Page Load Problem

Help. I have a Flash swf file that is approx 5 mb. I've
created a pre-loader that should run the preloader until the entire
movie is loaded. Unfortunately that is not happening correctly.
When I go to a browser to the URL that this file is uploaded to,
the movie (including preloader) does not show up until the movie is
at around 75% loaded. Even when I take out the preloader
completely, I get the same results that it loads about 75% of the
movie before it shows even the first frame. All I see is white and
I can't have this. If anyone can help, please do. I'm desperate for
this to be working properly.
Here is the link to the movie, you should be able to see what
is happening. (white page for a minute or so, preloader for 10
seconds maybe, then the movie) I want preloader as soon as I go to
the URL.
http://ponyexpress.jcg.com/A-109/a109-tobin2.swf
Thanks for any help.
Tobin Rogers

I'm actually not the one who built this module, but I
understand that all the audio (which is a lot) is added dynamically
and is exported in the first frame. Is there a workaround for
this?

Similar Messages

Macbook Pro/Mozilla Firefox --Page Loading Problems

I experience 'page loading' problems when going from one page to another. Sometimes the page takes a long time to load. Sometimes it times out and never does load.
Does anyone else with this combination of laptop and browser experience these problems? Any suggestions for overcoming this lag?

I know OS X used to have some problems with the way some routers do DNS. There was this topic a while ago:
http://forums.verizon.com/t5/FiOS-Internet/DL-page-load-speed-great-but-browser-quot-looking-up-quot...
For our Mac we had to set the router to send external IP addresses of a DNS system (either verizon's or something like OpenDNS which we use).
You could manually change the DNS settings on the Mac to see if that fixes the problem and then you could mac the change the settings at the router level if you like.

Safari page load problems and 10.5.3

Since I have upgraded to 10.5.3, I am experiencing Safari page load problems on all my user accounts on my 2.0 GHz Core Duo Black MacBook. I have reviewed threads in this forum and that of the Safari forum with no solution that solves the problem. so I post here in hopes of additional expert solution ideas.
*The Problem:* Since upgrading to 10.5.3 Safari fails to complete page downloads for some, but not all websites. When these same websites are accessed with Firefox there is no problem. With Safari the page load will stop at about 75% completion, or the page will not load at all.
Here is an example of a webpage that will not complete: http://www.realclearpolitics.com/
Here is an example of a webpage that will not load at all: http://cherylsguitar.com/site (my wife's business)
I also have a G4 iMac running 10.4.11 on the same WiFi network that does NOT experience the Safari page load problems. All is good and speedy on this trusty machine.
*Solutions Attempted:*
- Deleted plist (with no effect)
- Re-installed Safari from Leopard disk (with no effect)
- Scoured User Preferences in Library for offending applications, plug-ins, etc.
- Reset PRAM
- Reset and examined cable modem and router (AirPort Extreme 802.11g)
*Hardware and Network info:*
- 2.0 GHz Core Duo Black MacBook
- 2 GB Ram
- AirPort Extreme Base Station (generation 1) running 802.11g

Allan Eckert wrote:
Hi Perry Lehman;
Have you cleared out your cookies?
Allan
Allan,
Yes. I have reset Safari clearing all but website icons with no effect. I also tried turning of the Safari pop-up blocker with some very limited success. Disabling pop-up blocker will marginally help page load speed for some websites, but others still fail to load at all.
Thanks for taking time to post.

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

Web page load problem on iOS 6

I have recently upgraded iPhone and iPad to iOS 6 and found certian problems while serving some of the website. furhter I did little analysis and found some secure sites which are using
frames and calling external url in sided the frame are have problem. I have noticed that left navigation which is part of main frame is coming properly while page load and when response is rendering from
external call in body section of same frame, it overlaps previous rendered output. Further in one website which was use two external call had same behaviour that once one response is rendered its showing in web page but after rendering of response from another page
It overlaps perious response.
I had tried websites in different browsers and got same behaviour. I checked other versions and did not encountered this behaviour in iPhone 5, iPad 2, and iPhone 4s.

