Page as landscape or potrait

Hi All,
Based on some conditions I need to do thew following -
a) Make the adobe form landscape or potrait dynamically
b) Select the paper type dynamically  (eg letter, tabloid etc)
Can anyone please let me know if this can be done using adobe forms and how do I go about doing it.
Thanks in advance,
Vivek

I assume you want to do this in a single form. You´d better don´t even try. Even if you would be able to manage and create it, nobody will be ever able to change such complex thing.
You can try using a lot of JS code together with many Master pages, but you cannot do these thing completely dynamically (I mean you need at least the static masterpages to start from).
If I were in your shoes I would go for multiple forms and decide what to print in the printing program. You can create the interface just once and use many form layouts for this single interface. That is what I would do.
Regards Otto

Similar Messages

  • Can't print a graph on the whole page in landscape

    Hello!
    I have XY graph that I want to print on the whole page in landscape orientation (paper A4).
    On the screen the graph is small, so I do resizing, appending image to report, and then printing.
    After sending it to the printer I get preview (from the printer software) and see that the graph uses only approx. 5/6 of the page in the width, in other words the height of the graph takes the whole height of the page (21 cm) and the width of the graph leaves 5 cm of the page unused.
    I tried to change the width and the height of the plot area to get proper ratio, but in vain.
    If I set the height of the graph too large it goes beyond the page, but whatever I write to the width I always get 5 cm of the page unused on the right side. (not including 1 cm of the margin).
    Note: surely, if you set small width you can get more space of the page unused, I'm talking about increasing the width of the graph.
    Any ideas?
    See attached for the vi. I tried to save it for 7.1 version but it can't, so you'll need LabView 8.0 to check it.
    Also in attached you can find the page preview I get before it goes to printer.
    Thanks in advance.
    Rashid.
    Using LV 8.0 Pro on WinXP with printer Canon PIXMA iP1000 (also tested on HP printer, but I think it doesn't matter).Message Edited by Rashid on 06-06-2006 07:09 AM
    Attachments:
    Graph printing out.vi ‏40 KB
    Report preview.png ‏48 KB

    Rashid,
    It could be that you would need to install the entire LabVIEW 8.0.1 update rather than just the updated Run-Time Engine (RTE).  Here is a link to the 8.0.1 update.  If you download and install this version, you can then use the utility to mass compile or compile when you are prompted. 
    Repost if you have more questions!
    Andy F.
    National Instruments

  • Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?

    Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?
    Apple usually does this for OSX and its great when compared to windows where it doesnt use up all the real estate for viewing applications like websites and pdf files but when it comes to iBooks, it feels like there is no apple touch to it and is limited.
    If steve jobs were still alive, i bet there wouldnt be this problem >.>
    Please consider this as a real problem for people out there who would like to see 2 pages in landscape mode with pdf files and not just epub files.
    Thanks!

    Penguin, do you always insult people on here or was I just a special case?
    If you read the statement carefully, which you obviously did not! I was speculating, and I did not say anything for certain about knowing or not knowing ...
    I'm happy for the reply to the post and helpful link you posted to where I can leave some feedback for my post on an Apple monitored site but i rather you not reply if your gonna leave a snyde remark with every helpful comment.
    Don't do it again. and Thanks for the help.

  • How to have a page in landscape and the next in portrait

    i am unable to figure out how to have in a single document a page in landscape and the next one in portrait.
    can someone advise on how to do it? or maybe this option is not available in pages08.
    at least i have to be able to insert a chart in lanscape even if the document is in portrait and i am unable to do it as well

    hadial,
    To fill in the blanks: start your document in portrait mode; on page 2 select all the elements, then click on the Metrics inspector. Use the rotation wheel to rotate this elements 90 degrees.
    -Dennis

  • Created a ePub with PDFMate and was successful, but cannot view 2 pages in landscape :( Is there way to convert/ fix this in iBook?

    I downloaded 2 magazine pdfs and wanted to convert them ePubs,but couldn't find ANYTHING that works. Then found PDFMate and it converts, but when I put them on my iPhone 4, I cannot view 2 pages in landscape. Anyone know how to fix this? Or a working converter?

