Packing status becomes complete after using Pick HU

Hi Experts,
We use Pick HU for Outbound to pick products from warehouse to packing work center
but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center
the status of packing becomes complete
which should be ideally complete after we repack the products in to ship hu
is there any thing i m missing to accomplish this?
Regards,
Roopendra

Hi  Roopendra
I hope this is Correct as its belong to task and not activity.
And if you see activity OB02 then its has to complete at work center. This is about task.
Pack status on del for picking and not for packing activity.
Regards
Suraj

Similar Messages

  • Outbound packing status is "Completed" before we pack in work centre

    Hi,
    Once picking is completed (source and destination HU is same) immediately system says "packing completed" , in fact the next step is packing.
    Is it a right behavior in EWM?
    If i use outbound without storage process, how the packing status in ODO would be set as completed without any HU.
    Thanks,
    Ganesan

    Hi Ganesan,
    I believe that the packing status is just dynamically determined based on the HU data in the delivery. The status does not consider the process oriented storage control. Therefor I think the behaviour is right.
    Best regards,
    Christian

  • Keyboard becomes unresponsive after using keyboard shortcut for Spaces?

    Hi, I'm using Mac OS X 10.6.2 and have the most annoying bug! I always use spaces, and sometimes after using the keyboard shortcut to a space, my keyboard becomes completely unresponsive and I have to log out and log back in again!! Any known fixes? It's happening on my Macbook and Mac Mini!
    Thanks

    Check this thread (http://discussions.apple.com/thread.jspa?threadID=2161076&start=0&tstart=0) for the exact issue. Seems widespread.

  • Set sales order status is complete after Billing document created

    Hi experts:
    Current
    Complete rule of item category 'TAN' is space.
    The Status will be set complete after Delivery  document is created.
    I want to change the rule to
    the status will be set complete after billing document is created.
    Han can I do it ??

    Go to VOV7, select the item category and execute.  There maintain "B" against the field "Completion Rule"
    thanks
    G. Lakshmipathi

  • Am not getting correct status of IDOC after using MASTER_IDOC_DISTRIBUTE FM

    Hi,
    Am triggering an out bound custom IDOC by using my_custom_FM for sales orders. With in my_custom_FM am calling standard FM 'MASTER_IDOC_DISTRIBUTE' and distributing custom IDOC. If IDOC got failed I have to send an error message to SAP inbox (am achieving this, explicitly by using a standard FM). But, immediately after executing FM MASTER_IDOC_DISTRIBUTE, i checked the IDOC status in 'communication_idoc_control' parameter, its saying '30'(am keep on refreshing EDIDS table and WE05), even though IDOC went well. After am completely coming out from debugging the status has changed to '03' in EDIDS and WE05!
    1) Let me know how to get the correct status of IDOC immediately after executing the FM MASTER_IDOC_DISTRIBUTE (because, in next line am calling my message sending FM based on IDOC status).
    2) Or do i need to place my message sending FM some where else?
    Thank you

    Thank you.
    Unfortunately this is happening in an UPDATE task, still as a trial i tried to use COMMIT WORK, as expected it thwon a dump. Also tried only with DEQUE_ALL, no use.
    Are you sure that I can process the subsequent step/block of code(calling error message sending FM to SAP inbox) based on SY-SUBRC of MASTER_IDOC_DISTRIBUTE FM, not based on the IDOC STATUS?
    Because, just as trial, i have given a junk value(say, XXXXXX) for Message type in IDOC control, just before triggering the MASTER_IDOC_DISTRIBUTE FM.......but, still am getting SY-SUBRC = 0!! with a status of 29. Hence am thinking to do not relay on SY-SUBRC=0, sorry if am wrong
    Should i put my code of (calling error message sending FM) in any user-exit?
    Thank you

  • Document SIgnature Status becomes invalid after resigning

    Hi all,
    I  have a form with two Document Signature.
    When i clear and resign one of the Document Signature it status is invalid.
    Please suggest me a solution.
    Regards,
    S.V.Satish Kumar

    I tested the form you posted.  Here is what I found, but I am not completely clear on what all your script is supposed to be doing.
    Steps
    1)  I filled in the first "comment line"
    2)  I signed the first signature field
    3)  Results:  The signature was valid, the document status (see screen shot 1signature_docstatus.gif) reported the signature was valid.  The signature staus was valid as displayed in the signature panel (see screen shot 1signature_detail.gif)
    4)  I added and filled in a second "comment line"
    5)  I signed the second signature field
    6)  Results:  The first signature was valid, the second signature was valid, and the document status repored that ther were "unsigned changes" since the last signature was applied (see screen shot 2signature_docstatus.gif) The signature statuses were valid with subsequent changes made to the document as displayed in the signature panel (see screen shot 2signature_detail.gif)
    Don't confuse the "exclamation" mark icon with "Invalid", it is only a warning to inform you that changes have been made that are not "digitally signed", I suspect your some part of your script is causing this. If you want to have Acrobat\Reader display a green check mark icon, then you cannot make any changes to the document after the final signature has been applied.
    If you haven't done so, take a look at the sample I posted on your duplicate post in this forum ( http://forums.adobe.com/thread/492773?tstart=0 ).
    If a signature is "invalid" it will display a red "X" icon.
    Regards
    Steve

  • Why i am unable to retrieve my hotmail (looks like it is frozen and have to restart my PC and it becomes frozen after using for a while) ? .

