Page not navigating into next page

HI,
I have two screens, where in the First screen if you give a Partner number then it should take you to the next screen, and show relevant detaisl ina table control.
But this is not happening,, where are the settings to be checked...
Any reason.....
Gautam

HI,
you should allow the user to navigate to the next screen.
best regards
Tobias

Similar Messages

Internal Table data is not overflowing into Next Page - Adobeforms

Hi,
     I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
     Here am using Header only on first page & Table will follows...
Regards,
PraVeen..
Edited by: praveenreddys on Feb 15, 2012 10:51 PM

Hi praveenreddys ,
I had the same requirement, I did as follows:
LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
1. table tab: select the check box allow page breaks within content.
2. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
3. row tab: select the check box allow page breaks within content.
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
select the check boxes: Include header row in initial page
                                        include header row in subsequent pages
Binding tab property:
5.select check box: Repeat row for each data item
LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
6. Row tab: DON'T select the chek box allow page breaks with in content
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
Binding tab property:
5.select check box: Repeat row for each data item
Then test..it would work for you...ALL THE BEST!!!
If this helps please reward points.
Reards,
Naresh.

Report Viewer 2015 not navigating to next page

I am using a report viewer 2015 in an ASP.NET application with credentials passed using IReportServerConnection2.
But after clicking next page on report viewer toolbar, 2nd page of report is not shown.
The issue is reproducible with
ASP.NET application installed on Windows Server 2008 R2 but not when installed on Windows 8.1.
Please help its urgent.

Hi Vaibhav,
Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
protected
void
Application_Error(object
sender,
EventArgs
e)
in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
Thanks,
Wynn

Window does not fit into page

Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
Shanthi

Hi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan

Cannot log in to Nationwide internet banking in Firefox. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

Question
Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

How can I fix this? Text and images collide, space and margins are not taking into account. The whole page layout is a mess.

Hi,
Whatever I design in muse is totally different from what the preview in the browser shows. Texts crashed with images, and spaces and margins are not taken into account,
Is there a way to fix this? Is it a bug?
Thanks.

Hi Federico,
Please take a look at this forum post for a similar discussion : Aligning multiple HTML objects on one page?
Regards,
Aish

Page items do not go into Excel when exporting

We are using 10.1.2 viewer and plus (and I have the desktop version available). I have tried exporting a worksheet with page items using all 3 of the above and the page items will not go into excel. Is there any trick to get this to work? I thought that it used to work in older versions?
thanks
Angie

Did you try the Export to Excel as Pivot Table option? That would create a base sheet with all the page items flattened out, a static sheet that looks like the worksheet at the time of the export, and an Excel Pivot Table where you can page through the page items.
thanks
Abhinav
Oracle Business Intelligence Product Management
BI - http://www.oracle.com/bi
BI - http://www.oracle.com/technology/bi
Blog - http://blogs.oracle.com/
BI Blog - http://oraclebi.blogspot.com/

Popup not INSERTing into table and not refreshing called page ...

Greetings
Environment: APEX 3.1.1.00.09 on AIX 5.3 in 10gR2
I have read many of the threads concerning my issue and I feel I am getting close to the answer but somehow have combined too many of the suggestions and am tripping over my own code.
Please look at my sample application on apex.oracle.com:
Workspace: galway
User: gwicke
Password: gwicke
Please start with Page3, select any Agency and then click 'Add New Contract'.
There is currently a BOLD label 'Add New Builder' that is a link that should open a popup window. Type any name into the field and click 'Create Builder'. This should INSERT the row into the builder table, close the popup, assign the new builder name to the calling page item 'Builder Name' and populate the screen item.
In it's current state, the application will open the popup window, allow entry and close upon clicking the 'Create Builder' button. However the new builder is NOT inserted into the table and the calling page item is not populated.
By looking at the Page Items and Session State I can see the correct values assigned to the 'Pn_BULDER_NAME' items on both the popup page (4) and the calling page (2) but the value does not appear on the screen.
I've read where there's really two parallel universes, no sorry, two versions of the screen items, one in Session State and one that is displayed in the browser and there are steps to take to be sure the one displayed is updated from Session State as I would like in this case.
I've entered Javascript code in the Page4 - header to define the 'passBack2()' function and code in the 'Optional URL Redirect' section of the 'Add Builder' button to hopefully execute the ARP for the INSERT, assign the Page2 items and close the popup. It doesn't quite get all that done.
Any helpp is greatly appreciated. Thanks to Denes for most of the code suggestions I've followed.
-gary

