Packing using function modules in outbound delivery

Hi All,
         I am creating a outbound delivery using BDC. I am trying to Create HUs, Pack and assign serial numbers. I wish to do it using standard FMs.
Please advise.
Step # 1. I was able to create HUs using BAPI_HU_CREATE .
               I was not sure on the HU_EXID_TYPE though. I created with
                             'F' -No. rnge obj. HU_VEKP external interval - SSCC18 before GI.
Step #2  I assigned the HU to my Outbound delivery by updating VPOBJKEY and VPOBJ field of VEKP table. QUERY.
                This also successful. I am now able to see the HU attached to the Outbound delivery.:)
Step #3  But I am not sure how to do the packing/ Assign Serial numbers.  Need help?
                     I am working with FM WS_DELIVERY_UPDATE...... Pls advice.
                       Not sure on the values that I need to pass. Please help!
Thanks!

hi sridhar,
i have the same requirement as yours....
but i m facing some problems with it....can u please share u r solution ?
thanks and regards,
Omkar

Similar Messages

  • Function module for Outbound Delivery

    Dear ABAPers,
    Can anyone tell me the Function module for Out bound Delivery.
    Thanks & Regards,
    Ashok.

    Hi,
    Check this BAPI:
    BAPI_OUTB_DELIVERY_CREATE_SLS.
    Hope it is helps.
    Regards,
    T.D.M.

  • Function Module (BAPI) for Delivery Change

    Dear All,
    We have a Function Module "BAPI_SALESORDER_CHANGE" for changes in sales order, wherein we also can enter Texts in sales order.
    Please tell me similar such function module for Outbound Delivery, wherein I can enter / insert / change the Texts (both Header & Item) in a deivery document.
    Regards,
    Dhananjay

    Thanks
    Where in this Function Module do I find the table / parameter for adding text at item & header level.
    Regards
    Dhananjay

  • Function Module to Change Delivery?

    Dear All,
    Is there any Function Module to Change Delivery?
    Regards

    Hi,
    There are two BAPI's for it, one for inbound and other for outbound.
    BAPI_INB_DELIVERY_CHANGE
    BAPI_OUTB_DELIVERY_CHANGE
    Please use the respective one.
    If its useful, award points pls..
    Regards,
    Raju

  • Batch status updating using function module BAPI_BATCH_SAVE_REPLICA

    Hi,
    I want to change batch status after creating the outbound delivery through inbound idoc, i was able to create delivery , but after creation, i should update the batch status using function module BAPI_BATCH_SAVE_REPLICA, but i was unable to execute this function module correctly,
    Can any one provide details like what are minimum things that are required to update the batch status using this function module.
    In my system batches are defined at plant level.
    Please let me know the solution if any one knows this.
    With regards.
    P.Prasanth.