I am having the same problem hopefully it gets fixed
will check back here for a fix if you find one!
League of legends news

Dynamic Action - Fire on Page Load problem

Greeeting,
i created report with dynamic action Event = page load and action = submit . Event scope = Bind,
But it is submitting page continously , and i want to submit once..
how i will handle this.. created example please click on link
http://apex.oracle.com/pls/apex/f?p=20294:3:1276651806269601:::::

Hi,
>
Earlier on you said:
Page 1 Sales
Page 2 Sales Detail
items in sales page are product name id and rate.
<b>Product name on Page1 is linked with sales detail page 2.</b>
>
How? From your query this relation is not evident.
>
Now you say:
Parameters:
1- From Date
2- Date
3- Choose Area
>
You logic is rather mixed up. What is it that you want to achieve? What are the default values for the 3 parameters, if any? Which value on Page 2 is being set while navigating from Page 1?
Two wrongs do not make a right. So first of all abandon the DA that Sumbit Page on Page Load and focus on the fundamental issue related to your logic.
The suggested modified query below is NOT WHAT YOU NEED FOR YOUR REQUIREMENT but I am posting it so that you can at least get the report running and then work to fix your logic.
SELECT SS.OUTLET_ID,
SS.CAT_ID,
SS.ITEM_CDE,
SS.ITEM_NME,
SUM(DECODE(RETURN_IND,'N',ITEM_QTY,'Y',ITEM_QTY*-1)) QTY,
SUM(DECODE(RETURN_IND,'N',ITEM_QTY,'Y',ITEM_QTY*-1)*ITEM_RTE) AMT,
O.OUTLET_NME
FROM
(SELECT OSM.OUTLET_ID,
    PI.CAT_ID,
    PI.ITEM_CDE,
    PI.ITEM_NME ITEM_NME,
    OSM.RETURN_IND,
    OSD.ITEM_QTY,
    OSD.ITEM_RTE
FROM OUTLET_PRICE OP,
    OUTLET_SALES_MASTER OSM,
    OUTLET_SALES_DETAIL OSD,
    POS_ITEM PI
WHERE OSM.OUTLET_SALES_MASTER_ID = OSD.OUTLET_SALES_MASTER_ID
AND OSM.OUTLET_ID                = OSD.OUTLET_ID
AND OSD.OUTLET_PRICE_ID          = OP.OUTLET_PRICE_ID
AND PI.ITEM_ID                   = OP.ITEM_ID
/* AND OSM.OUTLET_ID                = :P2_SELECT_OUTLET
AND OSM.CONSIDERED_DTE BETWEEN :P2_FROM AND :P2_TO */
AND OSM.OUTLET_ID                LIKE NVL( :P2_SELECT_OUTLET,'%')
AND OSM.CONSIDERED_DTE BETWEEN NVL(:P2_FROM,TRUNC(SYSDATE)-1) AND NVL(:P2_TO,TRUNC(SYSDATE))
UNION ALL
SELECT OSM.OUTLET_ID,
    PI.CAT_ID,
    PI.ITEM_CDE,
    PI.ITEM_NME ITEM_NME,
    OSM.RETURN_IND,
    OSD.ITEM_QTY,
    OSD.ITEM_RTE
FROM OUTLET_PRICE OP,
    OUTLET_SALES_MASTER OSM,
    OUTLET_SALES_DETAIL OSD,
    ITEM I,
    ITEM_CATEGORY IC,
    POS_ITEM PI
WHERE OSM.OUTLET_SALES_MASTER_ID = OSD.OUTLET_SALES_MASTER_ID
AND OSM.OUTLET_ID                = OSD.OUTLET_ID
--AND OSM.OUTLET_ID                = :P2_SELECT_OUTLET
AND OSM.OUTLET_ID                LIKE NVL(:P2_SELECT_OUTLET,'%')
AND OSD.OUTLET_PRICE_ID          = OP.OUTLET_PRICE_ID
AND OP.ITEM_ID                   = I.ITEM_ID
AND I.CAT_ID                     = IC.CAT_ID
AND IC.TEMP_ITEM_ID              = PI.ITEM_ID
/* AND OSM.CONSIDERED_DTE BETWEEN :P2_FROM AND :P2_TO */
AND OSM.CONSIDERED_DTE BETWEEN NVL(:P2_FROM,TRUNC(SYSDATE)-1) AND NVL(:P2_TO,TRUNC(SYSDATE))
)SS ,
OUTLET O
WHERE SS.OUTLET_ID = O.OUTLET_ID
GROUP BY SS.OUTLET_ID,
SS.CAT_ID,
SS.ITEM_CDE,
SS.ITEM_NME,
O.OUTLET_NME
ORDER BY ITEM_NMECheers,

Browser page loading problem!

This problem has manifested itself on different occasions, however one particular very annoying thing is that I cannot get to a discussion page on a financial website (www.iii.co.uk). The page will not load with an error message that says "The connection was reset" and underneath - "The connection to the server was reset while the page was loading".
NOW - this does not occur if I boot up the computer in OSX Lion or any other earlier OS, so it must be a change to the security settings somewhere within Moutain Lion - YES?
Question is what do I have to do to allow this and other pages to load.
The problem only exists on Mountain Lion and also is not specific to Safari, it also happens iif I use Firefox.
Can anyone help? Any Apple personnel out there with an answer please??
Mike.
P.S. Please see picture.......

