Page background brightness not consistent using image fill

And I can't seem to figure out how to adjust it. Can anybody help? I've tried copying from the page itself, adjusting the brightness to match and re-importing to iweb, but that doesn't work either.

Thanks old toad! It's www.jeffreyjanger.com You'll see that the background on the home page is lighter than the background on all the other pages (which are consistent). I'd like them all to have the same brightness of the home page.
While we're at it, there's also something funky going on when the theme and background first load. I know my ISP is very fast and I can't imagine that they're such big files that they don't load faster.
Jeff

Similar Messages

  • Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. Any help?

    Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks

    I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
    I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps!

  • Home page background photo not displaying after changing out the image

    I decided to edit the photo that was my background image for my desktop home page. Now it doesn't load when I access the site from my mobile or iPad even though it is there and displays fine from my desktop.
    I have a mobile version of my site with a link to the desktop version included in my navigation menu. I don't have a tablet version of my site.
    Any ideas what might be causing this? I'm stumped.

    Hey, Thanks Brad. It doesn't seem to be timing out (i.e there is no "processing" indicator in the browser the way it looks if something is trying to load). It gets all settled in and just never brings up the photo. It's a little reluctant to do so on the desktop, but after a half a second it goes ahead and puts it on there.
    Additionally, not sure if this is related,... but the text I have on the home page jumps about and is not a mirror image of what I see on the Muse design side. I had to put the text boxes on top of each other to get them to into place when I publish to desktop. They kept trying to go on top of the plane for some reason even though I had them placed just so on the design side. But this started happening before I replaced the image so maybe it's unrelated. Idk
    One thing, I wonder: I thought Muse did it automatically, but do I maybe need to optimize the photo for web? Outside of that, the only other thing I can think of to do is to delete the current home page and start fresh. But I'm afraid to do that. I don't know how to do that.
    Thanks so much for your help. I will PM a link fyi.

  • How to show active page in Spry Menu Bar using images

    Hi,
    I have already read this answer "how to show active page in spry menu bar" but I am using images, not text.  I have mouse-over and mouse-out working in the Spry Menu Bar using image.png and image-over.png, but I cant' figure out how to get the image-over.png to appear on the active page since the spry menu bar is locked on the individual pages.  (I tried to put it in an editable comment, but spry wouldn't go for it. :-)
    Any ideas.  Here is the code:
    <ul id="MenuBar1" class="MenuBarHorizontal">
           <li><a href="../index.html" id="home" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','../images/all_pages/home-over.png',1 )"><img src="../images/all_pages/home.png" alt="Home Page" name="home" width="58" height="20" border="0" id="Image8" /></a></li>
           <li><a href="../show.html" id="show" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('show','','../images/all_pages/show-over.png',1)"><img src="../images/all_pages/show.png" alt="The Show" name="show" width="101" height="20" border="0" id="show" /></a></li>
            <li><a href="../team.html" id="team" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('team','','../images/all_pages/team-over.png',1)"><img src="../images/all_pages/team.png" alt="The Team" name="team" width="97" height="20" border="0" id="team" /></a></li>
            <li><a href="../company.html" id="company" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('company','','../images/all_pages/company-over.png',1)"><img src="../images/all_pages/company.png" alt="The Company" name="company" width="139" height="25" border="0" id="company" /></a></li>
            <li><a href="../beatles-tickets.html" id="tickets" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('tickets','','../images/all_pages/tickets-over.png',1)"><img src="../images/all_pages/tickets.png" alt="Tickets" name="tickets" width="75" height="20" border="0" id="tickets" /></a></li>
            <li><a href="../media.html" id="media" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('media','','../images/all_pages/media-over.png',1)"><img src="../images/all_pages/media.png" alt="Media" name="media" width="61" height="20" border="0" id="media" /></a></li>
            <li><a href="../news-reviews.html" id="news" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('news_reviews','','../images/all_pages/news_reviews-over.png',1 )"><img src="../images/all_pages/news_reviews.png" alt="News-Reviews" name="news_reviews" width="149" height="20" border="0" id="news_reviews" /></a></li>
            <li class="MenuBarHorizontal"><a href="../contact.html" id="contact" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../images/all_pages/contact-over.png',1)"><img src="../images/all_pages/contact.png" alt="Contact Us" name="contact" width="79" height="20" border="0" id="contact" /></a></li>
         </ul>
    Thanks so much for helping!
    Cheers,
    Janell

