Pacman problem during installation process
Hello,
I have serious problem with installing arch on my machine, during installation packages pacman completely broke system, it prints kernel bug message, output is here:
http://pastebin.com/m70565353
its from x86_64 2009.02 image, but same problem with i686 image 2009.02 and 2008.06 too, hardware is intel little falls so nothing special, simply there is no way to install arch on my machine
thanks for any advice
I get this error every time at point Install Packages, it hangs randomly on packages, on i686 it completely locks, on x86_64 after pacman failure I can still type to terminal and possibly control installator but init 0 or 6 freeze. I tried every time on fresh created filesystem. It seems like pacman bug, next I try install some packages manually from terminal.
Similar Messages
-
Problem during installation of patch 9.2.0.5
Good morning,
I tried to install the patch 9.2.0.5 ID 3501955 but I've encoured a problem during
installation.
I've got a warning who asked me to stop somes services:
OracleMTSRecoveryService, OracleOraHome92TNSListener,
OracleOraHome92Agent et OracleServiceBETA.
After stopping it, I tried to install the patch again but I've got the
following error: "No service associated with process that use it" and
installation process stop at this point.
I would like to know if you succeed to install this patch and if you've
got an idea to fix my problem.
Regards.Did you run the catpatch.sql after the patch 9.2.0.5? You have to complete the post installation tasks as specified in the readme. We have a 9205 installation and have all the aw & awm packages in it.
regards
suresh -
Problem during installation of oacle patchset 10.2.0.2
I am facing the following problem during installation of oracle patchset 10.2.0.2 with SAP SRM 3.0 (with EBP 4.0) on HP-UX IA64. Already my system has oracle patchset 9.2.0.7 installed. Experts' opinion required urgently please..
prompt> ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1796 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_01-40-53PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-14_01-40-53PM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
prompt>hi ben. I ran the runinstaller with the debug option. This is what it gave: (might be helpful for your analysis of the problem)
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 32000 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1684 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-14_07 -42-47PM. Please wait ...unzip: cannot find ../stage/102_64/Components/oracle.s wd.jre/1.4.2.7.0/1/DataFiles/.jar, ../stage/102_64/Components/oracle.swd.jre/1. 4.2.7.0/1/DataFiles/.jar.zip or ../stage/102_64/Components/oracle.swd.jre/1.4.2 .7.0/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-14_07-42-47PM. Please ensur e that this directory is writable and has atleast 69 MB of disk space. Installat ion cannot continue.
: Error 0 -
Hello everyone!
I've a problem during installation of Itunes 10.7 on Window 7 x64. I had installed v11 but i don't like it, so i've uninstalled correctly this version and i have downloaded v10.7
The message, translated in english, is:
UNKNOWN \ Components \ ... \ 2B0163E6D0340BE2758E9BEDD8.
Make sure you have sufficient access to that key, or contact your support staff.
I don't know how to do...I don't want to format my pc
I have already tried to erase all the "apple" folders on directory C:\, but nothing to do...
Is there anybody that can help a poor italian boy, please?
Thanks a lot,
TeoThx Polydorus!
this evening i'll try and i'll tell you if it works!
Teo -
Problem during installation of EHP4 on IDES with preinstalled EHP3
I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
Last error code set: Component 'WEBCUIF' not found
When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
I need helpWhen checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
Nelis -
There was a problem during installation of blackberry messenger. Please try again
There was a problem during installation of blackberry messenger ( any application). Please try again, this is the message i get anytime i try to download or upgrade any application on my blackberry bold 9870. pls i need your help
Thanks
bellokeshibellokeshi wrote:
Blackberry appworld version: 4.0.0.63
OK, that is almost the latest version... .65 is later.
You can upgrade your AppWorld from using your BlackBerry browser to go to www.blackberry.com/appworld
After you upgrade, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
IF then you don't see or can't find the AppWorld icon, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
"Internet Mail - Problem during delivery processing" email received
Every email I'm receiving as of this morning is accompanied by an email from [email protected], entitled "Internet Mail - Problem during delivery processing"
Is this an issue on the Mac server side or a problem with my Mail app?
Many thanks in advance.My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
I have this problem with all my devices.
My wife has NOT got this problem.