    Look at BAPI_INCOMINGINVOICE_POST
    Rob

  • Hi. i used Function module to change Characteristic values of a sales order

    hi. i used Function module to change Characteristic values of a sales order..
    but sales order's Characteristic values didn't change.
    And the Function module doesn't occur any log message.
    please tell me wrong code, and how to solve this problem.
    if i have wrong method, what data can i pass to change the characteristic values
    DATA: LT_E1CUVAL    TYPE TABLE OF E1CUVAL.
      DATA: WA_E1CUVAL    TYPE E1CUVAL.
      DATA: LS_CFG_HEAD   LIKE CUXT_CUCFG_S,
            LS_INSTANCES  LIKE CUXT_CUINS_S,
            LS_VALUES     LIKE CUXT_CUVAL_S,
            LS_E1CUCFG    LIKE E1CUCFG,
            LS_E1CUINS    LIKE E1CUINS,
            LS_E1CUVAL    LIKE E1CUVAL,
            LS_PROFILE    LIKE E1CUCOM,
            LS_VBAP       LIKE VBAP,
            L_CUOBJ       LIKE INOB-CUOBJ,
            L_ATINN       LIKE CABN-ATINN.
      DATA: LT_INSTANCES  LIKE CUXT_CUINS_S OCCURS 0,
            LT_PART_OF    LIKE CUXT_CUPRT_S OCCURS 0,
            LT_VALUES     LIKE CUXT_CUVAL_S OCCURS 0,
            LT_VAR_KEYS   LIKE CUXT_CUVK_S  OCCURS 0,
            LT_KSML       LIKE KSML         OCCURS 0 WITH HEADER LINE,
            BEGIN OF LT_CLINT OCCURS 0,
              CLINT  LIKE KSSK-CLINT,
            END OF LT_CLINT.
      DATA: LT_CUIB       LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
      DATA: E_ROOT_INSTANCE           TYPE     CUXT_INSTANCE_NO.
      DATA: EV_ROOT_PERSIST_ID     TYPE     IBEXTINST_DATA-EXT_INST_ID.
      DATA: EV_CFG_HAS_CHANGED     TYPE     XFELD.
      DATA: EV_HANDLE_APPL_LOG     TYPE     BALLOGHNDL.
      DATA: L_CUOBJ_NEW           TYPE CUOBJ.
      DATA: L_OWNER               TYPE IBXX_BUSINESS_OBJECT.
      REFRESH LT_E1CUVAL.
      CLEAR LS_VBAP.
      SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
                                FROM VBAP WHERE VBELN = I_VBELN
                                            AND POSNR = I_POSNR.
      IF SY-SUBRC <> 0.
        RAISE INSTANCE_NOT_FOUND.
      ENDIF.
      REFRESH LT_CUIB. CLEAR LT_CUIB.
      LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
      APPEND LT_CUIB.
      CALL FUNCTION 'CUCB_INITIALIZER'
        EXPORTING
          IT_INSTANCES = LT_CUIB[].
      CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
        EXPORTING
          I_ROOT_INSTANCE              = LS_VBAP-CUOBJ
        IMPORTING
          E_CFG_HEAD                   = LS_CFG_HEAD
          ES_PROFILE                   = LS_PROFILE
          ET_RETURN                    = ET_RETURN
        TABLES
          E_TAB_INSTANCES              = LT_INSTANCES
          E_TAB_PART_OF                = LT_PART_OF
          E_TAB_VALUES                 = LT_VALUES
          E_TAB_VAR_KEYS               = LT_VAR_KEYS
        EXCEPTIONS
          INVALID_INSTANCE             = 1
          NO_ROOT_INSTANCE             = 2
          INSTANCE_IS_A_CLASSIFICATION = 3
          INTERNAL_ERROR               = 4
          NO_PROFILE_FOUND             = 5
          INVALID_DATA                 = 6
          OTHERS                       = 7.
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE INSTANCE_NOT_FOUND.
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ELSE.
        LOOP AT LT_VALUES INTO LS_VALUES.
          IF    LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
             OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
            LS_VALUES-VALUE = '7100010'. "This is test data
            MODIFY LT_VALUES FROM LS_VALUES.
          ELSE.
            DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
          ENDIF.
          CLEAR LS_VALUES.
        ENDLOOP.
      ENDIF.
    &#50689;&#50629;&#51221;&#48372; &#53945;&#49457; &#48320;&#44221;
      CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
        EXPORTING
          I_CFG_HEADER                        = LS_CFG_HEAD
          I_ROOT_INSTANCE                     = LS_VBAP-CUOBJ
        I_PLANT                             =
        I_STRUCTURE_EXPLOSION_DATE          =
        I_STRUCTURE_EXPLOSION_APPL_ID       =
        I_LOGSYS                            =
          IS_PROFILE                          = LS_PROFILE
        IV_ONLY_SINGLE_LEVEL                =
        IV_HANDLE_APPL_LOG                  =
        IV_OBJECT_APPL_LOG                  = 'CIF'
        IV_SUBOBJECT_APPL_LOG               = 'T_CNFG'
        IMPORTING
          E_ROOT_INSTANCE                     = E_ROOT_INSTANCE
          EV_ROOT_PERSIST_ID                  = EV_ROOT_PERSIST_ID
          EV_CFG_HAS_CHANGED                  = EV_CFG_HAS_CHANGED
          EV_HANDLE_APPL_LOG                  = EV_HANDLE_APPL_LOG
          ET_RETURN                           = ET_RETURN
        TABLES
          I_TAB_INSTANCES                     = LT_INSTANCES
          I_TAB_PART_OF                       = LT_PART_OF
          I_TAB_VALUES                        = LT_VALUES
          I_TAB_VAR_KEYS                      = LT_VAR_KEYS
        I_TAB_BLOB                          =
        EXCEPTIONS
          NO_CONFIGURATION_DATA               = 1
          NO_ROOT_INSTANCE                    = 2
          INVALID_INSTANCE                    = 3
          INSTANCE_IS_A_CLASSIFICATION        = 4
          INTERNAL_ERROR                      = 5
          NO_PROFILE_FOUND                    = 6
          INVALID_DATA                        = 7
          OTHERS                              = 8
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE NO_CONFIGURATION_DATA.
          WHEN 3.
            RAISE NO_ROOT_INSTANCE.
          WHEN 3.
            RAISE INVALID_INSTANCE .
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN 3.
            RAISE INTERNAL_ERROR.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ENDIF.
      COMMIT WORK.
    save configuration with next commit
      CLEAR: LS_INSTANCES.
      READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
    L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
      L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
      L_OWNER-OBJECT_KEY  = LS_INSTANCES-OBJ_KEY.
      CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
        EXPORTING
          ROOT_INSTANCE         = LS_VBAP-CUOBJ
          ROOT_OBJECT           = L_OWNER
        IMPORTING
          NEW_INSTANCE          = L_CUOBJ_NEW
        EXCEPTIONS
          INVALID_INSTANCE      = 1
          INVALID_ROOT_INSTANCE = 2
          NO_CHANGES            = 3
          OTHERS                = 4.
      IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
        CLEAR LS_VBAP-CUOBJ.
        RAISE INTERNAL_ERROR.
      ELSEIF SY-SUBRC = 1.
        LS_VBAP-CUOBJ = L_CUOBJ_NEW.
      ENDIF.
    What's wrong?
    help me to solve this problem.
    Thanks a lot.

