Pacman and closed terminal

If you start Pacman and then accidentally close Konsole (Pacman continues to run), is there any chance you can attach to running Pacman again?

You can kill pacman and restart later. If pacman is still running, the log should be written anyway.

Similar Messages

Full startup disc, applications freezing and closing down

Hi,
My computer is freezing and closing applications down. It says my startup disk is full. My HD has 120GB and 113GB of it are used. But my iPhotos and iTunes only take up approx 40GB. Where is the rest of the space?? Help topics recommended to check Consol messages; I have 3,524 but have no idea what they mean or what to do about them. For example, the latest is
06/10/2013 23:15:34
Finder[144]
pearlBrowserSelectionChanged.
Can anyone help please? Many thx in advance!

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

My internet speed keeps to be occupied when streaming video and closing the broswer!!

My internet speed is fully occupied when streaming a video and going to different points in it (walking through it) then close the tab the speed still occupied even if I close the broswer !!!! (also tried on firefox and chrome), Iam running fresh installation of windows 8.1 enterprise (updated) and my browser versions "firefox 29, chrome 34.0.1847.131m" and flash player 13,0,0,206 and only way till now to stop this is to disable and then re-enable connection from network and sharing center in windows . what's wrong! what should I do?

What you NEED to understand is that Flash Player is ONLY a plug-in for your browser.
It ONLY functions when there is Flash content in a page and ONLY when that content is called into play by a user action (you clicked Play or visited a page where the content was set to "auto play").
If your system is downloading data AFTER you've closed the browser (and subsequently terminated the plug-in), whatever is causing that download is OUTSIDE of your browser and OUTSIDE of Flash Player.
Think of it this way. You have a Blu-Ray movie playing and suddenly... there's a loud screeching sound coming from your stereo. So you stop the movie - the sound continues. You eject the BR disc - the sound continues. You disconnect the BR player - the sound continues. You turn the TV off - the sound continues. You disconnect the TV from the stereo - the sound continues. The sound CANNOT be coming from a source that is completely disabled. Flash player is like the BR Player, your browser like the TV. The data download is like the annoying sound. Something in your OS... be it a setting or even malware... is causing the download of data because a terminated browser and a terminated plug-in cannot cause it.

What will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports

what will be the peoplesoft query to calculate voluntary termination count and involuntary termination count? I am working on OBIA HR analytics workforce deployment reports and need to validate the reports. I also want to know the tables involved

Hi Andrew,
Part A:
I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
Field List:
Priority: Popup menu with six items: 00, J, D, 1, 2, 3 Defaults to 00
TL (time limit in months): Calculation: CHOOSE('Priority',0,1,3,4,6,12)
Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
Target Date: Calculation:
DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
Remaining (Days): Calculation: INT('Target Date'+1-NOW()) (see revision below)
Completed: Checkbox. Set default value to Unchecked.
Completed Date: Date: Entered manually
OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
Rsults (and some further formatting of the Layout) below.
Part B:
You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
Regards,
Barry

I was using sudo and it wouldnet let me type pass word so i quit terminal. And know terminal wont work

Now it dosent say blah blah blah macbook pro and it wont open any commands

Exactly what do you mean it wouldn't allow you to type in your password?
If you mean it did not show up as you typed it that is the way it works. It never shows any characters, no stars or letters or anything, when you are typing it in. you just type it in and hit enter. If the command works you are back at your username$
If it doesn't for any reason it will post an error.
when you say terminal doesn't work that may be because you never really closed terminal. You just closed the window terminal was using. Enter terminal and if its name is in the menu bar it is active. Go to Shell, New Window, Basic.
Does a new terminal window open?

Difference between running pm-suspend and closing the lid.

Hi!
Today i noticed this strange thing: i'm using xfce4.10 and pm-utils to suspend.
This morning i noticed that running a "pm-suspend" from my terminal, won't switch off my wireless card, while suspending with xfce buttons or closing the lid, would do it.
Why? What is the difference between these two actions (running pm-suspend and closing the lid)? As far as i know, the only difference is that there is no call to upower running pm-suspend from terminal.
ps: sorry for the subject, that is not describing the question the best!
Last edited by nierro (2012-06-17 11:03:55)

Uhm yes, i know SUSPEND_MODULES array can do it.
What i was wondering is: xfce4-power-manager uses pm-suspend to suspend. So why does it something pm-suspend alone doesn't? As i said, the only difference for me, is that that button relies upon upower too. So i suspect it is upower that switch off my wireless card, isn't it?
My question is not how can i reach the same behaviour with pm-suspend alone, but what does that button in the xfce4-panel.
I'm only curious!

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Open and closing balances std report

Dear All,
please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
Regards
Gopal.S

hi
kindly chk MB5B it will fullfill your requirement
regards
praveen.k

Service Requests Open 5 days?/Service Requests Open and Closed Today

Help!
How would I determine service requests open greater then 5 days, I use the # of Open SR's but cannot seem to get a date to work.
Also what is the best way to count the SR's open and closed on the same day?
Thanks in advance.

You need to include a TIMESTAMPDIFF function in your filter... something to the effect of
TIMESTAMPDIFF(SQL_TSI_DAY,"Service Request"."Create Date",CURRENT_DATE) > 5
Double check the column reference.
Mike L

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Font usage in CS6 Premiere , Open and Closed quotes??

Hello
I am trying to use open and closed quotes in CS6 Premiere, without any success.
Using a Mac 10.8.5.
When I try the alt shft [ and the shift [ it only uses one side of the quote.
Any suggestions?
Is this a software, settings or OS issue?
Thank you
I am working on deadline....
Brian

One side? I'm confused. You mean want these?
But you're only seeing this?

COPA reporting with open and closed projects

Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
Maddy

Dear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen.

How to open and closed posting period??

Dear Gurus,
Pls help me, how to open and closed posting period.when and how we used special period.
Regrds
Mahesh

HI,
Tcode is ob52
here we generally provide the following details
a/c type from a/c to a/c from period year to period year from period year to period
+ 1 2007 12 2007 13 2007 16
+ implies it applicable to all account types
generally we can have maximum 4 special periods and total no of periods(normal+special) should not exceed 16
generally we use special periods for year end adjustments like tax adjustments
if it is useful assign me points

Reg: Open and Closed Activities in DTR

Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
Pramod

Dear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya

Pacman and closed terminal

Similar Messages

Maybe you are looking for