Page num on the payslip

Hi all,
I would like to add (a page num) on the payslip of all persons I select, I am using PE51. Is there any idea about how to do this?
Thanks

Hi,
I've found the solution which is:
I used the table "STAT" with Table field "PAGNO" through (PE51) and (PE51_CHECKTAB) transactions.
Thanks.
Edited by: Benamor Bentebba on Apr 13, 2011 4:26 PM

Similar Messages

Wrong page numer (1) when the numer of printed page is 2 using group

I use crystal XI to print a document (facture) from a program.
When the number of printed lines (details) is the max number is possible to print , the number of page (PageNumber) is wrong because the printed page is 2 (the second page is only a line of notes inserted in a group section).
For the sotfware society of the program the problem is the printer driver but i have tested with more then one driver and the error is the same.
what's the problem?
Sorry! My english is not good.
Thank you.

If the page number is in the page header, and the page header prints on each page, then I cant see what the problem is.
Perhaps it is a printer error. Try a different printer and see if it happens.
If a different printer is the same, try putting the page number in different areas of your report.
If still no change, create a new test report and see if it happens there.

Retrieve and store the last page num. of a report created with the XML Publ

The customer has the need to store the last page number of a report created using XML Publisher technology.
This page number is to be recovered for reuse as a starting page number next to the launch of the report itself.
The last page number would be stored in a custom table. The value passed through the procedure defined in AfterReport pkg.
At the next launch of the report to retrieve the value of the last page of the previous launch BeforReport the procedure.
Can you not retrieve the value when the report is processed?
Now the customer has created a parameter in the report indicating the first page number to be included in the report itself.
The customer has to remember when launching the report on the last page number of the previous launch.
With Report Builder you can do it. But the new reports are made with R12 XML Publisher technology.
Is there anyone who can give us a solution?
thanks
Antonella

If you are new to BI Publisher then what I am going to suggest next may have not much sense.
But, anyways I am sharing this idea with the rest of the community for their benefit.
It is not impossible but requires some work. You will have to have total control of the document generation and process each step individually:
- Process before report generation
- Generate PDF
- Count PDF pages
- Process information of PDF pages
In order for you to do this you will have to use BI Publisher APIs.
xdocore.jar + Versioninfo.jar contain all you need. I just tested it myself.
Thanks
Jorge
p.s if you consider your question answered then please mark my answer either as "Correct" or "Helpful"

Form Page Num and setting its beginning number

Is there a way to tell documaker to start the page numbering process at say page 5 when using the Form Page Num feature?

Hi 808337,
The page numbering is done at the Genprint level, which is why the option PageNumbers is under the printer definitions in your INI file. Up to and including release 11.3 (I have not worked with 11.4, 11.5 or 12), I don't think there's any way you could apply any changes to the numbering.
You could achieve what you are looking for with a DAL script as a post transaction process.
Gaétan

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How can i print all the tab pages not just the first page (tab)

how can i print all the tab pages not just the first page (tab)

You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png ‏3 KB

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

The Mozilla WHITE start page is blocking the upper left Firefox to Print to Print Preview, so i can not see what is on the Printer Glass

The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
I was told i was using an out of date version of Firefox.
But no "click here to update".
So i downloaded the new edition of Firefox.
And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
HEEEELP,,,,,,

Hi,
Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter

Where does firefox cache the form parameters to be used in the reload event of a page that was the resposne of a HTTP POST request?

Suppose there is form in a web page and it submits data in HTTP POST method. After submitting the form, if I reload the page [either by the refresh button or back button; whichever applicable], firefox asks permission to resend the form data by saying "To display this page, Firefox must send information that will repeat any action...". Now if the user clicks on the resend, firefox resubmits the form data.
So where does firefox store this from data for such future resending/resubmission?
Is it possible to retrieve/manipulate those stored form data?

I thought I'd tried that, as tried lots of other things like encoding URL, but obviously not as this works.
Thanks for the quick reply.
We also have an issue with the people results not being able to be refined by Department or Job Title now we have connected the SP2010 farm to use the service applications from a SP2013 farm.
Any ideas on this? I've started a new thread as its unrelated though:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c89d5463-4531-4a28-9586-1f690c7b580d/can-you-refine-people-search-results-using-a-sharepoint-2013-search-service-application-connected-in?forum=sharepointsearch

Login page error in the ISA b2b 5.0 application.

