Page blanking while loading

I have a web page with an activex control on it. While the applet loads, the page blanks several times before the applet is completely loaded. Is there any way to load the page and have it stay on constantly while the applet loads?

The text and links on the page all show up properly,
then the whole page becomes white. After a short
time, prob less than half a second, the text shows up
again. It all turns white one more time before the
applet and everything shows up properly. It is
possible it's not exactly a Java issue. I've not had
alot of experience with this, but do know the
majority of the code for the applet and page is Java.The majority of the code for the page is probably HTML, I haven't seen an applet-embedding page to act like that, and after all, it goes blank way before the Java code is actually executed...
Could it be possible that it's the browser's reaction to the ActiveX?

Similar Messages

WebDynpro ESS content pages with ECC6 backend blank while loading (hanging)

Hello all.
I am implementing ESS on a newly installed NetWeaver 2004s SP10 Java Server with portal and existing ERP2005 / ECC6 backend.
Whenever it comes to the concrete pages, e.g. own address or WhoIsWho, the pages remain blank while loading. The "progress bar" in the Browser status frame moves forward a bit and then seems to hang.
I know this issue was asked in some other threads but I couldn't find the concrete ansewer to my situation.
My steps:
1) Deployment: XSS (PCUI_GP) 07, ESS 07, ESS BP 07, all last SP
2) Portal systems as mentioned in ESS docu: I configured all system parameters but the connection tests fail for the J2EE and the "R/3" system, is that a problem?
3) JCO definition: all tests successfull, even SSO.
4) ECC6: demo users linked to employees, given the neccessary(?) permissions (mainly ESS role profiles and S_Service authorization as I found that in another thread)
5) Portal / PCD permissions for the ESS user: on the ESS root folder, on the systems and even on the "Content prov. by SAP" folder, where I don't want them...
What I missed regarding some other posts:
I did not configure the portal content in the IMG of the backend under Personal Management->ESS. Do I have to?
There are some Service Keys predefined but not all like in the ESS docu, e.g. the one for WHOSWHO is not there like spelled in the docu. Do I have to define it?
If so, what are the correct keys and parametets, since I can't find it in the ESS docu.
Please can someone give me a complete example for one application function with the Service Key and all service parameters like path, object, pcd url?
On top of each application section in the ESS docu is a technical description. Are these the entries for service definition? But not all fields are matching, an example which data belongs to which field in the service definition would be helpfull.
Or did I miss something else?
Where are the log files located to find additional info (I'm relatively new...)
Thanks in advance
Carsten

Thanks for the tool, Darren. I may try it in future.
I solved it:
After setting up some general permissions of the Portal-Content folders in reference to a Portal post-install guide, the "Everyone" default group was missing on the ESS content folder because the permissions were not inherited any more.
I added "ESS role" permissions before but not "Everyone" group. I guess "Everyone" is needed for some general content included in the iviews. After adding "Everyone" with eu-role to ESS content folder (and srvcfg) it worked.
Regards,
Carsten

Page stuck while load and leads to stuck thread

Hi
I am facing an issue from a long time.
When i run the page of my application, when it opens for first time it get stuck and get loading and take very much time and after that it leads to stuck thread issue. All the component of my page opens but there is a table which gets value from OIM APIs also loads for the fiirst time. As in coding i have done it will pass null value to the table and wont fetch data for the first time. it will only fetch when value will be passed in a text box and submit was hit.
So my page gets hanged or loading in the table section everytime when it loads. for that i have to login in weblogic server, run the workmanager, forcefully shut down the server instance and run the page again. But sometime that doesnt work too.
Please help its a bug trouble for me and creating a huge problem.
Thanks
Sudeep

I'm not sure I understand your issue - but if you want to delay the fetching of information into the table until you actually have a value to pass to it see:
http://blogs.oracle.com/shay/2010/08/delay_method_execution_when_us.html

Firefox hangs while loading pages.

