Page Display Question

Hi,
I'm new to Dreamweaver and I'm starting my first site. I created my first web page and it looks good when I first view it in my browser. My problem is that when I am still viewing the page in my browser and then open the bookmarks, only the right side of the web page is pushed off the screen. I would prefer that an equal amount on both the left and right sides are cut off instead of just the right side, but I don't know how to do this.
Thanks, any help would be greatly appreciated.

Sorry for the confusion, here's a more detailed description of what I'm aiming for. Also, I don't have any web pages published or a web host yet so I can't post a URL to my page.
This Adobe forums page acts just like my web page. On the right side of this Adobe page, there is a gray and white checkered design. If the bookmarks (or favorites) are closed (I am using Firefox with a bookmark toolbar on the left side), then the checkered design is pretty wide. If the bookmark toolbar is opened, then part of the checkered pattern is cut off from view, but the left side of the page is still completely in view.
Coca Cola's website is more of how I want my website to be: http://www.coca-cola.com/index.jsp
On both sides of Coca Cola's website, there is a gray-white gradient. If the bookmarks are closed, then the gradient pattern on both sides are exactly equal in width. If the bookmarks are opened, then part of the outside portion the the page is cut off on both the left and right sides quite a bit, but the gradient design widths on the left and right are both still equal in width.
So if the opened bookmarks are going to cut off part of the web page from view, I would prefer to have both parts of the left and right side removed instead of just the right side. I tried centering the page by following David Powers' thread, but either I didn't do it correctly or it didn't help with this problem.
I hope this was clearer.

Similar Messages

Bookmarks and web page display question

I have been used to using Netscape and Internet Explorer where you can have a vertical column of bookmarks running up and down on the left side...and then the window to the right will display the web page...i.e., you don't have to click on a separate bookmarks page, open your link, and then toggle back to the Bookmarks page.
I like the idea of having ALL of my many bookmarks available to me on the lefthand side while seeing the pages open in the window to the right.
Is there any way Safari can provide close to that same layout? I know about how to use tabs and I know of the bookmark horizontal bar, but I do miss the vertical on the left bookmarks column showing everything (several hundred) and just clicking and having the web page pop open on the right while keeping all my bookmarks available on the same screen.
Can Safari do this? Or what might be the closest workaround?
Thanks,
John

Sorry for the confusion, here's a more detailed description of what I'm aiming for. Also, I don't have any web pages published or a web host yet so I can't post a URL to my page.
This Adobe forums page acts just like my web page. On the right side of this Adobe page, there is a gray and white checkered design. If the bookmarks (or favorites) are closed (I am using Firefox with a bookmark toolbar on the left side), then the checkered design is pretty wide. If the bookmark toolbar is opened, then part of the checkered pattern is cut off from view, but the left side of the page is still completely in view.
Coca Cola's website is more of how I want my website to be: http://www.coca-cola.com/index.jsp
On both sides of Coca Cola's website, there is a gray-white gradient. If the bookmarks are closed, then the gradient pattern on both sides are exactly equal in width. If the bookmarks are opened, then part of the outside portion the the page is cut off on both the left and right sides quite a bit, but the gradient design widths on the left and right are both still equal in width.
So if the opened bookmarks are going to cut off part of the web page from view, I would prefer to have both parts of the left and right side removed instead of just the right side. I tried centering the page by following David Powers' thread, but either I didn't do it correctly or it didn't help with this problem.
I hope this was clearer.

One page displays incorrectly on my Mac

Hi, I have a 6 page site hosted on Mac.com. All pages display correctly on various devices but on the Mac I used to create it, one page displays as plain text (in Safari) in Firefox it is fine. I suspect the file may be being read from a cache somewhere on my Mac but cannot find where. Have tried resetting Safari and emptying cache etc. Tried deleting the page and publishing and it doesn't appear but when I paste the page back into iweb and publish again the fault is still there. Just odd why it works on all other Macs using same OS and Safari, but not on the machine that created it. Does anyone have any ideas? Thanks.

