Page Layout components : corporate branding image and copyright

hi....
i am using R12 and my page consists of a table and the corporate branding image and copyright but because the table has many columns it spans along with the scroll but the problem is that the page layout line and copy right does not span with the table and stops in the middle
the page is not looking good at all...
i have tried so much with the width of the regions but no solution because i can't find a width for the page layout components.
please need help

user604057,
Its a framework standard to have the footer only to fit the width of the page. You won't find many pages which has a horizontal scroll and if they have, another issue you will have is the printing of the page.
--Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • Customozing Branding Image and Branding text on Logon UI of EP

    Hello Everybody,
                     I am customizing the Logon user Interface of EP6.0 SP9. I have modified the Par file and put new images in the Layout folder of Portal-Inf.I modified the UmlogobBotArea.txt file and changed the saplogo.gif with xyz.gif. I also replaced the branding_image.jpg and branding-text.gif with respective files(for e.g. abc.jpg and lmn.gif). Now when i restarted the server i am getting the saplogo.gif replaced with xyz.gif but there is no change in the Branding Image and branding text, it appears the same as before, even after i have changed the file names in UmlogobBotArea.txt. Can anyone plz guide me from where i can replace branding_image.jpg and branding-text.gif from the Logon UI.Help is also required on how to change the Logon Page color from Blue to White, which file needs to be modified for that.
    Thanks and Regards,
    Sarabjeet Singh.

    HI Sarabjeet
    Refer the following link
    https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Regarding the customizing portal logon page
    For further doubts refer
    http://help.sap.com/saphelp_erp2004/helpdata/en/22/6880a2875a6f4c944a4a9193ce4836/frameset.htm
    A bit more addition
    After uploading the renamed autheschemes you have to go to System Admin>>System Config>> Um Config>> Direct Editing..
    There you have to set the login.authschemes.definition.file property to the new name given to the authschemes.xml.
    Then restart the server.
    Regards
    Rajeev

  • Corporate Branding Image

    hello room,
    in the corporate Branding Image property inspector we have in Image URI = /OA_MEDIA/FNDSSCORP.gif
    Requirement:_
    i want this image(FNDSSCORP.gif) to change on the oaf page dynamically based on the VO query (in which i am calling company name dynamically based on the person_id)
    Below is a query for CO.java file tht i am using:
    import oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean;
    import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
    import oracle.apps.fnd.framework.webui.beans.OAImageBean;
    +:+
    +:+
    +:+
    +:+
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    +{+
    super.processRequest(pageContext, webBean);
    OAPageLayoutBean page = pageContext.getPageLayoutBean();
    OAImageBean dots = (OAImageBean)createWebBean(pageContext, OAWebBeanConstants.IMAGE_BEAN, null, "dotsImage");
    dots.setSource(OAWebBeanConstants.APPS_MEDIA_DIRECTORY "ABC.gif");+
    +// dots.setShortDesc(pageContext.getMessage("FND","FND_DOTS_SHORT_DESC"));+
    dots.setHeight("30");
    dots.setWidth("150");
    page.addIndexedChild(dots);
    +}+
    I would like the logo "ABC.gif" to change based on the column/attribute Company Name defined in my view object.
    Please help me.
    Brgds,
    Jenny
    Edited by: Jenny_Gomez on Feb 3, 2013 7:49 AM

    does that mean no one has tried to change the corporate branding logo from oracle to their various custom company logos in an enterprise that has group of companies operating...?
    plz guide us!
    Brgds,
    Jenny

  • Changing Branding Image and Keeping Our own Image

    Hi All,
    how can we change the portal log on page that is branding image and as well as branding logo...
    i want step by step procedure for this.
    Thanks,
    Sriram.

    Hi,
    Find some more links:
    How to change branding image of Portal?
    Portal Customizations Intro - Login Part 1
    Change of Logon Page
    Modifying The Logon Par(or customising the Logon Screen)
    http://help.sap.com/saphelp_nw70/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    Re: change the branding image of Portal
    How to change branding image of Portal?

  • Custom logon's PAR w/config branding image and branding text.....