I think my problem was due to the Firewall security settings. I have played around with them and it now seems to be OK. So fingers crossed!
Mike.

Flash play on page load problem

helphelphelp please. i'm totally new to dreamweaver, so if
this is completely pedestrian question i apologize.
i've inserted a .swf animation file in a dreamweaver file
(insert–media–flash) that i want to play when a viewer
initially opens the site window on the finished site. i've assigned
the "onLoad" event in the "control shockwave or flash" behavior in
the bahavior panel. the file plays in the dw file - but nothing
shows up when i preview the file in a browser. just a white screen.
when i control click on the page in the brower it says the movie
didn't load.
where did i go wrong? again, i'm new to this stuff, but as
far as i can tell, i've gone thorugh all the steps my book says i
should. what am i missing?
thanks in advance-
d
dreamweaver 8, flash 8, mac os 10.4.3, capricorn

Let me make sure I understand.
1. You have a swf file, and when you browse directly to that
file, it plays
in the browser.
2. When you insert it on a page in DW (which version?), you
get a gray box
with an "F" in the middle?
3. When you select that box, and press "Play" on the Property
inspector,
you get only a white box and no other activity?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Puzzle Ice" <[email protected]> wrote in
message
news:f7ng2a$bbt$[email protected]..
> Hi Murray,
>
> I tried that. But, the swf displayed a white box even
when I clicked on
> the
> play button at the DW design mode's properties. I
verified that the swf
> has no
> problem, as I am able to launch the swf's content
directly at window's
> file
> explorer as well as Flash appln. What could be wrong,
the steps I took to
> create the swf and DW's page are from McGraw's books.
Pls adv.
>

Strange page load problem

Here is one for you. Recently a page I have been visiting often completely loads, then a moment later goes blank. Viewing the source code looks normal. I have deleted numerous files: Safari.plist, internetconfig.plist, cookies.plist, deleted the cache and icons. I just downloaded and reinstalled Safari and the problem still persists!
The really strange thing is I can view any other page on the site normally. The problem page works in Firefox, Opera and IE5 (sort of). I have no problem with any other site or pages.
FYI, the page is http://www.campusbooks.com
What am I missing?
Thanks,
John
OSX 10.3.8
Safari 1.2

I would just really like to know why this problem exists
Sorry, I wish I could give you an answer there but I can't.
Maybe it's caused by bad cache files (have you tried erasing the cache/resetting Safari?) or some enhancer application you're using (Saft, PithHelment for example).
One quick test you can do to help narrow down things is browse with Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> [+] to create a test one (and [-] to remove it if needed)

Web pages load SLOW on IPad: how to disable DNS prefetching; other ideas?

Brand new IPad 16 GB WiFi + brand new Airport Extreme in bridge mode. Comparing IPad web page load speeds with side-by-side WinXP computer running IE8. Any web site will do: take www.apple.com if you want.
Problem: IPad web pages generally load much too slowly compared to IE8 on a computer 6 inches away on the same Airport Extreme network. Maybe twice as slow at worst, occasionally not much slower, but generally pathetic and annoying. WiFi signal strength is "excellent". Airport Extreme network is working great with all my (Windows) computers and devices except the IPad.
I already switched to OpenDNS on my Airport Extreme; didn't help noticeably. I would like to try disabling DNS prefetching in Safari, but don't know how to do it on the IPad. Question #1: How do I disable DNS prefetching? Question #2: Any other suggestions for this embarrassing (to Apple) problem?

I'm experiencing a similar problem with a new iPad 2 using iOS 4.3.3 connected to the Internet via Time Machine to a DSL line. The Speedtest X HD App shows the connection speed to be fine (about .6 Mb / s). The problem is only with accessing web pages. I frequently get a "server not responding" msg. There is no problem when I connect the device via USB to an iMac, only through wifi. The iMac itself (Intel with OSX 10.6.7) periodically experiences problems (both Firefox and Safari): I have learned to solve it by cleaning out cache and fixing disk permissions periodically. I've tried cleaning out cache on the iPad, deleting cookies and erasing web history, but that doesn't seem to make any difference. The problem reminds me of an old VNC problem: you had to allocate a large amount of cache or streaming would stall. This is also happening with the iPad 2. Maybe the problem is a DNS channel issue but my impression is that it is somehow related to a memory or cache issue with the iOS device or to Airport. I've occassionally experienced similar slow page loading problems with other Airport connected devices--it varies from device to device. It seems to be a client-side software or caching problem.