To answer my own question - in case it helps anyone else. Just tried duplicating the offending page and renaming and relinking and it seems to work. Not sure why exactly but it now seems OK.

Page display based on count of records

Hi All,
i have one report requirement in BIP.
my report should contains 3 pages only.
Fist page contains first contact information.
Second page should contain Second contact inforamtion.
Third page should contain comparing of first contact age and second contact age.
if we select first contact record it should display first page contact info only no need to display compare page.
if we select two contacts then it should display first contact page, second contact page and compare contact age page also. (here first contact and second contact columuns should match. example address, country but age not required to match)
if we select three or more contacts they should get a message please select two contact records only message.
Now my question is regarding to page displays, how can we count records then display first page, otherwise display all pages, else message. Here i want to generate report with sub template logic.
Thanks,
jag
Edited by: user7498756 on Aug 30, 2012 8:45 AM

as you were saying they will select the option so in your template
use if condition based on user input to execute the block you need .
if selected value = first member
call subtemplate first part
end if
if selected value = second member
call subtemplate second part
end if
if selected value = more than 2
keep static message
end if
in subtemplate create
2 parts of code
first part
will have first page logic
second part will have
its logic required

Help! one page displays incorrectly

It is as if the assets won't layer on top of each other
correct how it looks in safari after html exported to dreamweaver
This is the only page displaying incorrectly
www.suttonbandb.com

To answer my own question - in case it helps anyone else. Just tried duplicating the offending page and renaming and relinking and it seems to work. Not sure why exactly but it now seems OK.

Configuring Page Display in Preferences

I have Adobe Reader 6.0 on a Win98SE computer. When I go to "Edit", "Preferences", "Page Display" comes up first. There is a section at the bottom "Magnification" with 2 boxes, Default Zoom, Max Fit Visible Zoom. Both boxes have question marks, other jibberish, what am I supposed to enter in these boxes? I keep on getting an error window saying "The value of the magnification must be "Fit Page", "Fit Width", "Fit Visible", "Actual Size", "Reflow" or it must be a value between 8.33% and 6400%", then won't let me make any other settings, I just keep getting the same error window. I am a non-techie so please make your reply easy to follow. Thanks.

Reader always opens, maximized, when pdf accessed through IE7. I have tried to re-size, close, and re-launch from browser but reader ALWAYS reverts to opening maximized. I can open Reader, minimize it, and then access a pdf from the browser and it will open inside the minimized Reader window but that is the only way I can open a pdf to a minimized Reader window from my IE7. How do I clear this or reset something so the pdf will open in a minimized Reader window? I've looked in so many different places for this answer over the past few days and nothing.

2-Page display in Acrobat 9.1.2

I have a document created in ID CS4, of multiple facing pages, and exported to PDF. But when I open it in Acrobat 9.1.2, and switch to 2-Page view, it displays with page one (a right-hand page) moved to the left of the screen, and page 2 (a left-hand page) to its right on the same screen. From then on, all the RH pages display on the leftt in Acrobat, and the next LH pages display to their right.
Is there no way to get Acrobat to display a single RH page, and then display each 2-page spread as they actually appear in the document?

Thanks Bernd, yes that works, and your help is appreciated.
It's a bit annoying that Acrobat reverts to single-page view each time the file is closed. Can't this setting be sticky?
Also, the option you've pointed out seems oddly worded, which I guess is why I couldn't find it in the online Help -- the first page is part of the document, so I wouldn't have thought to call it a "Cover Page". But it only works if you select this option *after* selecting Two-page mode, so it doesn't seem very obvious to me.
But I guess not all menu phrases can seem immediately clear to everyone who reads them. Tricky business, UIs.
Thanks again for assisting me!

How to populate a table in JDeveloper 9i on page display?

Can anybody help me out regarding this issue.
The issue is i want to populate a table on displaying a page in OAF using JDeveloper.
The methods which i know are populating on clicking button,etc.
But how to populate on first time page display.

