"Page from Sample" items are missing

We purchased Dreamweaver after reading a few manuals. The feature that we liked was the ability to open a restaurant sample, or template. However, none of these items appear on our copy of dreamweaver.
Can anyone explain why we have no samples in our version?
Thanks

Scott_Avery wrote:
Holy cow! So I'm not going nuts, after all!
I was trying to do some form building using CS4 and Dreamweaver CS4 On Demand book.. and their description and what was availiable didn't match.
Thanks for the explanation!
Looks like some books will need to be updated.
I have just checked the CS3 and CS4 editions of that book in the Safari Online library. At a quick glance, all that has been done to the opening section of the chapter on forms is to update the screenshots to use the Dreamweaver CS4 interface.
It takes a long time to write a book, so it's not unusual for an author to create most of the examples even before a beta version of the software is made available. I know, because that's how I manage to publish a 900-page book within a month or so of the software's release. Unfortunately, the author of Dreamweaver CS4 on Demand relied on sample pages from the previous version, and didn't bother to check they were still there. There's a lot of pressure on authors just before publication time, but I'm suprised something like that slipped through.

Similar Messages

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing.

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing. I do not use iCloud because I have no wifi at home, limited data available for regularly backing up, and I have a 64GB phone and don't wish to pay to upgrade from the 5GB iCloud storage. Am I doing something wrong? It worked so seamlessly on my loaner phone that I am completely stumped as to why it will not restore those items to my original phone again.

The iphone is designed to be synced to your computer or cloud service. Your contacts should be in whatever program/service you have chosen to sync.
If you have failed to do this, then they are likely gone.

Most items are missing from BSIS

Hi,
I'm querying BSIS (direct read from table) via SQ01, and most items are missing. It seems to depend on the general account number: those registered in a profits-and-loss type of account are missing. Those registered in a balance-sheet type of account are here. They're not in BSAS either. Are all uncleared items supposed to be in BSIS? Where can I look for those?
Thanks.

Thank you for letting me know that this is a designed behavior - odd as that may be.
I ALWAYS search this forum before posting a question and usually have very little luck. I am either horrible at framing my search criteria or too impatient to look through dozens of pages of hits that aren't very well sorted for matches to my keywords.

Shopping cart line items are missing while transfering from ITS to EBP

Hi everyone
I am Raghu, working on EBP (version 2.0)
Some shopping cart line items are missing while transferring the shopping cart data from ITS to EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are getting updated for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated and usually the first line item gets missed out.Hence the the system fails to create the follow on documents in R/3.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but couldn't find the cause for this..
Can any one please advise me....why this is happening?
Your immidiate ersponse will surely help me a lot.
Thanks,
Raghu

Hi Yann
Thanks for your support.
Yes, we are using EBP2.0/CRM 2.0C & the support pack level is SAPKU20C23.
Please advice
Thanks
Raghu

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

Line items are missing during transferring ITS to EBP--tricky problem

Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
Ravi

Hello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe

Flash CS4 Sample Templates are missing

My sample templates are missing, all that shows now are Cateregory: Advertising and different size banners. I searched my harddrive and found the rood folder where they are stored but only the folder for Advertising exist.
I haven't deleted anything, so could it have been a glitch at installation, I had startup problems with Flash constantly crashing at the splash screen and finally had to uninstall and reinstall.
Running WinXP SP3.

Thanks for replying.
I do remember them being part of an earlier version maybe MX. Did some checking around as I was under the assumption they were part of CS4 due to some diagrams found on pages 264-265 of "Flash CS4: The Missing Manual". The bottom line is it is now listed in their Errata.

Page from Sample - Mobile Starters - jQuery Mobile with theme not working on mobile

I created a new webpage - New - Page from Sample - Mobile Starters - Jquery Mobile with Theme and did not modify it.
That does not work on an iPhone or Android.
What am I missing? Is there an update to make the jquery mobilesite work?
This is how it looks in dreamweaver
http://ricston.com/push/test/screenshot_dreamweaver.png
This is how it looks on my phone:
http://ricston.com/push/test/screenshot_galaxy.png
The page for the template is here http://ricston.com/push/test/test.html - As you can see, nothing has been changed.

Thank you. I was having the exact same problem. I even upoaded the unmodified starter page, just in case it was something I did. Inserting the viewport line fixed it. (Now I need to go back and insert that line into each of the pages I was working on.)
The question remains, however, as to why the mobile starter pages don't include that line in the first place.
[edit] FYI - On Dreamweaver CC, it's under the "common" group within "insert". (I would have expected it under "JQuery Mobile", but it's not there.)

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock

Items are missing in self-installation kit

I ordered high speed internet (faster plan) yesterday. I chose combined modem and wireless router.
Today I just received the self-installation kit and I found out that several items are missing. The first one is the phone line filter and the second one is the CD.
The package only contains a modem, phone line, cable line, power cord, user guide, and quick uide. That is it.
I want to know what else is missing in my package?
Thank You in advance.