We both use a [email protected] email acount.
Just compared the settings:
For "Incoming server" I have p03-imap.mail.me.com
My Wife has p02-imap.mail.me.com .... and has not got this problem.
I have setup a new rule for incoming mails (for the meantime):
move all incoming emails from [email protected] to trash and delete it.
Works fine for now,......until APPLE deals with the problem.
Message was edited by: RTONLINE -
I keep getting "Problem during delivery processing" messages
This morning I started getting "Problem during delivery processing" messages like this one...
Same problem here. And i can't fine apple support contact for submit this problem. Bad bad bad bad support page appe .
-
"Problem during delivery processing" why 3 responses every mail?
I hope someone can help with this mail problem which started on 14th February. It seems similar to problems reported with Apple mail on 7th March 2013.
This only occurs with one of our iCloud email accounts. It shows up on iPhones, iPads, and MacBook for the same apple email account. Another separate apple mail account does not have this problem!
Every time an email is received for this iCloud email account, 3 additional emails are received from [email protected] with subject "Problem during delivery processing".
Could anyone please advise on how best to resolve this problem?I have changed the personalised information with XXXX's - I hope this helps:
This report relates to a message you sent with the following header fields:
Message-id: <[email protected]>
Date: Tue, 18 Feb 2014 10:39:12 +0000
From: XXXXXXX <[email protected]>
To: [email protected]
Subject: =?UTF-8?B?VGhlIENpbm5hbW9uIENsdWIsIEJvdW5kYXJ5LCBLb2Y=?=
=?UTF-8?B?Zm1hbm7igJlzICsgbW9yZQ==?=
Processing errors occurred during delivery:
Recipient address: @nk11p04mm-lifeboat001.mac.com:[email protected]
Original address: [email protected]
Reason: Error in sieve filter: Notify mailto: recipient is not a valid address
Delivery processing continued in spite of these errors.
Reporting-MTA: dns;ms02514.mac.com (tcp_intranet-daemon)
Arrival-date: Tue, 18 Feb 2014 10:39:42 +0000 (GMT)
Original-recipient: rfc822;[email protected]
Final-recipient:
rfc822;@nk11p04mm-lifeboat001.mac.com:[email protected]
Action: delivered
Status: 2.0.0
(Error in sieve filter: Notify mailto: recipient is not a valid address)
Return-path: <[email protected]>
Return-path: <[email protected]>
Received: from st11p00mm-smtpin015.mac.com ([17.172.82.97])
by ms02514.mac.com (Oracle Communications Messaging Server 7u4-27.01
(7.0.4.27.0) 64bit (built Aug 30 2012))
with ESMTP id <[email protected]>; Tue,
18 Feb 2014 10:39:42 +0000 (GMT)
Received: from mta658.mxmfb.com ([109.68.65.8]) by st11p00mm-smtpin015.mac.com
(Oracle Communications Messaging Server 7u4-27.08(7.0.4.27.7) 64bit (built Aug
22 2013)) with ESMTP id <[email protected]> for
[email protected] (ORCPT [email protected]); Tue,
18 Feb 2014 10:39:42 +0000 (GMT)
Received: by mta657.mxmfb.com id h0cs6o17kaov for <[email protected]>; Tue,
18 Feb 2014 10:39:12 +0000
Received-SPF: pass (st11p00mm-smtpin016.mac.com: domain of
[email protected] designates 109.68.65.8 as
permitted sender) receiver=st11p00mm-smtpin016.mac.com; client-ip=109.68.65.8;
helo=mta658.mxmfb.com;
[email protected];
x-software=spfmilter 0.97 http://www.acme.com/software/spfmilter/ with
libspf-unknown;
Date: Tue, 18 Feb 2014 10:39:12 +0000
From: XXXXXXXXXX <[email protected]>
Subject: =?UTF-8?B?VGhlIENpbm5hbW9uIENsdWIsIEJvdW5kYXJ5LCBLb2Y=?=
=?UTF-8?B?Zm1hbm7igJlzICsgbW9yZQ==?=
To: [email protected]
Reply-to: [email protected]
Message-id: <[email protected]>
MIME-version: 1.0
X-Mailer: MXM-v5-MailEngine
Content-disposition: inline
x-icloud-spam-score: 33022
f=news.XXXXXXXX.com;e=news.XXXXXX.com;pp=ham;spf=pass;dkim=?;wl=absent;pwl=absent
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.11.87,1.0.14,0.0.0000
definitions=2014-02-18_03:2014-02-14,2014-02-18,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
suspectscore=100 phishscore=0 adultscore=0 bulkscore=100 classifier=spam
adjust=0 reason=mlx scancount=1 engine=7.0.1-1401130000
definitions=main-1402180028
Authentication-results: st11p00mm-smtpin015.mac.com; dkim=none
reason="no signature"; dkim-adsp=none -
TS4002 Problem during delivery processing
Since 08:00 UK time Thursday 7 March 2013 I receive an extra email with everyone hitting my icloud account marked:-
Problem during delivery processing
Hope its fixed soon, my inbox is filling fast!Since 08:00 UK time Thursday 7 March 2013 I receive an extra email with everyone hitting my icloud account marked:-
Problem during delivery processing
Hope its fixed soon, my inbox is filling fast! -
Hi All, since 6:52 Uk time I have received email notifications for all emails that I have received.
