Pacman download freezes afer a while

When I try to do a full system upgrade (after three months, by the way), with -Syu, pacman just stops downloading after a short while.
Illustration:
Total Download Size: 236.85 MB
Total Installed Size: 4027.74 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
kdeartwork-4.2.2-1-i686 16.9M 78.1K/s 00:03:42 [#########################################################] 7%
kdebase-4.2.2-1-i686 23.1M 49.7K/s 00:07:57 [#########################################################] 9%
kdeedu-4.2.2-1-i686 80.4M 29.6K/s 00:46:19 [#########################################################] 33%
kdegames-4.2.2-1-i686 104.8M 18.5K/s 02:01:38 [#########################################----------------] 44%
I've been seeing that screen for the past half hour and nothing has moved. I know it's not downloading anything because my modem lights stopped flickering, too.
As you can also see, the download rate is slowing, too.
The only solution I found is to cancel it and run it again.
I tried changing the server in mirrorlist atleast five or six times with the same result.
Netstat shows a connection to the server I specified. (Incidentally, how do I see what connections a particular app making?)
Every other internet-related program works as expected, including fast downloads with wget as well as azureus.
Something similar seems to have happened to someone else, but on VirtualBox: http://bbs.archlinux.org/viewtopic.php?id=65728
What's happening? Why is it freezing?

pogeymanz wrote:I too have had it freeze up a few times. Maybe it's not pacman, but the mirrors we're using??
I doubt that the problem is with the mirrors. I spent something like an hour trying out atleast five or six mirrors, and I don't think I'd have been able to pick out only the ones that didn't work!
Anyhow, I checked this before trying: http://users.archlinux.de/~gerbra/mirrorcheck.html

Similar Messages

Photo Downloader freezes while searching device list.

Can't download photos in Bridge CC. Photo Downloader freezes while searching for device list
Someone please help with instructions. I tried to re-download Camera Raw with no change
Thanks !

I have the same problem with new late 2013 Retina 15" Mac Book Pro and Bridge CS6. With older Mid-2010-mac Book Pro it was running OK. In both cases was used the built-in card reader. Any solution?

TS3116 I download a movie and while watching it freezes or pauses. I have apple tv first generation. What is the problem? I can watch trailers just fine.

I am having problems with my First Generation Apple TV. My software is up-to-date. 3.0.2.
I download a movie and while watching in pauses and freezes for as long as a minute sometimes. I have already checked with my ISP regarding network issues. There are none. I can view trailers with no freeze or pause issues. Just the actual movie when I download. Is there something I am missing here?

You must have a slower connection if it took 2.5 hours, did you pause it or exit out to the main screen? I've paused movies many times and it resumes..it could be due to the connection as well so what is your actual speed? Check www.speedtest.net Wifi or ethernet? Have you changed the DNS settings?

HT201210 How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

How do I download iOS 6 on my iPhone? Keep getting error message saying "unable to download an error occurred while downloading iOS 6?

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use

Adobe BRIDGE CS 5 PHOTO DOWNLOADER freezes and/or stops working during download after 2 years of use. I have uninstalled/re installed twice, cleaned system, adjusted Bridge settings with no change. And I have found no helpful troublshooting tips in forum or on web.

Does it freeze with other type of cards. Have seem some post that suggest an imbedded CODEC on the flash card can cause file corruption in Bridge and Mac Finder.
To access the crash log it is officially called the event log. To access us OS Help.

Bridge CS6 photo downloader freezes and will not allow import.

Hello,
I'm running Windows 8 and CS6. Whenever I try and import images from an photo card, Photo Downloader freezes. Only way to get out of dialogue box is to X out. I cannot import or set up default folders, file names, etc.. This never happened to me on earlier versions of Bridge. Any ideas? Happy to provide more specifics if helpful or relevant.

Do you have another reader? USB dedicated to specific size is most reliable.
If not you can try from camera, although this is the most error prone.
Also, it is recommended by many that you do not delete and format card in computer, but this should be done in camera each time.

Bridge CS6 Photo downloader freezes on .mov files

Bridge CS 6 photo downloader freezes on .mov files from a T4i. To get the video files I've had to use Bridge CS5 photo downloader.
I have PS CS5, PrPro & AE CS6 if this makes a difference. Photos are no problem downloading.
Any ideas? Thanks.