    Does PDFMate have a support website or email?

  • After IOS 5 upgrade my contacts can't be edited and whenever i choose group it blanks. Also my camera sometimes hang and wrong orientation landscape and potrait. Iphone 3GS

    After IOS 5 upgrade my contacts can't be edited and whenever i choose group it blanks. Also my camera sometimes hang and wrong orientation landscape and potrait. Iphone 3GS

    Try resetting it: hold the on/off and home buttons until you see the Apple logo (ignoring the off slider that appears first), and release.  If that doesn't work, connect to iTunes, go to the Summary tab and Restore.

  • Printer model hp laser jet p3005dn always prints second page in landscape format.

    Printer prints even page in landscape format only.  Even if in program (say msword) the page is in portrait format.

    Hi,
    The instructions (from your link) say you have to connect USB, how do you connect it now ? HP does not supply driver but Windows 8 & 8.1 MAY have generic/basic driver for it. The link also says you have to use Windows update. Amazing to see a 15-20years old printer is  still up and running, only the Operating system kills it.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PDF pages in landscape format like a book?

    I want my PDF file to be in landscape format. I don't mean that each page is landscape but the stacking of pages goes from left to right not top to bottom. I don't see an option for this. I would like to know how to do this two ways:
    1. When I create a PDF out of WORD documents.
    2. When I merge several PDF files into one Binder.
    I'm new to pdf's
    Hope this makes sense.
    Thanks so much!

    What you want is set up in the Print menu. when print window opens click on copies and pages and scroll down to two sided printing.
    Choose book setting. Tablet setting show image of a table with spiral ring at top.

  • Conversion of sap spool to pdf page in landscape mode.

    Hi All,
    I have a requirement where I need to print the output from a spool request in SAP to a pdf page .
    The page has to be in landscape format.  Is it possible to create a pdf page which is always in landscape format?
    I am using FM convert abapspool 2pdf for conversion of spool to pdf.
    Does this require any setting from BASIS end?
    Any ideas/thoughts are welcome..
    Thanks -
    Harmeet Singh.

    hi,
    plz check the exporting or importing options of FM so that u can change the page format in the PDF.
    please reward me if useful.
    gupta

  • Smartforms : first page in landscape, others in portrait

    Hi experts,
    I have a problem with a Smartform printing. The first page is in landscape, as i have configured, but the others ones are in portrait.
    I don't understand why. I have only one page in my Smartforms and i have put Landscape orientation.
    Thanks

    hi all,
    I guess we can put this setting at the spool level by passing some attribute in the FM which is used to invoke Smartforms.
    there will be a field for orientation which will help us in the same.
    please let me know in case you dont find that.

  • Way to have comic book display two pages in landscape and one in portrait?

    I'm trying to use iBooks Author to build a very simple manga-style graphic novel.  It's based on a print book (with a lot of unconventional frame use), so I'm not using any fancy interactive features or individual-frame zoom-ins or such.
    What I want to do is very simple and seems obvious:  In landscape, I want two images (one for each page) to display side by side.  In portrait, I want a single image to fill the whole display.
    Preferably the portrait view will also display one image/page at a time and require page turns, like landscape, rather than a continuous vertical strip of images.
    I assume I'm overlooking something really obvious, but I can't seem to figure out how to get this to work in portrait, and searching, or even buying a graphic novel template from a professional studio (they just disabled portrait), hasn't helped.  I can set up landscape well enough, but if I check the option to share images with portrait, I just get little inline thumbnails in the continuous-scroll-style vertical view, when what I want is large, single-page images.  (Perhaps what I'm really asking is how to disable the infinite scrolling mode in portrait view?)
    I'm sure the answer to this will be something simple that makes me feel like an idiot, but I would tremendously appreciate any help.

