Page layout: How to remove free spaces around an iview?

Hi,
I have created a page layout template into the EP 6.0 and I want to remove each free space in the top, bottom, right and left, around from the area of an iview.
It's look like an edge.
I think this space is pattern of each iview, they have approximately 5 pixels from de principal area (content) of iview.
Someone can help me?
Regards,
Carolina.

Hi,
I think you have to set the 'Add Padding inside Tray' to <i>no</i> in the Properties of your iView.
It's in the <b>Appearance - Tray</b> category of the properties.
You will also find some other interesting Properties such as :
- Show Tray (the frame around the object with the name at the Top)
- Show Object in Tray (the name at the top)
- Tray type (the "look" of the frame around the object : 3 possible values : fill, plain, of transparent)
Hope it helps.
Don't forget to close your thread if solved (add reward points ...)

Similar Messages

How to remove "Free Space" partition on MacBook Pro

So I made a dual boot thing on my MBP, one contained Lion 10.7.4 and the other I'm currently using has Mountain Lion 10.8. (I was afraid to like harm my computer so I dual booted first and then erased the 10.7.4 partition.) Anyways ever since I erased the partition it was left with free space. How can I claim that memory back?

Open the Disk Utility in the /Applications/Utilities/ folder and click on the drive.
If there's a partition above that free space in the list, move the slider at the bottom of it as far down as it will go and click Apply.
If there isn't, create a partition in that space, clone the contents of the partition below it there, restart into the newly-created partition, and delete the old one.
(86498)

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

How do you free space on the startup disk

how do you free space on the startup disk

If your disk is 80% full that is normal. Time Machine uses up to 80% of the disk space for local snapshots. To get rid of these snapshots simply plug in your Time Machine backup drive and run a backup.
If you have less than 20% disk space then it is time to roll up your sleeves and search for what you can delete and what you can offload to another disk.
If you have less than 10 GB you definitely need to delete or offload some files. You may want to maintain at least 20 GB of free space so when your disk starts filling again it will have some room before it hits that 10 GB mark again. More headroom is better. If you let the space fall much below 9 GB you might not be able to boot your machine.
Initial easy steps to gain disk space:
- Delete all files in the Downloads folder.
- Empty the trash.
- Start iPhoto, empty its trash and restart the computer.
Deleting files:
Run a Time Machine (or other) backup since you are about to delete and move files and you may need to recover from any inadvertent mistakes or decisions. You will need one external hard drive for your Time Machine (or other) backup and a second one onto which you will offload some files.
Then use the free application OmniDiskSweeper http://www.omnigroup.com/more to explore your volume in descending order by size so you can attack the problem from the top down, deleting the largest unwanted files first. Delete with caution and do not delete any system files. Remember to empty the trash after trashing the files.
Moving files:
Consider moving some of the no-often-used large files or directories to an external disk. Use ODS again to find them.
As noted above this will be at least your second hard drive. Your first one(s) is/are for your Time Machine (or other) backup(s). Do not offload files onto a Time Machine disk.
Format the second drive as Mac OS Extended (journaled). Using OWS to find large files/folders and copy them from the system drive to the external hard drive and delete them from your internal drive.
Then  > System Preferences > Time Machine > Options… > Remove the offload HD name from the exclusions list.
Now both your system disk and your external offload disk will be backed up onto your Time Machine disk.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
From: http://www.thexlab.com/faqs/freeingspace.html
To move your iTunes Music folder to another disk or partition:
To change the location of your iTunes Music folder, carefully follow the instructions in the AppleCare® Knowledge Base document "iTunes for Mac: Moving your iTunes Music folder."Additional information can be found in iTunes Help.
http://webcache.googleusercontent.com/search?q=cache:http://www.thexlab.com/105/ 00000849.html
Laptop users may want to consider having two iTunes libraries: a small library of current favorites on their computer, while their complete library resides on an external hard drive. Utilities like iTunes Library Manager enable you to easily have multiple iTunes libraries you can use with your account. https://www.macupdate.com/app/mac/7689/itunes-library-manager
To move your iPhoto Library folder to another disk or partition:
To move the iPhoto Library folder to a new location, employ the instructions in the AppleCare Knowledge Base document from http://support.apple.com/kb/PH2506 corresponding to the version of iPhoto you are using. Additional information can be found in iPhoto Help.
Laptop users may want to consider having two iPhoto libraries: a small library of current, favorite photographs on their computer, while their complete library, or archives of older photos are saved on an external hard drive. Utilities such as iPhoto Buddy and iPhoto Library Managerenable you to have multiple iPhoto libraries that you can use with your account.
https://www.macupdate.com/app/mac/12175/iphoto-buddy
https://www.macupdate.com/app/mac/7158/iphoto-library-manager

How SMON coalesces free space in oracle 9i and 10g

how SMON coalesces free space in oracle 9i and 10g?
Is it doing same as it was behaving in oracle 7 like looking through free extent table every five minutes (sys.fet$) to see if there are any adjacent free extents that can be coalesced into a single extent, and on every 25th cycle (i.e. every two hours and five minutes) it looks at the segment table (sys.seg$) to see if there are any temporary segments that need to be eliminated, as explained by jonathan lewis?
what are extent and segment tables available in oracle 9i and 10g like sys.fet$ and sys.seg$ in oracle7?