    Hi all,
    I have changed the configuration of  the logon's branding-image and branding-text through their properties on the config tool. With the standard logon all works fine, but I have customized the logon's PAR and I Have changed the authscheme.xml, and now, the images that i have changed don't appear  on the screen. I just want to know if there is a way to fix this changing only the properties on the config tool (as the stadard does) or as i have changed the standard logon's PAR to a Custom logon's PAR, I must manage this images within this new custom logon's PAR?. Please help, thanks for watching
    Regards,
    MC

    Images were missing on the relevant path (server filesystem) for custom logon's PAR. That´s all
    Regards
    MC

  • Custom page layouts for iPhoto books- bleeds and type

    I've been digging through the forum for info on creating custom page layouts. I have the basics: print PDF (to capture the page BG and graphics elements), manipulate in PhotoShop and place the custom page as a full page photo.
    How does iPhoto deal with bleeds? Since I'm trying to recreate the style of the other pages I'd like it to match.
    Is all type in an iPhoto book rasterized? The printed PDF retains type. Will rasterized type in PS layouts match "native" text in iPhoto?
    I haven't purchased a book yet and I'm wondering if the book is sent to Apple as a PDF with vector data. If that's the case can custom pages be inserted into the PDF with vector type intact?
    Thanks all!
    rg

    gatz:
    Welcome to the Apple Discussions. I don't know much about bleeds but you can manipulate it in the iPhoto preference file with Pref Setter.
    Regarding the rasterized type, you'll have to give it a try and then create a pdf of the book to check it out. In iPHoto 5 we used to be able to get a copy of the pdf file that was uploaded to Apple but in V6 that's not possible. I think the pdf file may be the same as we get when creating it via Print to PDF. Here's the info I received from Apple about book quality and materials:
    I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
    "Thank you for contacting the Apple Print Products Customer Service.
    I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
    iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
    While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
    For more information regarding iPhoto 2, please visit the following article:
    iPhoto: Color, Black and White Prints Appear Garbled or Distorted
    For more information regarding iPhoto 5, please visit the following article:
    http://docs.info.apple.com/article.html?artnum=165501
    Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
    BOOKS
    All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
    Hardcovers Books
    The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
    Softcover Books
    The softcover books come in three sizes:
    - Large 8.5 x 11 inches
    - Medium 6 x 8 inches
    - Small 2.6 x 3.5 inches
    All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
    CARDS
    All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
    CALENDARS
    All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
    To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
    KODAK NEXPRESS 2500 Digital Production Color Press
    I hope you find this information helpful in answering questions on the iPhoto forum."
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How to find out which data control do the page layout components come from?

    hi,
    work in Jdev 11.1.2.3
    After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
    --i cannot find data control related information in the property pallete for the page layout component.
    Regards.

    This information can be found in the page definition file.
    Select the field in the page and then click the binding tab.

  • Can I create a completely custom page layout for a book, positioning and sizing pictures and text?

    I'd like to create a totally custom page, inserting photos at various locations and sizes as well as text regions.  Can this be done?   I haven't been able to find a way to do this.

    I've found it's worthwhile spending time fiddling and adjusting Lightroom's templates and saving to Custom Pages but I haven't found a way of removing a custom page layout once I've finished using it or tweaked it some more. Can you say how to remove one, please, johnbeardy? I can put them in and out of Favourites but the Custom Pages list just gets too long.

  • SharePoint 2013 - Missing Publishing Page Ribbon/Tab on custom page layout - Page language="C#" Inherits="Microsoft.SharePoint.Publishing.PublishingLayoutPage,.... VS CodeBehind="BlogDemo.aspx.cs" Inherits="DemoProject.Branding.BlogDemo"

