Packing station (HUPAST) for HU

Hi Guru's
I have a requriement in the warhouse to set up HU management i have done the relevant setting but i am unable to pack multiple outbound deliveries into one HU.
The requirment is to pack multiple deliveries in to one one HU.It should meet below criteria
Able to pack multiple delivery items into one HU
*Diffrent shipto party should not be allowed to pack in one HU.
Can you please advice whether this can be met using t code "HUPAST".If so please advice what should be relevant config.
Many thanks....

Hello,
if you have many sales order that must be delivered in the same handling unit "Palette", you need to create one Outbound delivery against these sales orders.
so
manys sales orders==> One outbound delivery===> One handling unit
It seems logic for me
best regards

Similar Messages

Packing Serialized material using packing Station(HUPAST)

We are not able to pack serialized material to HU using packing station.
We are getting error
" Message no. IO 304 "
Packing station does not seem to have option to pack new serial numbers for Inventory managed HU compared to Delivery related HU.
I could not find related note on SAP.
In case anybody has any solution or recommendation, Response would be highly appreciated.
-Deepak-

Hello,
if you have many sales order that must be delivered in the same handling unit "Palette", you need to create one Outbound delivery against these sales orders.
so
manys sales orders==> One outbound delivery===> One handling unit
It seems logic for me
best regards

Weighing Scale integration with SAP ( Packing Station)

Hi All,
    We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
    I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
    Would you plz help me with some work-arounds ...???
Regards
Jamna

Hi Folks,
    There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna

Print Profiles and Packing Stations

How do I get print outputs from a Handling Unit Packing Station to de directed to the printers assigned in Print Profiles PRPHU?
The Handling Unit Packing Station is linked to the Print Profile through HUPAST_C and the Print Profile is linked to 2 outputs to 2 different printers. But it donu2019t work the way I supposed it to work - I get the message "No printer defined for output ZST1"

It may be helpful to you to know the logic which determines the printer that is used for output on the system. This is as follows :
1. the system will first check the output device specified in output record. The setting here has most priority.
2. system will read the setting in output type customizing double click the corresponding output type, find field "print parameter". Please see F1 help for this field.
3. According to the setting in point 2, system will choose output device either specified in trxn VP01 or trxn SU3.
Also, please be aware that if output is entered manually, then the printer is not defaulted. Print parameters are only defaulted when the output is determined by the system automatically.
Hope this helps.

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Is there any type of HiFi Station available for the 2nd Gen. iPod shuffle?

I was wondering if there is any type of HiFi Station available for the 2nd Gen. iPod shuffle.
With HiFi Station I mean those docking stations which directly play the music from your iPod, so that you don´t need to connect to your Computer f.e.
Does anybody know if something like this exist, or if it is only available for ALL other iPod models???
Thanks already!
Stefan

YOu can use one of these with any other iPod "HiFi Station": http://www.griffintechnology.com/products/dockshuffle/
Use your 2nd generation iPod shuffle in full-size Universal Dock devices.
Your iPod shuffle is an incredible entertainment value in an incredibly small package. It delivers the music just like its full-size iPod cousins. But one thing it doesn't do is fit in the dock well in your made-for-iPod speaker system.
That's why we made a Dock Adapter especially for 2nd generation iPod shuffle. The Dock Adapter is shaped just like the dock connector on the bottom of every full-size iPod. Plug it into your iPod shuffle's headphone jack, and suddenly the little guy fits in your iPod speakers just like the big guys.
Take Griffin Dock Adapter with you, and you can play your iPod shuffle wherever there's a set of Universal Dock speakers.

Fix Pack 2.5 for BOBJEDGE 3.1

Hello,
We are on BOBJ Edge 3.1 and SP2, I want to download Fixpack 2.5, Can I download the Fixpack 2.5 for Enterprise or there will be separate fix pack for BOBJ Edge 3.1.
Thanks,
Ravi

You should download and install Fix Pack 2.1 for BO Edge. It contains the same corrections as Fix Pack 2.5 for BO Enterprise.
Hint: You can check this by looking into the release notes note of the Fix Pack 2.1 for BO Edge. It contains the Fixed issues list of Fix Pack 2.5.
Regards,
Stratos

Is it possible to packing .zxp file for only plug-in(.8bf file)?