    <b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
    <b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
    <b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
    <b>SD_PARTNER_READ</b> all the partners information and addresses
    <b>SD_DETERMINE_CONTRACT_TYPE</b>
    In: at least VBAK-VBELN
    Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
    <b>SD_SALES_DOCUMENT_COPY</b>
    <b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
    SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
    SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
    RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
    SD_PACKING_PRINT_VIEW
    SD_DELIVERY_VIEW Data collection for printing
    called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
    RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
    regards
    vinod

  • Function Module to create Delivery with JIT Calls

    Hi SAP Guru's,
    We are working on SAP 4.6C version.
    I am looking for a function module to create delivery with JIT Calls.
    We are currently using the SAP standard function module "SHP_VL10_DELIVERY_CREATE" to create Delivery with JIT Calls. Each JIT Calls has apx 60-80 materials in it and each material refers to a unique Scheduling Agreement. This function module is taking very long time in production server to create delivery, it does not take much time in dev or quality server.
    We have JITV setting profile (For Sold To Party and Partner Description Profile) set as RELACE (to summarize the line items in JIT Call).
    Is there another function module that we can use to create delivery with JIT Calls?
    Thanks in Advance,
    Amit

    Hi there,
    There is no such function module.
    Regards
    Sanju

  • Function Module to add Delivery Schedule item in Schedule Agreement

    Hi,
    I have a requirement where I have to add Delivery Schedule line items to Schedule Agreement (ME38 transaction code). Well I have try to use Function Module (ME_CONFIRMATION_MAINTAIN) looks like its not working, but when I debug ME38 it is using same FM.
    when I use ME_CONFIRMATION_MAINTAIN separately I am filling up below values
    I_BSTAE  - ASN 
    I_EBELN  - 550000122
    I_EBELP  - 0010
    I_FUNKT - DV
    I_KDATB - 05/03/2000
    I_KDATE - 12/31/2006
    I_MEINS - PC
    I_MENGE -  30,259.000
    I_TRTYP - V
    I_VORGA - LE
    I_WERKS - DD22
    and I am filling up XEKET and not filling up YEKET (I don't know if I have to fill this)
    Please suggest me ?
    Note : mine is SAP 4.7 system
    Thanks
    Sarath

    I resolved the problem myself. Thanks.

  • How to upload Excel file in BI using function module in abap program

    How to upload Excel file in BI using function module in abap program?

    Hi Anuj,
    To upload the file , you can try a standard program "RSEPSFTP" .
    while you execute the program , a selection screen appears in which the inputs should be give as
    RFC destination - The target server name
    FTP command- PUT
    local file - your file name
    local directory - path of your local file
    remote file - your target file name
    remote directory - where it has to be stored
    Hope this is useful for you
    Thanks & regards
    Anju

  • How to maintain Ztable using function module instead of SM30

    Hi Friends,
    please tell me , How to maintain Ztable or view using function module instead of SM30.
    Thanks,
    Veerendra.

