Page names after the domain

When ever someone goes to my web site they arrive at the home (welcome) page, from there they click the relevant links to various pages. The address bar remains the same throughout, there is no /blah blah as there is on some other sites.
How do i create this scenario, so that with the right url someone could go straight to the intended page and not to the welcome page to start with.
Thank you
Mike

<snip> Are you forwarding a Domain name from a registrar to your .Mac url, using masked forwarding?
Thanks for that, but as a beginner that sort of stuff i am not familiar with.
What i can say is that i do not use my .mac (it expired) so as for masked forwarding i again do not know.
<snip> disable the masking and the specific page url should show in the browser with each page
From your final sentence I am pretty sure you get what i mean about the Specific page urls. (I just didn't quite know how to explain that in the first place)
If it is of any use my procedure would be:
1. make a page in iWeb
2. save that page to a folder on my mac
3. Upload that folder via ftp (?) using Fetch to my webspace hosted by my ISP.
from there it is sorted.
Any more help please
Mike

Similar Messages

Can I stop iWeb from putting a page name at the top?

I don't want page names across the top in iWeb. I have a list of hyperlinked icons on the side for that.
Can anyone tell me how to stop iWeb from putting the page name on the page?
Thanks.

The script is for the text in the browser title bar.
The title is taken from the large textbox at the top of each webpage.
If that box is missing or empty, iWeb uses a next textbox for the title.
If that is missing too, the pagename is used for the title.
If you want the title in the titlebar but not the large textbox on your page, select the textbox, do Cm-T and drag the font-size slider to the bottom.
Then click the color next to the T-icon and drag that opacity slider to the left (0).
Then resize the textbox to it minimun size and drag it out of view. And don't forget you did.
But I think the OP means the navigation links at the top.

Name Error: The domain name does not exist

Hi,
I get this error when I try to create a view inside a web dynpro from se80 transaction
" Name Error: The domain name does not exist. "
Can anyone help me to solve this error ?
Thanks !!

Hi,
did you carry out the necessary <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">configuration</a> in your system? Note especially the need for fully qualified domain names (FQDN): <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm">FQDN</a>
Regards, Heidi

"Conversion of Source System names after the transport" : O

Experts:
Environment : BI 7.0 and SP 12
<b>Tranports related to transformation rules are failing with inactive status...</b>
Further investigation on this, I have noticed that in our QA system, where "Conversion of Source System names after the transport" : O screen, we have columns
Original Source System, Target Source System, 7.0, Description(I guess, since no name is found)
Everything looks fine to me with reference to actual techinical names of source/target system...
My question there is a check box on column "7.0", which is UNCHECKED. Is this correct?
My understanding is that, this check box needs to be CHECKED, since this is related " Only Valid for RSDS, TRFN and DTPA Objects ". Is this correct?
If yes, Can I check this box in QA system, save and retransport my requests. If so, what happens to standard BW objects i.e., transfer ruels, update rules etc...
OR do i need to create another entry with same source/target system and check the 7.0 box.
OR do i need to create 3 entries with same source/target system and check 7.0 box for each entry i.e., RSDS, TRFN, DTPA.
Finally, please advise the exact steps that need to be taken here...pros and cons
Your inputs will be of great help....
Thanks,
BI
Message was edited by:
B I

Hi,
Yes you need to check the checkbox as it is related to Data sources and transformation and DTPs. you can mark the check box if your client is modifiable, if not you need to transport the setting from DEV. Go to
SPRO > Business Intelligence>Transport Settings--> Change Source system name after transport.
you also need to maintain the Source system IDs .
Hope it helps.

How do you reactivate this phone in another family member name after the original owner now deceased

How do you reactivate this phone Verizon Droid Maxx in another family member name after the original owner now deceased

To switch it to another number, you need to activate another phone on the number you no longer need (or have Verizon cancel it for the deceased member). Once that line is no longer active, you can activate the phone on another number - have Verizon CS at a store help you, or follow the steps on verizonwireless.com from the account of the person you do want it to be activated for.