I shoot both. I use Bridge & ACR CS6 to view and edit Raw files. CS5 doesn't recognise the Raw files (had to convert to dng before I got Bridge CS6). CS6 will download both Raw & Jpeg files. It hangs up on the .mov files.
I use a card reader on my Epson printer. I've cleared the cache in Bridge. How do I resfresh the prefs in Bridge?
My OS:
Intel i7 3770, Windows 7 Pro w/SP1, 64 bit, Intel 520 Series SSD, 32G RAM, 2 – 2T RAID, (1T external), GTX 550 Ti graphics
Thanks for your help.

I downloaded an album a while ago on my ipod and i had to restore my ipod and everything left, can i get the album back for free?

i downloaded an album a while ago on my ipod and i had to restore my ipod and everything left, can i get the album back for free? when i restored my ipod, all of my music left but i bought a few things, but they are not in the icloud so can i get the music back?

See Here > Download Past Purchases
http://support.apple.com/kb/HT2519

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Mid 2007 iMac 2.4GHZ. after start up the iMac will slow down to a freeze. Specially while on internet (youtube).

mid 2007 iMac 2.4GHZ. after start up the iMac will slow down to a freeze. Specially while on internet (youtube).

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

HDD Problem - Freezes for a while during linux init

I've got a problem with my HDD. My Arch usually boots like thunderbolt, but since 3-4 days it freezes for a while before login screen. So I checked dmesg and this is what I found:
[ 53.360021] ata1: lost interrupt (Status 0x50)
[ 53.360041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 53.360045] ata1.00: failed command: WRITE DMA EXT
[ 53.360053] ata1.00: cmd 35/00:18:e0:d9:46/00:00:12:00:00/e0 tag 0 dma 12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 53.360056] ata1.00: status: { DRDY }
[ 53.360075] ata1: soft resetting link
[ 53.562494] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
[ 53.628863] ata1.00: configured for UDMA/100
[ 53.628868] ata1.00: device reported invalid CHS sector 0
[ 53.628883] ata1: EH complete
[ 76.701622] fuse init (API version 7.21)
This is output from smartctl:
smartctl 6.1 2013-03-16 r3800 [i686-linux-3.9.4-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3500630A
Serial Number: 5QG1X3G1
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Fri Jun 7 11:41:09 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 095 006 Pre-fail Always - 43863857
3 Spin_Up_Time 0x0003 094 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2833
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 047 036 030 Pre-fail Always - 32856947045143
9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16160
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3563
187 Reported_Uncorrect 0x0032 016 016 000 Old_age Always - 84
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 047 045 Old_age Always - 43 (Min/Max 23/43)
194 Temperature_Celsius 0x0022 043 053 000 Old_age Always - 43 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age Always - 32213260
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 118 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 118 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:18.309 NOP [Abort queued commands]
Error 117 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 116 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:17.357 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:17.357 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:17.357 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:17.350 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 115 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:13.895 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:13.895 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:13.887 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:13.419 RECALIBRATE [OBS-4]
00 00 10 00 00 00 00 04 00:00:16.873 NOP [Abort queued commands]
Error 114 occurred at disk power-on lifetime: 15759 hours (656 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 20 01 00 00 00 e0 00 00:00:13.895 READ DMA EXT
c6 20 10 01 00 00 ef 00 00:00:13.895 SET MULTIPLE MODE
91 20 3f 01 00 00 ef 00 00:00:13.887 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 20 01 01 00 00 e1 00 00:00:13.419 RECALIBRATE [OBS-4]
00 00 01 00 00 00 00 04 00:00:13.419 NOP [Abort queued commands]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16160 -
# 2 Short offline Completed without error 00% 15759 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
It would be great if someone could help me a little to prevent some major incident and point out what's happening. Thanks in advance!

@pok0j
You best bet at getting the most uncorrupted data out of that disk, is to stop using it until you get a new disk that is at least twice as big as that one. The reason is that when you get a new disk, you want to try to do a full disk image in one go and get as much data out as possible before more data corruption occurs or the disk stops working at all.
The twice as large requirement is because you can then take your time to extract the files you want from the image and have enough free space to store them. After that make a backup strategy if you don't have one yet.
@drhill1
Has far as I know, both Current_Pending_Sector and Offline_Uncorrectable attributes start out at zero and 1) increase when there is a problem with a sector, 2) decrease when the problem is solved either by overwriting the affected sectors or when the sectors get reallocated thus decreasing the count, which should return to zero when there are no more sectors with problems. This implies that the count should never exceed the total number of user addressable sectors. Like I said, I have never seen any disk where those attributes didn't make sense, if those attributes weren't defined they wouldn't be reported I suppose.

IPhoto download freezes after 7,224 photos?