    Just found this page:
    Persistent Page Indicator
    Update: Drat, it is for text menus only not using images. :-(
    Cheers,
    Susan

  • I can not click certain tabs on my Etsy page & they will not open using Firefox, but I am able to open these tabs on Etsy when using Internet Explorer

    When I am signed onto Etsy, there are certain tabs on the top of the page that I can not click open when using firefox, but when I use Internet Explorer, I am able to click open these tabs. The following tabs on my etsy page will not open: Your Shop, Your Account, Help, & Sign Out
    Other tabs on the same page will let me click them open, such as:
    Buy, Sell, Community, Blog, Mobile, when using Firefox & Internet Explorer

    Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Pages background objects - not selectable

    Hi,
    I recently updates Pages and opened a document that I was previously working on (in the older version). I used to make background objects selectable in the inspector, the inspector has since changed and I cannot click on a textbox that I placed in the background. Therefore I cannot amend the text in the box nor move the box, I can't even highlight it. I have searched online and tried the "Make master objects selectable" and I still cannot do anything to it.
    Any suggestions welcome.
    Many thanks.
    Lu

    Kiko,
    That control is now in the Arrange menu, Section Masters.
    Jerry

  • Iphoto does not consistently use filename as title

    I am importing photos from a Finder folder into iphoto (09). For some photos, the program automatically uses the file name as title; for other photos it does not assign any title. I can't make out any pattern. Since I gave the files names that have meaning, it would be very helpful if I could see them in iphoto. (If I look at the Extended Photo Info, the file name can be seen, but it does not show up in the regular view as titles.) Can anyone help? Thanks!

    Have you looked at the files with other programs, for example Preview?
    If you show the Inspector in Preview (Tools > Show Inspector) and open the IPTC and Exif tab, you can see the metadata tags of the photos. Do the image files in question have different IPTC or Exif tags set? Some cameras write empty captions to the photos, that might be read by iPhoto as empty titles.

  • Page load is not happening using controller class on jspx page on 11g

    Hi
    <pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
    version="11.1.1.55.36" id="budgetAccountPageDef"
    Package="pages.documents" ControllerClass="#{BudgetReport}">
    It is throwing illegal access exception , sometimes onload is not called and no exception. sometimes it works too. This begaves strangely

    Controller class should not be given like that...According to [url http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/adf_lifecycle.htm#CHDBDCDF]the documentation, you can indeed use EL to specify the ControllerClass.
    It is throwing illegal access exception , sometimes onload is not called and no exception. sometimes it works too. This begaves strangelyTake a step back and read your post again - do you think anyone would be able to help you, given the level of information you've provided? If it works sometimes, then apparently you have specified it properly. What is the stack trace for the illegal access exception? What are you doing in your controller class (assuming the exception is thrown from your class).
    John

  • IWork '09's template chooser shows black text on a black background. Not very useful, how to change?

    Hi -
    For some time now, the template chooser that I see in any iWork application shows the name of the file as black text on a black background.
    This can't be normal, right?
    I'm looking for a way to change this into something with more contrast (black on grey/black on white, for example).
    How?
    I tried trashing preferences from my user account, the issue persisted.
    I'm about to try under a new user and I'll report back.
    Kind regards,
    Edd Turner

    Good that you try things out. If it doesn't help you might need to reinstall iWork and do the updates again.
    Use Yvan's script to uninstall iWork fully.
              •          Go to http://www.box.com/s/00qnssoyeq2xvc22ra4k
              •          Choose public_YK > for_iWork'09 > other_iWork'09 items
              •          Click on uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button

  • Trying to make an image fill from other template my page background

    I want to make the green box in the below picture the page background (and not manually by dragging the box as big as the window). Is that possible? Can I somehow get the image file for it?
    http://yfrog.com/40picture1bxp

    One reason would be if you had begun with a Page Layout template rather than a Word Processing template. The option isn't available in Page Layout because of the lack of a Text Layer in that mode.
    Jerry

  • Change Browser Background Color with Image Fill

    I inserted a picture using 'Image Fill' and 'Original Size' under Browser Background in the Page Layout tab and the browser background, I assume, defaults to white.
    I need the browser background to be a standard black color with an Image Fill. I searched around the iWeb preferences and tabs but found no option...
    Many thanks in advance!
    Alex

    The only way to get a black browser background is to set it to black. If you tile the photo there will be not browser background or make the image large enough so that it would take a very large browser window to exceed the photo's size. Or create a very large canvas with the photo in it at its original size and the rest of the area black.
    OT

