Padsticker remove entry problem
I use Padsticker 184 on E63. If I select an entry and select Menu - Record - Remove, PS remove another record instead of the previously selected one. Does any E63 owner who uses Padsticker see this issue, too?
E63-1 (410.21.010)
3110c (07.21)
Padsticker
http://batu35.googlepages.com/index.html
Pimlical
http://www.pimlicosoftware.com
I downloaded PS, perhaps twice, by using my 3110classic last year. Then, the developer of PS sent the later versions as the attachment of emails since I reported some bugs and request some features. The 184 I use was also sent by him and I installed it via data cable from PC to 3110c and E63. I am not sure if I will try downloading it using E63. I am afraid if the newly downloaded will overwrite the 'registry' of the existing one and PS becomes unregistered. I am not sure.
E63-1 (410.21.010)
3110c (07.21)
Padsticker
http://batu35.googlepages.com/index.html
Pimlical
http://www.pimlicosoftware.com
Similar Messages
-
Remove entries from the "Open with" menu?
I'm using openbox as a window manager and while trying to open some specific zip files I did the right click, open with, and then chose a few different programs.
The problem is that now everytime I right click a file of the same extention the menu includes the programs I selected from before. Here's an example of what it looks like
Open
unzip
7-Zip FM
Archive Manager
File Manager PCMan FM
Open With
Cut
Copy
and so on. My laptop screen has quite a small resolution and the menu flows off the screen which is getting really annoying. Is there a way I can remove entries on the menu, and just keep Archive Manager, making the menu smaller?
Thanksyou need to edit your mime list:
~.local/share/applications/mimeapps.list
or install mime-editor or xfce4-mime-settings -
Auxiliary account assignment to asset not possible, remove entry
Hi!
While I am going to post Asset Sale, it is giving me following error :
Auxiliary account assignment to asset not possible, remove entry
Message no. AA449
Please suggest me.
Regards
ParthaHello Partha,
I kindly ask you to refer to Note 787350. As per this note says:
You can carry out an asset account assignment outside of fixed asset
reconciliation accounts in the following exceptions:
o Down payments on the credit side and their clearings
o Fixed asset retirements via FB01
In the case of an asset retirement,as you can see in the note, you won't be able to use transaction F-92, you should use transaction FB01 instead.
Note 787350 explains that this has always been an error which is now resolved. Either you disable that note at your own risk or you accept the situation where the error message AA449 is sent correctly.
In FB01 if you want to avoid error AA449, do not enter asset in the asset field (field should not be required) and mark the flag u201CAsset retirementu201D.
This should help to resolve your problem
Best Regards,
Vanessa Barth. -
Auxiliary account assignment to asset not possible, remove entry Message no
Hi!
While I am going to post Asset Sale, it is giving me following error :
Auxiliary account assignment to asset not possible, remove entry
Message no. AA449
Please tell me what will be problem.
RakeshHi,
Please give me wht says SAP note:846858. I too getting same error.
Regards
Partha -
Pacman: could not remove entry from cache
Hi,
I've been getting "error: could not remove entry 'openbox' from cache" message while trying to uninstall openbox. Why?Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse. -
Hello,
We had 7 database instances running on a server and now that server is down and database are tear down. Before this, we forgot to unregister/delete backup for these databases from recovery catalog.
Using DBID for it, I could remove it from catalog.
RMAN> SET DBID 487194766
executing command: SET DBID
database name is "GWMPI05" and DBID is 487194766
RMAN> UNREGISTER DATABASE;
database name is "GWMPI05" and DBID is 487194766
Do you really want to unregister the database (enter YES or NO)? YES
database unregistered from the recovery catalog
RMAN>
But these doesn't seem to be removing entry from catalog. I don't have target database any more so can not issue "delete backup".
So is there any way to remove entry/backup of this database from catalog ?Hi,
The catalog only holds metadata the actual backup resides on disk or tape.
The unregister action does a cascading delete inside the catalog for a specific db_id so all metadata should be removed.
If you want to remove actual backups from disk you need OS commands.