Hi
Is it possible to packing .zxp file for only certain plug-in(.8bf file)?
Now, I install the binary of Filter Plug-in as a resource of Hybrid extension.
As you know, the extension panel and the filter menu command is provided as a result.
If I want to provide only the Filter menu command, Of course I'm not able to use the .zxp packages for installation system. Is this correct?
My development environment:
OSX 10.8
Photoshop CS6
Extension Manager CS6
Flash Builder 4.6
Extension Builder 2.1
Thanks.

No, it is not. Worse, many people will view this in any old PDF viewer, most of which won't have overprint preview at all.
You need to send very clear instructions about this, with specific screen shots - or better, avoid tools and constructions that require it. Probably some wording about "need to view with suitable professional tools" will make the message more palatable.

HP Operations Manager integration pack 7.1 for SCORCH Error

Hi
I am using the HP Operations Manager integration pack 7.1 for SCORCH this is working well sending messages in both directions from SCOM2012 to HP OM and from HP OM to SCOM with the get message/acknowledge message objects but the monitor message object does
not work at all. No errors are logged and we can see the traffic in a network trace. The monitor message object just never triggers.
has anyone else seen this issue ?
Thanks

The problem that I had was with the HP OM función "Monitor Message". Web service didn´t response Orchestrator.
After all I fond the solution, If you Want the Orchestrator to monitor Messages from HPOM you should
define a filter by message group on the activity "monitor Message";
In this case that's because HPOM has the visibility of the user, configured through the atribute "Message Group".
I hope will be useful.
Regards

How to "Packing Deployment Template for Offline Intantiation " Mview side

Please help me. (sorry for my english )
When Create a Deployment Template in master side I have error at "Packing Deployment Template for Offline Intantiation " step.
I am in master side; TINTC/TINTC@TINTC . TINTC is replication administrator at TINTC side.
-- 1 Create a Deployment template
DECLARE
a NUMBER;
BEGIN
a := DBMS_REPCAT_RGT.CREATE_REFRESH_TEMPLATE (
owner => 'TINTC',
refresh_group_name => 'OFFLINE_REP',
refresh_template_name => 'OFFLINE_REP_DT',
template_comment => 'Offline Rep Deployment Template',
public_template => 'N');
END;
-- => OK
--2 add objects to tmplate
DECLARE
tempstring VARCHAR2(3000);
a NUMBER;
BEGIN
tempstring := 'CREATE MATERIALIZED VIEW tct_owner.offline_rep
REFRESH FAST WITH PRIMARY KEY FOR UPDATE AS
select offline_rep.id,offline_rep.name
from tintc.offline_rep@tintc offline_rep ';
a := DBMS_REPCAT_RGT.CREATE_TEMPLATE_OBJECT (
refresh_template_name => 'OFFLINE_REP_DT',
object_name => 'OFFLINE_REP',
object_type => 'SNAPSHOT',
ddl_text => tempstring);
END;
-- => OK
-- 3 Authorize users for private template
DECLARE
a NUMBER;
BEGIN
a := DBMS_REPCAT_RGT.CREATE_USER_AUTHORIZATION (
user_name => 'TINTC',
refresh_template_name => 'OFFLINE_REP_DT');
END;
-- => OK
-- Packing Deployment Template for Offline Intantiation
DECLARE
dt_num NUMBER;
BEGIN
dt_num := DBMS_REPCAT_RGT.INSTANTIATE_OFFLINE(
user_name => 'TINTC',
refresh_template_name => 'OFFLINE_REP_DT',
site_name => 'EXTGDT',
next_date => SYSDATE,
interval => 'SYSDATE + (1/144)');
DBMS_OUTPUT.PUT_LINE('Template ID = ' || dt_num);
END;
=>(Error): ORA-01917: user or role '' does not exist ORA-06512: at "SYS.DBMS_REPCAT_RGT_CUST", line 1988 ORA-06512: at "SYS.DBMS_REPCAT_RGT", line 1331 ORA-06512: at line 4
please help me . thankyou very much

