Page cannot be found on windows server 2003

I have installed application server 10g on windows server 2003...
Now when i try to run the test form throught the option Run a form on the web i get a message Page cannot be found....
how can i resolve this issue

Al-Salamu Alikum We Rahmatu Allah We Barakatu...
Suhail , Pls mark it as solved to help others while searching for their problems to fix...
Regards,
Abdetu...

Similar Messages

Cannot Edit Group Policies - Windows Server 2003 R2

Hello, everyone.
I have a server running Windows Server 2003 R2 Standard Edition Service Pack 2 32-bit. Group policies were working fine until sometime last week. Now, whenever I would launch GPMC, I would get an error message that said "Windows cannot find gpedit.msc.
Make sure you typed the name correctly and try again.' Then, after I click OK, I would get another error message that said "Failed to start the group policy snap-in. The gpedit.msc file may be missing, files with the .msc extension may not be associated
with mmc.exe, or you may not have the appropriate rights."
I removed GPMC to see if that would work, but I still get the same error messages when I try to edit group policies through ADUC. I also tried de-registering and re-registering the gpedit .dll files but I did not have any luck.
Is there anything else I can try? I do not have any group policies that I need to deploy at the moment, but I would like to get this fixed as soon as possible.

> snap-in. The gpedit.msc file may be missing, files with the .msc
> extension may not be associated with mmc.exe, or you may not have the
> appropriate rights."
So you verified that gpedit.msc exists and that it can be launched
through "run"?
> de-registering and re-registering the gpedit .dll files but I did not
How did you do that exactly?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Cannot save files to Windows server 2003 file server from MAC

Hi,
We have few MAC users and others mostly windows based users. Problem now is MAC users cannot save any files to the file server. I had the issues to save in the portable hard drive then i format the HDD to fat 32 and now i can save, But the file server cannot
be done like that.
What i can do to save the files to file server? please advice me
thanks
saththiyan

I cannot attach another NAS as CEO need to save files to all the folders which is there in the file server already,
You can share the folder and map a drive across the network to access the shared folder on the file server. Shared folders formatted NTFS do not affect network access. You would do that by using the SMB. Here's how:
How to Map Network Drive in Mac OS X
http://www.technipages.com/how-to-map-network-drive-in-mac-os-x.html
What OS version is the server? Is it a DC? You may need to reduce security on the server to allow Macs to access the server. Here's more info:
How to Disable SMB 2.0 on Windows Vista/2008/2008 R2
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
"To disable SMB ... Otherwise, disable SMB signing on Windows Server 2003 domain controllers.
http://support.microsoft.com/kb/325379
How to enable Windows 98/ME/NT and MAC clients to logon to Windows 2003 based Domains
http://support.microsoft.com/default.aspx/kb/555038
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

After MS13-098 and SecurityAdvisory(2915720), Windows Server 2003 Remote Desktop(TermService) cannot start service

I have trouble with Windows Server 2003 R2 Standard. I installed the KB2893294(MS13-098) patch, and I changed the registry that is suggested actions of Security Advisory(2915720) http://technet.microsoft.com/en-us/security/advisory/2915720
Suggested Actions:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Cryptography\Wintrust\Config]
"EnableCertPaddingCheck"="1"
After rebooting the event viewer(system) says:
Event Type: Error
Event Source: TermService
Event Category: None
Event ID: 1014
User: N/A
Description:
Cannot load illegal module: C:\Windows\system32\rdpwsx.DLL
After I cannot use Remote Desktop Connection from other client.
So I check the all security patches and other hotfixies. I checked the KB2653956 and KB958476.
But TermService do not recover the error.
And then, I delete the "EnableCertPaddingCheck" registry and reboot systems.
TermService have no error. I can use Remote Desktop Connection from other client.
After KB2893294 installed, Remote Desktop Connection cannot use from other client that "EnableCertPaddingCheck" registry set to "1".
Other Windows Server 2008 systems do not effect the KB2893294 patch. But All Windows Server 2003 systems cannot use the Remote Desktop Connections after the KB2893294 patch.

Update on this issue:
The debug team has accepted the issue and has identified it as a regression. Right now they're targeting *June* as the release date for a fix. I'm attempting to educate them that customers don't just install patches the day (or even month) they're
released and that the fix needs to be moved up in priority to give a minimum of 60 days to install the patch before the time-bomb explodes.
In the meantime, a workaround has been provided that will turn off the new functionality. Note that I have not yet had a chance to test this. It entails creating a new DWORD registry entry--UseLegacyPE--and setting it to 1.
HKLM\Software\Microsoft\Windows NT\CurrentVersion\ImageHlp\UseLegacyPE
I will update this thread when I have further information.