I'm trying to download about 25,000 iPhotos to a folder on my iMac external drive using Snow Leopard.
But having tried three times now, each time the download freezes around 7,224 photos with an error message saying the volume won't connect (or something).
WHY is this happening? Any clues? I read it's best to download the photos from the one machine (iMac) and then upload them from the other machine (Mac Pro). I thought I'd accomplish this using the external drive.
Thanks for any clues...
:0)

The same is happening to me. After downloading all but 123 of 1,600+ photos from my wife's iPhone to my MacBook Pro, a file error bombs out the whole download. Files actually show up in All Movies and All Image in the Finder, then they disappear after the error message pops.
I can understand if the corrupt file doesn't download, but why would Apple want to create all of this frustration by having one file (or a few files) kill the whole job. Just isolate the corrupt files and work around them.
If anyone has an automated solution to this other than manual one-by-one downloading, please advise.
Thank you.

Photo Downloader Freezes Up

Hi to all Bridge Macintosh users,
I've posted this same thing to the Adobe:Camera Raw forum, but it is probably more relevant to Bridge Macintosh forum users. That is the photo downloader freeze-up problem when you click "choose" to select a folder. It happens if you install the latest Camera Raw plug-in. You can take Adobe's advice and do an elaborate work-around that involves putting all your photos into a pre-selected folder and simply not using the "choose" button (I find that ridiculous, personally, but if you have a camera that is only supported by the newest version of ACR, you have no other choice), or you can use Time Machine to go back and find your copy of ACR 4.6.1. Once restored to its place in the Root directory:Library:Application Support:Adobe:Plug-ins folder, Photo Downloader will be restored to normal functionality. Don't bother deleting "plist" files as suggested by some forum participants. That simply doesn't work. Hopefully Adobe will have a fix soon for users with the new cameras covered by ACR 6.5. Thank you.

Somehow, I hadn't caught this:
Gary Niemeier wrote:
…Personally, I didn't grab this release candidate, as my aging Nikon D90 is well-covered by ACR 4.6.1. But for anyone who has a newer camera or lenses, Adobe now has you covered.
Gary,
Oh, that is soooooo wrong!
One should ALWAYS run the LATEST release of ACR, no exceptions. Each new release brings unheralded, unannounced and sometimes even unacknowledged bug fixes and improvements, beyond support for newer cameras.
Staying with an older version just because your camera is already supported by it is a very <euphemism>unwise</euphemism> decision.
Wo Tai Lao Le
我太老了

Photo Downloader freezes when loading device list

I'm using Bridge 2.1.1.9 on a Mac running 10.5.4. Recently, when I connect a Nikon camera to transfer photos, the Adobe Photo Downloader freezes after displaying a "Loading device list" message. I have to Force Quit the Photo Downloader to get out of this situation. I tried unchecking the Bridge Preference for "When a Camera is connected, launch Adobe Photo Downloader", and manually choosing File > Get Photos from Camera, but Photo Downloader still freezes.
This process used to work perfectly. I don't know what has changed to cause it to break. When the camera is connected to the Mac, the Mac does recognize the camera and presents its disk image on the Desktop.
Any ideas on how to fix this problem?

Andrew:
>Here's hoping Apple and/or Adobe fixes this issue someday soon, though
It is not an Apple or Adobe issue, it can happen with every platform in every application. It is more an issue that the camera picks up something that it should not or it hesitates due to power malfunction or you name it ...
There are a lot of types in camera's and even each brand has a different software version for a newer type. The card reader route is safer and also faster as Andy already pointed out.
Also after backing up raw files and converting to DNG check if the previews are working good in Bridge and after that you should format the CF card each time in the camera itself instead of deleting all or format in the computer.
And changing your workflow is also a good thing to try, every upgrade for an application has newer functions that require a new approach. I can assure you that a new approach for an old habit can be very productive :-)

Hi. I have a problem with downloading from app store while last three days. An error did mot allow me to that. It's number is 1009.

I have a problem with downloading from app store while last three days. An error does not allow me to take any app. The error number is 1009.

Thats the ugliest code I've seen in a while and may be hampering your abilities to debug it. No offense - you have to start somewhere - think of it as somewhat constructive criticism.
However, I cannot find any place where this is happening. Its happening on line 193.
Also, this only happens when you try to move certain pieces to certain squaresThat might be a clue. Try printing out the indexes before line 193 and see what happens. Maybe use a debugger to step through your code.

Pacman download freezes afer a while

Similar Messages

Maybe you are looking for