When loading a new page (not always in a new tab, not always an additional tab or tabs, but it seems to happen more when opening multiple tabs) the little rotating circle will either remain dark and if an attempt is made to reload the location bar changes to new tab, losing the address in the location bar, or the rotating circle will go one way, then reverse, then continue to spin. At the bottom of the page where what is being loaded in a page shows it will hit on one thing (as I'm writing this in Chrome I'm loading a folder of bookmarks I've been loading daily for years that now is a nightmare and pages are stuck at "connected to ajax.googleapis.com," "connected to hell.myfonts.net," "waiting for dt.adsafeproteted.com," "connected to log.pinterest.com," "connected to cdn.syndication.twimg.com," "waiting for api.lanistaads.com," "waiting for www.projectwonderful.com," "transferring data from v4.moatads.com," "waiting for aax.amazon-adsystem.com," "connected to aax.amazon-adsystem.com," and the other three pages are stuck trying resolve the actual URL) and then refuse to go any further. After that the page will sit, unchanging, as best as I can tell forever. I've left a page loading for several hours while working and it was still connecting to googleanalytics when I came back. It does the same in safe mode. Not a single page in the book marked folder is loading, NOT ONE. They're all sitting and spinning either with blank pages or partially loaded. I will reiterate before someone suggests I not load so many pages at once that I've been loading this particular folder full of pages for at least five years and probably longer and it did not do this until the last month.
This has been going on for a while and has made Firefox worthless. It is getting worse. I have read every similar question and none of the answers has made a bit of difference.
I have tried safe mode.
I have refreshed Firefox.
I have uninstalled Firefox and installed the latest version.
I have cleaned my registry.
I have cleaned my cache (which was almost empty anyway).
I have deleted all temporary files that were not in use on my computer.
I have deleted the install folder in Programs(x86) and then reinstalled the latest version (this made everything even worse and resulted in no secured connections being available at all, including mozilla.org giving me not safe connection warnings so now Firefox is even less useful than before) and currently have no add-ons or themes installed.
I have run Spybot, Malwarebytes, Housecall, and several rootkit detectors with no luck.
This computer is less than a year old, is running Windows 8.1 and is up to date. I just installed Firefox v 37.0. When I went to look and see what the version was Firefox can't even seem to resolve its own update URL.
Application Basics
Name: Firefox
Version: 37.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
Report ID: bp-c4fb0dcb-300b-499f-9604-ff2202150402
Submitted: 1 day ago
All Crash Reports
Extensions
Graphics
Adapter Description: Intel(R) HD Graphics
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0156
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 9-16-2013
Driver Version: 10.18.10.3308
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 00000000
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D11 vs_5_0 ps_5_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d 1.1
AzureContentBackend: direct2d 1.1
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150326190726
browser.startup.homepage: http://forecast.weather.gov/MapClick.php?lat=38.24457956399675&lon=-85.76285815797684&site=all&smap=1#.VR8Tv-H0d-8
browser.startup.homepage_override.buildID: 20150326190726
browser.startup.homepage_override.mstone: 37.0
browser.tabs.warnOnOpen: false
dom.mozApps.used: true
extensions.lastAppVersion: 37.0
gfx.direct2d.disabled: true
gfx.direct3d.last_used_feature_level_idx: 0
layers.acceleration.disabled: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1428101019
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1428101009
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.8
Version in use: 4.10.8
NSS
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSMIME
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSSL
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSUTIL
Expected minimum version: 3.17.4
Version in use: 3.17.4
Experimental Features
---------------------

