Page hijacks my home page after DSL modem interrupts

I seem to be having frequent DSL modem interruptions (5-10x/wk) from my provider, a local company in my area. Sometimes these interruptions are severe enough for a page to come up on Safari when the DSL connection is restored. The page is from SBC (presumably Southern Bell Communications) and reads as follows:
Success
Resolution Successful
The error has been successfully resolved. Please close down your browser and restart it to
continue browsing online
The URL of the SBC page is http://gateway.2wire.net/xslt?PAGE=HURL00
Now here is the problem I am experiencing. Even though I shutdown (i.e., quit Safari), when I relaunch it, this SBC page, in essence, hijacks my home page (www.nytimes.com) and I am unable, through any mechanism I have tried, to bring up the homepage - it always reverts to the SBC page. I click on the HOME icon, I type in the URL of my home page, nothing works. I've checked PREFERENCES and my desired home page is still set as my default. I clear out cookies. Nothing works, except to completely shut down my iMac and power it up again. This is a real pain.
Is this an ISP issue or a Safari issue? And is there a simpler way to get Safari restored so it works properly?

Hello ken:
Try deleting the preference file (com.apple.safari.plist) and restarting (reenter your personal preferences). Also, clear the Safari cache.
The 2Wire modem/router is the one SBC (aka AT&T) uses for broadband customers.
In answer to your last question, if the above does not help I think your ISP is at the root of the problem.
Barry

Similar Messages

Safari slow and Not Loading Web Pages after changing Modems?

Hello...I recently changed from an AT&T DSL modem to a Knology Cable Modem to improve speed and overall network capablity. However, ever since I have changed I have had problems with Safary lagging or not loading the websites. It doesn't do it all the time, but periodically. Sometimes it is worse than others.
Basic issue: When using Safari, it stalls when loading a website. Sometimes it will load, other times it will say that Safari cannot load the website. If you wait a while and retry loading it, it may then load it.
Has anyone else seen something similar to this or know what I can do to fix the problem? It is rather frustrating.
Thank you,
Jim

If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

How can I get my mac to return to my home page after closing, now it returns to last page viewed.

Can anyone tell me how to get my desk top IMac to return to my home page after leaving the internet? Now it returns to the last page viewed,
I hate that!

Depends what OS X and Browser you are using?
If you are on Snow Leopard (10.6) and Safari (5.1.7) then open Safari Preferences, select the General tab and make sure that:
1. Safari opens with: A new window
2 New windows open with: Homepage
3. Homepage: is set to the desired https: site

Firefox 9.01 hijacked my home page. How do I get my old homepage back?

Ever since upgrading to 9.01, Firefox has hijacked my home page. How do I get rid of ff opening its own homepage?
Thanks.
Henry Wu

Is your home page now https://www.google.com/ ?
If you are missing the traditional "black bar" at the top of the page, that has been replaced with an application button on the right side that looks like a grid of small squares. Some creative developers have posted add-ons to restore the old bar. I haven't tried these myself:
* [https://addons.mozilla.org/en-US/firefox/addon/proper-menubar/ Proper Menubar]
* [https://addons.mozilla.org/en-US/firefox/addon/you-google-bar/ +You Google Bar] - reviews indicate some problems

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

Unable to open Pages after new hard drive

I am unable to open pages after recently having to get my hard drive replaced. I have a time machine that I could get the application/files off of, but when I try to open it it comes up with the message:
"Check with the developer to make sure Pages works with this version of Mac OS X. You may need to re install the application. Be sure to install updates for the application and MAC OS X"
I have done all the software updates possible for both MAC OS and iworks compatibility, and nothing has worked. I do not have the original CD with me, so I cannot reinstall. Is there any other way to get the working version of the application off of my time machine?