    When i use IE, it's OK and i am able to use the hotmail.

    Open System Preferences > Bluetooth
    Select:  Show Bluetooth in menu bar
    Try deleting the associated Bluetooth preference file, then try re pairing the keyboard. Preference files can become corrupted.
    Open a Finder window. From the menu bar top of your screen click Go > Go to Folder
    Type of copy paste the following:
    /Libray/Preferences/com.apple.Bluetooth.plist
    Click Go then move the com.apple.Bluetooth.plist file to the Trash.
    Restart your Mac. Try pairing the keyboard.

  • Sales order status showing Completed, after I do partial delivery

    Dear All, Good morning
    I'm Creating an order for 5 quantities and creating a delivery for 2 Qty',
    my problem here is the sales order status is showing complete and I'm unable to create a delivery for the remaining Qty.
    I've checked with the Copy controls for OR - LR(T.code: VTLA) , for your reference I'm showing it below,
    FOR HEADER
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Copy Item Number is not CHECKED
    FOR ITEM
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Update Document Flow is CHECKED & Positive/Negative Qty
    Please its urgent.
    Thanks & Regards

    hello, friend.
    in addition to what the others have said, please check your customer master, particularly in the Sales Area Data > Shipping tab.  look at the partial deliveries.  there may have been settings that tell the system if a delivery has been created with reference to the sales order, the order will be completed even if the quantity is only partially delivered.  if the entry in the 'partial delivery per item' field is 'B', then this will explain your situation.
    this can also be manually set in the sales order, so you have to take a look at the order as well, at item level.
    regards.

  • Pack status misleading

    Dear All
    We have scenario of Pick, Pack Stage and Load where in loose items are picked to  temporary reusable pick HU (Totes) and brought to Pack work center.
    In the Packing station they are packed  as per customer specific packaging , Finally staged and Loaded.
    Issue is  delivery gets the pack status "completed"immediately after the pick confirmation to Pick HU and not based on actual pack completion.
    Is there any way to reflect the packing status after completion of packing in the work center.
    I could have activated the flag " Do not put away HUs" in the Pack  center  storage type but we want to track the pick HU's adn the contents at the pack stations until they are transferred to packing cartons.
    An extension to above question>>
    Unlike the above scenario where the loose items are picked into the pick HU the scenario here is Picking of cartons to pick HU..
    How to handle the requirement of  Pick HU being with the  resource after pick confirmation and the requirement is to just drop the picked cartons at the pack work center.
    regards
    Saravana

    Hi Saravana
    You correctly catch
    WO creation category  makes sense.
    For eg..
    WO creation category if it's pick path then the pack status not completed after picking
    WO creation category if it's pick and Pack then the pack status can have completed status after picking.
    This will work for you for you.
    WO creation category if it's pick path then the pack status not completed after picking.
    Process is just auto WT creation may not happen till it pack. need to check.
    only here is first WT is take hu via pick hu from bin to pack bin.
    wt 2 >>pack and complete pack step.
    wt3 >> create WT for pack to staging and then wt4 load.
    if you need any other help please let me know.
    regards
    Suraj

  • Set order status to completed if subsequent document is a proforma invoice

    Dear Experts,
    I created a debit memo request to create as subsequent document a proforma invoice only. This special business case has to do with customs purposes and should stop after the creation of the proforma..
    Now the debit memo request is still open and the next batch run is picking up the DMR again and create another proforma invoice.
    What I have to do to set the order status to completed after the first proforma invoice is issued?
    Thanks for your help.
    Kind regards
    Frank

    Hello,
    Check for the possiblilies of the following.
    In VOV8, slect the debit memo request order type, make the Order related billing type as F5 (Proforma - Order related).
    Check the item category for the Debit memo request item, standard is L2N. Maintian the billing relevency field as
    D-Proforma , maintain the completion as Colpleted after the first reference , if required.
    Prase