I get an e-mail with go-comics and the ones I want to post links to I'll open in the browser as I read them in the e-mail so I regularly have a dozen tabs open (all the same site) by the time I'm through the e-mail. Every third or fourth page will hang up on something (connecting to or waiting for) sometimes not loading a single image, sometimes loading half the page, sometimes loading everything but the comic (because, hey, why put that as the first thing to load when you've got all these ads and crap to throw at your paying customers?).
At some point a couple of months ago I got some malware associated with trovisearch (I do not know how that got past security and java blocker but it did, probably some hidden crap in something from CNET) that somehow spoofed a page for Housecall and added five or six pieces of malware and adware. I cleaned for two days after and still can't find anything left on the computer even though I've been running scans constantly to try to make Firefox work right. I downloaded and ran a scan using Kaspersky during that time and then uninstalled it. That very well may be the cause of the post-refresh SSL issue.
I have Spybot and Malwarebytes scan logs from the time of the infection if that would help in any way. It doesn't look like there's a way to attach .xml files in this forum, though.
I can also run hijack this and copy and paste if that would help.
I'm currently running Windows Defender and rely on that and Noscript and adblocker plus to keep me isolated from most attacks (I don't have those add-ons re-installed yet). I also run Peerblock because they add malicious sites and known hacking sources (like Chinanet) to what they block as well as all the fake p2p stuff that's constantly pinging the computer. If I'm treading around in perilous waters I run Sandboxie.
Chrome is working as normal but Firefox feels like dial-up or worse right now and without adblocker I might as well be using IE.

CPU peaks 35-40% while loading page - very unresponsive

After upgrading to 10.0.2 my browser has become very unresponsive while loading pages/opening blank tabs.
I've already tried safe mode with all plugins deactivated and a full reinstall.
My plugins are up to date, I do not use custom themes and it doesn't matter what kind of page I'm loading. Seems like its the engine itself.
Running a Win7 x64 notebook - I did not have this issues before the latest update.

It would be worth experimenting with turning Hardware Acceleration on and off. If you have HA enabled but it is not working properly it is likely to cause problems. (If you are using FlashPlayer video that has its own controls for setting HA on or off). To turn HA off in ordinary browsing use
* Firefox Button -> Options -> | Advanced | -> | General | -> [] Use Hardware acceleration when available
** see [[Options window - Advanced panel]]
* you may also wish to see if the Graphics drivers will update
** see [[How do I upgrade my graphics drivers?]]
* you may also be interested in this article, including a test that you can run <br/>http://hacks.mozilla.org/2010/09/hardware-acceleration/
It is looking like some of the problems could relate more to the system, than to Firefox.

Safari: Pages begin to load and then go to blank gray screen?

Hi there. I am using Safari 6.1.1 on a late 2009 iMac. I've never had this problem before, and it's worth noting that Safari does not actually crash -- it remains responsive but the pages don't load properly. They begin to load and but it's as if, the instant the full page appears, it cuts to a blank gray screen. It doesn't happen with absolutely every site but it occurs with the majority I'm visiting. Obviously it makes Safari unusable so I'd appreciate any help that could be offered. Thanks.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

I've problem with Game Center . I can't sign in Game Center on my iPad . I tap on the Game Center icon but the page is blank. I tried go to setting, my Apple ID appear but the page keep on loading and nothing pop up. How to resolve this issue?

Hi, bamboo64.
Try closing all open applications in multitasking and power cycling the device. Once this is done test the results. If the issue persists, I have included a couple troubleshooting articles that I would recommend going through.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any su

At random times firefox loads an unrequested page. Sometimes it is the Google search page but more often it is a random page which sometimes loads or stays blank. I do not recognise them as sites from my directory. Otherwise Firefox works well. Any suggestion for a cure?
== This happened ==
A few times a week
== one month ago

Glad to see its working.
To help other users find solutions, click on the '''"Solved It"''' button Next to the Reply that BEST solved your Question
Please DO NOT click "Solved It" next to this reply

Some web pages start to load then just "blank out"

