Page not found when trying to go to Calling Features

I am logged into https://www36.verizon.com/fiosvoice/members/default.aspx and when I select "Calling Features" on the left side of the page I get the Verizon Fios Digital Voice "Page Not Found" page.
I am using Firefox 3.5.9.
Is anyone else having this problem?
Am I using the correct URL for Digital Voice?

Same with me and my "Do Not Disturb" feature has been turned on without my knowledge, and now I can't turn it off.
I was able to get through to a rep for FIOS (on the phone with them right now) and they are trying to get a tech to disable that feature.

Similar Messages

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

Why HTTP 404 Page not Found when trying to Backup Configuration?

Good day:
I bought this RV082 VPN Router. After configuring it, I tried to save its configuration using the System Management's Backup Utility. When I set everything up and ready to proceed, as I click on the Backup Configuration button, I get this Page Not Found error.
After several additional retries, and cold startup of my laptop, I still get this.
Then I wondered, "Why don't I try to upgrade the firmware instead?".
Guess what: I get the same page not found error.
Can anyone tell why is this? Using Windows 7 Pro 32-bit.
Thanks in advance!
Javier.
P.S. I have replied to another thread about not getting connected with Quick VPN to the RV082, which is another painful trouble I've got with it.

Hi Rybak,
Thanks for your reply.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TFS - Access Level - page not found when trying to add user

When I'm trying to modify some group under Limited Access Level I cannot do that because of the following error:
Page not found.
wrapErrorCallback/</<@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:175:37
endRequest@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:114:17
wrapErrorCallback/<@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:141:1
jQuery.Callbacks/fire@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:984:10
jQuery.Callbacks/self.fireWith@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:1094:7
done@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:7815:1
.send/callback@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:8528:8
Any ideas why it happens?
Environment: Windows Server 2012 with latest updates, TFS 2013.4, user which is used for TFS is a member of local administrators group.

Hi Rybak,
Thanks for your reply.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Page Not Found when trying to find latest BIOS version

Hi,
I regularly get a blue screen with the following error code: 0x0000009c.
According to what I've found online updating my BIOS might solve this.
However, when trying to download the latest BIOS version I'm sent to a 'Page Not Found'-page after selecting my product.
Any advice on how I can find the latest available BIOS update for my product?
My product:
HP Pavilion Elite HPE-110be Desktop pc (Model: WC694AA)
My bios:
5.15 25/06/2010
OS:
Windows 7 Home Premium 64-bit
Thanks in advance,
Steven

Hello @StevenHbe,
You are running the most current BIOS for your computer so at this point the only option you would have is to restore defaults on your BIOS. If you still require help with this please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

404 not found when trying to make outbound calls

Hi.
Just got skype for business, incoming calls working fine but cannot get outbound to work.
Any ideas?
    Call-ID: YzUwYWZiNDRlMTc0NzhlNDlmYjExMmRjNWFmZDE3M2Q.
    CSeq: 1 INVITE
    Session-Expires: 1800
    Accept: application/sdp, message/sipfrag
    Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, NOTIFY, INFO, REFER, PRACK
    Content-Type: application/sdp
    Supported: replaces, histinfo, 100rel, timer
    User-Agent: TeleVoice Trio Enterprise 3.2 TE 3.2.79
    History-Info: <s
    v=0
    o=- ****************330 1 IN IP4 192.168.0.191
    s=-
    c=IN IP4
    t=0 0
    m=audio 53018 RTP/AVP 8 101 0
    a=rtpmap:8 pcma/8000
    a=rtpmap:101 telephone-event/8000
    a=rtpmap:0 pcmu/8000
    sigcomp id=
Resiprocate: (level=7)
    Adding message to tx buffer to: [ V4 UDP target domain= mFlowKey=0 ]
Resiprocate: (level=7)
    incoming from: [ V4 UDP target domain=unspecified mFlowKey=352 ]
Resiprocate: (level=
    CSeq: 1 INVITE
    Content-Length: 0
Resiprocate: (level=7)
    incoming from: [ V4 UDP target domain=unspecified mFlowKey=352 ]
Resiprocate: (level=
    CSeq: 1 INVITE
    Content-Length: 0
[edited for privacy]

can anyone over at Skype help, there seems to be no online chat support anymore, and I am a paying customer, very dissapointing!
I have Skype Connect (skype sip) setup for incoming calls and this has been working well for some time, but now i want to call out to skype users using the same account and I get both 407 and 404 errors, a redacted trace copied below:
|Time     | xx.xxx.xx.xxx                         |
|         |                   | 63.209.144.201    |
|0.000    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
|         |(5080)   ------------------> (5060)   |
|0.041    |         100 Trying|                   |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.184    |         407 Proxy Authentication Required          |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.184    |         ACK       |                   |SIP Request
|         |(5080)   ------------------> (5060)   |
|0.185    |         INVITE SDP (g711U g711A telephone-eventRTPType...1 CN)          |SIP From: "" <sip:[email protected] To:<sip:[email protected]
|         |(5080)   ------------------> (5060)   |
|0.225    |         100 Trying|                   |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.857    |         404 Not Found                 |SIP Status
|         |(5080)   <------------------ (5060)   |
|0.857    |         ACK       |                   |SIP Request
|         |(5080)   ------------------> (5060)   |
the (redacted) gateway config in freeswitch is:
<include>
        <gateway name="skype">
        <param name="username" value="9xxxxxxxxxxxxx"/>
        <param name="realm" value="sip.skype.com"/>
         <param name="from-user" value="9xxxxxxxxxxxxx"/>
        <param name="from-domain" value="sip.skype.com"/>
        <param name="password" value="XXXXXXXXXXXXXX"/>
         <param name="extension" value="9xxxxxxxxxxxxx"/>
        <param name="proxy" value="sip.skype.com"/>
        
