Page get stuck or freezes

Hi,
We have used Captive 2 to built course & publishing it
for SCORM 1.2 for eLearning output.
We have used default loading (100 %) from Captivate movie
while publishing.
Some of the pages get stuck or freezes when we use Captivate
slider when we see launching through LMS(Aspen & Docent). And
once stuck it does not moves ahead. This issue also takes place
even for the course which is run offline as well.
Is there any way to we can run each and every page (using
slider) without freezing it ?
Thanks.
Regards
Chetan

I get this error when accessing your link
https://server.home.private/wiki/pages/M9q7b7H/Certificate_invalid_for_one_site. html
Linc Davis wrote:
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Similar Messages

My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

My spot healing tool gets stuck and freezes and won't keep up with the curser. I'm using LR4.

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

SuPM home page getting stuck and couldnt able to enter

Dear All,
Greetings....
we are not able to enter into SuPM home page and getting stuck while its loading.. due this cause, we have installed flashplayer_10_ax_debug (No flash player exist earlier).
Now while loading SuPM home page in Portal, its displaying..
Adobe Flash Player 10
An Action Script error has occured
TypeError: Error #1009: Cannot access a property or method of a null object reference.
     at com.sap.xapps.analytics.sr.material.command::MaterialGetListCommand/onServiceLocatorResult()
     at com.sap.mvc.control.events::Callbacks/onResult()
     at com.sap.xapps.analytics.sr.business::WebServiceFactory/resultHandler()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at mx.rpc::AbstractService/dispatchEvent()
     at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
     at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
     at mx.rpc::Responder/result()
     at mx.rpc::AsyncRequest/acknowledge()
     at DirectHTTPMessageResponder/completeHandler()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at flash.net::URLLoader/onComplete()
                                                                                [Dismiss All]    [Continue]
i tried even by giving both options but still same issue.
Please help.
Regards,
Nagarjuna

Hi Nagarjuna
The flex UI for SuPM is sturctured within the SUPM Portal packages OPMFNDUI and ANASUSTUI,so please re check whether you have installed the correct SuPM portal packages from service marketplace.
Since I see some webservice related message in the log please re check the following post installation step in the installation guide :
Configuring SAP UI Framework Web Service Proxies (look for the authorization details also).
If you still get problem during loading the SuPM UI through portal please go to NW administrator and view the error log.
Thanks
Debraj Roy
RIG APPS

HP Deskjet 5568 WiFi Printer - Last page gets stuck while printing

I bought a HP Deskjet 5568 two days ago. I have printed nearly 50 pages already.
I am having a problem while printing "manually" on both sides. It prints the odd pages first from back to front. While printing the last page (the first page of the document), the printer gets stuck. The page is halfway in and the printer just stays there. If I pull out the page, the 'orange' resume light blinks; if I press it, the printing restarts.
The problem is that after it gets stuck, the printer doesn't print anything. I have to delete the print job and now I have to print the other 'even' pages myself.
Please help me. Is the paper getting stuck part of the printing process (stupid question)? I don't actually think it's getting "stuck," I think the printer doesn't allow the page to come out for some reason as the page is actually fully printed (the data is all there).
I have also noticed that this only happens while printing in "manual" two-sided mode.
Also, I can't edit the printing shortcuts in the printer control panel. If I change the paper size to A4, the next time I open the control panel, it is once again set to Letter. Why is this?

Hi I_am_Ann,
I understand you are having an issue printing from the computer on your HP Deskjet Ink Advantage 2515 All-in-One Printer.
I do need some other information to assist you.
The current OS installed?
Did you install the printer on your computer?
This document should help take a look at the printer to make sure all is ok.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03243075&tmp_task=solveCategory&cc=us&dlc=en&lc...
Please feel free to contact me if you have other questions
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Amazon Cloud Drive page gets stuck on "loading."

When I try to go to my Amazon cloud drive, the page opens but it gets stuck on "Loading" and the drive contents never appear. The page loads fine in IE and Chrome and I'm not having problems with any other websites in Firefox.

Thanks ideato,
I gave that a shot and still the same symptoms.

Internet gets stuck.

Hi,
I have a macbook pro (2.6Ghz, i7) and since recently I have been experiencing a problem. Particularly when the computer is woken up from sleep. The page says loading but stays there and sometimes after a while the page loads very fast from the state of being stuck. Sometimes only around 80% of the page loads. This happens irrelevant of the browser.
Your advice on how to resolve this would be much appreciated.
Thanks
Michael

And it doesn't matter whether it is Safari or Firefox. The browser gets stuck and freezes up.