    I created page layouts using Visual Studio 2013 and SharePoint 2013. I added both ASP.NET web controls (e.g. asp:Label, asp:HyperLink) and SharePoint web controls (e.g. SharePointWebControls:UrlField) in a page layout.
    However, when I deployed the solution, I cannot edit all the ASP.NET & SharePoint web controls (column fields from custom content type used for the page layout) except the web part zones.
    Then I found out about inherits property:
    1) if I use the code for the page layout as shown below:
    <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="BlogDemo.aspx.cs"
    Inherits="DemoProject.Branding.BlogDemo" MasterPageFile="/_catalogs/masterpage/DemoProject/DemoMasterPage.master"
    %>
    Result: There is no publishing ribbon/tab. E.g. Edit, Publish..... although both ASP.NET & SharePoint web controls can be displayed on the page layout.
    Screenshot:
    2) if I use the code instead as shown below:
    <%@ Page language="C#" Inherits="Microsoft.SharePoint.Publishing.PublishingLayoutPage,Microsoft.SharePoint.Publishing,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
    meta:progid="SharePoint.WebPartPage.Document" %>
    Result: Publishing ribbon/tab is available, but ASP.NET web controls won't appear. Only SharePoint web controls appear on the page layout.
    Screenshot:
    I wonder how I can combine both codes to ensure that the page layout can have publishing ribbon/tab and displays both ASP.NET & SharePoint web controls.

    Found a way to solve the issue
    I follow the solution:
    http://pinnacleofindiana.com/blog/developers/2012/03/28/creating-a-sharepoint-2010-page-layout-with-code-behind/
    http://blogs.msdn.com/b/kaevans/archive/2011/04/02/code-behind-page-layouts-with-visual-studio-2010.aspx

  • Printable Page - Corporate Branding

    Hi
    The corporate branding image disappears on Printable Page. The requirement is to print the branding image also.
    Thanks
    Gautam

    Is it a custom page or a seeded page? Have you done any modifications. Please provide enough details with your issues.
    --Shiv                                                                                                                                                                                                                                                                   

  • Image and label location in JButton

    I have a class MyButton that extends JButton. I'm trying to override the contains(int x, int y) method of MyButton in such a way so as to return true if and only if the point x,y is contained within either the button's image or the button's label. So I think I need to know the location of these components..... any idea how to find this information?

    Hi,
    Please check this path in EP Server.Brand Image and Logo Path
    Driver:usrsapSystemIDSystemInstancej2eeclusterserver0appssap.comirjservlet_jspirj
    ootportalappscom.sap.portal.runtime.logonlayout.
    The initial standard source code is here: C:usrsapF38JC30j2eeclusterserver0appssap.comirjservlet_jspirj
    ootWEB-INFportalportalappscom.sap.portal.navigation.masthead
    Please check it this [link|Exchange the SAP logo image in masthead with some othe image.;
    Hope Help full !!!
    Regards
    Vijay

  • How do I create sections in page layout mode?

    The "section break" option is always greyed out in page layout mode.
    But I want to create a newsletter with a cover page and then the other three pages will have different headers and footers and I want repeating images on them. This would seem to be quite normal for newsletters. Even the template newsletters do this, but they do do it manually, repeating the images for each page, and manually creating a header and footer for each page.
    I can do it word processing mode, but this is a page layout task - as indicated by Apple including the newsletter templates in the page layout templates.
    Is there anyway to create sections in page layout mode??

    If you compare Page Layout mode with Word Processing mode, you'll see that every page is a separate section.
    In Page Layout, you've got headers & footers, although it's possible some of Apple's Page Layout templates have it turned off, and you can turn off "Use previous headers & footers" on the first page after your cover page, so it seems to me like it's possible to do what you're trying to accomplish.
    A "section break" is a special character you place in the body text of a word processing document to force a new section (see also: page, column, layout, paragraph, and line breaks). In Page Layout, there is no body, and sections/pages are controlled by the Page Thumbnail View.

  • How to change the page layout to fit 2 portlets in a row?

    Hi,
    I am very new to Plumtree portal, please be gentle.
    We are in the trial and design phase for our company's portal and we are tring Plumtree now.
    We selected the page layout as one narrow panel and one wide panel. In the wide panel, I have a wide portlet to fit the whole row on the top, then we want to divide to 2 columns under the first portlet as the middle section of the page, so that we can place 1 chart on left side and 1 chart on right side of the wide panel.
    HOW TO DO IT?
    also, now I developed 2 testing portlets in vb.net. Top one is the wide one. The 2nd one is a chart, when I deployed it in the page, the chart overlaps the top portlet! HOW TO FIX IT?