Cannot Install Portal 10g on Windows Server 2003

Downloaded Portal 10G from downloads server (as_windows_x86_portal_wireless_101200) to a new Windows 2003 Server. Attempt to install, get the series of messages "checking prerequisites" ending with "All installer requirements met."
At that point the DOS window disappears, and nothing else visible happens. The "checking prerequisites" messages are also written to a log file in
c:\program files\oracle\inventory\logs
which contains no other information after the message "All installer requirements met."
However, in the server's event log I get two entries:
First...
Application Error:
Faulting application setup.exe, version 0.0.0.0,
faulting module unknown, version 0.0.0.0,
fault address 0x00000000.Followed by...
DrWatson:
The application, C:\Documents and Settings\All
Users\Documents\Downloads\
as_windows_x86_portal_wireless_101200\
Disk1\setup.exe, generated an application error
The error occurred on 03/23/2005 @ 13:09:23.531
The exception generated was c0000005 at address
0020224D (<nosymbols>)After I repeat these steps several times I still get the "Application Error" log entry, but the "DrWatson" error is replaced by a simpler message
Application Error:
Fault bucket 00134882.I noticed another recent entry in the forum that describes a similar problem -- I entered this one to insure that you had as much information as necessary to diagnose the problem. If there's any other information you would like please let me know.
Thanks in advance!

mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT)

Why the RSC can not found my JRE1.6.0.06 on windows server 2003 ?

I installed the SUN RSC program on my windows server 2003, It required JRE 1,3 or later,then I installed the JRE.16.0.06, I set the JAVA_HOME and CLASSPATH,I can got correct information with java -version commend on cmd,but the RSC still told me that it required JRE 1.3 or later.
Why ?

We run our Sun V480s and E250 (Solaris 10) headless, and depend on RSC (both CLI and GUI) to access the consoles from Windows.XP desktop machines.
We have been using the RSC GUI from the Wintel boxes quite successfully for several years, and appreciate having the RSC devices in our Sun servers. We rely on Sun's RSC software.
Several days ago we installed the current Sun JRE (1.6.0.06) on the Windows machines. RSC GUI now fails to run on the Windows machines, displaying a message box advising that Java 1.3, or later, is required and directing us to download 1.3 or later.
Since 1.6 is later than 1.3, it would appear that Sun's current JRE broke the existing Sun RSC GUI app.
How could Sun do this? WIll they release a fix?
We will try to open a Service Request, but are having difficulty due to Sun's problems implementing the new Support Contract arrangements, and it is not clear that we can access our support at this time. Sun has physically visited our facility, and given us absolute assurance that they will continue our existing contract for the duration of their difficulties, while simultaneously lapsing our contract when we attempt to access it online. Consequently, we cannot immediately get contractual assistance on this matter, through the normal support channel.
Thank you.
DG
Edited by: david_grove on Jun 4, 2008 5:53 PM

Problems displaying a utf-8 page on firefox on windows server 2003 however the same version of firefox is working fine on windows xp, is there any specific thing to check on windows server 2003?

firefox is having problem displaying utf-8 page on windows server 2003 however the same version of ff is working fine on windows xp, is there any configuration to check on windows 2003?

Can you post a link and attach screenshots to show the difference?

Forms cannot run at Windows Server 2003

Windows Server 2003
Forms 10.1.02
Database 10g 10.2.0.1 Production
every time i run the forms application but the firefox show it is crash...
also my Windows Server 2003 cannot run any java application...
need some advice from experts here
THANKS
dausnasir

The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
Just for the records:
Safari prefs in my Windows live happy in:
C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
So, it must be some stuff, some little tricky service or software I install in my usual Windows.
Anyway, thank you very much...
If someone have some clue, I'll apreciate

Event 29 and 24 that cannot receive the time source in windows server 2003

I have one server windows server 2003 R2 pop up the event log as below
Event 29
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently
accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.
Event 24
Time Provider NtpClient: No valid response has been received from domain controller server01.xxxxx.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize.
My domain controller server01 do not have any pop up event log for the time service.
I have found some information in Mircosoft TechNet would suggest such as restart the time service with command prompt. I have tried for it. But the event id keep on to pop up for each hour.
Should I configure for the time service can read for the hardware?
Moreover, if I still read the time from DC, any configuration can be done for my server and domain controller? Thanks!

Hi,
Thanks for your question.
Would you please tell us that if the DC holds a role of PDC emulator? If yes, you can run “DCdiag” on the DC to check if it is advertising itself as a Time server. In addition,
please make sure that no firewall is blocking UDP port 123 and you can also ping the DC on the client computer to verify that the client computer is capable of contacting the desired source.
In addition, please make sure that the value of the
AnnounceFlags in the registry below is 10:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
Please also make sure the value of
Type
in the registry below is set to NT5DS:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
More information:
Windows Time Service Tools and Settings
http://technet.microsoft.com/en-us/library/cc773263(v=ws.10).aspx#w2k3tr_times_tools_suxb
Best regards,
Susie

Mail cannot open hyperlink of file located in windows server 2003

My macbook air has access to shared directory located in a windows server 2003 machine via smb mount. However, when I get an email containing a hyperlink of a file located in the shared directory, mail cannot open the link. Any ideas?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

MSI TV Card doesn't work in Windows Server 2003 !!!