    Hi,
    You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
    You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
    Ex:
    CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
      EXPORTING
        ACTION                               =  'S'
        VIEW_NAME                            =  'Table Name'
    EXCEPTIONS
       CLIENT_REFERENCE                     = 1
       FOREIGN_LOCK                         = 2
       INVALID_ACTION                       = 3
       NO_CLIENTINDEPENDENT_AUTH            = 4
       NO_DATABASE_FUNCTION                 = 5
       NO_EDITOR_FUNCTION                   = 6
       NO_SHOW_AUTH                         = 7
       NO_TVDIR_ENTRY                       = 8
       NO_UPD_AUTH                          = 9
       ONLY_SHOW_ALLOWED                    = 10
       SYSTEM_FAILURE                       = 11
       UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
       VIEW_NOT_FOUND                       = 13
       OTHERS                               = 14.
    Hope this helps.
    Message was edited by: Imtiaz Ahmed

  • How to lock transaction using function module or something like that

    Hi, all
    I'd like to know the way to lock transacitons using function module or something like that.
    I know this would be possible if calling transaciton SM01, but I want to know other ways like calling function module  (BAPI ) or method.
    Thank you for your cooperation In advance.
    Regards,
    Hideki Kozai

    Hi,
           Try the following FM
    BRF_NETWORK_GRAPHICS           BRF: Network Graphics for BRF Objects
    BRF_INITIALIZE_GRAPHICS_NGR    BRF: Initialize Network Graphics
    BRF_NETWORK_GRAPHICS_NGR       BRF: Network Graphics: Start
    BUSG                           SAP Business Graphics
    GRAPH_2D                       Calling up the 2D business graphics
    GRAPH_2D_MENUE                 DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
    GRAPH_3D                       Calling up the 3D presentation graphics
    GRAPH_BUSG_COLOR_SET           Definition of color pallets for business graphics
    GRAPH_BUSG_MENU_SET            Pushbutton menu (tool bar) for all BUSG modules
    GRAPH_MATRIX                   Calling up SAP Business Graphics (2D, 3D and 4D)
    GRAPH_MATRIX_2D                Calling up the 2D graphics (user-friendly version)
    GRAPH_MATRIX_3D                Structure of 3D graphics (user-friendly version)
    GRAPH_MATRIX_4D                Calling up a 3D graphic (4th dimension stacked representation)
    Regards,

  • How to Send Internal table to SAP Spool using Function Modules or Methods?

    Hi Experts,
    How to Send Internal table to SAP Spool using Function Modules or Methods?
    Thanks ,
    Kiran