    By default you can only lay out the portlets in the assigned columns and cannot span, but you could try cheating (I don't know what the impacts of this might be, though, so be careful)
    Change the layout to a 2-column that also has a content canvas (darker gray box). For your portlet you want to have span both columns, set it up as a content canvas (you may have to re-register it). I think that might work, but... honestly, I don't know enough about content canvas settings to konw what might happen down the road. I'm hoping "a portlet is a portlet is a portlet"
    Like this...
    [         content canvas         ] <-- put your portlet here
    [ narrow ] [         wide         ]
    It also sounds like you're using gridlayout on your .NET portlet - you'll want to change that to use flow. Grid will use absolute positioning (bad here). I'd suggest reading the .NET web consumer install / developer PDF for additional info on how to get ASP.NET portlets to work.

  • Replacing master page layout for documents

    Hi all! I have been making a book, and have been using our standard master page layout. I now have to change the master page layout of the whole book, and I have made a document that uses the new master page layout. I did the typical make new master page layout, gave it a name, and everything seemed normal. I then went to add it to the existing documents but, my new layout is nowhere to be found. How do I add this new layout? I thought I could just change out the current master page layout for the new one. The only changes are the graphics at the top, and some header and footer changes. Body text stays the same. I'm on FM11 by the way.

    > I then went to add it to the existing documents ...
    How? Import Formats from the Book menu should do what you want, followed by an Apply Master Page operation (assuming the new pages have exactly the same names as the old pages to be replaced).

  • Crossdomain Image and smoothing security...

    Hi there,
    I have once again the big problem of loading images from all around the www (my users just type urls to their images, not I do). Everything works fine if I just use an <mx:Image> element to load those images into my flex app. The problem is, that I cannot read the Bitmap content and so even build in functions like smoothBitmapContent (from SDK 3.5+) do not work when no "crossdomain.xml" exists on the foreign server.Took me some hours to finally understand why this stuff does not work.
    I have now either really crappy pictures (if scaled in any way you can read almost nothing on them anymore) or no pictures because of sandbox restrictions. As far as I understood the reason is that your app should not trust the foreign data that is delivered and executed inside your Flash context. Because somebody could deliver an evil swf that could ready data that it should not read and so on. But why does the other host require a crossdomain.xml? Does the other sever need to tell me that I can trust his images? This doesn’t make much sense does it?
    I found some examples of a image proxy for my server, but this is not how it should work and I don’t want to bundle all bandwidth on my “small” server if image hosters have hundreds of servers to load images in proper time.
    Any HTML page can load the same images and manipulate them without such restrictions. If there no workaround to that problem? Shall I start over and turn to HTML5 instead?

    Flex harUI wrote:
    Remember, you are the person invited into someone else's home.  The server's
    crossdomain.xml is the allowing you to actually touch their stuff instead of
    just look at it.  There is no way the security model would allow a stranger
    to make that kind of decision, only the homeowner can.  However, as the
    stranger, you have to decide whether to touch their stuff.  It could in fact
    be dangerous to you as well.
    See, this is where Flash's security model makes no sense.  If I'm using PHP or .NET or any other language in the world, I can get all the bytes from an HTTP GET request and do whatever the hell I want with them, server be damned.  It's only Flash that is specifically preventing me from accessing them, it's not the policy of the server that's serving the object.  If the server didn't want me to be able to look at the bytes in a response, it would not satisfy the request in the first place.  Once the data have been transmitted over the network, there should be no restriction on what I can do with them.
    I have a similar objection to Flash's restriction on reading response headers.  If the server returns a 302 redirect, why can't I get at the contents of the redirection header?  I know it's not supported by the browser plugin API but WHY NOT?  It makes working with YouTube, for example, needlessly difficult.  What possible security issue could there be?  The server is returning an important piece of information, they certainly don't mean for it to be kept a secret.
    Sorry, rant over...

Maybe you are looking for