When I go to some of the www.foxnews.com articles/web pages, the pages starts to load, then blinks, and starts to load again then goes blank. I went to the Actions window on the top most menu bar and saw that this is the last thing loaded. So I am guessing that the last thing shown as being loaded is causing the page to go blank. Any ideas as to why this is happening? I have updated both flash and shockwave players to the newest version. All Apple software is up to date.
-Apple //GS
PS: here is an example of what is loaded when the page goes blank.
http://www.foxnews.com/projects/pointroll/index.html?pid=606048U3092008042516071 4&redir=http://ad.doubleclick.net/click%3Bh=v8/36c1/3/0/*/d%3B202199158%3B0-0%3B 0%3B26605397%3B2321-160/600%3B26315705/26333559/1%3B%3B~okv=%3Bcomp=%3Bptype=sto ry%3Bpageid=370066%3Bcol=%3Bkw=ahmadinejad%20israel%20dying%3Bs1=world%3Bs2=null %3Bpos=frame1%3Burl=story0_2933_355599_00%3Bfnc=ad%3Bsz=300x250%3Btile=2%3B~aopt=0/ff/ff/ff%3B~fdr=202256 043%3B0-0%3B1%3B22018499%3B4307-300/250%3B26360965/26378819/1%3B%3B~okv=%3Bcomp= %3Bptype=story%3Bpageid=370066%3Bcol=%3Bkw=ahmadinejad%20israel%20dying%3Bs1=wor ld%3Bs2=null%3Bpos=frame1%3Burl=story_0_2933_35559900%3Bfnc=ad%3Bsz=300x250%3Btile=2%3B~aopt=2/0/ff/0%3B~sscs=%3F$CTURL$&flash=9&se rver=portalserve&bu=289126824
AND here is what is should be:
http://www.foxnews.com/story/0,2933,355599,00.html
I got this shorter version by stopping the "reload" before it started.

Okay, a guess...
The page only contains some JavaScript.
I don't think the page is meant for people to view - here's the code from the page...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>FOXNews.com</title>
<script language="JavaScript">if(typeof(parent.prInst)=='undefined'){var prInst=1}else{prInst=parent.prInst+1} for(i=0;i<parent.frames.length;i+){if(parent.frames.title=='prif'){prInst+}}this.title='prif';var prs="http://ads.PointRoll.com/PRServe/?pos=s&num="prInst+"&"location.search.substring(1)"&r="+Math.random();document.write('<scr''ipt language="JavaScript" src="'prs+'"></scr''ipt>');</script>
</head>
<body>
</body>
</html>
Tom

How to limit the number of TCP connections beeing used concurrently while a page is beeing loaded?

We manufacture industrial small-footprint control modules with embedded web server. The resources of these modules are very limited, especially in RAM. We have problem, that FF opens 15 parallel TCP connections while loading a web page (main html page first, then all icons simultaneously). We can not handle such behavior because of lack of RAM memory needed for TCP buffers.
Question is how to limit the number of concurrent TCP connections the browser will use? We need to do it somehow directly from the page, we can not push our customers to change the general settings of their browsers (they would not understand such things anyway).
Do anyone have any suggestion?

Sorry, one other thought. Many web designers now combine all icons into a single image and use CSS to clip the image so that only the desired portion is displayed. This minimizes the number of required connections and increases the probability that the image can be retrieved from cache.
More info:
* [http://www.w3schools.com/css/css_image_sprites.asp CSS Image Sprites - W3Schools]
* [http://www.alistapart.com/articles/sprites/ A List Apart: Articles: CSS Sprites: Image Slicing’s Kiss of Death]
* [http://coding.smashingmagazine.com/2009/04/27/the-mystery-of-css-sprites-techniques-tools-and-tutorials/ The Mystery Of CSS Sprites: Techniques, Tools And Tutorials | Smashing Coding]
No idea whether this is practical for your application.

My PURCHASED page doesn't load on my iOS6 devices while loading fine on iOS5 and iTune on PC.