Hi All,
I have bought a MSI TV Tuner (TV @nywhere series)
I Installed it on Windows XP and it works properly.
But I Installed it on Windows Server 2003 and noticed that it's not working at all !
It's TV Tuner , however, doesn't work good (It has a weak receiving power). I'm using it as a Radio (MSI Radio). But even the Radio is not working under Windows Server 2003.
I want to know what's the problem ? What Driver should I use ?
I have Installed the same driver in Windows 2003, Because there isn't any Windows 2003-specific driver included in the CD-ROM of this package.
Please guide me what should I do. I need Windows Server 2003 to be my OS. I want to know if this TV Tuner isn't supposed to work on Windows 2003 Server ? It's only desingated for Windows XP and prior ? What's the solution ?

Quote from: sma_soft on 27-August-06, 14:34:43
Hi
what a pitty !
You are a known company and you DON'T KNOW !! if your hardward can work in Windows Server 2003 or not (:|
Or maybe you don't assume Windows Server 2003 as an Operating System !
Also I checked the TV Tuner Driver Pages in your site, but I found that you don't have ANY driver for Windows Server 2003
It's exactly the driver I have on MSI CD-ROM. As you can see above, it's telling There's no support for Win2003 !!!
Your System OS Win9X/ME/2000/XP(22710KB)
Now you see ? Even in the manufactory you haven't tested and it was not important for this comany if their hardware can or cannot work on Win2003.
Maybe you have designed it especially for Windows XP and prior.
I JUST WANT TO KNOW THIS !!!
bye
OT:
@sma_soft,
Hi sma_soft! As the title of this site says: "MSI HQ User to User Forum". As I understand, we are all the same here. That we are all MSI product users and customers in this forums.
Read the article below that I got from here for you to be able to understand what I meant. You will see this article on the upper portion of every page of this forum. Just scroll upward.
"News: For your information, the MSI Forum Team is not paid by MSI.
The entire forum is run by volunteers that like yourself, enjoy MSI's products.
This forum is independent and not regulated by MSI, but the MSI Forum Team will try to assist you with any problems you have with MSI products.
Just remember, there are no MSI employees present here!"

Which VMware support Windows 7 as Host and Windows Server 2003 as Guest OS

Folks,
Hello. I need to install PeopleSoft PIA in Windows Server 2003.
Because my laptop is preinstalled Windows 7 Home Premium Editon and cannot dual boot multiple Operating systems. I have to install VMware in Host Windows 7 and then install Windows Server 2003 as Guest OS for PIA.
I have installed VMware Server 2.0.2 into Host Windows 7 and Windows Server 2003 as Guest OS. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333/ui cannot display any more.
I have found that Windows 7 is not a supported Host Operating System for VMware Server 2 and strange thing might happen anytime. I found that "VMware Player 3" is fully supported Windows 7 as Host OS but is not supported Windows Server 2003 as Guest OS.
Does any folks know which VMware product support Windows 7 as Host OS and Windows Server 2003 as Guest OS ?
Many thanks in advance.

Hi,
Based on my research, I would like to suggest the following:
1.
Ensure the printer is compatible with Windows 7 and Windows Server 2003 and the drivers are up-to-date.
2.
Try the following method:
Printers that use ports that do not begin with COM, LPT,
or USB are not redirected in a remote desktop or a terminal services session
Hope this helps. Thanks.
Regards,
Nicholas Li - MSFT
That doesn't apply to Windows 7 Machines. I'm having the same problem as Acer_, I have a RDP Session from a Windows 7 Machine to a Windows XP machine and the local printer was available a few days ago but isn't anymore. The drivers are installed on both PC's
and are compatible with Windows 7.

Cold fusion 8 and Windows Server 2003 Administrator Login

I cannot seem to login to my coldfusion (trial version)
administrator login after installed successfully on my Windows
Server 2003 with Web Edition Service Pack 2.
It tries to go here which is correct
http://127.0.0.1/CFIDE/administrator/index.cfm
But I get
Bad Request (Invalid Hostname)
I attempted to go through IIS through default Web Sites and
browsed over to
http://192.168.10.19/CFIDE/administrator/index.cfm
and I now get a "The page cannot be found" display message.
Is there anything special I need to do, perhaps in Web
Service Extentions in IIS or something since I don't see
"Coldfusion" mentioned anywhere, and I can't seem to find any clear
instructions on the Adobe site.
Please help, thanks.

You should
configure
IIS for Coldfusion. Pay particular attention to the section "To
verify your IIS configuration".

Add-on installation problem in Windows Server 2003

Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto Ng

I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya

Page cannot be found on windows server 2003

Similar Messages

Maybe you are looking for