    This is my code.
    I still get the no ABAP list data for the spool, even tho I can see it sp01?
    REPORT  Z_MAIL_PAYSLIP.
    * Declaration Part *
    tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
    infotypes: 0000, 0001, 0105, 0655.
    data: begin of ITAB occurs 0,
      MTEXT(25) type C,
      PERNR like PA0001-PERNR,
      ABKRS like PA0001-ABKRS,
      ENAME like PA0001-ENAME,
      USRID_LONG like PA0105-USRID_LONG,
    end of ITAB.
    data: W_BEGDA like HRPY_RGDIR-FPBEG,
          W_ENDDA like HRPY_RGDIR-FPEND.
    data: RETURN like BAPIRETURN1 occurs 0 with header line.
    data: P_INFO like PC407,
          P_FORM like PC408 occurs 0 with header line.
    data: P_IDX type I,
          MY_MONTH type T549Q-PABRP,
          STR_MY_MONTH(2) type C,
          MY_YEAR type T549Q-PABRJ,
          STR_MY_YEAR(4) type C,
          CRLF(2) type x value '0D0A'.
    data: W_CMONTH(10) type C.
    data: TAB_LINES type I,
          ATT_TYPE like SOODK-OBJTP.
    data: begin of P_INDEX occurs 0,
            INDEX type I,
    end of P_INDEX.
    constants: begin of F__LTYPE, "type of line
       CMD like PC408-LTYPE value '/:',  "command
       TXT like PC408-LTYPE value 's',   "textline
    end of F__LTYPE.
    constants: begin of F__CMD, "commands
      NEWPAGE like PC408-LINDA value '',
    end of F__CMD.
    data: P_LIST like ABAPLIST occurs 1 with header line.
    *data: OBJBIN like SOLISTI1 occurs 10 with header line,
    data: OBJBIN like  LVC_S_1022 occurs 10 with header line,
          DOCDATA like SODOCCHGI1,
          OBJTXT like SOLISTI1 occurs 10 with header line,
          OBJPACK like SOPCKLSTI1 occurs 1 with header line,
          RECLIST like SOMLRECI1 occurs 1 with header line,
          OBJHEAD like SOLISTI1 occurs 1 with header line,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_buffer type string,
          l_no_of_bytes TYPE i,
          l_pdf_spoolid LIKE tsp01-rqident,
          l_jobname     LIKE tbtcjob-jobname.
    data: file_length  type int4,
          spool_id     type rspoid,
          line_cnt     type i.
    *-------------------------------------------------------------------* * INITIALIZATION *
    OBJBIN = ' | '.
    append OBJBIN.
    OBJPACK-HEAD_START = 1.
    data: S_ABKRS like PV000-ABKRS.
    data: S_PABRP like T549Q-PABRP.
    data: S_PABRJ like T549Q-PABRJ.
    * SELECTION SCREEN                                                  *
    selection-screen begin of block BL1.
    parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
    selection-screen end of block BL1.
    START-OF-SELECTION.
      s_ABKRS = PNPXABKR.
      S_PABRP = PNPPABRP.
      s_pabrj = PNPPABRJ.
      w_begda = PN-BEGDA.
      w_endda = PN-ENDDA.
    get pernr.
    *                                 "Check active employees
      rp-provide-from-last p0000 space pn-begda  pn-endda.
      CHECK P0000-STAT2 IN PNPSTAT2.
    *                                 "Check Payslip Mail flag
      rp-provide-from-last p0655 space pn-begda  pn-endda.
      CHECK P0655-ESSONLY = 'X'.
      rp-provide-from-last p0001 space pn-begda  pn-endda.
    *                                 "Find email address
      RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
      if p0105-usrid_LONG ne ''.
        ITAB-PERNR      = P0001-PERNR.
        ITAB-ABKRS      = P0001-ABKRS.
        ITAB-ENAME      = P0001-ENAME.
        ITAB-USRID_LONG = P0105-USRID_LONG.
        append itab.
        clear itab.
      endif.
      "SY-UCOMM ='ONLI'
    END-OF-SELECTION.
    *------------------------------------------------------------------* start-of-selection.
      write : / 'Payroll Area        : ', S_ABKRS.
      write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
      write : / 'System Time         : ', SY-UZEIT.
      write : / 'User Name           : ', SY-UNAME.
      write : / SY-ULINE.
      sort ITAB by PERNR.
      loop at ITAB.
        clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
        refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
    *                                                  Retrieve Payroll results sequence number for this run
        select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
                                        and FPBEG ge W_BEGDA
                                        and FPEND le W_ENDDA
                                        and SRTZA eq 'A'.
    *                                                  Produce payslip for those payroll results
        if SY-SUBRC = 0.
          call function 'GET_PAYSLIP'
            EXPORTING
              EMPLOYEE_NUMBER = ITAB-PERNR
              SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
              PAYSLIP_VARIANT = PAY_VAR
            IMPORTING
              RETURN          = RETURN
              P_INFO          = P_INFO
            TABLES
              P_FORM          = P_FORM.
          check RETURN is initial.
    *                                                 remove linetype from generated payslip
          loop at p_form.
            objbin = p_form-linda.
            append objbin.
            line_cnt = line_cnt + 1.
          endloop.
          file_length = line_cnt * 1022.
    *                                                 create spool file of paylsip
          CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
            EXPORTING
              i_file_length = file_length
            IMPORTING
              e_spoolid     = spool_id
            TABLES
              it_textdata   = objbin.