Is possible to get the page name from the _pageid

Is possible to get the page name from the _pageid displayed in the url?
It must be stored in a portal oracle table does anyone know which ones or whether there is a api to translate the pageid.
Thanks in advance.

You have you execute this query, using both the numbers included in the parameter pageid:
select display_name from portal.wwsbr_all_folders
where caid = :first_number
and id = :second_number

Suddenly, I can't print any web page. After the print command, it wants to save it as a XPS file.

suddenly I can't print any web page. After the print command it wants me to save as an XPS file and I can't get past that.
== This happened ==
Every time Firefox opened
== few weeks ago

I found that Firefox/XPS had deleted all printer driver setups except for the XPS connection. I had to reinstall my printer connection in order to have that selection present in the printer dialogue box.

Imessage only displays the phone number instead of the name after the last update. any idea how to fix it?

imessage only displays the phone number instead of the name after the last update. any idea how to fix it? All messages had the names displaying correctly before the last update.

From the menu bar, select
 ▹ System Preferences... ▹ Language & Region
From the Region menu in the window, select one of the preset regions. If one is already selected, choose a different one, then change it back. Close the preference pane and test.

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

Changing DNS zone names after the fact

Over 3 months ago we started setting up our server network. After discussions with administration it was determined (at the time) that we would use and register a domain name with a .net extension. So we set up a primary server with this extension and had it registered with our ISP. We subsequently added 7 other servers to the mix and as they were installed they grabbed their names from the DNS zone we had setup *.net in our DNS zone in our primary nameserver system. It was all well the tests worked we had it all going and are moving our 130 machines (including about 60 users) over next few months (and have moved about 10 users and other machines so far.
My question is this. Back in beginning a *.org was the other option but we had problems with it and our ISP (could have been some error on our part) so we went with *.net for our domain and got that registered. Now all of a sudden as our management is wanting to move the organizational website (we are not doing that) to another service that service is tying to convince them we should have not used *.net but *.org.
The person in charge of us is strongly asking if we can go back and setup with *.org but as I understand it I cannot go in and delete my *.net DNS zone and then rename all the servers with a .org extension but as we understand it from lynda.com and other sources it appears that we probably would have to go back and reset all the machines back up by reinstalling them after I changed the first primary nameserver. And then register the new name and wait for it to propagate?
Are we wrong? Can we just go in and turn off the DNS in server admin and then change the zone name(s) to *.org and the host names of each server from *.net to *.org and restart DNS and find all to be well? As much as we can tell it appears that we would have to restart from scratch as all the documents and lynda.com imply we should have had our final domain name set and registered before we started to install and setup the primary and secondary servers?
I see some examples where it is said to make such changes something needs to be done with ipconfig and not the GUI in server admin. But again I am not sure that this will work with our primary nameserver and the 7 servers under it?
Any feedback or help about this would be appreciated. It is our preference to stay with *.net and not have to do major work as we are starting user and network migration to the new servers and hate to have have such a major setback just because one person and the web design service they want to use does not like *.net. to us it appears the horse is long out of the barn and when this was approved last fall we have gone to far to easily go back. But if it is easier to go back than we think then we are willing to try to change.
Thanks
russ