Hi all
i deployed the CRM ISA b2b 5.0 application successfully in the j2ee engine and after that i have done the XCM configuration also successfully and i tested thru run test for both JCO and IPC components all are successful.
now when i tried with the b2b application with the following URL it is giving some different error.it is not related to application it seems the different error related to some browser or i am not sure.
URL : http://hsdnt24s15:50400/b2b/b2b/init.do when i press enter here
then it showing the following error but the error it seems not related to application side, it is different error.after pressing the enter with the above URL then URL itself is changing in the browser as like the following URL
browser URL : https://hsdnt24s15:${https.port.core.isa.sap.com}/b2b/user/secureSwitch.do
Error Details:
The page cannot be displayed
The page you are looking for might have been removed or had its name changed.
Please try the following:
Open the hsdnt24s15:${https.port.core.isa.sap.com} home page, and then look for links to the information you want.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.
Internet Explorer
Please can you help me what is the solution to my problem.
i will reward the maximun points.
Regards
Sunil

Hi Mike
i have some other problem now , can i you help me on this.
i have the logon problem in the CRM ISA b2b 5.0 application when i have accessed thru the following URL.
http://hsdnt24s15.hclt.corp.hcl.in:50400/b2b/b2b/init.do
it is giving the error as follows.
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
before that we have made the XCM configuration for CRM ISA b2b 5.0
Can you guide was there any problem in the XCM configuration?
Please help how to resolve this issue for logon problem in ISA b2b 5.0?
Regards
Sunil

Opens Webmail login page instead of sso login page after changing the webma

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

How to change one iView to another in portal page by clicking the third one

Hi all!
I have created four iViews: two speedometers with web application designer and two iViews with visual composer. I added the speedometers and a visual composer iView #1 to a portal page (default view). The requirement is that by clicking the speedometer #2, the visual composer iView #2 would replace visual composer iView #1 on the portal page. If the user then would select the speedometer #1 again by clicking it, visual composer iView #2 would replace #1 again and so on.
I have read article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b65a5d-f397-2910-a78a-f5544f21c33b?QuickLink=index&overridelayout=true, but it is more about filtering VC iView values with BI web items. I don't need to filter anything, just to change one iView to another in a portal view by clicking a third one.
I have thought of placing two VC iView to a same portal page area and defining one of the to be visible and another hidden (by clicking speedometers these properties would change), but I haven't found the way how that could be done in portal. Is there a way to define some OnClick-method to change visibility parameters or url-address of another iView?
One solution might be¨on the other hand to transfer any value to VC by clicking a speedometer and to change the visibility of the VC iViews according to that value (the speedometer #1 should in that case transfer other value to VC than speedometer #2). I don't know if that is possible with speedometers - you can't reference any characteristics or variables with it.
If you have an idea, what would be the best way to accomplish this requirement, I would be very glad to hear about it! We are in VC 7.0.
Points garanteed!
Regards
Sari

Hi,
In the portal, create a page and place the iView having the three input fields on top. Place the second iView below. Keep differing the second iView for every page. In this way you can make the iView with 3 input fields only in the desired pages. You can use EPCF to invoke / navigate to another iView.
Regards
Srinivasan T

Physical page is not the same in HTML format

I am using Oracle 6i to develop some reports. While running this reports using the developer, the logical page is the same size as the physical page.
When generating the same reports in HTML format the physical pages do not seem to be the same as the logical pages, since the contents of one page is being printed in two pages, whereas using the developer the report will print only in one page. I look at the Layout Model properties and I have set it in the following way :
Layout Main Section
Width : 8.5
height : 11
Horizontal Panels per PAge 1
VErtical Panels per page : 1
Orientation Default
Report Width : 80
Report Height : 66
Any Help will be appreciated

Open you QuickTime movie, go to window and select Show movie properties, select videotrack and change Transperancy (low left) and select Composition in stead of "none - allow dithering" from the drop menu. See if this helps.

Page num on the payslip

Similar Messages

Maybe you are looking for