  • Image file used for "Image Fill"

    Hi,
    In the "Road Trip" iWeb template there is a wood background.
    I want to create a square shape and use "image fill" to make
    it look like wood. Where do I find the image they are using
    for this fill?
    , Jonathan
    Power mac G5   Mac OS X (10.4.6)  

    Control-Click on the IWeb application to Show Package Contents. Then go to Contents/Resources/Shared. In that folder, again Control-Click and Show Package Contents for any of the Road Trip webtemplate packages. That's where you'll find background.jpg.
    [ Visit here for iWeb Tips, Tricks and Hacks ]

  • Image Fill for Menu

    I would like to know if there is any way to fill a menu widget (in active state) with an image instead of a colour / gradient.
    This is really (like most things in Muse) far more complicated than it should be, if it does exist at all. I've tried filling the inside part where the text is, but it only shows the image in a small area and it does not look as intended.
    If anyone knows how to do this, please advise. Thank you.

    BobInIndy1 wrote:
    Here is some clarification...
    question 1) How do you get an iPhoto image to be an inspector, graphic, fill, image fill? You cannot drag and drop (from media or iphoto) and you cannot use the choose button in inspector, graphic, fill, image fill to find it in the iphoto folder (it will not let you access it). So how? By dumby photo I meant any you CAN access via choose button (cannot be in iphoto)
    Please don't make up words, they don't help explain the problem.
    I do not know why you are using Image fill when it appears you want to use the shape as a mask.
    If you must use the image fill you can drag the image from the *Media Chooser* to the square in the Inspector and have 5 options to how that fits or scales in the Inspector.
    Question 2) What is layout mode vs word processing mode? How do you switch back and forth?
    When you started the document you were offered a list of templates divided into *Word Processing* and Layout. You chose one or the other. That sticks, you can't change it after.
    *Word Processing mode* has a fixed main body of text set between your margins. When text overflows a page it forms a new page after. WP mode also allows T.O.C., bookmarks, footnotes, outline view, full page view, background objects, master objects, sections and some other features.
    *Layout mode* is more freeform. You need to individually place images and text boxes and every page stands on its own. I consider it the poor cousin of the 2 but it does get rid of some of the clutter of WP mode.
    I think Pages use of the 2 modes is a very bad design decision.
    Question 3) Image fill and object placement in background are two completely different things (two different tabs in inspector). I am talking about image fill only. Image fill has no mask and you cannot drag around the image like you can in a mask.
    Yes and that is why you want to chose the one that does what you want. You will only want to use image fill if you also want to have text in the same shape.
    Peter

  • Page background, half disappeared?

    Hi gang,
    This occurs fairly regularly.  I've got a page background (a gradient).  The site is loading fine.  And then, when I sometimes do adjustments to a page ... the page background is not the FULL page, but only a portion of the page.
    I go back to the iWeb project and redo the page, alter it enough so that I can reload it as a changed page ... and sometimes it gets rid of the partial page, and sometimes it doesn't ... the partial page is still there.
    If I do the page over and over again, eventually I get the full page background.
    I'm wondering what might be happening here.
    All ears, Ben

    Where are you losing the page, online or in iWeb?  If on line try emptying your browser's cache (Command+Option+E for Safari) and reload the page.
    OT

  • What's the best way to save an 8.5 x 11 image for use as a page background in a PDF?

    What's the best way to save an 8.5 x 11 image for use as a page background in a PDF? My goal is to have a relatively small final .pdf file size that includes numerous pages with full 8.5 x 11 images as backgrounds in the document. If I save at 8.5 x 11 and 72dpi (example), the image is not 8.5 x 11, and the quality is not good enough. I need help with size, dpi, and file format to save as before I place it in InDesign and then save as a .pdf.
    Thanks,
    Jim

    Do exactly what I said then.  Create the InDesign document of the required dimension, and chose whether it will be high quality print, or Interactive PDF.  It really doesn't mater what format you bring the image into that document.  It can be JPG, PNG, but I usually use native Photoshop PSD.  The image does have to be of high enough resolution, but it can be many times bigger than iis required for the final export.  (InDesign does not import the image, but rather references it on your hard drive.)
    When you have placed your text and finished your page, then export it to PDF, but go through the tabs chosing suitable settings.  If the image needs to be downsized, InDesign will do that at this stage while building the PDF.
    If you can tell us how this presentation will be made (Projector, overhead projector, printed page etc. or just emailed to the end users) we can help you more with the final output settings. 

Maybe you are looking for