The email notification is 'Problem during delivery processing'
The reason given 'Error in sieve filter: Notify mailto:recipient is not a valid address'
Then 'Delivery processing continued in spite of errors'
So Im getting all email, but a notifictions for all of them. Is this happenring to anyone else. Is it a known issue? Any help greatfully recived.
Many thanks.Having the same issue. Started this morning. There is something at the end about Proofpoint virus protection. Not just one email. Several. They all have this at the end. Several emails from the county where I live. Got the messages but also this. Anyone know about this?
Apparently, I got an email from my mail order prescription service at my .mac address, but didn't get it. This is what it says at the end:
Message-id: <[email protected]>
MIME-version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
ipscore=0 suspectscore=3 phishscore=0 bulkscore=0 adultscore=0 classifier=spam
adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
definitions=main-1303070066
X-Name-Header: [BOB] EXP Order Receipt
X-Name-Body: [BOB] EXP Order Conf Postal
X-Name-Footnote: [BOB] Web Footnotes
X-Name-Footer: [BOB] EXP Footer 2
X-Name-Cobrand: BOB
X-Name-BrandId: 00
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
Then another from my son's BS troop:
Reply-to: Troop 859 EBlast
Message-id: <[email protected]>
MIME-version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure
engine=2.50.10432:5.9.8327,1.0.431,0.0.0000
definitions=2013-03-07_01:2013-03-07,2013-03-06,1970-01-01 signatures=0
X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0
ipscore=0 suspectscore=10 phishscore=0 bulkscore=0 adultscore=0
classifier=spam adjust=0 reason=mlx scancount=1 engine=6.0.2-1302030000
definitions=main-1303070051 -
Problem during installation of SAPNW2004sABAPTrialSP11
Hi all,
I tried to install SAPNW2004sABAPTrialSP11 on my PC. The installation process ended with success after 1 hour but unfortunately when I tried to logon from SAPGUI the system it doesn't work. In particulary the message that occurred was more or less the follow one: "shut down application server".
Is there anybody that can help me?