It would be easier to answer in case you have provided more details of what you are doing currently.
Anyway, assuming that you are trying to show data from some DB table on an OA page and you have the mapping done on your OA table columns, all you need is call executeQuery on the VO attached to the table in the processRequest of the page controller.
--Shiv

Incorrect functionality of Embedded tag in html page, displaying object on top of all layers of Adobe air application native window

Title
Incorrect functionality of embed tag in html loader for adobe air development
Description
Problem Description: If we had loaded youtube.com video url in a view stack and navigate to other index of stack or away from we UI screen within the same native window video or embeded tag of flash player or any other embed object will be displayed on top of all screens layer in same position of where the object should be placed in side of html loader only.
Steps to Reproduce:
1) go to http://get.straweb.com/StraWebBrowser/StraWebBrowser.air download and install
2) load 2 tabs and in the 3 tab load video player of youtube.com which will a sample video
before completing the load of 3 tab which trying to load video from youtube.com, navigate to other tabs 1 or 2 in few second once the flash player of youtube.com video player is load it will display in the current tab or UI screen.
3) Try navigating to other tabs than youtube.com loaded tab you see the flash player is on top it stable.
4) navigate to 3 tab and try to navigate to other tab you can observe that so how it will not show that flash player and only visible in that 3 tab which is fine.
Actual Result: Embedded tag of html page displaying on top of all layers of Adobe air application native window
Expected Result: Embedded tag of html page should only displayed in side htmlloader
This you can replicate in any adobe air plugin update and on any Hardware and Environment.
Applicable to all sdk versions of adobe air.

Adobe Bugbase: Bug 3823839 Incorrect functionality of embed tag in html loader for adobe air development

Since upgrading to FF5, i get the following xml error on local development server (IIS 7 Windows 7): XML Parsing Error: no element found, Line Number 1, Column 1. The pages display fine when uploaded to hosting server. How do i resolve it

All aspx pages running locally via IIS or Visual studio inbuilt server can not be displayed in FF5. This problem has only occured since upgrading to FF5. The same sites/code worked fine with the previous version of FF.
When uploaded onto a hosting server the pages display fine. Pages all display ok on local IIS on IE, chrome, opera etc.
I do go through a proxy server, but so do the other browsers.
All this means i can't develop locally on FF. Help please!

Maybe your application doesn't support "Send NTLMv2 response only. Refuse LM & NTLM".
https://support.software.dell.com/zh-cn/foglight/kb/133971

Why is login page (to register to use this forum) and other pages displaying foreign characters (e.g., বাংলা (বাংলাদেশ) when am using English (U.S.) versions of IE6 & Opera 10.6 to contact you (as FF4 hanging computer)?

FF4 hanging badly, so used IE6 & Opera 10.63 to register with & access Mozilla support site. Some words on those pages displayed in a foreign language (Arabic script?? )-- example, বাংলা (বাংলাদেশ)
Foreign characters on initial Support registration page, were in lieu of English words asking to select UserID & Password. (Page not entirely in foreign language--only parts. Request to repeat password choice, enter email, were in English).
I registered (guessing what to enter). Went to Support page [support.mozilla.com/bn-BD/kb/ask]. Greeted by statement: "Our volunteers haven't translated this article into বাংলা (বাংলাদেশ) yet."
No idea what language that is, or why u think I can read it. Presently logged in from U.S.

That is Bengali ([http://www.mozilla.com/en-US/firefox/all.html]). Firefox 4 no longer has the language setting in the user agent and in your case it doesn't seem to work to detect the language.
You can change the bn-BD in the link(s) to en-US on the Mozilla sites.

How to publish a web page displaying a JFX app ?

Hello (again '-_-) !
I'd like to create a web page displaying a JavaFX application.
When I launch the html file generated by NetBeans in the dist folder, It works perfectly, but when I put the same files (.html and .jar) on a webserver, the app never starts... I only get the Java image-loading spinner.
Is there something else to do to plubish a web page displaying a JFX application ?
Best regards,
Cereal.