Ok.
#1 Try going to https://activate.verizon.net/launch/welcome
#2 Folllow the directions there.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Important global parameters from Financial Accounting are missing for Asset

Hi friends,
When I'm trying to assign CHN Chart of Depreciation to c.Code 0319 the below error message is giving by SAP Sytem. This Chart of Depreciation is already 4 C.codes are using.
Could you pleasea provide the detailed procedure...
Error Message is:
The result of the check of company code 0319 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
Thanks,
shafi

Hi Shaik,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

Visual Studio 2013 Pro - Winforms toolbox icons beside items are missing for some 3rd party vendors controls

I noticed last weekend after installing VS 2013.4 update that the Winforms toolbox, while showing all items, did not display the icons beside the items for any custom/third party Winform controls. The only icon
showing in the toolboxes are the Pointer icon. I can select and drop any control onto a project, and as soon as I move mouse into the design surface the icon shows. Neither the
builtin Winforms controls nor the WPF toolbox exhibit the same symptom. It is specific to Winforms third party controls (ActiPro and DevExpress). At first I thought it was due to the update, then I found that my laptop was
already exhibiting this symptom, running 2013.3 (I had not dropped any controls from the toolbox in the past few weeks so I did not notice).
The two machines (laptop and workstation) are running Windows 7 64-bit Professional and Ultimate, respectively. These machines are dedicated to development, and are secured, also running Norton Antivirus.
I also have VS 2010 and VS 2012 which don't exhibit the symptom, though I finally removed 2012 last night during my adventures. I had all three VS side by side, running well for months (I added VS 2013 in June). VS
2013 had been functioning well on a daily basis for the dozen or so Winforms projects and the odd WPF or MVC project.
I use DevExpress v2014 and ActiPro controls; I have been using them for years now.
I've spent 2 days trying remedies that include:
Resetting Toolbox
Removal of *.spd files in %APPDATA%, restarting VS
Uninstall Visual Studio, remove and delete of any Visual Studio remnant in the registry, Program Files(x86), %APPDATA% and %PROGRAMDATA%, reinstall.
Repeat step 3 with VS 2013.1 and .3
Downgraded .NET to 4.5.1 to match my third, correctly functioning computer (also running Windows 7 x64 Ultimate).
DevExpress has told me this isn't a problem they have seen. At first I agreed, since my ActiPro controls also are missing their icons, but then I noted that other vendor controls display fine. Not sure what else to do but to nuke the workstation and install
from OS up.

DevExpress is discussing this issue in the thread here : https://www.devexpress.com/support/center/Question/Details/T174133#comment-a98eedf1-ca54-4920-a2d6-49506ddae5b5
The small sample they provided in the thread actually reproduces the bug in my environment.
Since I cannot post screenshots here on MSDN forum (I explained above, when I try to attach pictures I
receive an error that my account is not verified). There is nothing more I can do.
This appears to be a bug in Visual Studio 2013. VS 2010 and 2012 are on the same machine and do not exhibit
the problem. It is frustrating how unresponsive Microsoft is to my issue. I am a long-time MSDN subscriber, as well as customer of multiple seats of the retail copies of Visual Studio. It looks like the only way to get attention is to pay for a incident. If
Microsoft is interested in actually seeing this bug in action, I have 2 machines that are preserved. I have installed a fresh environment on my backup PC.

Apple Menu items are missing. How do I restore them?

My Apple Menu is missing some items. Not sure of all that may be missing, but the ones that I use that are missing include "System Preferences," "Restart," and "Shutdown."
System Preferences is still installed and available from the Applications folder, and I can restart or shutdown the system in other ways, but I'd sure like to get those items back on the menu.
I'm not what caused this, but I did some system maintenance including an iDefrag full defragmentation and some tweaking in Onyx. Can't say I know at which stage this happened, but the system seems to be behaving normally but for the missing items.
System is a Macbook Pro 17-inch, Mid 1009, running OS X Mavericks 10.9.2.
Thanks for any advice you can offer.

As it turned out, restarting the system didn't help, but shutting down and starting again did. Not sure if there's a difference between a restart and a shutdown+start, but I know there is a slight difference between a warm boot and a cold boot on PC, so maybe there is.
Anyway, the problem solved without major surgery. This specific option of removing the System Preferences menu item isn't available in Onyx, though removing the Restart and Shutdown options are (which I did not select). So, I guess I'll chock this up to an anomaly.
Thanks for the help guys.

How to print the Actual Check on 1st Page if line items are more for F110_p

Hi,
How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
I tried using
IF &PAGE& EQ '1 '
/E 545 --> text element
ENDIF
but it is of no use.
Please let me know if anyone knows. Thanks in Advance.

Hi Krishna,
I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
IF &PAGE& = 1.
**PRint all check values..
ELSE.
***Print void values
ENDIF.
Close the thread if your question is answered.
Regards,
Sairam

Some Line Items are missing in Standard SAP FI/CO Reports

Dear All,
while taking printout of SAP Standard FI/CO Reports some line items and total value are missing. E.g using TCODE FBL3N, it shows correct value after inserting selction inputs but when displaying it in spool request or taking print out it misses some line items and total value.
Kindly help me in resolving the issue.
Regards,
Majid Khan

Problem was caused by support pack SAPKB62063 and SAPKB62064.
Apply OSS note 1100728 which was corrected in SAPKB62065.
Giana

"Page from Sample" items are missing

Similar Messages

Maybe you are looking for