Pacman and Targets

Just a suggestion for your consideration.
I like pacman and the way it evolves. Is it possible to change the way how the targets are displayed during system update?
I know that displating all the packages in a long column is not very transparent, however listing them in line is not good either.
Is it possible to list them in 2 or 3 columns in alphabetical order?
If there is more than 30 updates it is really hard to scan through this text and determin if updates are critical or not.
Cheers

Might not exactly be what you're looking for, but if you enable option VerbosePkgLists in your pacman.conf all packages will be listed with their names, versions and sizes, formatted as a table.

Similar Messages

Spawn jobs are not getting priority and target servergiven at selection scn

Hi Abapers,
I am scheduling main program as a job in backend through FMs JOB_OPEN, JOB_SUBMIT and JOB_CLOSE with priority and target server taken from user at selection screen through SE38,after executing the job,job will generate the spawn jobs (i.e child jobs). The spawn jobs also be scheduled with same priority and target server from taken user. But after completion of main job execution, the spawn jobs are not generating with same priority and target server taken from selection screen. May be its getting refreshed.
Please give me an idea how the spawn jobs also have to get the same priority and server of main job?
Please reply as soon as possible. I need it urgently.

Hi,
I have used below statements for ADD EXTRACT and ADD REPLICAT.
------Extract
ADD EXTRACT ext_1, TRANLOG, BEGIN NOW
-------Data Pump
ADD EXTRACT pump_1, EXTTRAILSOURCE /app/ggs/trail/local_trail_1/ta, BEGIN NOW
-------Replicat
ADD REPLICAT rep_1, EXTTRAIL /app/ggs/trail/remote_trail_1/tb, BEGIN NOW, CHECKPOINTTABLE ogg.tarun_chk
Yes, i have tried tutorial at Oracle Learning Library.
Thanks
Tarun
Edited by: user8886876 on Feb 12, 2012 9:56 PM

Report for production order with actual and target cost for each

Hi
Is there any report that gives me the list of all production orders in a month with its respective actual and target costs?
I can use COOIS to get a list of production orders, then double click on the prod order, then click on goto and then to cost analyis.. but can i avoid going through all this and get a report with the details i need?
thanks in advance

Thanks a lot for that.
I'm a little confused with the columns in the report.
Which columns should I keep for my requirement? -
Production Order
Total Target Cost
Total Actual Cost
Total Actual Qty
Total Target Qty
Thanks

Having custom text for 'Actual' and 'Target' in Funne chart

Hi,
We see 'Actual' and 'Target' label values in funnel chart when we hover the mouse on the chart.
But i need to change the text to custom text for SINGLE graph. I dont want to chnage any xml or config files, I need this change in single report only.
Appreciate all your posts which helps.
Regards
MuRam
Edited by: MuRam on Dec 31, 2012 7:36 PM

http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Order Quantity and Target Quantity, both as editable in Sales Order

Hi All,
We have a requirement in which order quantity and target quantity, both should be allowed as editable fields in overview screen while creating a sales order or contract. Currently, only one quantity field is editable (order quantity in sales order and target quantity in contract).
First question, is this possible?
Second, If possible, then please tell the configurations need to maintain?
Note: The material is relevant for delivery (so schedule lines allowed).
Thanks & Regards,
Vishal

Hi Lakshmi,
Thanks for the reply. I think I did not clarify the actual requirements. Let me explain it again:
I understand that generally, Target qty is in contract and Order Qty is in sales order. But actually, here query is,
When I create Sales Order (VA01), then while entering Material, user should see both quantity columns (Order Qty and Target Qty) in editable mode.
So is this possible? If yes, then please guide.
Please revert back if any further clarifications is required.
Thanks & Regards,
Vishal

PO from SO via DI API:Base document card and target document card do not ..

HI All,
I am trying to create Purchase Order from Sales Order. This is possible by GUI (on Sales Order on logistics tabs Click On Purcase Orders CheckBox.
I got the error message: -5002-Base document card and target document card do not match.
The message itself can be understandable, because the Customer and Supplier has a different CardCode.
I am sure I am using a correct code
oPo.Lines.BaseType = BoObjectTypes.oOrders
oPo.Lines.BaseEntry = sDocEntry
oPo.Lines.BaseLine = iLineNum
Where oPo is a Purchase Order document.
sDocEntry is a Sales Order docentry and iLineNum is a Line number of Sales Order
For other A/R to A/R and A/P to A/P documents are working fine.
Has anybody found this error or has anybody created application like this?
I am using sbo2007PL46
Regards,
J.