          IF sy-subrc EQ 0.
            WRITE spool_id.
          ENDIF.
          DESCRIBE table objbin.
          DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
          CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
            EXPORTING
              SRC_SPOOLID                    = spool_id
              NO_DIALOG                      = ' '
              DST_DEVICE                     = 'MAIL'
    *      PDF_DESTINATION                =
    *    IMPORTING
    *      PDF_BYTECOUNT                  = l_no_of_bytes
    *      PDF_SPOOLID                    = l_pdf_spoolid
    *      LIST_PAGECOUNT                 =
    *      BTC_JOBNAME                    =
    *      BTC_JOBCOUNT                   =
            TABLES
              PDF                            = pdf
            EXCEPTIONS
              ERR_NO_ABAP_SPOOLJOB           = 1
              ERR_NO_SPOOLJOB                = 2
              ERR_NO_PERMISSION              = 3
              ERR_CONV_NOT_POSSIBLE          = 4
              ERR_BAD_DESTDEVICE             = 5
              USER_CANCELLED                 = 6
              ERR_SPOOLERROR                 = 7
              ERR_TEMSEERROR                 = 8
              ERR_BTCJOB_OPEN_FAILED         = 9
              ERR_BTCJOB_SUBMIT_FAILED       = 10
              ERR_BTCJOB_CLOSE_FAILED        = 11
              OTHERS                         = 12
          IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    *Download PDF file C Drive
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename = 'C:\itab_to_pdf.pdf'
          filetype = 'BIN'
        TABLES
          data_tab = pdf.
    * Transfer the 132-long strings to 255-long strings
    *  LOOP AT pdf.
    *    TRANSLATE pdf USING ' ~'.
    *    CONCATENATE gd_buffer pdf INTO gd_buffer.
    *  ENDLOOP.
    *  TRANSLATE gd_buffer USING '~ '.
    *  DO.
    *    it_mess_att = gd_buffer.
    *    APPEND it_mess_att.
    *    SHIFT gd_buffer LEFT BY 255 PLACES.
    *    IF gd_buffer IS INITIAL.
    *      EXIT.
    *    ENDIF.
    *  ENDDO.
          OBJHEAD = 'Objhead'.
          append OBJHEAD.
    * preparing email subject
          concatenate W_ENDDA(6)
                    ' Payslip-'
                    ITAB-ENAME+0(28)
                    ITAB-PERNR+4(4) ')'
                 into DOCDATA-OBJ_DESCR.
          DOCDATA-OBJ_NAME = 'Pay Slip'.
          DOCDATA-OBJ_LANGU = SY-LANGU.
          OBJTXT = 'Pay Slip.'.
          append OBJTXT.
    *prepare email lines
          OBJTXT = DOCDATA-OBJ_DESCR.
          append OBJTXT.
          OBJTXT = 'Please find enclosed your current payslip.'.
          append OBJTXT.
    * Write Attachment(Main)
    * 3 has been fixed because OBJTXT has fix three lines
          read table OBJTXT index 3.
    *    DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
          clear OBJPACK-TRANSF_BIN.
          OBJPACK-HEAD_START = 1.
          OBJPACK-HEAD_NUM = 0.
          OBJPACK-BODY_START = 1.
          OBJPACK-BODY_NUM = 3.
          OBJPACK-DOC_TYPE = 'RAW'.
          append OBJPACK.
    * Create Message Attachment
          ATT_TYPE = 'PDF'.
          describe table OBJBIN lines TAB_LINES.
          read table OBJBIN index TAB_LINES.
    *    OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
          OBJPACK-TRANSF_BIN = 'X'.
          OBJPACK-HEAD_START = 1.
          OBJPACK-HEAD_NUM = 0.
          OBJPACK-BODY_START = 1.
          OBJPACK-BODY_NUM = TAB_LINES.
          OBJPACK-DOC_TYPE = ATT_TYPE.
          OBJPACK-OBJ_NAME = 'ATTACHMENT'.
          OBJPACK-OBJ_DESCR = 'Payslip'.
          append OBJPACK.
    * Create receiver list refresh RECLIST.
          clear RECLIST.
          RECLIST-RECEIVER = itab-USRID_long.
          translate RECLIST-RECEIVER to lower case.
          RECLIST-REC_TYPE = 'U'.
          append RECLIST.
    * Send the document
    *SO_NEW_DOCUMENT_ATT_SEND_API1
          call function 'SO_DOCUMENT_SEND_API1'
            exporting
              DOCUMENT_DATA = DOCDATA
              PUT_IN_OUTBOX = 'X'
              COMMIT_WORK = 'X'
    * IMPORTING
    *   SENT_TO_ALL =
    *   NEW_OBJECT_ID =
            tables
              PACKING_LIST  = OBJPACK
              OBJECT_HEADER = OBJHEAD
              CONTENTS_BIN  = pdf
              CONTENTS_TXT  = OBJTXT
    *   CONTENTS_HEX =
    *   OBJECT_PARA =
    *   OBJECT_PARB =
              RECEIVERS = RECLIST
            exceptions
              TOO_MANY_RECEIVERS = 1
              DOCUMENT_NOT_SENT = 2
              DOCUMENT_TYPE_NOT_EXIST = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR = 5
              X_ERROR = 6
              ENQUEUE_ERROR = 7
              others = 8.
          if SY-SUBRC NE 0.
            ITAB-MTEXT = 'Message Not Sent to : '.
          else.
            ITAB-MTEXT = 'Message Sent to : '.
          endif.
    *    else.
    *      ITAB-MTEXT = 'Message Not Sent to : '.
    *    endif.
        else.
          "SY-SUBRC Not = 0
          ITAB-MTEXT = 'Payroll data not found : '.
        endif.
        "end of SY-SUBRC = 0.
        modify ITAB.
      endloop. "end loop at ITAB
      sort ITAB by MTEXT PERNR.
      loop at ITAB.
        at new MTEXT.
          uline.
          write : / ITAB-MTEXT color 4 intensified on.
          write : / 'Emp. Code' color 2 intensified on,
                 12 'Emp. Name' color 2 intensified on,
                 54 'Email ID' color 2 intensified on.
        endat.
        write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
      endloop.