>
how SMON coalesces free space in oracle 9i and 10g?
Is it doing same as it was behaving in oracle 7 like looking through free extent table every five minutes (sys.fet$) to see if there are any
adjacent free extents that can be coalesced into a single extent, and on every 25th cycle (i.e. every two hours and five minutes) it looks
at the segment table (sys.seg$) to see if there are any temporary segments that need to be eliminated, as explained by jonathan lewis?
what are extent and segment tables available in oracle 9i and 10g like sys.fet$ and sys.seg$ in oracle7?I think you need to go and have a look at the Oracle 9i documentation here
http://www.oracle.com/technology/documentation/oracle9i_arch_901.html
and automatic segment management in 10g
http://www.oracle.com/technology/pub/articles/10gdba/week15_10gdba.html
HTH.
Paul...
Software - OS (+ version), Server,
Hardware - CPU + Disk configuration.
Please include all of the above information with database queries.
This will help those who are trying to help you!
Furthermore, please do not top-post and do try to trim your replies!

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream

How to remove ghost space on Camera Roll under Usage. No photos on camera. 545MB shown on Camera Roll and 1.8MB on Photo Stream?
Trying to clean up space to download updated iOS. Thanks!
Have tried unsuccessfully the left swipe and pressing the red delete. No change.

The only problem is I have only 1.6GB available and need 3.7 to update to the iOS7. I also have 2.6GB in the "Other" catagory. How do I access the "Others" area in iTunes in order to see what is there and what I might be able to delete in order to create the amount of space needed. Thanks for your help!

HT1222 How do I free space in my phones memory to down load new os

How do I free space in my phones memory to down load new os

Most with iPhone4 have not been able to delete enough stuff in order to download iOS7 over-the-air. The easiest thing for you to do is do the update via iTunes.

How do I free space on my computer?

How do I free space on my computer?

Hello,
Let's see if we can find out where the big users of space are first.
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/

Caching issue - How ro remove cache from the portal iview

Hi,
I am facing problem of caching.In my application I am substituting one user(user 1) to some other user(user 2).Based on the substitution(latest substitute user 2),I should get the values for the User 2.
But after substitution,I am getting the values for the user 1 and after some time(2/3 second) I am able to get all the values for the User 2.The application is working fine.But some how its retaing the previous values of the user 1.
Can anyone please suggest me how to remove the cache from the iview.
Regards
-Sandip

Hi Sandip,
Enterprise Portal caching can be taken care or in a number of ways, all these are listed in the doc below:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/71d7b8dc-0701-0010-dfba-881dba1b5b95
- Regards, Dibya

How to remove blank spaces in the source code of my page?

I created a page with the following code for testing:
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/>
     <dsp:droplet name="ProductLookup">
          <dsp:param name="id" value="xprod2046" />
          <dsp:param name="elementName" value="product" />
          <dsp:oparam name="output">
               <dsp:valueof param="product.DisplayName"/>
          </dsp:oparam>
     </dsp:droplet>
</dsp:page>
It only shows the product name in the browser. But if I look at the source code of my page he created 61 lines in response to this code, where a line is the product name and the other 60 have nothing.
I know how to remove these lines that the ATG creates no content because my project is full of these empty lines.
Anyone ever had this problem and could help me?
Thanks

Hi ,
Yup this is a problem ,
you can use following ways :
1- use jsp comments eg :
<dsp:page>
<dsp:importbean bean="/atg/commerce/catalog/ProductLookup"/><%--
     ----%><dsp:droplet name="ProductLookup"><%--
          ----%><dsp:param name="id" value="xprod2046" /><%--
          ----%><dsp:param name="elementName" value="product" /><%--
          ----%><dsp:oparam name="output"><%--
               ----%><dsp:valueof param="product.DisplayName"/><%--
          ----%></dsp:oparam><%--
     ----%></dsp:droplet><%--
----%></dsp:page>
2- End tags at next line :
e g :
* <dsp:page
* ><dsp:droplet name=”xyz”
* ><dsp:oparam name=”output”
* >Name: <dsp:valueof param=”abc”
* /></dsp:oparam
* ></dsp:droplet
* ></dsp:page>
3- Always use TAB instead of using SPACEBAR whie writing source code.
4 - From JSP 2.1 onwards we have a page directive trimwhitespaces ( see if that works , i was not able to ), google for it for more info
5 - You can modify your build scripts to remove white spaces from jsps while building EAR.(complex though, as you may not want to trim all white space.)
6 - modifying the deployment descriptor.
<init-param>
<param-name>trimSpaces</param-name>
<param-value>true</param-value>
</init-param>

How to remove extract space between pages in smartform without changing output

Hello Experts,
I've been given a requirement where I need to remove extra space between pages of a smartform (refer to the attachment). If you look at the following screen shot then you will notice that that there is a command provided to display details on these pages which has a checkbox 'Go to New Page'.
When I removed the above New Page comment then still I don't see the expected output (Refer to the attached screen shot 'Expected' to see what I need).
Also there is another there is another New Page command (as shown below).
When I tried to removed the above New Page Command then output was totally changed which user don't want (as shown below. Table should have been break on BCVI on red line, which happens today but with so much extra space).
To view the correct output how user want please have a look at 'Expected' screen shot.
Now the question is what change I should make in my smartform to accomplish the expected output.
Many thanks in advance.