foilpan wrote:
first, what are these servers doing? are they all web servers, OD masters, simple file servers? depending on their roles, changing their names can be more or less of a problem.
The first server we set (the name server) does incoming mail, is the DNS server for local net and such. Then there is the outgoing mail server (one of 7) a web server (another of 7) and then the rest are mostly file servers for our setup.
second, work out that political stuff before making any changes. if everything's working fine as is, make a strong case for leaving things alone. if possible, estimate support costs for changing everything and troubleshooting, then see if management can justify it.
Sort of my feeling. We thought we had it all worked out but then they decided to abandon the old web site (managed by someone else but associated with the old mail/network somewhat) and have a new Web design company do it and this company complained about us having chose a .net for what reason I do not know so the administrator somehow was persuaded and had no idea of the can of worms she had opened up by changing her mind. If it is too much of a hassle and it appears so in terms of delays to move rest of organization over then I hope we can convince them.
are all these servers public facing or behind a firewall?
They are behind a firewall on a high speed cable modem ISP service (firewall is local ASTARO machine).
also, why not setup another dns zone for .org and point to the same hosts? that would allow you to use either .net or .org, for the most part. again, that depends on what these servers are doing.
We suggested that but the administrator did not like having two names we have a lot of users (volunteers and such) who are not really too savvy (the nature of free and partime help I guess) and she feels they will be confused by two extensions for network, mail and web. It sure does not bother me (I have about 8 email addresses for example now .
post more details without the political background and what the end result should be, and we'll be able to add more here.
Ok basically we want to know with the following:
1) main nameserver (the first server that provides the DNS zone for local *.net and serves the incoming mail)
2) A second outgoing SMTP server to split load and do outgoing work...
3) A third webserver doing all the web services (blog, wicki, and such)
4) 4 file servers that are going to provide a local file server for our 4 main departments
5) A final test server we are testing other things with-- so total of 8 servers.
6) 8 Users out of 60 now on the network with their personal desktops or laptop machines, and a few printers and other devices all on new network.
There are a total of 130 macs and pc's in our organization that will all eventually be on this new network with the above.
Basically we are wondering if the main (first) DNS and incoming mail sever, and the 7 other (web, SMTP out, and file server machines) will have to be set back up from reinstall if we are to make the change from the *.net zone we have now to a *.org one?
Any other details that would be of help?
Thanks
Russ
2) second

How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

Does this happen with each bookmark?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Keeping iWeb album pages intact after transferring domains

My company needs to transfer iWeb sites to other computers so that multiple users can edit the sites. We know how to transfer the domains, but when the sites are opened on the other computers, the photo album pages are missing. This is obviously because those photos don't exist in the new computer's iPhoto.
My question is: Is there a way to save photo album pages to iWeb so that when the iWeb domains are transferred the photos stay intact? I don't want us to have to send photos all over the place where the new users must upload them into their own iPhoto, etc.

iWeb is a "single user" application and each user account has their own special folder and "package" file that is used by iWeb.
Multiple user accounts to one of these "packages" is very impractical.

Changing the document page size after the fact.

Does anyone know of a way to change the page size globally after the fact?
I have sent a 200 page book created with Pages '08 to my printer. The work has a full bleed watermark in the background on a custom 7" X 11" document. I've just been informed that he needs to increase the paper size to 7.25 X 11.25 and have me increase the watermark so it can be trimmed down.
Is there a way to change all 200 pages or do I need to set-up a new document and do a whole lot of cut and paste?
Thanks in advance everyone.

Your problem is that the change is not proportional.
However it is not a great change, 6.66% at most. If you don't mind a subtle change in height vs width, just create a pdf of the entire document and tell the printer to change the size on going to plate.
Alternatively you can simply scale it up the 6.66% which will make the height about 0.5" too high and trim away the excess.
The other way is only scale it up 2.27% which gives you the right height but leaves you with 0.1" less width.
Or you can go in between and have a compromise for both directions by scaling up 4.4%.
It depends if you have white margins in either direction that can take up the slack and also how much bleed you have on the watermark. You only need 1/8" to cover any trimming errors.
As this appears to be quite a long book and would need to be imposed up in signatures, I would imagine the printer must have the necessary imposition software to allow for creep etc, which should also allow for non-symmetrical scaling.
Don't you Americans ever feel at moments like these that you wish you weren't the last people in the world to not use metrics and rational paper sizes?

How to refer to a column name in the domain constraint

When we specify a check constraint (for SQL Server) within a domain we need to enter some syntax expression, for example
len(phone) > 7
Later the modeller will put exactly this expression into SQL code. But this would be wrong as constraint should refer to a column name in the table (which would not be "phone").
So how to make Data modeler to put a real column name within domain constraint?

Thank you very much, it really works!
However I would like to know where I can get documentation on such internal variables (like %COLUMN%)? I find it difficult to locate this information in the Help file attached to a modeler (it seems that it only describes UI screens).

Page names after the domain

Similar Messages

Maybe you are looking for