DVD plays well on some machines, gets stuck on others

Made a 20-minute DVD, having done all my editing, etc. in iMovie and exported to iDVD5. Once burned, tested it on my iMac and it worked fine. Also worked fine in a friend's stand-alone DVD player.
But some users since have this problem: the DVD plays well for a few minutes, but gets "stuck" after a while, and ultimately freezes. And it's not the same "stuck" point for each user (if that was the case, I would think the physical disk had a problem.) It's different points for different people that it seems to get "stuck" and freezes.
In one case, user took "stuck" disk out of stand-alone DVD player and watched it in their laptop (PC) and all went well.
Any hints as to why the DVD is getting stuck on some DVD players?
iMac G4 Mac OS X (10.4.4
Mac OS X (10.3.8)

Probably a "bad" burn, the result of a DVD-R that some players don't like.
Try these things:
1) another brand of DVD-R (I Like Verbatim)
2) Burn at a slower speed. To do this with iDVD you have to "save as disk image" and then burn the image with Disk Utility (DU) or Toast. For some reason, I can't always choose slower burning speeds with DU, not sure why.
John

Canvas gets stuck

What does it mean when a white circle with a black X in it appears in the upper right part of the Canvas? Whenever that happens, the canvas gets stuck on a single frame and freezes up. Scrubbing the playhead back and forth in the Timeline then does nothing in the canvas; there is no motion there. I usually have to quit Final Cut Express and relaunch it to free up the canvas.
What's the deal there?
Tom

Thanks for the info, Tom. It's FCE 2.0.3, and yes, the canvas is set to "Fit to Window." All these clips have been in the project for a long time, so there's nothing to render.
I sometimes enlarge the Canvas window to see details better, and that seems to be when the Canvas most often gets stuck and freezes (with the X appearing). Do you suppose FCE can't keep up the frame rate in a larger window?
Anyway, if it is processing something, it never seems to get finished doing it. And when it gets stuck, I can't unstick it without quitting and restarting the program. While the canvas is frozen, no matter where I click on the Canvas' scrubber bar, the video in the Canvas won't jump to the new place. I can also run the playhead up and down the Timeline witn no effect on the Canvas. It remains well and truly jammed. Very annoying.

My pc gets stuck and frozen when i try to disconnect

its already a few days now that i try to log out from my itunes account,and when i press the log out button my computer gets stuck and freeze.is there someone out there that can help me to solve the prob..thanx

i am sorry to say but there is no way to undo a software update to go back you have to go threw your phone provider and have then do a replacement on the phone and just not do the update. when they receive the phone they will send it off for testing and to have the bugs fixed

Got my mouse to swipe yesterday on Mav. but now the window (and Internet) gets stuck

Yupp.
I did the quick fix of rechecking everything for the mouse. And it did work yesterday.
It isn't working today.
Any fixes?
Thanks.
Kim

And it doesn't matter whether it is Safari or Firefox. The browser gets stuck and freezes up.

Flash movie gets stuck in the middle

Hey,
I have simple sliding pages mechanism in my flash file, all done with AS3 code. Now the pages, which are movieclips, are slid off the screen on a button press. Sometimes, everything goes smoothly, but on some people's computers the sliding pages get stuck in the middle, and then the next slide starts from the wrong position. This throws everything off the loop...I cannot understand why this is happening..as it only happens sometimes...I have rechecked the code millions of times...why is this happening??? Is it the code??
The file can be checked out at http://cleatbeat.com/halftime/issue5/index.html.
Any suggestions will be greatly welcome..am I doing something wrong in the code...??
Cheers,
Aditi

Can't say anything without seeing the codes.
I guess you have some errors at calculating the sliding effect.
When clicked too fast sliding errors occur.
You have to disable the click event till the the page stops at the right position (removeListener for the button, then addListener....)

Powerbook G4 gets stuck in Login window

My PB is having trouble starting up, sometimes it starts and most of the time it doesn´t. The only two times I have been able to start it , when I type my username in the Login window it gets stuck, it freezes...
I don´t have a clue what is going on both with the starting , turning on , and getting freezed in the login window
any ideas? thanks

Hello,
Sounds to me like a possible hard disk drive problem.
I would suggest booting from the Mac OS X disk by holding down 'C' with the disk in the drive.
From the file menu, I would select disk utilities and run disk repair on your hard drive.
Once that's done, reboot and log back into Mac OS X.
Best of Luck

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

Hi Coreenfrombc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck. Any ideas on how to resolve this please?

this is a perfect question to ask the users in the FCP X forum. Good luck. https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Page get stuck or freezes

Similar Messages

Maybe you are looking for