they see lacking. Seeing your work become used by many others is always a good feeling.
Yeah, I have noted this in my rough draft. Arch has amazingly low barriers to entry. Sign up for an AUR account, which is quick and automatic, and get to work. Your status and authority is derived from a roughly consensual meritocracy, as opposed to a hierarchical, bureaucratic process full of gatekeepers, aka potential gateclosers, like most distros.
This simplicity extends to our package manager, which I believe is a major factor in making the AUR as popular as it is. (Note that while pacman is developed primarily by Arch users, it aims not to be tied to any distro).
Allan, could you clarify this comment? How does pacman make AUR popular? While I use pacman to access binaries from core, extra, and community; I use yaourt to handle PKGBUILDs from AUR. I don't quite follow you on this one.
But as always, the principles guiding Arch do get bent when it is sensible to do so. It was always said we don't split packages like many other distros, but we do some splitting these days (e.g. gcc-libs, KDE). We now include info pages and other docs.
Both of which are good moves. A system should have documentation built in, for those occasions when internet access is down. And I might actually take a look at KDE 4 once again, now that I wouldn't have to download a pile of unwanted packages.
3. There are flame-wars every so often... The last one that was probably quite obvious to many was changing rules governing the community repo (requiring votes or 1% usage as defined by pkgstats) and the move to using the official db-scripts (which may be seen as making the TUs less independent).
That is a flamewar that I missed. How does Arch resolve difficult issues? There is no Constitution that I could find, nor any formal governing structure. Is it as simple as lengthy debate, and then Dred Overlord Phrakture decrees?
I have never heard of a treat to fork the distro or components of it. I guess that is because of the attitude of show us a working implementation of a good idea and it will possibly become official.
Well, there aren't forks, but there are a lot of derivative distros, some of them with very different goals. And there are a lot of 3rd party repositories out there, outside of AUR. I wouldn't call that forking, but it is, I guess, extending. I think such experimentation is a good thing - really good ideas might be developed outside of even AUR, and eventually brought back into the Arch ecosystem. I believe some of Xyne's packages got started that way, yes?
Here is an interesting factoid I came up with in my research:
Packages Per Maintainer Ratio - how many packages on average does a maintainer support?
For Debian, the P/M Ratio is 28
When you add up all the Arch Devs and TUs, and divide out the packages in core, extra, and community, the Arch P/M Ratio is 67.
Arch devs seem quite impressive, until you recall that they mostly maintain one version of each package and for only two architectures, whereas Debian devs support 11 architectures for 5 versions - experimental, unstable, testing, current stable, and old stable. (Ugh - is that brutal or what?)
Seen in that light, one has to admire the very hardworking Debian devs, and wonder a bit about those Arch dev slackers. Yet another T-shirt idea! Change the first idea so it now reads, "I'm a slacker Arch developer, and I eat my own dogfood!"

Packing queries

Similar Messages

Maybe you are looking for