Pacth EA-APPL 600 in ECC6.0 with enhancement 2

when I patch EA-APPL 600 with SPAM ( Version 39), it cannot show prerequistion 2. It can only show prerequistion 1.
So it require SAP_APPL 600 with patch 4, but my system is SAP_APPL 602.
Any one has solution for this issue?
Thanks a lot.

Hi Amy,
I belive you need to apply the attribute change package as per
1118803 - ECC 600 Support Packages and ERP enhancement packages
After this you will be able to define the queue, because the
component SAP_APPL 602 will be accepted.
With Best Regards
Julia

Similar Messages

What app do i need for my epson 600 printer to work with my ipad

what app do i need for my epson 600 printer to work with my ipad

Hi,
You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ?
http://support.apple.com/kb/ht4356
If Yes, please follow this checklist and fix:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If No, check with Epson
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ECC6 EHP4 with IS Insurance component

Hi,
We have currently a ECC6 (SAP Neatweaver 2004s)system with us.Now we want to add sap component IS insurance & then want to upgrade this system to EHP4. Could anyone please tell me should i add the IS insurance component now or after the upgradation of the system to EHP4.Again Should i first upgrade the system to EHP1,then EHP2 ,then EHP3 or then EHP4 or i will upgrade the system directly to EHP4.Thanks
Kind Regards,
Jituda

Hi,
You can upgrade your ERP system directly to EHP4 from SAP 13 level. Right now, EHP4 SPS5 is available. This the latest patch level in EHP4 upto which you can go. I will suggest you to go through upgrade guide.
also, check SAP Note 1118803 - ECC 600 Support Packages and ERP enhancement packages
Note 1165437 - Enhancement package 4 for SAP ERP Required support packages
Note 1143022 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Thanks
Sunny

Multiple Apple Remotes no longer work with Apple TV!

I've been using Apple TVs since the minute Steve Jobs introduced them in 2007. I bought the 2nd and 3rd Generation Apple TVs the minute each of them were introduced. I've been watching every Apple Keynote Address since they were available online or on CDs from the early 1990s, on my HDTV via my latest Apple TV when that was possible. I watch far more TV through my Apple TV than via my Cable Box, much of it music and music videos from iTunes on my 2006 Mac Pro! But as of YESTERDAY I am seriously thinking of getting another, ANY OTHER manufacturer's similar internet streaming box!!!
WHY??? Because YESTERDAY, for no apparent reason except some programmer's or software engineer's stupidity, my Apple TV stopped working with all but ONE of my Apple REMOTES!!!
Why is that stupid? Because, in my household there are three people who use Apple TV all day, and each of them have an aluminum Apple Remote which they all use to control what the Apple TV is streaming. We have two other Apple Remotes lying around in case one of us misplaces his or her Apple Remote, which happens occasionally. ALL FIVE of the Apple Remotes, just like the beige plastic Apple Remotes that they replaced, always worked with all three of my Apple TVs! Then yesterday, suddenly, only the LAST Apple Remote that was paired with this 3rd Generation Apple TV is able to control it.
I've spent HOURS trying to fix this. This wasn't caused by an Automatic Update to the Apple TV's iOS; there has been no update in recent days. I've got Automatic Update turned on, just as I, a good Apple citizen, have my Apple TV set up to automatically send back Usage Data to Apple. I've rebooted my Apple TV. I've put brand new 2032 button batteries into my Apple Remotes. I pulled the power cord out of my Apple TV for 15 seconds and again for five minutes and then restarted it. As per instructions, I have Unpaired and re-Paired each and all of my 5 Apple Remotes. All to no avail. Only the last Apple Remote that was paired with the Apple TV works! Horrible. And STUPID, if it was a deliberate programming decision and it was introduced in a minor automatic update.
Worse, I've been using the Remote app on my 5th Generation iPod touch to replace ONE of the unusable Apple Remotes, and as of a couple of minutes ago even THAT stopped working with my Apple TV! Well, I was able to fix that fairly easily by pairing the iPod touch Remote app with my Mac Pro and then pairing it again with my Apple TV. But I don't think that solution would be so easy for many non-technologically-inclined users. I also don't think that a $200 or $300 iPod touch is a very acceptable replacement for a $20 Apple Remote, especially since everyone buys iPod touches for totally different uses (I use mine primarily for taking notes using voice-activated audio or video -- it is by far the best device for that purpose out there -- police departments should take note).
I'm hoping that this multiple Apple Remote problem somehow resolves itself, unless it is a hardware problem with my Apple TV. If so, I can hold out until Apple's media event next week, which I HOPE will premiere a new 4th Generation Apple TV, hopefully which will once again allow my five Apple Remotes to all control my Apple TV interdependently, without having to Unpair and Pair each one each time you wanted to use it, requiring you to quit whichever Apple TV app you were using each time, or alternatively to use Sneaker-Net to deliver the one working Apple Remote to each person who wants to use it, which can be difficult since at least one of the users is very ill! (Whew! A long sentence. But I hope you get the point.)
Two days ago, I could never have imagined myself getting a Roku or an Amazon, Sony, Microsoft or some other streaming device. It just proves how fast a stupid little decision (if it was deliberate) can turn EVERYTHING around!