Hi Gary,
I think that there's a very simple solution to this - didn't really spot it last night.
Firstly, yes, you could use a "button" to handle the call for the popup - just make sure that the button is a URL type "button" that is actually an A tag with the call in the URL target setting. Alternatively, you could take you existing A tag and use the same class attribute for one of your buttons as this should make it look like a button.
More importantly, though, I think that we could do it as:
1 - On your page 2 popup call, clear that cache for page 4 (the popup page) - I have already done this in your app by updating the url
2 - On the popup page, allow the user to enter in their desired P4_BUILDER_NAME value (not sure if you want to do something to make this unique?)
3 - Let the user click the Create button on the popup. This will submit the page, which will get your P4_BUILDER_RANK (the pk) value and insert a new record into the table (you could consider creating a sequence and a trigger to handle the creation of a new PK value?).
4 - Assuming the P4_BUILDER_RANK then exists (it wouldn't if there was an error somewhere), then conditionally display a region that had a piece of javascript that submits page 2 and then closes itself - we don't need to pass anything back to page 2 (see below)
5 - As the P4_BUILDER_NAME and P4_BUILDER_RANK exist in the session, when page 2 is being reloaded, (A) the select list would be updated with the new Builder (still not sure why all my entries appeared at the bottom instead of in alpha order??) and (B) both P2_BUILDER_NAME and P2_BUILDER_RANK can have Post Calculation Computations set (NVL(:P4_BUILDER_NAME,:P2_BUILDER_NAME) and NVL(:P4_BUILDER_RANK, :P2_BUILDER_RANK) respectively) - the effect of this is, if there are values stored in the P4 page items, we use them, otherwise we use whatever values were in the P2 page items
6 - Finally, to stop (5) happening in all page 2 loads, you would need to clear the cache for page 4 in as many places as possible - eg, branches to page 2 or buttons on page 2
The reason we can't pass values back to page 2 is that one of the items is a select list. The value we want to select won't appear on the select list until the page has been submitted. So, we can't set the value and submit because the value isn't there. We can't submit and set the value because javascript wouldn't know when the page has been updated (or, at least, you would have to put some independant mechanism in place to identify this, which may become complicated).
So, simply put, as long as we know that if the values are in the session, we can use Post Calculation Computations to set our fields to these values. The only thing to bear in mind is that we need to ensure that these session values only exist when we need them - hence clearing the cache. This principle should work for any type of field - but, as you have no doubt seen, simple text fields can be updated by the popup directly as the field should accept any value we give it.
My only other recommendation would be to completely remove the MRU processes from the page as these are not required (they just confuse the issue) and you could make your PK fetch and record insert into a single process - just to keep things neat and tidy, you understand!
When I finished with your app last night, I did leave it so that javascript would create a new option on the select list and then set the value. But the above methodology seems to be a lot simpler.
Andy

Table row does not flow to next page

Hi,
I am using deep structure table in adobe form but the content is not flowing to next page.
I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked, still the table row does not flow to next page.
Regards,
Kimaya

Hi Kimaya,
Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
Thanks

When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

Does it show up in your camera roll?

NPE error when navigating to next page based on lov selection

hi there am having problem whn navigating to next page based on lov selection,when i select value and click the button to navigate am geting NPE ERROR
{code}
<DCUtil> <findSpelObject> [598] DCUtil, returning:oracle.jbo.uicli.binding.JUFormBinding, for uam_view_pageDefs_SelectOrgPageDef_WEB_INF_Updatetaskflow_definition_xml_Updatetaskflow_definition
<DCIteratorBinding> <releaseDataInternal> [599] Releasing iterator binding:variables
<DCIteratorBinding> <releaseDataInternal> [600] Releasing iterator binding:UpdUamOrganisationLovIterator
<DCIteratorBinding> <releaseDataInternal> [601] Releasing iterator binding:UpdUamOrganisation1Iterator
<DCIteratorBinding> <releaseDataInternal> [602] Releasing iterator binding:UamUserdetailsViewVo1Iterator
<XmlErrorHandler> <handleError> ADF_FACES-60096:Server Exception during PPR, #1
javax.servlet.ServletException: java.lang.NullPointerException
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
 at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
 at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
 at java.security.AccessController.doPrivileged(Native Method)
 at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
 at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
 at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
 at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
 at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.faces.el.EvaluationException: java.lang.NullPointerException
 at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
 at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
 at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
 at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
 ... 38 more
Caused by: java.lang.NullPointerException
 at showSelectedOrg(OrgDetails.java:2455)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.sun.el.parser.AstValue.invoke(Unknown Source)
 at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
 at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
 ... 45 more
THIS IS THE LINE AM GETING THE ERROR
method.getParamsMap().put("rowKey", newVal);
<af:selectOneChoice value="#{bindings.Orgid1.inputValue}"
 required="true"
 id="soc1" autoSubmit="true" valuePassThru="true"
 contentStyle="width:145px">
 <f:selectItems value="#{bindings.Organisationid.items}" id="si1"/>
 </af:selectOneChoice>
<af:commandButton text="UpdateOrganisation"
 id="cb1"
 action="#{pageFlowScope.addMember.showSelectedOrg}"/>
public String showSelectedOrg() {
/* if(getorgids() == null ||getorgids().equals(null)){
JSFUtils.addFacesErrorMessage("Select Atleast One Organisation");
JSFUtils.showFacesErrorMessage("Select Atleast One Organisation");
BindingContext lBindingContext = BindingContext.getCurrent();
BindingContainer bindings = lBindingContext.getCurrentBindingsEntry();
// get the list binding for the Organisation lov
JUCtrlListBinding list = (JUCtrlListBinding)bindings.get("Organisationid");
// get the selected index from the list which is stored in the Orgidd1 attribute
AttributeBinding attr = (AttributeBinding)bindings.getControlBinding("Orgid1");
Integer selid = (Integer)attr.getInputValue();
// load the listdata
Object row = list.getDisplayData();
// get the selected row from the list
Row lFromList = (Row)list.getValueFromList(selid);
// from the row we get the PK the orgnasationId
Object lAttribute = lFromList.getAttribute("Organisationid");
Object orgname = lFromList.getAttribute("Organisationname");
Number newVal = (Number)lAttribute;
String neworg = (String)orgname;
_logger.info("Information: selected Organisation = " + newVal);
System.out.println("neworg " + newVal);
System.out.println("testorg " + neworg);
selectedState = neworg;
// get the MethodAction for setCurrentRowWithKeyValue
OperationBinding method = bindings.getOperationBinding("setCurrentRowWithKeyValue");
// set hte needed parameter as the organisation id
method.getParamsMap().put("rowKey", newVal);
method.execute();
// after execution check for errors
List errors = method.getErrors();
Exception ex = (Exception)errors.get(0);
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, ex.getMessage(), "Select Atleast One Organisationtest");
FacesContext.getCurrentInstance().addMessage(null, msg);
// keep on page in case of an error
// navigate to the next page
return "show";
{code}
am in jdeveloper 11.1.1.6.0