Ok, so i read the "10 minutes tutorial" and i think that my files are ok :
DemoFFE_browser.jnlp :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://xxx.xxx.xxx.xxx/camera/ffe/" href="DemoFFE_browser.jnlp">
    <information>
        <title>DemoFFE</title>
        <vendor>fjeannet</vendor>
        <homepage href="http://xxx.xxx.xxx.xxx/camera/ffe/"/>
        <description>DemoFFE</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="http://dl.javafx.com/javafx-rt.jnlp"/>
        <jar href="DemoFFE.jar" main="true"/>
    </resources>
    <applet-desc name="DemoFFE" main-class="com.sun.javafx.runtime.adapter.Applet" width="176" height="144">
        <param name="MainJavaFXScript" value="demoffe.Main">
    </applet-desc>
</jnlp>DemoFFE.html :
<html>
<head>
<title>DemoFFE</title>
</head>
<body>
<script src="http://dl.javafx.com/dtfx.js"></script>
<script>
    javafx(
              archive: "DemoFFE.jar",
              draggable: true,
              width: 176,
              height: 144,
              code: "demoffe.Main",
              name: "DemoFFE"
</script>
</body>
</html>The java console still displays this message
exception : null.
java.io.FileNotFoundException: JNLP not available: DemoFFE_browser.jnlp
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception : java.io.FileNotFoundException: JNLP not available: DemoFFE_browser.jnlpAll my files (DemoFFE.jar, DemoFFE_browser.jnlp and DemoFFE.html) are in the same directory.
Does somenoe know where to set the path of DemoFFE_browser.jnlp ?

Adobe plugin cannot set Page Display Preferences

I have a lot of scanned documents and read them within IE 6.0 through a web interface using a custom solution. I have to use IE 6.0 so I can't just upgrade or use another browser, unfortunately. The issue is that now, all of a sudden, the documents open up in Fit Page view instead of Fit Width view. I have set preferences in the Adobe Reader application and tried to change them in the plugin window, but it never keeps it's settings. I have tried Adobe reader versions 6, 8, & 9 and they all do the same thing. I have tried changing the setting in the plugin then closeing everything and rebooting, but it still doesn't keep the settings. Is there a configuration file or a registry setting for the plugin that I can force a value? I've been working on this for weeks now and I can't think of anything else I can try.
Thanks in advance
Jason

Bill
Thanks but I am using Edit>Preferences>Page Display but it will not say what I set it to after restarting the program.

Adding Page Display options to the Toolbar (Tool Sets)

I'm not seeing how to add page displays to the Tool Sets. Is there a way to do this?
Ditto for returning to beginning or end of Document, or even returning to previous position. These were available in Acr. X
Thanks
(Mac Mtn Lion user)

I'm assuming, since you said, "These were available in Acr. X," that you're asking about Acrobat XI.
The easiest way is to right-click (or Control-click) on the toolbar, and choose the tools from the menus shown below:

Web pages displaying incorrectly e.g. no Wonga slidebar though sliders still visible and workable

I've had this problem for the last few weeks - i.e. on Firefox 8 and 9 which I changed to today in the hope it might fix it. It didn't. No pages display as they should. E.G. on the top of this page where you see 'user name', 'sign out', 'inbox', 'other applications', these are surrounded on three sides by thin lines only. The background is white. Sign in boxes on various sites consist of two slightly misaligned text box frames that make reading the word difficult. They still work though! Sorry if I'm not describing this very well. Hopefully you get the gist. I've tried emptying the cache in options and made sure my add ons etc are up-to-date as per the advice for incorrectly displaying web pages. Any help much appreciated. (its probably something silly I've done but I just can't fix it.) BTW pages display properly for the other user on this laptop (i.e. on their side!)

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Page Display Question

Similar Messages

Maybe you are looking for