Deleting from tape is most of the time not worth the effort just wait till everything is expired and than recycle the tapes.
Regards,
Tycho -
Remove entries from Global Address List
Hello,
Does anyone know of a way to remove entries such as orcladmin, portal_admin, sysadmin and other system accounts from the Global Address List? It would be nice to remove them from the GAL, but I don't want to change the functionality of each account. Thanks for the help.
--BillNevermind, I figured it out. If you add the line "gal_enableldapsearch = FALSE" to the "[ENG]" section of the calendar server configuration file, it will only put calendar users in the GAL and not search OID for users.
--Bill -
Auxiliary account assignment to asset possible remove entry
While selling f-92 asst sale iam gettign this error Auxiliary account assignment to asset possible,remove entry.
Please guide me on thisHi,
While doing F-92, you are not supposed to enter the asset no in Clearing Rev from Asset Sale GL line item. Instead you need to select check box Asset Retirement(just above text field) for the same line item and press enter, then system will prompts with another pop up window, where you need to enter the selling asset no and value date and Complete sale and ENTER.
Cheers,
Srinu -
Remove entries from safary reading list?
Does anybody know how to remove entries from the safary reading list?
Swipe horizontally on the item you want to delete (left to right or right to left) and a Delete button appears. Then click Delete.
-
Removing compiler problem markers
Does anybody know why I keep getting a pop up window that is
telling me it can't find a marker id at some location number? I am
getting one of these messages about every other time I save and
compile and it is getting RATHER ANNOYING!!! What does it mean and
how do I eliminate it???
Thanks in advance for helping me lower my blood pressure!!!
Have an Ordinary Day...
KomputerMan ~|:-)Yes, I am now getting the same error - but slightly different
wording
Removing compile problem markers (Time of error: blah blah
blah...)
The details section states:
An internal error occurred during "Removing compiler problem
markers".
java.lang.NullPointerException
I'm able to compile the same code with no problem from the
command line on a Linux box. Running the clean comand doesn't fix
this unfortunately.
Some background info: I'm running a FDS project against a
JBoss server on a windows XP machine.
So, I deleted my project and shut down flex builder. Then
removed the project files (.actionScriptProperties, .project, &
.flexProperties) and removed the project folder from the flex.war
folder in the jboss server. Restarted Flex Builder and created a
new project the same way the project was built. And wa-la the
problem is gone.
So, something has gone bad with the project, but I am not
sure what because a look a the previous project files and they all
seem normal. I was having problems with the project trying to
create the "Output Directory" early, but a rebuild of the project
seemed to fix that too.
hope this helps.
--Andy -
07 Depreciation Area Accouting Entry Problem.
Dear All,
I am facing 07 Tax Depreciation Area Journal Entry Problem.It would be of Great help if You Provide your Valuable Suggestion / Comments.
The Net Effect is Correct for the Entry but Presentation is not Right.
I am getting this entry in SAP 07 area for std cost.Assset Cost is 210.
Dr T23056 210
Dr E23057 90
Cr E23057 -300
I want E23057 Account also to be Credited by 210 instead of -300 & again debit to Same Account by 90.
Pls suggest Where I am missing in Configuration.
Thanks & Regards,
PankajHi,
Check your COD config.
I hope you are having 01,02, 03 and 07 as dep areas in your COD.
First set your COD with OAPL.
Use transactions OADB, and OADC.
in OADB give posting in GL as 1 for dep areas, for which you want to adopt values to GL. For other areas put 0 in posting to GL, and select real dep area for all the areas.
in OADC specify your dep area type for all the dep areas.
Now OABC and OABD.
Put proper settings for each dep area according to SPAIN country regulations.
Thanks,
Srinu -
We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!
We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!
-
How to remove entries from the new auto-complete ?
Firefox 33 came with a new auto-complete for forms. Unfortunately I cannot seem to delete the auto-complete suggestions once they have been stored. This is necessary functionality for things like mis-spelled words, where you want to get rid of the old (bad) auto-complete entry, or where username was changed on a form, etc. With the older versions, you could just press delete key on highlighted auto-complete suggestion and it would be removed, but this functionality does not work with the new auto-complete. The only workaround I have been able to find so far is to clear the browser history for the last 1 hour, but that wipes out good history as well as the error.