adf009, please read the post I posted the link to in my previous replay. The old code format tag don't work in the new forum!
Still the same error. The stack trace still points to it, you only need to read it carefulle
javax.faces.el.EvaluationException: java.lang.NullPointerException
 at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
Caused by: java.lang.NullPointerException
 OrgDetails.showSelectedOrg(OrgDetails.java:2456)
The origin is
method.execute();
and the real reason is
MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51);
What does it tell you?
Timo

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

BIP Report PDF layout not extending to next page

Hi,
I am using BI Publisher Report.
I need to show the data in columns. Ex: Plan Name. Each plan name should be shown in separate column. While doing so, when the paper size is completed, data is not printing in next page.
I need to merge the cells above the Plan Name along with the heading on the first column. But merging is not happening.
But the merging is not happening as expected. Merging is happening as below
Is there any thing which I am missing. Could any one help me in this regard.
Thanks!
Regards,
Kishore Nerella

Hi Vaibhav,
Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
protected
void
Application_Error(object
sender,
EventArgs
e)
in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
Thanks,
Wynn

Data is not inserted into database through OA-Page

Hi all,
I developed a region to store supplier additional information.In that region i'm able to enter data into fields and data is sucessfully stored into custom table.But when I embedded that region with Supplier-Address Book page(in R12) page through Personalization i'm facing a problem with inserting data into custom table.i.e After I entered data the data is not goes to custom table and the fields which are filled by data are also not cleared.
Could anyone please help me..
Thanks in Advance
Edited by: user9970067 on Oct 13, 2009 12:15 PM

Hi Nilesh,
First I just created region in Jdeveloper and ran it from jdeveloper then it's working fine.After this I added custom region in seeded xml page file and then ran page from Jdeveloper,then the data is not saved into custom table.
Steps I followed:
1. I created an EO(oracle/apps/pos/supplier/server)
2.Created VO based on above EO(oracle/apps/pos/supplier/server)
3.Created AM based on VO(oracle/apps/pos/supplier/server)
4.Created one Region based on this view instance.(oracle/apps/pos/supplier/webui)
5.Created one CO for the above region.( compiled and ran this standalone region then it's working fine)
6.Now I embedded the above region with the page which is located in oracle/apps/fnd/ framework/toolbox/tutorial/webui/SupplierSearchPG.xml through personalization.
When I entered into customized region the "save " button in my region is not highlighted.only "GO" button in SupplierSearch is highlighted.when I click on "save" button in my custom region it's not calling the controller.
could you please give me any solution for this.
Thanks in Advance.

SharePoint 2013---How to convert current left Navigation into tree view

Hi All,
I want to convert current left navigation into tree view in SharePoint 2013. When we click on Modify Navigation and set headers and links; I need that should be convert into tree view. All headers should be expandable to thier links.
I just want tree view on navigation headers and links. not for all site and subsites which we can enabled from site settings --> Modify All Site settings --> Tree view
Please help me Master Page editing on Navigation Generation.. Thanks in advance!
Regards,
Anna

Hi Anna,
If you want to replace the Quick Launch part with the custom treeview web part in master page, you can comment out or remove the quick launch code block "",
then insert the custom web part snippet code in proper location in seattle master page, then all pages inheriting the seattle master page will have this web part.
Note, please back up the master page before customizing the original master page for recovery.
http://msdn.microsoft.com/en-us/library/office/jj862341(v=office.15).aspx
http://www.sharepointpals.com/post/Add-snippets-in-Page-layout-using-design-manager
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Page not navigating into next page

Similar Messages

Maybe you are looking for