  • ALV  report ON WEB BROWSER USING FUNCTION MODULE

    HI EXPERTS,
    USING FUNCTION MODULE IN ALV ......HOW CAN WE DISPLAY ALV ON BROWSER(INTERNET).

    hi
    good
    go through these links, you ll find detail idea about displaying a ALV output in a browser.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
    http://help.sap.com/saphelp_nw04/helpdata/en/3e/f496ef143a11d4b59f006094192fe3/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    thanks
    mrutyun^

  • Custom extractors using function modules

    Hey all
    Does anyone has a document regarding how to <b>Develop Custom extractors using function modules?Step by step method would be great</b>
    Also document regarding <b>CTS in BW?</b>
    Appreciate it
    Thanks

    Hi,
    See here:
    Generic Extractors
    Generic data sources
    Generic DS
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Best regards,
    Eugene

  • Error occurred while loading Generic extraction using Function module

    Hi all
    I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Job terminated in source system --> Request set to red
    Message no. RSM078
    Can u help plz....

    Hi Vishnu
    This are the Job log details i found in source system...Can u tell what whould be the problem?
    Message
    Job started
    Step 001 started (program SBIE0001, variant &0000000002861, user ID
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = ZYFI102
    RLOGSYS    =
    REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
    UPDMODE    = D
    LANGUAGES  = *
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 0                                       *
    abap/heap_area_total.......... 10737418240                             *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 3000000                                 *
    ztta/roll_extension........... 2000000000                              *
    No authorization for Acct type D
    Job cancelled after system exception ERROR_MESSAGE
    Thanks in advance
    Edited by: MohanDP on Feb 25, 2011 11:58 AM
    Edited by: MohanDP on Feb 25, 2011 12:01 PM

Maybe you are looking for

  • Transferring my external drive from mac to windows

    Hi, I have been having problems w/my itunes (taking forever to update my library).  I have and use my iMac.  Since Apple doesn't help with this problem (based on my seaches through apple support here), I called Geek Squad through Best Buy.  They were

  • Download of January CPU Patch, the filename is somewhat cryptic

    I've tried to download the january cpu patch for three different o/s and when I click the download button, the file name looks right (i.e. p9952279_10105_SOLARIS64.zip), but when I click save the file name changes to a variation of letters and number

  • Link problem in flash 9

    Hello, I provide flash buttons etc for myspace users. myspace ads this bit of code: allownetworking="internal" to all embed tags. with Flash 9 in firefox, no links work. is this a flash issue? Can I submit the problem if it is? Or is there something

  • Linux - image is not available

    hi ubuntu 7.10 - images not showing!!! (imgkunde.source = k.nativePath;) this application -> works with windows ! any idea? private function loadimg():void { myFilek.browseForOpen("Open", [imagesFilter]); myFilek.addEventListener(Event.SELECT, fileSe

  • Logic now crashes at start up

    Does anybody else experience this? This just happened recently were Logic just crashes at start up. I double click on a project, Logic loads all the voices, then, crash. Is it the latest Mac version?