Hi guys,
this is still on the suggestion page:
Link existing Purchase Orders to (Sales) Orders via DI API : View Idea
I tryed with 9.1 PL 4 and it didn't work.

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

Issue in OWB mapping - when changing source and target database

Hi,
I need help for resolution of the issue I am facing when moving mapping from development environment to QA.
Here is situation,
We develop ETL using one source, one staging and one target database.
In development we use one control_center for Source to staging and another control center staging to target.
All works fine in development.
Now I have created new runtime repository and imported all OWB projects (with full dependencies, exact replica of development). Now I need to change source and staging and target as different database.
I have created new database location connections and defined/attached DB connectors with stage and target location.
Now issues are
1.     Two Staging mapping are not able to bound with source table (giving different error
a.     One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b.     Other mapping show error for source table/object not bound to repository
2.     All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
Not sure how to proceed from here.
I have recreated new repository and re-imported all project/mappings and defined all connection but still same issue.
Thanks in advance,
Vipin

1. Two Staging mapping are not able to bound with source table (giving different error
a. One mapping show error for source synonym translation no longer valid when deploying this mapping , but validation comes without any issue)
b. Other mapping show error for source table/object not bound to repository
The above error were resolved when re-synchronized the table (for few I have to reimport the table) and mapping.
2. All the target mapping show validation successful, but when deploying says “table or view does not exist”. But tables are exists on source stage and target. (also permission are set correctly for target user to read from staging tables).
The above error still pending. My target mapping are not able to deployed/compiled.
For the above I have defined one Staging location to one target target location and target location have connector to staging (not sure if I have to define connector name same as staging location, as I have created DB connector with different name but reference database is same as staging location).
Mapping are assoicated with desired data locatoin and meta data.
control center is also have that data location.
Mapping are configured for the desired location.

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

Not Able to Access the Properties of Workspace and Target

Hello
I have install PB 11.2 Build 9027 on my laptop ( Winows 7 (64 bit))). PowerBuilde is open and able to see the existing code.
But when I am trying to access the properties of Workspace or target for Source code control Setup, Properties will not come and nothing happen, I am not able to view the properties of Workspace and targets.
One more think I notice ,when I was trying to create new application (File > New > Target Tab > Application) then window will not open.
Please provide me some suggestion on this issue.
Thanks
Amit Maheshwari

Hi,
You might find a much larger audience for technical questions if you open a discussion at the PowerBuilder Developer Center
PowerBuilder Developer Center
Thanks,
Ben

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Source and target directory file name should be same

Hi,
How can i generate the same file name in target directory without date and Timestamp.
for eg., Source File name : yeswanth.txt
and target File name also : yeswanth.txt
Note : here source side the file yeswanth.txt is constant and whenever it moves to target directory...should be overwrite.
Reward points for useful answers.
Thanks & Regards,
yeswanth.

Hi Mugdhal,
am getting this error when i sent the same file again.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
But, here it should be overwrite the existing file.
Regards,
Yeswanth.

Error in ODI ,using source EBS and target planning

Hi,
I am in FDM ERPI integrator,source is EBS and target is Planning ,I didn't get the data from source and I got this below error,
Execution error :
java.lang.Exception :the scenario did not end properly.
at.java.lang.Thread.run(Unknown Source)
pls help me on this situation.
regards,
SV

Hi There,
I am trying to extract metadata out of EBS and target is Essbase. Everything is setup and connection working fine.
My problem is that the chart of accounts is getting built in Essbase as a flat structure? How do I get the roll ups from EBS into Essbase? Is there a certain seeting that I must choose to be able to build the Parent Child relationships?
Thanks for the help
Regards
Henk