Thanks
Gino BonfiglioliHi Sunil,
I tried to install SAPNW2004sABAPTrialSP11 again but the sams error occured. The message that I see after the SAPLOGON is the following one:
"Partner not reached (host 127.0.0.1, service sapdp00)
WSAECONNREFUSED:Connection refused"
Here down I send you the file you asked me last time:
<b>dev_disp:</b>
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 3524
Sat Apr 28 17:40:27 2029
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3524) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat Apr 28 17:40:32 2029
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >PC_Gino_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E30040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E30040
DpShMCreate: allocated wp_adm at 04E31A28
DpShMCreate: allocated tm_adm_list at 04E332E0
DpShMCreate: allocated tm_adm at 04E33310
DpShMCreate: allocated wp_ca_adm at 051A35A0
DpShMCreate: allocated appc_ca_adm at 051A3A50
DpShMCreate: allocated comm_adm at 051A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05224DB0
DpShMCreate: allocated gw_adm at 05224DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05224E20
DpShMCreate: allocated wall_adm at 05224E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Sat Apr 28 17:40:33 2029
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sat Apr 28 17:40:35 2029
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( PC_Gino) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >PC_Gino_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
Sat Apr 28 17:40:36 2029
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Sat Apr 28 17:41:15 2029
ERROR => W0 (pid 1980) died [dpxxdisp.c 14318]
ERROR => W1 (pid 248) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3820) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 268) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 3608) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3948) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 272) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:25 2029
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Apr 28 15:41:25 2029
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1980 Ended no 1 0 0
1 DIA 248 Ended no 1 0 0
2 DIA 3820 Ended no 1 0 0
3 UPD 268 Ended no 1 0 0
4 ENQ 3608 Ended no 1 0 0
5 BTC 3948 Ended no 1 0 0
6 SPO 272 Ended no 1 0 0
Dispatcher Queue Statistics Sat Apr 28 15:41:25 2029
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Sat Apr 28 15:41:25 2029
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Apr 28 15:41:25 2029
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:30 2029
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >PC_Gino_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1704) (SOFT_KILL)
Stop icman
killing process (1848) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1704 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:31 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1704 HANDLE:1580)
wait for end of icman
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:32 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:33 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:34 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:35 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:36 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:37 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:38 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:39 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:40 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:41 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1848 HANDLE:1596)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1617
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Apr 28 17:41:42 2029
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1848 HANDLE:1596)
DpStartStopMsg: send stop message (myname is >PC_Gino_NSP_00 <)
NiIMyHostName: hostname = 'PC_Gino'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sat Apr 28 17:41:43 2029
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1544 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1544 (pos=2)
SiSelNRemove: removed sock 1544
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1544
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
Sat Apr 28 17:41:44 2029
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3524) [dpxxdisp.c 10333]
Good Bye .....
<b>dev_w0</b>
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Apr 28 17:40:36 2029
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 1980
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1980) [dpxxdisp.c 1301]
I
I Sat Apr 28 17:40:37 2029
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04E30040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04E30040
M DpShMCreate: allocated wp_adm at 04E31A28
M DpShMCreate: allocated tm_adm_list at 04E332E0
M DpShMCreate: allocated tm_adm at 04E33310
M DpShMCreate: allocated wp_ca_adm at 051A35A0
M DpShMCreate: allocated appc_ca_adm at 051A3A50
M DpShMCreate: allocated comm_adm at 051A3F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05224DB0
M DpShMCreate: allocated gw_adm at 05224DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05224E20
M DpShMCreate: allocated wall_adm at 05224E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PC_Gino
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C
C Sat Apr 28 17:40:38 2029
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0 BUILD 036-123-140-088
C SQLDBC client runtime is MaxDB 7.6.0.036 CL 140088
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Location part contains characters which must be escaped))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Location part contains characters which must be escaped) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PC_Gino_NSP_00 on host PC_Gino (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sat Apr 28 17:40:38 2029
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1980) [dpnttool.c 327]
<b>dev_rd</b>
trc file: "dev_rd", trc level: 1, release: "700"
Sat Apr 28 17:40:34 2029
***LOG S00=> GwInitReader, gateway started ( 1704) [gwxxrd.c 1693]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 1704
gateway runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
Sat Apr 28 17:40:35 2029
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Monitoring Architecture disabled, MoniSegmentSize too small: 0 bytes.
ERROR => CCMS: unable to connect to montoring segment of application server! [alxxappl.c 990]
ERROR => GwInitAlertMonitor: AlInit_R3Kernel_AS failed, rc=249 [gwxxalrt.c 222]
***LOG S10=> GwInitReader, GwInitAlertMonitor () [gwxxrd.c 1825]
switch off alert monitoring
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [10.10.0.10] PC_Gino (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 030C0040, size: 4205552)
DpShMCreate: allocated sys_adm at 030C0040
DpShMCreate: allocated wp_adm at 030C1A28
DpShMCreate: allocated tm_adm_list at 030C32E0
DpShMCreate: allocated tm_adm at 030C3310
DpShMCreate: allocated appc_ca_adm at 03433A50
DpShMCreate: allocated comm_adm at 03433F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 034B4DB0
DpShMCreate: allocated gw_adm at 034B4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 034B4E20
MtxInit: -2 0 0
Sat Apr 28 17:41:30 2029
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 14147]
Thanks the help you will give me
Gino Bonfiglioli -
Problem During Installation of ECC 6 on Windows 2003
<b><b>Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
</b></b> <b></b>run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich -
Problem during installation of Solution Manager
Hi All,
I am facing problem during the installation of solution manager. it shows following error during installation
ERROR 2010-05-21 14:39:24
FJS-00003 TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
ERROR 2010-05-21 14:39:25
FCO-00011 The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?Hi Chandan,
Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
Hope it will work for you..as well ! -
Problem during installation of NW7.0 SR3 on Windows x64
Hello all,
I have a problem during the installation of a new central instance.