Hello,
Can you '''try Firefox Safe Mode''' and see if you have the same problem there? [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
How to remove entries from the plot legend?
Hello,
I have got a waveform graph to display measurement data. Sometimes there will be 40 plots shown. The plot legend also expands to 40 and I limit the number of elements shown in the Plot legend and I have activated the vertical scroll bar. Of course 40 plots are too many to work with. So the user has the ability to select plots to be shown. Now I want to decrease the number of elements in the plot legend as well. But if there were once 40 elements the plot legend remains in this size and the vertical scroll bar indicates that there are more elements than shown even if there are only e. g. two plots in the graph.
I don't want to increase and decrease the number of plots shown in the plot legend programmatically each time the user changes the number of plots shown. Secondly the plot legend shall have a maximum number of 20 elements (otherwise it would exceed my front panel). So I don't want to programmatically check whether to show the vertical scroll bar or not.
The legend should look like a partially filled array with grayed out elements.
How do I do this?
Is there a simple way to clear the plot legend and remove all entries?
Regards, JörnHi Suse,
your example does not exactly solve my problem. I wanted the plot legend always to show 10 legend entries.
But it helped me to find the solution: set LegNumRows to 10 and set LegPlotMin to the number of plots in the Graph (see attached example).
One thing is still missing: setting the plot number currently at the top of the legend. If you run the attached example with 30 plots shown, scroll the legend down and run the VI once again with 3 plots shown then you will see no plots in the legend despite the fact that all could be shown. You need to move the scroll bar first to see the 3 elements.
Best regards, Jörn
Attachments:
Graph_Plotanzeige.vi 12 KB -
Remove entries from the network services list?
So I used to run Missing Sync so I could get my crappy Motorola Q to (sorta) talk to my Mac. Ditched it, got an iPhone. Removed it from my system.
But in the Network system preferences pane, in the lefthand column that lists all of my "services," there are 37 duplicate entries, all created by Missing Sync - they're labeled "Missing Sync for Windows Mobile (en3)".
And I cannot delete any of them. Selecting one and clicking on the remove button does nothing. I can rename them to whatever I like. I can disable them, which grays them out...but they're still there.
Does anyone know how I can purge them from my system?
Thanks.Hi,
Just wondering if you were able to solve the problem because I have the exact same problem! Tried installing and un-installing the program a gazillion times; all in vain.
Also used Pacifist to figure out all the places the program was throwing its crap and took all that stuff out ... still can't get rid of those network entries ...
Any help would be greatly appreciate!
Thanks!
- Archit
Maybe you are looking for
-
Is there a way to bring back the actual tab "bar"?
So in switching from FF3.6 to 5.0 I have noticed that the actual "bar" that holds the tabs is gone. Observe: [http://i.imgur.com/eU7lo.jpg http://i.imgur.com/eU7lo.jpg] It's visually slightly annoying to not have a distinct separator between the tab
-
Header Error when importing Wav files
The problem I'm experiencing is that Premiere CS6 will not import my Wav audio files. When I try to import them it gives the following message and fails to import the file: "The file cannot be opened because of a header error". The original audio fil
-
How to display the data according to the search criteria
Hi , I want to display the order data in my application. I have certain search criteria in my application like ordernumber , date etc. If I click the submit button without giving any criteria , all the data is getting displayed properly in the table.
-
Can't use multi-touch in macbook air on windows 7
i just install windows 7 via bootcamp and install the bootcamp windows support. everythng seems fine, but the trackpad.... I can use scroll up and down, but i can't tap to click.. and i can't find the bootcamp in windows 7 start manual. anyone can he
-
Installing J2EE Patches during WAS installation
Hi Himanshu Limaye here. I am <b>currently installing J2EE patches using SAPCAR utility.</b>However one of the .sar files is not getting uncarred properly. <b>The file name is: J2EERT15_0-10001982.SAR</b> I <b>repeated the procedure</b> by again down