  • Status of Info packages and process changes become yellow after Unicode con

    Dear Friends,
    We have been facing very critical issue in Production system after Unicode conversion.
    Sequences of Details are provided for your reference.
    1.  We suspended all BW loads for 48(2 days) hours before Unicode starts and Handover the BW system to Basis.
    2.  Basis started doing Unicode conversion on BW and they found some standard jobs ( BI_* , Ex: BI_PROCESS_LOADING) which are released status and they assumed that these jobs would run any time so that they suspended all of them but they didnu2019t inform to BW team that they had done. We didnu2019t know that when they did that like pre-Unicode installation, during the Unicode conversion and post Unicode.
    3. Basis handover the system to BW team for Unicode testing (we called five finger testing) and we didnu2019t find any issues in the testing. Again we handover the system to Basis for post installations settings for Unicode and back up things. That time we didnu2019t release any jobs to load data to BW because Basis didnu2019t inform us that we can start loads. 
    4. After post installation is done and basis told us that you can start loads from Monday. Entire Unicode activity had been done on weekend.
    5. Before releasing all BW loads to run regularly, I found the all completed process chains status become yellow and I did further detailed analysis to find why; then found some more strange things those are as follows.
              1. Only info packages in process chains are become yellow and other process variants are fine like activation,
                   DTPu2019s, index and DB stats.
              2. Requests in PSA which were completed successfully are become yellow.
              3. Info packages in the process chains are successfully completed are not updating correct status instead of green it
                  showing yellow because of that other dependent objects are not triggering.
    We all thought that suspension of standard jobs must have been caused the problem.
    How can we change the status of IPs, PSA and process chains automatically?
    We reactivate all PCu2019s and released to run tomorrow.
    Could you please share your thoughts about the issue and help us resolve?
    Thanks in Advance,
    Nageswar.

    Nageswar,
    A couple of questions :
    1. If your previous  PC runs were in yellow status - it would not impact furute PC runs..
    2. If your IPAKs are in yellow - then you might have an issue with deltas happening since the last status would have been shown as incomplete.
    3. Suspension of the standard jobs will not affect the status since the jobs were suspended but not the actual loads i.e the loads were not stopped halfway but only the released jobs were stopped - you might have to schedule the process chains again to get back the old schedule.
    Usually in a Unicode conversion - the data is exported out of the DB and imported back - this might have caused some inconsistency in the database for the RS tables used for the monitors.
    Which version of BW are you in ..?
    were there any errors in the export / import procedure for unicode conversion ?
    As part of testing did you check if loads went through properly ..?
    Was stats run on the tables after unicode ?
    Also if possible regenerate all the indices on the files.
    Rerun stats and indices for all RS* tables

  • I'm running Windows 7 and occasionally, Firefox will become completely unresponsive and grey out, then none of my programs will open at all, including the Start menu, forcing me to use a hard restart and shut down. Any help would be appreciated.

    I'm not able to close and restart Firefox at all, since the computer becomes completely unresponsive, save for mouse input. Task Manager is also of no use.

    Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
    DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool

    My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool.
    I sue the batch feature for my job everyday to batch multiple images with a custom action, I need this feature back ASAP
    Iam on a new 27 IMAC OSX 10.9.4
    Adobe CC 2014 newest version completely up to date.

    The cleaner tool doesn't touch presets, templates or other user data. All it does is flush the installer database to remove blockages. The last time it actualyl deleted any files and folders was with CS3. so whatever you did, you may have hit the wrong button. And while I underrstand your frustration, the download pages states that you are advised to backup your data, regardless...
    Mylenium

  • Firefox tabs close when I click on a tab and windows become unresponsive after I launch a site. Using latest version for MacOSX. How do I fix this bug? Have already tried a bunch of things.

    Firefox tabs close when I simply click on a tab and windows become unresponsive after I launch a site. I am using the latest version for MacOSX but this happened a couple days ago with an older version of Firefox as well. Is this some kind of bug? How do I fix this bug? Have already tried a bunch of things like clearing/reinstalling etc. This does not help.
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    You can middle click a link to open that link in a new tab.
    *Open Link in New Tab: https://addons.mozilla.org/firefox/addon/open-link-in-new-tab/
    *Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/

  • Line details sort order when using Pick and Pack

    Hi,
    A customer of mine recently complained (very small complain) that when he used "Per date" as a sort when using Pick & Pack, that the line details where not grouped together by Sales Order Number.
    Example:
    2008/11/23   SO1001 - Line 1
    2008/11/23   SO1013 - Line 3
    2008/11/23   SO1001 - Line 2
    2008/11/23   SO1001 - Line 4
    2008/11/23   SO1021 - Line 1
    2008/11/23   SO1001 - Line 5
    etc...
    Is there a way to sort records on two columns instead of just one? or would there be another workaround this issue?
    Thanks
    Charles

    I think I found my answer, sorting data using the Data/Sort feature allows for sorting on multiple columns.

Maybe you are looking for