IMac, sudden extremely slow webpage loading problem

Hi guys,
I had this problem all of a sudden, not sure whether it was caused by malware, my own python scripts or the 10.8.2 update. However all the other devices in my wifi network work just fine. And also my iMac is not disconnected from the internet, ping "www.google.com" is fine, and other IM apps are working properly too.
I tried different browswers (chrome, firefox, safari) since then, and all the other suggested solutions (resetting DNS, using static ip address, clear cache and etc.) None of them actually solved the problem.
My friend told me to reinstall a clean OS X, which could be a huge pain for me.
However, I accidently found out some softlinks and permissions are messed up in my superuser directories. So I did a "repair disk permission" , now the browsers are back on the horse. That actually makes sense to me.
Long story short, verify/repair disk permissions (in Utilities/disk utility) might solve your browser page loading problem! I just wanna to share with you guys if you are struggling on the same issue as I was.
Regards,
candyquicksort

Thanks for the report & sharing!

Very slow page loading, continuous loop,

Have done everything I can think of to stop this page loading problem, sometimes I can click on the red X and it will load the page but it keeps showing the blue circle continuing as if the page was still loading. Error console shows many different explanations, and it seems that most of the time it shows something to do with Google Analytics, parsing errors, undefined property.

I had a similar problem with Safari (or any browser) taking a very long time to load pages. Downloading files is fast (6 Mbit/s) so I knew my network speed was OK. I usually run wirelessly both at work and home and the problem was the same no matter where I was working. When I directly connected to an Ethernet line, browsing was fast again so I looked into the network setting for my airport connection and found I had switched the "Location" from "Automatic" to a specific DHCP setting. I don't know why but when I switched back to "Automatic" everything was fine again (super fast as before). Specifically, I just went to the "Apple" menu icon (top left and hit "Location->Automatic". That's all.

Have been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's and the same if I click a link on the page.

been running version 4 for a week without problems. Today, downloaded MS live security update, and have had problems since. when I click on a favorite site, it takes 20 to 40 seconds before the page load's.'''bold text'''

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Safari only loads pages if I refresh each time. What is going on? Loading problem

Currently I had to refresh every single page to post this question.
My Safari 5.1.2 is not loading pages correctly. I click on a link or enter in a url to go to any website and Safari goes and tries to obtain waht I asked for, but stops loading after 60-80% is done (based on loading items on bottom info bar). I wait for another 120 seconds, and still nothing.
I hit the stop loading button and press refresh and the page loads automatically perfect. This is frustrating to use right now, and I do not have any other browsers to try anything else on. Why am I having this problem?

Delete the cache lately?
Quit Safari.
Go to ~/Library/Caches/com.apple.Safari.
Move the Cache.db from the com.apple.Safari folder file to the Trash.
Relaunch Safari.
If that didn't help, from the Safari menu bar click Safari > Reset Safari
Select the top 5 boxes, click Reset.
BTW, if Safari isn't working at all, having a backup browser installed can help. If you need to re download Safari or support files you can.
Google Chrome
Mozilla Firefox Web Browser

W550s: slow web page loading - video problem?

My system:Thinkpad W550s with the 2880x1620 px Display.CPU: i7 - 5500URAM: 8 GBSystem: Win 7 64 bitDrives: system 256GB m.2 SSD This problem seems to be Lenovo video display, not the web browser or the internet connection: I see the same slugish page loading with Chrome and Firefox; I see the same problem with WiFi or wired ethernet. No other computers at my house have this problem. Specifically, I display Zillow in web browser. Choose a search option that displays hundreds of homes within the map. Zoom in or zoom out. Zillow redraws the entire map, and it is very slow on my W550s (sometimes 2 seconds or more). Other computers will refresh in a few blinks of the eye. I have not used the computer enough to say if I'm also seeing video display problems. There is a slow video on W550s topic in the forum, too.. I haven't yet tried some of the (unsuccssful) steps recommended there.

Occasionally I see it reach 100% when doing nothing but browsing! So what does that mean to you? The observed sluggishness seems very real, but I have a hard time quantifying it. My desktop system (older AMD CPU, 8 GB RAM, HD, not SSD) is definitely snappier. The graphics card on the desktop system is nothing special - some nVidia $50 card. Again, in the not quantifiable category, a friend recently brought an older Dell XPS laptop to my home that I had gifted to her. It is from 2007, runs Windows Vista (yikes!) and only has 4 GB RAM, yet it definitely felt faster with Firefox. It even seemed to load Firefox and IE quicker! This is really disheartening. I should load Adobe Lightroom on it and see how that runs.

Page Load Problem

Similar Messages

Maybe you are looking for