(1)
Enter mac App Store and check if it state that Pages is installed on your machine.
If it does, you may download Pages 4.0.5 thru this channel for free.
(2)
Assuming that you aren't far from your original DVD for a long time, you may remove every files related to iWork '09 with my uninstall script
then
download and install the trial version,
don't run it
Trigger Software Update to download and install the required updater.
I apologize but I don't remember if the updater 9.0.5 apply the entire required changes.
After that you will have an up to date package which you will be able to use during 30 days.
When you will be back home, re-apply my uninstaller
install the package from your DVD
don't run the apps
Trigger Software Update to download and install the required updater.
After that you will have an up to date full time package.
To get my uninstaller,
go to my iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 22:42:02
Please :
Search for questions similar to your own before submitting them to the community

Blank page after adding portlet from sample provider

Hi All,
Homepage not appearing after Login, tried adding Sample portlet to HomePage!
I managed to configure and register the JPDK's Sample portlet provider as per the installation instructions.After configuration i tried the URL "http://yourserver/servlets/sample" and i got "Congratulations! You have successfully reached your Provider's Test Page"
Then tried to add a sample portlet (Hellow Worls portlet) to one of the regions of the my homepage using the Navigator.
Now, I'm not able to navigate to the home page after logging in from the portal Welcome page.
I'm just seeing a blank page after login.
This is the error i got in jserv.log file
page/Unexpected exception in servlet
java.lang.Exception: Invalid meta-data found in ProviderData process 4
     at oracle.webdb.page.ProviderData.parse(ProviderData.java, Compiled Code)
     at java.lang.Exception.<init>(Exception.java, Compiled Code)
     at oracle.webdb.page.ProviderData.parse(ProviderData.java, Compiled Code)
     at oracle.webdb.page.DataProcessor308.generatePage(DataProcessor308.java, Compiled Code)
     at oracle.webdb.page.DataProcessor308.process(DataProcessor308.java:2658)
     at oracle.webdb.page.PageBuilder.process(PageBuilder.java:684)
     at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java:89)
How can view the sample portlets from my home page?
Any help would be greatly appreciated.
Sapna

Yes. I selected yes to Require Proxy .
But no use. Where i'm doing wrong.
Under Proxy settings in Global seeting i've given the following info.
HTTP Server : alpha
HTTP Server :80
No Proxy Servers for Domains beginning with ALPHA
URL Connection Time-Out (seconds) :0
and in the provider edit page i set Require Proxy to 'YES'
Thanks in advance
Sapna

HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

I can not get past the license agreement and term and conditions page after updating my i5 IOS

Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

[IPhone SDK] How to close all pages after safari exit

Apps close when you hit the home screen, however i find that Safari seems to keep multiple pages open even you close it , which no doubt uses memory. so does anyone know how to close these pages after safari exit ? Thanks very much.

Does anyone know it , please give me some advises , thanks very much.

HT4623 Can not get pass Term and Conditions page after upgrade?

Can not get pass the Terms and Conditions page after upgrade?

Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

Struts goes to a blank page after signin

I have an application similar to Toystore but I get a blank page after signin. It should go to a defined home page. Right now the only way I fixed it is define a success action and forward there instead of the home page.
This is toystore code but mine is similar. I hope someone has seen this problem.
ACTION CLASS:
public class VerifySignInAction extends Action {
public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) {
String target = request.getParameter("target");
//home defined in struts-config.xml as:<action path="/home" forward="/WEB-INF/jsp/welcome.jsp"/>
if (target == null) target = "home";
* We shouldn't get here unless the LoginForm bean validation succeeds
LoginForm loginForm = (LoginForm)form;
toystore.controller.AppUserInfo.signIn(request,loginForm.getUsername());
//return mapping.findForward(target);//target is home but it goes to a blank page instead.
//Using success works but should not be needed
return mapping.findForward("success");
STRUTS-CONFIG.XML:
<action path="/verifysignin" type="toystore.controller.strutsactions.VerifySignInAction" input="/signin.do" validate="true" name="loginform"
scope="request">
<set-property property="application" value="ToyStore"/>
<set-property property="releasemode" value="Stateful"/>
<forward name="success" path="/WEB-INF/jsp/welcome.jsp"/>
</action>