During the phase 38 "Install Software units", SAPINST shows that logs :
Jul 30, 2008 1:41:10 PM Info: Ending deployment prerequisites. All items are correct.
Jul 30, 2008 1:41:11 PM Info: Saved current Engine state.
Jul 30, 2008 1:41:11 PM Info: Starting: Initial deployment: Selected development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5' will be deployed.
Jul 30, 2008 1:41:11 PM Info: SDA to be deployed: D:\usr\sap\PAD\DVEBMGS00\SDM\root\origin\sap.com\caf\eu\gp\model\eap\MAIN_APL70VAL_C\5\1497904\cafeugpmodeleap.sda
Jul 30, 2008 1:41:11 PM Info: Software type of SDA: J2EE
Jul 30, 2008 1:41:11 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Info: Begin of log messages of the target system:
08/07/30 13:41:11 - ***********************************************************
08/07/30 13:41:12 - Start updating EAR file...
08/07/30 13:41:12 - start-up mode is lazy
08/07/30 13:41:12 - EAR file updated successfully for 250ms.
08/07/30 13:41:12 - Start deploying ...
08/07/30 13:41:12 - EAR file uploaded to server for 93ms.
08/07/30 13:41:13 - ERROR: NOT deployed. The Deploy Service returned the following error:
For detailed information see the log file of the Deploy Service.
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
08/07/30 13:41:13 - ***********************************************************
Jul 30, 2008 1:41:13 PM Info: End of log messages of the target system.
Jul 30, 2008 1:41:13 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 30, 2008 1:41:13 PM Error: Aborted: development component 'caf/eu/gp/model/eap'/'sap.com'/'MAIN_APL70VAL_C'/'1497904'/'5', grouped by software component 'SAP-EU'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.14.0.20071210153525''/'5':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: ERROR: NOT deployed. The Deploy Service returned the following error: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
Exception is:
com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
Nested exception is:
java.net.SocketException: Connection reset
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:395)
at java.lang.Thread.run(Thread.java:534)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Jul 30, 2008 1:41:13 PM Info: Starting to save the repository
Jul 30, 2008 1:41:13 PM Info: Finished saving the repository
What can I do to validate that step ?
Thanks in advance,
Edited by: Alexandre Belgrand on Jul 30, 2008 1:48 PMHi,
I had same problem.i resolved it by reinstalling OS and configuring high Page file.
Please set the max and min Page file size of same value.
and also do the java memory tuning as per SAP Notes.
Regards,
Sandeep Nayak
Maybe you are looking for
-
How do I get my contacts back on to my PC?
How do I get my contacts back onto my PC? It seems that iCloud took them off of my computer and has them all for itself!
-
Single click opens mail?
When I am using Mail and I click on a new mail item one time (intending to view it in the lower half of the panel) it opens in a new window? I do not want it to open the message in a new window unless I double click it. Which is what I would ordinari
-
Hello all, Need a little help, I have implemeted a program which creates an XML file after an DTD(eq. BMEcat). How a validation can be implemented in this report which check if the XML file is well formed after the DTD? To mention that for creating t
-
Re: Console displaying incorrect info about cluster
What if you restarted your admin server with discovery flag turned on? Will server B "rejoin"? Gene "Nathan" <[email protected]> wrote in message news:3b2e09c6$[email protected].. > > I have three servers in a
-
WTC example...
Hello, I'm trying to deploy in weblogic WTC. Anyone know where I can download the examples documented in order to test BEA Tuxedo services?. In BEA were called "wtc_toupper.jar" ...