People have a misconception with remote pairing (as does the description on this page -> Pairing your Apple Remote with your computer - Apple Support).
The 1st paragraph is incorrect.
The 2nd paragraph is correct.
"If you have several Mac computers or an Apple TV that use the Apple remote, or other devices with integrated infrared ("IR") receivers in one room, you can "pair" your Apple Remote with a specific Apple device so it doesn't interfere with other Apple devices or IR devices nearby.
Pairing allows you to set the receiving Apple device so that only it can be controlled by one remote. Learn how to pair your Apple Remote"
Pairing sets the device to read only a specific remote.
It does not set a specific remote to work only with a specific device. ie. if you point th remote at another Apple device (that is not paired) it will control it.

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4

Is there a way that i can downgrade my iOS 7.1 on my iPhone 4 to iOS 6xx? battery life not good, and performance isn't better than iOS 6.. Please apple i am really disappointed with iOS 7 on my iPhone 4, it can runs great on iPhone above 4 such as 5/5s/etc.. iPhone 4 just good with iOS 6...

No.

How do i sync my apple id on my iphone with updated icloud id

How do i sync my apple id on my iphone with updated icloud id?

Settings > iCloud.
Delete the account the re-add with new AppleID.

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

Apple Tv does not work with youtube and movies on iphone or ipad

I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
I think it started about a month ago. I can only use Netflix.
If I try YouTube and select a video (even if small) it just keep spinning and never starts.
The same thing happens with my video from iphone 5S, 5, and ipad 2.
Than I went to my sons house with a Apple TV 3rd generation and different wifi,
same thing happens, I can not show a video from my iPhone 5S.
What is going on, did Apple TV change something?
Is this a update that went wrong?
(I have auto update and also checked manually to make sure have latest apple TV FW)
(All iphone and ipads are latest FW).

Hi pcorsaro,
You may need to restore your Apple TV and see if the issue is resolved after that process:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

Apple loops not getting saved with current projects tempo

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Apple loops not getting saved with tempo info

I can't seem to make an apple loop that would get saved with the current projects tempo....i recorded a single bar midi drum loop with 130 as project tempo but when i save it as an apple loop it gets saved with a tempo of 92bpm. strange thing is when i drag the same loop back on a instrument track it plays at the current tempo i.e., at 130bpm but if i drag it to an audio track it plays at 92bpm... really stuck here....any help would be greatly appreciated..thanx..

ok now i have got half of the problem solved....i had left the "follow tempo" region parameter ticked....so now when i unticked it the loop follows the project tempo....but i dont understand y does the loops get saved with a tempo of 92 whereas the project tempo is 130bpm....moreover when i audition these loops they don't really LOOP while playin back....

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address. I can't get rid of my "work" email address on my iPhone 4S

My iPhone is using my work email to sign in to the cloud, but my apple id and password are with my "personal" email address. I can't get rid of my "work" email address on my iPhone 4S

Hi Sister Kate,
If you change the Apple ID you are using on an iPhone or other iOS device, there are several places you need to change it on the device. See this article -
Apple ID: What to do after you change your Apple ID
Thanks for using Apple Support Communities.
Best,
Brett L

How to connect apple tv to normal speakers with 3.5mm jack?

I have recently brought apple tv, it works great with my tv. But I have optoma HD200x projector which, I think, don't have audio out. I understand that I need optical audio cable to connect it to speakers but I have JBL radial speakers with 3.5mm jack. Which cable is required as no optical audio port on jbl dock.
Thanks

You need to connect optical to a DAC that can output analogue stereo (serach for monoprice here) or have an amp/speaker that acepts optical.
Assuming you'll hook up HDMI to the Optoma it's worth considering whether or not thsi convertes HDMI audio and has an analogue 3.5mm or RCA jack out (or headphones socket) - that might work but would entail an extra lead from the projector.
AC

Can I use the Apple ADC to DVI adapter with a VGA monitor?

Hey everybody,
I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
a VGA to ADC converter will drive the ADC display directly
<http://www.gefen.com/kvm/product.jsp?prod_id=1301>
If you have the Apple DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
you could use it with a VGA to DVI converter
<http://www.gefen.com/kvm/product.jsp?prod_id=1310>
It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
<http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

Pacth EA-APPL 600 in ECC6.0 with enhancement 2

Similar Messages

Maybe you are looking for