Toan thang ngu

Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now available

Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now on Oracle Software Delivery Cloud
We are pleased to announce the General Availability of Agile PLM for Process Extensibility Pack 3.6 as of October 30th, 2013.
Extensibility Pack 3.6 provides two new technical enablement features:
Email Extensibility
Customizing the content of workflow emails in GSM and SCRM without custom code is now easier with the addition of a new set of placeholder variables, conditional variables, and other capabilities. These variables are available by deploying a new set of plugins, which can be configured through the CustomPluginExtensions.xml file.
Some examples of the new functionality include:
Displaying new data in the emails, such as the workflow Comment, Cross Reference numbers, Category/Sub-category/Group, a trade specification’s GTIN, a material specification’s Ingredient Statement, etc.
Providing meaningful related specification information in Signature Document emails.
Conditionally displaying data, such as only including a material specification’s classification if it is an Approved status.
User Interface Extensibility
Clients wishing to customize specific User Interface behavior, such as marking certain fields as read only, or applying formatting to show required fields, will be able to do this using the User Interface Extensions feature. Clients can write simple Javascript code which then gets pulled into the desired user interface pages. The Javascript code can leverage useful new Javascript variables and functions that make it easier to perform user interface manipulation, as well as access specific data from the given item (e.g., the specification’s status, the user’s groups, etc).
Watch the introductory video on the User Collaboration site for a high level overview.
More information on these new features can be found in the Extensibility Guide, along with detailed technical documentation.

Hello dirk and Kyle203,
I have PCI 8532 devicenet card in my system, the test unit has devicent implemented in it,
to verify devicenet is working or not we check whether we can read Devicenet vendor id, I have downoaded the latest driver NI-IndComDNET2.1-Beta1.
Thanks for the new update. I developed a VI which is very similar to GetIdentityAttrs VI which is in Example.
Port opens fine, but I cannot see connection being established.I always get the error Error -1074388991 occurred at Get DeviceNet Attribute.vi
I know connections are proper and the Device MAC ID and speed too. Pls throw some light.'
Attached is the VI and error image
Thanks
Attachments:
devicenet.vi ‏18 KB
devicenet error.JPG ‏32 KB

Hi i have purchased the rookie pack in need for speed most wanted but it hasn't appear yet.i tried every thing but yet it hasn't appear.what should i do?

hi
I have purchased the rookie pack in need for speed most wanted but it hasn't appear yet.i tried every thing but yet it hasn't appear.what should i do?

To Contact iTunes Support and request assistance Click Here

Do you guys carry Kensington Mini Battery Pack and Charger for iPhone and iPod

do you guys carry Kensington Mini Battery Pack and Charger for iPhones

This might be what you are looking for > http://store.apple.com/us/search?find=kensington+battery

How to pack an imac for shipping

hello
my question is how do I pack an imac for shipping? what precautins should I take?
thanks nadine1104

If you have the original box, great. Even if you do, I'd strongly recommend that you do one of two things:
1. Call a nearby Apple Store and see if they can re-pack the computer so that it can be shipped safely. If they can't then,
2. Bring it to a "pack and ship" store and have them do it.
In either event, when you do the shipping, be sure to insure the computer for what you'd have to pay to replace it. And, ship it by a method that gives you a tracking number so that you can follow it's progress to the destination.
Personally, I would not try to package the computer myself. I'd leave it to the "experts".

HT4972 when will pay as you go starter packs be available for iphone 5

when will pay as you go starter packs be available for iphone 5

The guy who makes them is on vacation this week, when he gets back I'll ask him .

Packing station (HUPAST) for HU

Similar Messages

Maybe you are looking for