Hello,
I think that it should work, this construction of an loop node including all relevant items and at the event TAB event sort field only these items are copied in the OUTPUT_TAB which should be printed in a separate table on the form. After having printed the table, the content of the internal table is cleared.
I suppose that you first should check if this TAB "event sort field" includes the correct criteria for the necessary group change. If this event is really defined correctly, then I only have one hint for you.
I know that the only possibility to define a page break in a table in the Window MAIN is to use the following technique:
Define an outside loop node and in this loop node a table node, but this table does not have a internal table to be looped through. It includes only the fields to be printed, maybe you have to re-design your table node.
By the way only then you can define a command node including a page break during the processing of an internal table.
Regards
Juergen

How to remove empty space in CSS table and move spry menu bar?

Hello! I created www.stonecreekha.com about a year ago basically by watching youtube tutorials and haven't done much with it since so I've forgotten everything! In IE7, everything appears as it should; but in Firefox and IE8, the spry menu bar is positioned slightly higher than it should be (it slightly cuts off the foot of the golfer) and there is an empty space between the navigation bar and the photo. The source code can be viewed from the website. Here are some pics:
IE7 - how it is supposed to look:
IE8:
Firefox:
Dreamweaver:
So basically, I need to know how to remove that empty space between the navigation bar and the picture, and how to move the spry menu bar down a few pixels, in a way that it looks correct in IE8 and Firefox, and preferably IE7 as well.
P.S. I'm a noob so if you could be as specific as possible on what to do in Dreamweaver I'd really appreciate it. Thanks

I belive it's because of the -minus margin being used on the navbar, that you will need to use a negative margin to bring up both the left and right bodyArea divs.
Try : margin-top: -18px; on both divs. You may need to play around with that to get it more precise.
Again, not sure what effect that has on IE as I can't test it.
If it affects IE, then you may need to feed IE a conditional comment for the placement of those divs.

How to find free space in an ArrayList...

Hi,
I have an ArrayList with data randomly assigned to different indexs of the ArrayList.
I want to find out where the "gaps" are within the ArrayList... For Example There would be data in index 0,1,2,3,5 but not in index 4 . How would I go about finding this information.
Thanks
Chris

jwenting wrote:
kajbj wrote:
Praveen_Forum wrote:
I don't think we have to look into the free space's for ArrayList, as it is a dynamic growing arraylist you can just keep on adding the stuff in it takes care of filling all the empty spaces
I am i right?No, it will not fill a gap.in fact it will, after a fashion.
When you remove an item the remaining items are reshuffled to close the gaps.
When you try to insert an item beyond the last position (so at list.size()+2 or greater) you will get an error, and the insert will fail.I was more thinking of a situation like this:
        strings.add("One");
        strings.add("Two");
        strings.add("Three");
        strings.set(1, null);
        System.out.println(strings);The element at index 1 will be null (a gap in my view), since remove won't cause a gap.
Kaj

How do I free space on my hard drive in Mountain Lion?

How can I free up valuable space on my start up disk a/o hard drive space. I use FCPX a lot and I think there are many temporary files that I could easily get rid of within finder. I did this once with AppleCare's but as you know using Pro applications cost $100 per incident to get help using AppleCare. Please help me. Many thanks! My specs are as follows:
                3.5 GHz i7,
               16bg DDR3,
               AMD Radeon HD 6970M with 2GB of Video,
                OSX 10.8.4,
               2 TB hard drive with only 10.56 gb free.

Hard drive getting full or near full?
Do a search for and downlaod and install OmniDisk Sweeper and OnyX.
Here are some of my tips for deleting or archiving data off of your internal hard
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save to disc, Flash drive/s or to ext. hard drive.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, Flash drive or ext. hard drive and/or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Also, if you save old downloaded .dmg application installer files, you can either archive and delete these or just delete the ones you think you'll never install, again.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be thinned out, moved, also, to the external hard drive and then either archived to disc, Flash drive or ext. hard drive and/or deleted off your internal hard drive.
Good Luck!

How to remove footer space in Table

I have created a table in main window. after creating main area section, the footer section is appearing as an empty at the bottom. I tried to remove this space by giving zero height to the footer height, but the value is not accepted by the system. How can I remove the space created by the footer?
rajan

Hi Rajan,
Can you please tell me how did you solve this problem ?
I am facing the same issue in smartforms.
Regards,
Nitin.

Page layout: How to remove free spaces around an iview?

Similar Messages

Maybe you are looking for