My PURCHASED page doesn't load on my iOS6 devices while loading fine on iOS5 and iTune on PC.
Please help
In addition, my RESTORE of purchase for Inn App Purchase of "Art Sense" doesn't work on both iOS5 and iOS6.
So far, the developer said his app is working ok and can do nothing because he can do nothing. Apple won;t allow.
*** Apple staff from Asia and other places can't help me and can't identifiy the problem so far. ***
Such a shame.
I am not a novice in internet or iOS devices.
Have tried all elementary methods in my opinion, factory reset etc...all waste of time.
Apple system is deteriorating in every direction.

Which phone? What version of Firefox OS?

Php page won't load but will in while testing

I have created a php page that connects to a db. While in
dreamweaver I can test the page and see the db content but can't
view the contents of the page if I got to the page via the website
www.mysite.com/testpage.php.
I have uploaded the connection files and the test file with
dependent files but the page won't load. Also I noticed that using
virtual for the php command doesn't work so I use include <?php
instead.
Since I can see the db contents via testing the page but
can't when viewing the page via www.mysite.com/testpage.php.
Can someone help shead some light on this??
UPDATE..
I removed the following from the PHP file and I was able to
get the page to load...
So what doctype should I be using??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

cdembek wrote:
> but the page won't load. Also I noticed that using
virtual for the php command
> doesn't work so I use include <?php instead.
Dreamweaver uses virtual() if you have set your site
definition to use
site root relative links. Unfortunately, virtual() is
supported only by
Apache, so the fact that it doesn't work indicates that your
remote site
is probably on a Windows server.
When changing from virtual() to include(), you also need to
change the
link to your connection from a site root relative link to a
document
relative one.
virtual('/Connections/mycon.php');
needs to become something like
include('../Connections/mycon.php');
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

I'm getting error as adobe Illustrator crashes while loading the multiple pages PDF file. Please help me. Thanks in advance.

Hi,
I'm getting error as adobe Illustrator crashes while loading the multiple pages PDF file.
Please help me. Thanks in advance.

Hi Monika,
I have downloaded the script to load the multiple page of pdf file.
I tried loading the multiple page PDF file via File Menu -> Scripts -> Other Script...
After executing the script file -> Browse and enter the page number - > OK
The PDF file is looks like created from word document. There are total 120 pages in this file.
PDF file size is 20 MB.
I'm still searching for the solutions. Please help me.
Thanks,
Lavprasad

Newest update won't allow startup page to be blank, it loads to the last page Firefox was on, so how do I fix this?

Since the most recent update, every time I open Firefox, it loads to the last page I was on. I prefer a blank page to be loaded. I have this correctly marked in the options, and I've even uninstalled and reinstalled the program. Is there a fix for this?

browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 3
browser.display.background_color #C0C0C0
browser.display.use_system_colors true
browser.history_expire_days.mirror 7
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20150222232811
browser.startup.homepage_override.buildID 20150222232811
browser.startup.homepage_override.mstone 36.0
browser.tabs.warnOnClose false
browser.tabs.warnOnOpen false
dom.mozApps.used true
dom.w3c_touch_events.expose false
extensions.lastAppVersion 36.0
gfx.direct3d.checkDX10 false
gfx.direct3d.last_used_feature_level_idx 1
media.gmp-gmpopenh264.lastUpdate 1423173493
media.gmp-gmpopenh264.version 1.3
media.gmp-manager.lastCheck 1425137005
network.cookie.prefsMigrated true
places.database.lastMaintenance 1425054727
places.history.expiration.transient_current_max_pages 104858
places.history.expiration.transient_optimal_database_size 167772160
places.last_vacuum 1302790928
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true

Why does the Page moves up and down slightly while loading?

The page jumps (jerky) up and down while loading. The movement isn't great but is more than enough to lose your place while trying to read the part already loaded.'''bold text'''

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
You can also try to create a new profile.
* [[Use the Profile Manager to create and remove Firefox profiles]]
* '''[[Firefox no longer works with Windows 2000]]'''

Page blanking while loading

Similar Messages

Maybe you are looking for