I got the same when using UIX for signin page

Customizing the landing page after saving a list item

Hi,
I have a list that I want users to add new items but not return to the list after saving.
I've created a link to NewForm.aspx in our portal but when a user fills and saves the item, he lands on the allitems.aspx page of the list.
How can i make it retun to the portal instead?
Thanks a lot in advance

Hoep below articles help you:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f1badcae-4f7e-4e9e-a08a-17d8d583e83d/redirecting-users-to-a-different-url-or-sharepoint-home-page-after-submitting-infopath-form?forum=sharepointcustomizationprevious
http://techtrainingnotes.blogspot.in/2009/06/sharepoint-redirecting-to-page-after.html

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Refresh First page after returning from a framed pop-up window

HI Can anyone help me on this technical problem.
I have got one mainpage and from there i'm calling a popup with two frames (left, right). At frame right i'm populating the tableview.
So when i submit(button) in tableview(right), the table contents has to be replicated in the first page and the popup has to be closed. So far it has be done successfully.
The problem is when i return to the first page the page is not getting <b> refreshed automatically</b>. FYI, i'm not using mvc for performance reasons.
So i need your help on how to refresh the first page, after control passes from popup.
Here is the code, that calls the popup window
winvar=window.open("organization.htm", 'main','height=450,width=650,status=yes,scrollbars=yes,toolbar=no,resizable=yes');

Hi Craig & Raja,
Let me tell thanks for your response. But your valuable solutions are not working for me. Please, check this code and please let me know that any thing went wrong.
Here is the code
My main page is progress.htm
============================
<script language = "javascript">
    function openOrgTree(){
       var winvar;
       winvar=window.open("organization.htm", '<b>Main</b>','height=450,width=650,status=yes,scrollbars=yes,toolbar=no,resizable=yes');
</script>
<htmlb:inputField id          = "InputOrgPlan"
                        showHelp    = "X"
                        onValueHelp = "javascript:openOrgTree()" />
      <% if application->i_desc is not initial.%>
      <htmlb:tableView id              = "tvX"
                       headerVisible   = "false"
                       design          = "alternating"
                       visibleRowCount = "3"
                       fillUpEmptyRows = "true"
                       columnWrapping = "false"
                       onHeaderClick   = "MyEventHeaderClick"
                       onRowSelection = "MyEventRowSelection"
                       keyColumn       = "Text"
                       table           = "<%= application->i_desc %>"
                       iterator        = "<%= iterate %>" />
      <% endif. %>
      </td></tr>
organization.htm (is the frames container)
=========================================

<frameset rows="110%,*">
    <frameset cols="40%,*" >
        <frame name="left" src="tree.htm" marginwidth="0" marginheight="0" scrolling="No" frameborder="0">
        <frame name="right" src="table.htm" marginwidth="0" marginheight="0" scrolling="auto" frameborder="0">
table.htm (right frame)
==========================
   function callSubmit()
     alert(parent.window.name);
// displays the name as "<b>Main</b>" which i gave at the time opening oraganization.htm
//        parent.window.opener.refresh();
// window.opener.location.href = window.opener.location.href ;
         window.opener.refresh();
         parent.close(); // to close the popup
// all of the above are not working
   </script>
<htmlb:page onLoad = "callSubmit()">
<htmlb:button id            = "submitbutton"
                    onClick       = "myButtonClick"
                    onClientClick = "callSubmit()"
                    width         = "10"
                    text          = "Submit" />
i need onClick to populate the internal table and onClientClick to refresh the opener.
if event->id = 'submitbutton'.
      refresh application->i_desc.
      application->i_desc = i_desc.
Regards
Swaroop

Page hijacks my home page after DSL modem interrupts

Similar Messages

Maybe you are looking for