        <param name="register" value="true"/>

        <param name="register-transport" value="udp"/>

        <param name="retry-seconds" value="30"/>
        <param name="caller-id-in-from" value="false"/>
        <param name="contact-params" value="[email protected]"/>
        <param name="context" value="public"/>
      </gateway>
</include>
Can someone over at skype support assist? or anyone else who has experience with this?
The 404 appears to be the more serious error but not sure if the 407 is causing the 404 and needs to be cleared up first.
Thanks!

404 Not Found When Trying to Make Outside Call on EX90/Movi/Etc

All internal calls work just fine, but when we try to call an outside IP/hostname I keep getting 404 Not Found. All outbound ports are open on our firewall and the VCS is setup in a DMZ. Here are the call details:
Call information
State
Connection Failed
Start time
2012-02-15 12:09:24
Duration
0 seconds
Tag
Serial number
Bandwidth
Requested
0 kbps
Allocated
0 kbps
Leg 1
Bandwidth node
Default Zone
Source alias 1
sip:<C40 hostname> (Url)
Target alias 1
sip:208.66.132.62 (Url)
Protocol
SIP
Address
<C40 IP>:5061
Transport
TLS
Reason
Not found
Cause
404
Anyone have any ideas?

Basically we have the following:
EX90 = at a remote site
C40 = at our corporate office
Movi clients = at other remote sites
VCS = at our corporate office
The VCS has the Expressway option. I'm really new to this so the top of the web interface says "Cisco TelePresence Video Communications Server Start Pack Express". Options:
0 Non Traversal Calls, 5 Traversal Calls, 50 Registrations, 900 TURN Relays, Expressway, Encryption, FindMe, Starter Pack.
The endpoint is registered on the VCS with SIP. Not using H323. Basically the way you have to contact the EX90 from let's say the Movi client is via @.
The Dial Plan configuration shows Indirect, should it be Direct?
I'm not sure if I have VCS Control and if I do not sure where that setting is and where would that rule be set? On our Cisco ASA? The thing is, our network engineer did a packet capture and when we did a call nothing even hit it. So it's like it's stopping dead at the VCS.
We were able to call out on the EX90 before the VCS was ever put in place, so it must be something in the VCS config.

Inside a normally loaded webpage I get Yahoo! 404 -Page not found when trying opening linked articles inside the site. Really annying

search redirected to http://search.yahoo.com/404handler?

Why are you publishing to a folder? You only need to do this if you are uploading directly to the domain webspace and you need an ftp client to do this such as Cyberduck.
CNAME is only used if you are publishing the site to a MobileMe account and you are forwarding the domain to your MMe account?
What is it that you are doing?
If using CNAME, then you need to go to your MMe account and enter the domain name under the personal section, enter personal domain. Then publish your site and then go to your domain name registrar and go to the DNS settings and set the CNAME up to forward to web.me.com.
If you are using CNAME forwarding, then from within iWeb you need to click on Publish All to MobileMe and NOT TO A FOLDER. The folder option is ONLY if you are uploading directly with ftp to your domain space.

TS3798 I cant connect to my wifi! it has a message that says ACCESS ERROR: Page not found when trying to obtain /library/test/success.html I HATE IT!

please please help
as i really need my phone for the internet.
Thanks

You put the machine name as the host name. I would put the (internal) network address of the laptop there and try again - and make sure that Oracle is actually listening on your internal network address in stead of only the localhost. Or are you running the java application on the same laptop? Then you can simply use 'localhost' as the host name.

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

HT1923 did anyone get the apple application support was not found when trying to instal?

I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc.

Installed itunes update 10.5.0.142 and now get the error message "Disc Burner or Software Not Found" when trying to burn playlist to disc. Windows 7

Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why do I keep getting actionlist not found when trying to update to version 11.6.602.180?

WHy do I keep getting actionlist not found when trying to update to update to version 11.6.602.180?

This problem and others are outlined in this help document. In addition, please try installing from the appropriate stand alone Windows installers located here:
Installation Problems - Flash Player - Windows

It says "request resource not found" when trying to restore my iphone 4s

it says "request resource not found" when trying to restore my iphone 4s

This article is for iPhones that are unable to be restored.
You may have to try recovery mode (as described below) more than once.
http://support.apple.com/kb/HT1808

I keep getting result code -43 not found when trying to load certain instruments. Any idea why

I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Page not found when trying to go to Calling Features

Similar Messages

Maybe you are looking for