SCCM 2012 - Pull distribution point and target PKI or HTTPS DPs

I have spent several days researching this and so far have found only a single page that even takes a stab at offering a solution.
Problem:
Trying to target an HTTPS DP when creating a pull distribution point in SCCM 2012 R2. The link that I'm referring to that does offer a workaround is here(guess I can't post a link, but it ends with the following, how-to-set-an-https-distribution-point-as-a-source-dp-for-pull-dps)
I have several problems with the proposed solution.
Is a script really the only way to proceed with something that has up till now been a built in feature with the rest of the product.
You have to provision the DP to use a self signed cert initially for it to even work, then supposedly you can add the private key to the DP later.
Does that mean I have to unbind the cert from both the pull and target/source push DP in IIS?
Powershell which would be a logical way to go, doesn't seem to make any head way(Mr. Snover I know you don't oversee configman but please push for more documentation, you've taught me to live and die by get-help. A single example for a command as large
as set-cmdistributionpoint or add-cmdistributionpoint is a shame. Perhaps my update help just didn't finish properly and I'm talking prematurely. If that is the case then I apologize!)
Is there no other solution other than build the DP with a self signed cert then run this VB script and then switch the private key later? I have read through a lot of the pull DP documentation and it makes mention of leveraging the SDK but I haven't seen
anything definitive. I would like to at the very least convert this from VB to powershell(if that script is the only option) and I know how to convert the portions where it's interacting with the site's WMI namespace (smsprovider if I'm not mistaken).
What I don't know how to do, rather don't have the chops for is what comes after. The site control file piece, I see it's also WMI and I could spend the time stepping through the different piece and just might to learn more about SCCM in the lab anyhow. I've
spent the last year getting to know powershell and have spent next to no time with VB. I know enough to recognize what a script is doing.
The environment:
The reason this is important for me is I'm about to start the production build(been all lab up till now) that is going to have just under 300 DPs in the field connected via T1 lines. They were all 07 secondary sites. I was thinking about migrating them using
the migration tool but considering the amount of work its going to take if that link is the ONLY path to target a HTTPS DP then I might as well just spend the time and manually uninstall and reinstall the field DPs. The client count in the field is an average
of 50 machines per site where there are on-prem devices... Total client count is around 25k. The primary site in the datacenter will house the majority of the site roles unless I start running into resource issues, at which time I will begin offloading site
roles to one of two more servers that I have slated for the project. No CAS, no Secondaries. SQL is co-located on the primary.
Ramblings:
I'm sure there are more people out there using PKI, and using pull DPs. How have you managed to target your HTTPS enabled DPs? Security wants this to be a HTTPS only environment, and up until now I have successfully done that. If someone could please point
me in the direction of some more thorough documentation I would be very grateful. I understand that this is a somewhat new feature, but there has to be an easier way. Perhaps powershell can cleanly do it with the set-cmdistribution point...but when I update
help and do showwindow for the command I only get one example and so far haven't found any other stories like mine with the exception of the link I posted in the beginning.
While I'm rambling, Wally there are a lot of us in the community that are going to miss your presence at Microsoft and should you read this I wish you luck with your new position. But that is a whole different topic. Thanks in advance for any links or help
you can provide. -K.R.

Yes, this is the only way, from
http://technet.microsoft.com/en-us/library/gg712321.aspx#BKMK_PlanPullDps: "However, you can use the Configuration Manager SDK to specify a source distribution point that is configured for HTTPS. To use a source distribution point that is configured
for HTTPS, the pull-distribution point must be co-located on a computer that runs the Configuration Manager client. "
Does "why" really matter , who cares? It just is. Whether it was an oversight, a coding bug, or an act of God doesn't change anything. Why does there "have to be" an easier way? And what's wrong with using the VBScripts others have
written? A script is a script is a script particularly if you've been given it already. Just because the hammer is pink doesn't mean it can't hammer the nail in.
Jason | http://blog.configmgrftw.com | @jasonsandys

Issue in mapping the same source and target fields

Hi All,
I am working on PI 7.0 and currently I am connecting to PI 7.0 via citrix desktop . Problem here is : in the mapping , direct mapping option that is available to map the same source and target fields is disabled . I do know that this is due to some java version issue .
What I want to know is there any possibilty of solving this issue without installing an updated java version ?
Regards
Vinay P.

I've faced the same for many times and all of that were due to Java version.
1st of all, you have to check the authorizations you have. If you have enough (DEVELOPER_J2EE, CONTENT_ORGANIZER_J2EE, and so), and - obvious but very often forgotten - you have to assure you're trying to change it in the message mapping change mode On.
Then, last shot should be downgrade your Java version.
The 1.4.2 JRE version allow you to use not only the Mapp the Identical field but also Dependencies, Clear Mapping and some other tools/buttons. As mentioned above, if there's a fix in the new Java releases, I do not know (hope so) and would appreciate if you could let us know.
Tks.

Pacman and Targets

Similar Messages

Maybe you are looking for