    Thanks for the suggestion, K T.
    I'd already read through several of those tips lists, and I was aware that the page turn animation was exclusive to epub documents.  I was assuming there would be some way to display a full-screen image in portrait view with an .ibooks file, but perhaps that's not currently the case (which, admittedly, seems like a huge oversight on devices with less-than-10" screens).
    I could accept a continuously-scrolling portrait mode if that's a requirement, but I'd at least need to expand the page-images to fill the column, which is where I also wasn't having any luck with.  It seems like doing a new section for each page might be a sort of hack, to get around this as well, although it might preclude re-using the images in portrait view.
    (I probably also should have mentioned that I realize I could build this as an .epub or PDF book and get it to do more or less what I want, but there would be annoying faux-gutter and borders that I'd prefer to avoid, and iBooks Author otherwise seems to be capable of producing exactly the material I'm looking for with a lot less work than hand-coding an ePub file.)

  • How do you change the message page from landscape to portrait

    Hi, My message page is stuck in landscape, how do I change it back to portrait. Thanks

    Try double clicking the Home button to bring up the Multitasking toolbar. Press and hold an app and hit the little red circle with the minus sign to close out the Messages app.
    Open it up and you should be good.

  • Landscape and Potrait Conditionally

    There is a part of my report which is in landscape format which is to be displayed conditionally . The issue i am facing is , if the condition is not satisfied i am getting a blank page .
    Can we change the width of the page dynamically

    Hi
    I think you could do this but you might run into problems laying out the report content based on the page size.
    Whats you current conditional logic and template layout?
    Regards
    Tim

  • How do you print multiple photos per page in LANDSCAPE using iPhoto ?

    I am very experienced using iPhoto and like it but it has a very limited print program that I find frustrating.
    The simple task of turning the paper to landscape mode does not appear to be one of the options when you wish to print more than one photo per page.
    Even with a single photo selected there is no "landscape" mode, but rather you have to define the print dimensionally to be 11" wide x 8" tall.
    Even that option however, goes away when you select the "custom picture arrangement" to get more than one picture per page.
    Has anyone figured this out - I love apples products but this omission is a pain - HELP

    First send a feature request to Apple via http://www.apple.com/feedback/. 
    A workaround, if you have the iWork suite of apps, is to create a landscape canvas in Pages or any image editor that supports layers, drag the two photos onto it, resize as needed and print.
    OT

  • View some pages in Landscape and the remaining ones in Portrait

    We saved our website (http://www.turklingua.com) which presents Turkish translation services we provide worldwide, in PDF format.
    Is there any way to view some of the pages in this PDF file in Landscape and the remaining pages in Portrait?
    Many thanks in advance for your kind help us on this matter.

    Hello Pat,
    Many thanks for your prompt reply.
    We saved our website (http://www.turklingua.com) as a file on our hard drive as a PDF file. And we would like to see some pages in Portrait and some in Landscape.
    Hope this clarifies.

Maybe you are looking for

  • Screen keeps jumping up and down but only when using firefox-so not a hardware problem

    The screen keeps jumping randomly up and down but nothing is being touched or pressed. The screens can be email, you tube, bank or general internet screens, or even trying to create this page

  • Need Advice: Which Camera 4 Capturing HDTV & Flipping Monitor Horizontally

    I have CS4 Premiere and need to buy an HDTV camera and have questions how to achieve the following: 1) Capture hours of continous video direct to PC hard drive without stopping. 2) Display in real time a monitor image with the video flipped horizonta

  • Help in select plx

    hi Abapers, I need to improve performance in this select. H I H S G  <- I H S G   SELECT        * FROM  ihsg INTO TABLE hihsg     FOR ALL ENTRIES IN ht357g        WHERE ( objnr  LIKE 'OR%'           )        AND   ( k_skip EQ  imprm_k_skip-yes )     

  • Customizing Blog Templates

    Hi! I need to customize a blog template, to keep branding cosistent with my client's website. The one I'm looking at LifeType, with smartie templates, is too complicated for me. I just don't get it... Has anyone found an easier way to customize blog

  • Writting GIF images

    I'm trying to make a program that converts images from one format to another ( BMP, GIF, JPG), and I got stuck at writting GIF's. I noticed that this essue appeared before. Any solutions? JAI doesn't seem to support writting GIF's (something about pa